Hi, general question for the forum about the mobile internet on the BOLT: Have you seen issues with internet connectivity (non 4G related) on your Thunderbolts? I almost always have to go into Settings and uncheck, then recheck the "Mobile networks" field b/c i'll go to the web, to the market, to an app and it won't load because the connections fails when i unlock my phone. If it's seen then i guess it's just an issue with Verizon right now, but if this is not happening to you all please let me know b/c i wanna make sure it's not the Bolt itself.
thanks in advance to peeps who can reply to this.
I have not had that problem since vzw fixed the 4G problem (outage).
Related
I received a Samsung Galaxy S (Captivate) as a gift.
The phone was on AT&T carrier but was unlocked to be used on T-Mobile.
The first problem is that I can't get the 3G to work, I can only see the signal "E" for edge. Does anyone has any solution for that?
I tried to look to seek some help on some forums and the recommended to "Reset Network Setting" to default by going to:
Settings-> Wireless & Networks-> Mobile Networks-> Access Point Names and then Reset to Default.
This did not solve the problem, but it created another issue. Now I cannot connect to Wirless "wifi" connections.
Help Please.
Moving to Q&A
I have Samsung Galaxy S 4G with T-Mobile in San Francisco.
Whenever I go to an area without T-Mobile signal, the phone connects to AT&T. I called T-Mobile and they said that's because T-Mobile has roaming agreement with AT&T so my phone would connect.
The problem is, when my phone connects to AT&T, I can't make any calls. It says the phone's not registered. T-mobile says that's because I'm in an area that has T-Mobile coverage.
You'd think that the phone would be smart enough to figure out that only emergency calls can be made (which is what BlackBerry does and shows SOS sign). The real problem for me is that, I have WiFi calling enabled with cellular preference, and when I'm in the basement of my office building where there is no T-Mobile signal (but there is WiFi signal), my phone thinks it has cellular signal so it doesn't activate WiFi calling, yet no phone calls are coming in b/c it's not registered to AT&T's cellular network.
Is there a way for me to force my phone to only connect to T-Mobile? I know there isn't on the regular settings menu, but perhaps experts could tell me how to do so using those star-sharp keys listed here (http://forum.xda-developers.com/showthread.php?t=842134)?
Thank you!
Set wifi preferred instead of cellular.
Sent from my SGH-T959V using XDA App
Unfortunately, that doesn't work for me because I move around a lot, and Android WiFi calling feature doesn't have handover.
There's got to be a way to prevent this phone from connecting to AT&T at a low level somehow, no?
How do I do that? Have checked the manual but can't find location where explains how to select wi-fi preferred instead of cellular. Your kind advise will be appreciated
Open WiFi Calling and select settings. You'll see Preference. Select Cellular Preferred.
I think in setting then wireless and network, then mobile networks then network operators click the default settings.... select manual and wait for the carrier to pop up.
Will this solve your problem?
Sent from my SGH-T959V using XDA App
scoop_dtx said:
I think in setting then wireless and network, then mobile networks then network operators click the default settings.... select manual and wait for the carrier to pop up.
Will this solve your problem?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
yep manual is exactly what OP should do.
if the settings for network operators are set to manual then u select the network u want and it sticks unless u manually select a different network provider. u are in select automatically mode so the phone can switch all on its own. this should solve your problem as other people have already mentioned
I have tried this many times and works as long you don't turn the phone off. After I forced the phone to manually select T-Mobile I checked many times the default setting and it remained in manual until the phone was turned off. When I switched it back on it was again in automatic mode and switching to ATT when signal is low.
Is there a way to prevent this? If not, well , first thing when phone is on in the morning is to check default setting.
5/24 I finally gave up and sold the phone. Samsung says they have not received any claims regarding this issue eventhough you see it frequently in the forums. I returned back to my HTC HD2 and will wait for the G2.
i know this is not the right forum to discuss my issue but i got no help from my phone section forum.dats y i was forced to submit in this general thread.
i am not being able to use the internet on my GALAXY 3.when i activate the data network nothing happens.PACKET DATA (in settings>wireless>mobile network) always gets unclicked.when i click packet data to activate after sometime it gets unclicked automatically.i have tried 2 service provider connec same prob,installed stock rom,custom(indroid,lestatious,kyrillos) nothing happened.plz HELP.....
Hello fellow S3ers! I am David and I am new here.
I seem to be having a strange problem with my data network connection: My S3 is with Verizon and I have had it for several month now.
This morning everything was working fine down in FL and I hopped on a plane, set my phone to airplane mode, and returned to Philadelphia. After landing and disabling airplane mode, my phone refused to connect to any sort of data network - no 4G, 3G, or 1x. Calling and txting works fine.
I have been searching for a while now with no success. But here is the strange thing: I went into About Phone > Software Update, and clicked "Check now." Low and behold, the 4G icon flashed on and downloaded the latest update! (Which was over 140mb).
The phone updated and restarted, and now it says Software up to date. I saw the 4G icon flash on for a moment after the initial update restart, and then it flashed off. I went into software update again, and clicking Check Now caused the 4G icon to turn on again! It immediately turned off again, however. I was able to repeat this cycle several times, but now the Check now button does not turn the 4G back on at all - even for a moment as it did 10 minutes ago.
Any ideas how to solve this issue or what is going on?
Please let me know if I can provide you with any additional settings or details, but here are some details that may be relevant:
Mobile data: checked.
Network Mode: Global
APNs: None checked, EHRPD and LTE - Verison Internet are white, the rest are grayed out.
Mobile network type: LTE:14
Service State: In Service
Mobile network state: Disconnected
I appreciate your time.
I got the same issue, was working yesterday but today nothing. If I force it to cdma only I can get 3g data but it didn't stick around very long either...
Sent from my SCH-I535 using xda premium
northeast is having data connectivity issues at the moment- I called in and thats what support told me so most likely its the network right now and not your phone with the issue
http://forum.xda-developers.com/showthread.php?t=2183214
Thanks for the quick replies Neo and Chewwy.
Good news, 3G is now up on my device and it appears to be stable for the moment. No 4G yet, but I do have one more question just to make sure I didn't accidentally change something when I was troubleshooting it.
Network mode should be set to Global?
Should a specific APN be selected? Currently, both EHRPD - Verizon Internet, and LTE - Verizon Internet are white and selectable, however none seem to be checked with the little green dot. The rest are still grayed out. Is this normal, or should I select one?
Interesting to hear about the N.E. network issues. I suppose that makes me feel better lol.
Hello there, i just got this phone 3 weeks ago and since i have wifi i didnt test the 3g conection before. i activated a data pack and i just realized that my 3g doesnt come on at all. the screen shows 4g left side of the signal strengh but it doesnt work at all. i got at&t version. i confirmed with my carrier and i did activate data, they even helped me to set up the apn but is still not working. can you helpe me? thanks!
PD: they said they couldnt have done more because they dont support that type of device
Does it say 4G or 4G LTE? The at&t icons are a bit different I'd you're not used to them.
4G = hspa
4G LTE = LTE
So if you're getting the 4G icon you are actually getting 3G hspa speeds.
Sent from my Evita
If another carrier besides AT&T, you will need to find the APN settings for your carrier and manually enter it into Settings>Mobile network settings>Access point names. Select "New APN" and enter the correct settings for your manufacturer.
The 4G icon simply means a network is present, it doesn't mean you are connected to it.
thank you for helping people. whel actualy i wouldnt mind getting 3g network access, the point is that i dont have internet access at all. i called my carrier (Claro - El salvador) and they helped me to set up the apt but is still not working. i was wondering if there is something else i could try to fix this
nevermind, i finally fixed it
Please share the fix so the information is available for anyone who might have the same problem in the future.
Sent from my Evita
Please share the fix so the information is available for anyone who might have the same problem in the future.
Click to expand...
Click to collapse
sorry. well, first i did master reset, once done i set up an apn (carrier provides you with this info), then went to mobile network > network operators > select automatically. once the device found the "CLARO" network i turned data on and got internet service.
Thankyou, these threads live on long after we're finished with them so it's important to have the information readily available for future troubleshooters.
Sent from my Evita
tolonuia said:
sorry. well, first i did master reset, once done i set up an apn (carrier provides you with this info), then went to mobile network > network operators > select automatically. once the device found the "CLARO" network i turned data on and got internet service.
Click to expand...
Click to collapse
I'm guessing you either had not entered the APN info exactly correctly the first time. Or also, after entering the APN you actually have to select it as the "active" one on the list of APNs (making sure it has the colored dot next to it). Maybe it did need a factory reset, but this shouldn't be necessary just to change APN.
Happy you got it figured out.