Database Info

Radio rom upgrade problem

new problem
I upgraded my s200 to room 2.63.90 and now my phone is blocked. When i turn it on there is no radio rom version. In windows phone has no gsm signal, is very slow & orange led is on. I cant conect it to activeSync, i tried to load other version of radio or rom but...
damm, i have no lock with upgrading
please help

hjuuh,
it is back..alive
i went to bootlander and upload new rom

it would help if you post this stuff on the original thread, not all over the place !
http://forum.xda-developers.com/showthread.php?t=282066

Help!
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
SPEEEED said:
hjuuh,
it is back..alive
i went to bootlander and upload new rom
Click to expand...
Click to collapse

joyride said:
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.

Thank you for your help! I upgrade a new Radiorom 2.47.11 and it work well!
elantra_no1 said:
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Click to expand...
Click to collapse

HELP ME MY QTEK S200 Does not respond

Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811

crazy_luv said:
Quote:
Originally Posted by jackass00
Use this rom "NB_Up_nghianga.rar" from this link.
ftp://ftp.xda-developers.com/Uploads.../Prophet-roms/
ActiveSync(4.5)must be open.
Duble click and run this"UPGRADE_ROM.bat"
And wait..initilaze.and wait.14 minutes.
And working stabile.Opening green new wm6 logo.
i installed this version on my qtek s200 and after installation it said hard reset your phone i did it, Now my phone starts showing a white screen but nothing else is working, Active sync 4.5 detects the device but it never connects.....
HELP ME !!!
Notes IPL: 2.09
SPL: 2.09.0000
GSM: 02.47.21
OS 10.1.0.811
Click to expand...
Click to collapse
Downgrade to another version and then try again!

Just had same nasty esperience about an hour ago. Active syc not working ect.
Resolved by:
pressing together photo and on buttoms then reset underneath; that is both upper buttons on each side at the same time then reset underneath.
This takes you into the bootload mode. Active syc must be on then flush with an original Rom (NOT DOS!)

Forgot! in bootload mode, you screen will be red-green ect.

Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.

rasanansa said:
Just read this from another trend. The important thing is to get into bootload mode.
<<<<<<<<<<<<<<<<<<<<<<<<<
Start your device in bootloader mode (hold the comm manager button for about 5 secs while pressing the reset) and then run the upgrade again.
While in bootloader the screen will show three colours. Once in bootloader the device will connect to the PC.
Click to expand...
Click to collapse
this guy is right, i did the same but i had to find an original rom for my device with NO VENDOR ID REQUEST, i already found a loader in french... i changed the attacheck nk.nbf file with the english one.. and loaded it to my Phone and it worked fine
Thanks to everyone now i have my phone back

I used AthenaUnlocker on prophet wrongly is my jamin dead?

hi i was trying to remove a simlock on an imate jamin, and wrongly i used the anternaunlocker. it flash the radio out form my jamin and put a modifed radio file on it and when i try to restore it, it stuck in the middle and when i turn it of and try to turn it on again there is notting only a black screen no indecater that the jaminin is working? i did take a backup .nb file. can anyone help me to recover the jamin please

Are you able to enter bootloader?
If yes, flash RUU_Prophet_220734_2207114_024721_NVID when in bootloader.
After that you should be able to boot your prophet and flash the backup file using pdocwrite.

no
No it can not be in a bootloader mode. its just a black screen its there any way to forse boot it?

make the cadle mod to enter the bootloader. morning i search for the right thread ... its 2 am in austria @[email protected]

HOW I can make the cadle mod to enter the bootloader my prophet ??

bootloader
smootny said:
HOW I can make the cadle mod to enter the bootloader my prophet ??
Click to expand...
Click to collapse
keeping the camera button pressed insert stylus into the hole next to the usb connector on the device. remove the style but keep the camera button pressed til you se the tri color of the bootloader. then you can flash RUU_Prophet_220734_2207114_024721_NVID

Flashing Rom tutorial request

Hello everyone. My Fuze, which I will be getting next week, will be my first WinMo SmartPhone (my first smartphone for that matter as well), and as suggested, I will flash the rom to get rid of AT&T Bloatware and to have my device run faster. The only problem I'm having is that I can't find a tutorial for flashing the fuze anywhere, on google or here.
I was just hoping if someone can put up a guide or a link to a guide for this newbie. I have downloaded the Elite Team Rom and everything, but I'm not sure what things, such as HardSPL and what not are or why I need them.
Basically, I'm new at this and I would like some guidance.
Thank you.

Here's a short summary that may be of use:
Step 1: Install Activesync, get your device sync'ed up (as a guest is fine, you don't need to pair it)
Step 2: Download HardSPL, and follow the included instructions. This only needs to be done once, the reason is to allow your phone to accept ROM's from other sources (like here)
Step 3: Download the ROM you want to install. Should come with a .nbh and an .exe, run the .exe and follow the onscreen instructions to install the ROM.
Should you need to revert to the stock ROM for some reason, reverse the steps (download and install stock rom, then stock SPL)

How to HardSPL unlock your phone. (http://forum.ppcgeeks.com/showthread.php?t=42503)
) You're running the installer from the computer, making what's on the phone irrelevant.
a) make sure you have .NET framework installed on your PC! if not, get it from
http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
a) Raphael_CDMA_HSPL_037.zip is for normal
b) Raphael_CDMA_HSPL_025_MFG.zip is for development/hacking
) you must Have Phone Synced with PC in ActiveSync/Windows Mobile!
) run Raphael_CDMA_HSPL_037.exe (or maybe 025, if you want to experiment with MFG SPL),
) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
) It should want to flash from version 1.03.651.3 to version 0.37.hspl
a) The Phone should go to a tricolor screen now and say 0.25.C-SSPL.
b) If it does not goto the tricolor screen, see NOTE 2.
) SPL flashes, device automatically reboots, job done.
) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.37.CMONEX (or 0.25.CMONEX MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio.
boot loader mode:
Boot Loader Mode - Touch Pro
) Turn off phone (top button)
) Press Vol. down + enter and then turn on (top button)
) will prompt you to turn off phone (yes)
) Now that it's really off, press Vol Down + enter and turn it on (top button)
) you should now see the tricolor screen
) To get out of it, simply use your stylus to reset the device.
How to Flash a custom rom onto the phone.
) MUST HAVE THE PHONE HSPL UNLOCKED FIRST!!!
) Format microSD card to FAT32. (format <drive letter>: /FS:FAT32)
) Just drop the rom.nbh (or whatever it's named) file in your storage card root, rename it
to RAPHIMG.nbh and voldown+enter+power and BINGO BANGO, ready to flash.
XXX) or Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
) When your Touch Pro tells you to do so, press the power button to begin the flash process.
If you do not get the message to press the power button to flash, there is a mistake in
the name of the NBH file or you do not have the file at the root of your microSD card.
) When flashing is complete, perform a soft reset.
How to get back to stock (if you have to return it, etc...)
) Must still be unlocked aka hardSPL as with all dumped roms
) reflash the Stock Sprint Rom to the phone
) run the relocker

Did you look at the Raphael ROM Development forum? There is a Sticky there very nicely written by mskip. Strangely enough it's called:
[Resources] Flashing your First Raphael Rom (For Newbs)
And yes those instructions work perfectly on the Fuze.
-e

thats a great detailed help up there wish i had that when i first did it
but heres my dumb noob question
changing the radio
#1 is it worth it? i have a fuze and running romeos
and what must i do if it would help?

how to unlock tytn II

hi! i am from the philippines.I bought a secondhand tytn II last october. My sim card worked with this phone and so I didnt know that the unit was sim locked to a certain network until I changed the sim card a few days ago. Ive read from different sites that I can do the sim unlocking of my phone personally but I'm really new to this thing and I'm afraid that I'll "brick" my phone. I already upgraded my phone to wm6.1. I read form you site an instruction on how to unlock the phone but I think it works for wm6 phones only.Here are some information about my phone:
R 1.65.17.56
G 25.83.40.02W
D 3.28.00.00
KAIS130 MFG
SPL-1.0.Olipof
CPLD-8
If you know of any way to unlock a wm6.1 phone, please help me...or if there's none, please just send me instructions on how I can change my os to wm6 so that I can follow the instructions below:
Thank u in advance!
Btw,here are the instructions I mentioned:
Instructions
============
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here: http://forum.xda-developers.com/showthread.php?t=349375
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
7. Once Windows Mobile has booted up it will show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
You should see this:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
Your Unlockcode = 12345678
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
9. Once Windows Mobile has booted up it will again show the "Simlock" window. Now enter the 8-digit unlockcode and your phone is permanently SIM unlocked
10. Download the original radio from http://forum.xda-developers.com/showthread.php?t=349375 to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to some other great tools which I will release soon: "Kaiser SuperCID" and "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW

please don't double post
thread closed