title asks it all. im going to change rom.
i mean bootloader
soft reset/reset blackstone
press/hold volume down
(quickly before it starts)
*remember to do USPL or HSPL first before flashing a rom.
Related
Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811
crazy_luv said:
Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811
Click to expand...
Click to collapse
Downgrade to another version and then try again!
Just had same nasty esperience about an hour ago. Active syc not working ect.
Resolved by:
pressing together photo and on buttoms then reset underneath; that is both upper buttons on each side at the same time then reset underneath.
This takes you into the bootload mode. Active syc must be on then flush with an original Rom (NOT DOS!)
Forgot! in bootload mode, you screen will be red-green ect.
Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.
rasanansa said:
Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.
Click to expand...
Click to collapse
this guy is right, i did the same but i had to find an original rom for my device with NO VENDOR ID REQUEST, i already found a loader in french... i changed the attacheck nk.nbf file with the english one.. and loaded it to my Phone and it worked fine
Thanks to everyone now i have my phone back
hi i was trying to remove a simlock on an imate jamin, and wrongly i used the anternaunlocker. it flash the radio out form my jamin and put a modifed radio file on it and when i try to restore it, it stuck in the middle and when i turn it of and try to turn it on again there is notting only a black screen no indecater that the jaminin is working? i did take a backup .nb file. can anyone help me to recover the jamin please
Are you able to enter bootloader?
If yes, flash RUU_Prophet_220734_2207114_024721_NVID when in bootloader.
After that you should be able to boot your prophet and flash the backup file using pdocwrite.
no
No it can not be in a bootloader mode. its just a black screen its there any way to forse boot it?
make the cadle mod to enter the bootloader. morning i search for the right thread ... its 2 am in austria @[email protected]
HOW I can make the cadle mod to enter the bootloader my prophet ??
bootloader
smootny said:
HOW I can make the cadle mod to enter the bootloader my prophet ??
Click to expand...
Click to collapse
keeping the camera button pressed insert stylus into the hole next to the usb connector on the device. remove the style but keep the camera button pressed til you se the tri color of the bootloader. then you can flash RUU_Prophet_220734_2207114_024721_NVID
I have a sitronics smartphone its the same as the imate spl. I installed wm6.1 but i can't install t9 on it so i tried to downgrade but when i try to a white screen comes up when i press 6 and power button.
hi everyone, i findout how to downgrade 1.24 to 1.19
1. use sda unlocker, unlock the phone
2.hard rest (phone power off , press volume button up and power off button (red button ) ,when you see it ask you restore, you just press SEND BUTTON(green button) 2time, and will be restore) <<<very inportant this step
3. use Dash3G HardSPL1.19 by JockyW ,copy hardspl-maple-1.19.nbh from original spl file, and delete hardspl-maple-1.19.nbh , and then click auto.bat
4.follow the guide will be work when you all done ,,go in thicolour mode will see spl it's 1.19
5.when you see your spl it's 1.19, after you can delete hardspl-maple-1.19.nbh and copy back hardspl-maple-1.19.nbh ,and then click auot.bat
6. if ok, your spl will be 1.19hard
sorry for my english
this 100% work for my htc snap s520 spl1.24
yuwai said:
hi everyone, i findout how to downgrade 1.24 to 1.19
1. use sda unlocker, unlock the phone
2.hard rest (phone power off , press volume button up and power off button (red button ) ,when you see it ask you restore, you just press SEND BUTTON(green button) 2time, and will be restore) <<<very inportant this step
3. use Dash3G HardSPL1.19 by JockyW ,copy hardspl-maple-1.19.nbh from original spl file, and delete hardspl-maple-1.19.nbh , and then click auto.bat
4.follow the guide will be work when you all done ,,go in thicolour mode will see spl it's 1.19
5.when you see your spl it's 1.19, after you can delete hardspl-maple-1.19.nbh and copy back hardspl-maple-1.19.nbh ,and then click auot.bat
6. if ok, your spl will be 1.19hard
sorry for my english
this 100% work for my htc snap s520 spl1.24
Click to expand...
Click to collapse
There's already a thread open with that ropic http://forum.xda-developers.com/showthread.php?t=550620
Many members have asked about this in the mentioned thread. Please post in the thread, this will avoid cluttering the forum
on that note, thread closed.
After a soft reset (using down side button with stylus) my HTC Kaiser only boot on HardSPL 3.29 tri-color screen.
Only "Power on" -> "Tri-color screen". Without press power and camera button.
I already try to flash HardSPL 3.59 using KaiserCustomRUU.exe... All works perfectly.. but when reboot.. HardSPL 3.29 tri-color screen is showed
I already try to flash Another kernel using Atools... with KAISIMG.nbh on SD... The flash occurs all right.. but when reboot.. HardSPL 3.29 tri-color screen is showed.
OMG, I really don't know to do.
Any suggestion??
I will be grateful for any help.