Hello,
I drive a BMW with car audio handsfree.
It works really nice with this device and all audio funtionalities are fully compatible.
I know that using a Sony Ericsson device is possible to see SMS received on the screen of the car handsfree.
I tried also with Nokia devices but this is not possible.
What Sony Ericsson does more than the other? And obviously is possible to understand what is missing in HTC HD2 bluetooth stack implementation to do the same?
Bisis said:
Hello,
I drive a BMW with car audio handsfree.
It works really nice with this device and all audio funtionalities are fully compatible.
I know that using a Sony Ericsson device is possible to see SMS received on the screen of the car handsfree.
I tried also with Nokia devices but this is not possible.
What Sony Ericsson does more than the other? And obviously is possible to understand what is missing in HTC HD2 bluetooth stack implementation to do the same?
Click to expand...
Click to collapse
here is the list which I have created over the time:
http://www.xoutpost.com/electronics/bluetooth/51388-list-sms-compatible-phones.html
enjoy
My phone is HD2 and installed the rom New Nexus One Android 2.2 Build FRG33 [ mccm v1.5](8.9.2010)
I found that i just couldn't use the buttoms on my bluetooth headset when im enjoying music.
what should i do with this problem?
thx for ur help!
I get this problem occasionally when I link my N1 w/ my car stereo. The controls don't work etc and it's not in audio streaming mode (ie. it's probably only using the Phone bluetooth profile and not the stereo audio profile as well). What I usually do is go into bluetooth settings, long click the device, and uncheck the bluetooth profiles. Then I recheck those profiles and reconnect the device. This usually fixes it. Of course, your problem could also be related to this HD2/Android hackery...
Hi to all
Before I had nokia n97 and a sony DR-BT50 Bluetooth headphone which could connect to n97 and my laptop so easy.
after I buy samsung galaxy s I tried to connect the headphone but no way. the phone can not discover the bluetooth headphone
Before i was on Eclair and try it but could not, after I update to Froyo I had hope to make it work but the problem persists.
here are the bluetooth headphone specifications:
Bluetooth® Technology : Bluetooth Version 2.0
Diaphragm : PET
Function : A2DP, AVRCP, HFP (1.0), HSP (Ver. 1.1, Vol. 2, Part K:6)
Interface : A2DP, AVRCP, HFP, HSP
I was wondering if this is a hardware matter or could connect phone to Bt headset by applying some update.
Anyone have any idea?
Hello! I have dr-bt50 and shw-m110s (korean galaxy). Before froyo i was able to pair devices and translate media to headset. No luck with voice calls though. After froyo pairing is successful too. But when i turn headset off, android forgets about a2dp profile associated with dr-bt50. So i have to unpair device, then pair it again EVERY TIME i want to listen to music or watch a video using headset. This is really sick.
Pyromaniac84 said:
Hello! I have dr-bt50 and shw-m110s (korean galaxy). Before froyo i was able to pair devices and translate media to headset. No luck with voice calls though. After froyo pairing is successful too. But when i turn headset off, android forgets about a2dp profile associated with dr-bt50. So i have to unpair device, then pair it again EVERY TIME i want to listen to music or watch a video using headset. This is really sick.
Click to expand...
Click to collapse
what is the difference between korean galaxy and other galaxies? why that one can discover DR-BT50 but mine can not?
Glitch in de music
Hi i can connect to the DR-BT50 without a problem.
but when i play music the music glitches like the connection isn't fast enough,
or the buffer is to small.
can anyone help??
i'm running:
Galaxy S: GT-I9000
android: 2.2.1
smalband: I9000XXJPY
Kernel: 2.6.32.9
Build: FROYO.XWJS5
rooted: Rage against the Cage
lagfix: oclf 2.0
Thanx
Edit: solved
installed the new xwjs5 rom and problem is fixed
mw600 a2dp devices
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
parkosans said:
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
Click to expand...
Click to collapse
Samsung Glaxy S still running eclair and no problems connecting to SE MW600. Picks it up everytime. Are you following the instructions clearly?
parkosans said:
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
Click to expand...
Click to collapse
I have a MW600 with SGS I9000, I never had any problems (Eclair included).
I'm currently on Froyo 2.2.1 XWJS5. But I have installed all leaked ROMs with no issues too.
I hope to help you.
parkosans said:
i have mw600 sony a2dp bluetooth device and i just buy new samsung galaxy s..
the problem is my galaxy s doesnt even detect my mw600, im not sure about this..
is that samsung galaxy s have a2dp connectivity??
can someone answer this please..
Click to expand...
Click to collapse
Hi, MW600 works well on my SGS since Éclair. Are you pairing it correctly?
here are the instructions from the user guide:
Pairing the headset with another device
1)Make sure the headset is turned off.
2)Turn on the Bluetooth function in the other device
3)Place the other device within 20 cm (8 inches) of the headset.
4)Press and hold down the power on the headset for about 5 seconds until the pairing indicator appears on the display.
5)In the other device: Search for and add a new device.
6)If a passcode is required, enter 0000.
To reset your MW600
1)Make sure the headset is turned off.
2)Press and hold down the power until the pairing indication appears.
3)Simultaneously press and hold down power & call until the headset turns off.
DaRkMyk said:
Hi, MW600 works well on my SGS since Éclair. Are you pairing it correctly?
here are the instructions from the user guide:
Pairing the headset with another device
1)Make sure the headset is turned off.
2)Turn on the Bluetooth function in the other device
3)Place the other device within 20 cm (8 inches) of the headset.
4)Press and hold down the power on the headset for about 5 seconds until the pairing indicator appears on the display.
5)In the other device: Search for and add a new device.
6)If a passcode is required, enter 0000.
To reset your MW600
1)Make sure the headset is turned off.
2)Press and hold down the power until the pairing indication appears.
3)Simultaneously press and hold down power & call until the headset turns off.
Click to expand...
Click to collapse
Hey, do your mw600 fully functional?, i mean the play/pause button, next/previous song, vol button....
I tried on the store, the only working button is the accept call only, i can hear the songs perfectly...but none of the button function
Sent from my GT-I9000 using XDA App
val5 said:
Hey, do your mw600 fully functional?, i mean the play/pause button, next/previous song, vol button....
I tried on the store, the only working button is the accept call only, i can hear the songs perfectly...but none of the button function
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yes, all of the buttons and touch sensitive volume works. Did you try to reset the MW600?
MW600 can pair with 3 devices, maybe during the time that you tested it, your SGS was set as the "calling device" coz usually the first one if it is a phone or mp3 player will be set as the "music source".
You can either reset or manually set your SGS as the "music source" by long pressing the play button and selecting your SGS.
DaRkMyk said:
Yes, all of the buttons and touch sensitive volume works. Did you try to reset the MW600?
MW600 can pair with 3 devices, maybe during the time that you tested it, your SGS was set as the "calling device" coz usually the first one if it is a phone or mp3 player will be set as the "music source".
You can either reset or manually set your SGS as the "music source" by long pressing the play button and selecting your SGS.
Click to expand...
Click to collapse
Thx
Problem solved by uninstalling 3trd party music player, must using the default player...
Oh yeah, is it safe to charge with the galaxy s charger ?
Sent from my GT-I9000 using XDA App
You don't have to reset the MW600 just to pair with another devise, you just need to power off and long press the power, I posted this, 3 posts above.
I tested this with PowerAMP music player and all the controls work.
I've charged mine using SGS charger and USB but I can't say if it's safe, I'm no expert in that.
I Swyped this on my Galaxy S
It seems that the headset sony DR-BT50 is working on XWJS5 rom but not working on the others such as JVP/JVQ, anyone knows which files are involved for bluetooth so port them from JS5 to JVQ ?
taha_e said:
It seems that the headset sony DR-BT50 is working on XWJS5 rom but not working on the others such as JVP/JVQ, anyone knows which files are involved for bluetooth so port them from JS5 to JVQ ?
Click to expand...
Click to collapse
Strange it works on the fly with my set...
It must be something els..
Maybe use a different modem I use the jvo modem
Sent from my GT-I9000 using Tapatalk
Will bluetooth ever work on any version of cm7? I have had several different phones, xperia play, nexus s, lg optimus 3d, and now the infuse. I really like cm7 but without bluetooth its unusable. Is there any way to fix this or will there be?
Bluetooth works, it just doesn't support audio. This is because AOSP ROM's use an open-source BT 2.1 stack (supports things like Wiimotes), whereas Samsung ROM's use a proprietary BT 3.0 stack.
Free/open software can support BT audio. My kubuntu laptop plays audio just fine on my bt headphones, as does my desktop with a $2 2.1 BT adapter. My infuse was able to transfer files to my laptop at ~150-200 kB/s when it was stock froyo, but now it does 16kB/s, which is much less than a fifth of BT 1.2's peak bandwidth, or much less than 1/15 of BT 2.1+EDR's.
My phone with CM7 can also play audio on my headphones, but it stutters because it doesn't have the bandwidth.
Got the Nexus 5 streaming music to my 2012 Toyota Camry, however the AVRCP profiles do not appear to be working correctly. No metadata, and no remote functions (car -> phone via BT). Anyone having any luck with this?
I had a Skyrocket before with CM10.0 (Android 4.1.2) that did the AVRCP profiles perfectly. I know the BlueZ change-over occurred directly after that, why I kept that version on my Skyrocket. I rolled back after it stopped working when I upgraded to CM10.1. But now on the Nexus 5 I'm "stuck" with KitKat.
Thought all this BT profile stuff was fixed in 4.3?
Most likely your Camry's radio will need a firmware update. I'm running into this with my 2010 Volkswagen GTI.
Sent from my Nexus 5 using Tapatalk
That's the thing, the Camry worked fine with my Skyrocket which used AVRCP 1.3. Emailed Toyota and they said 1.3 is supported in the head unit. If KitKat truly supports AVRCP (even if it's 1.4) shouldn't it be compatible (backward compatible).