Related
This guide was taken from AndroidCentral and I thought I would share it here because it's taken me 4 hours this morning to figure out why I was having so many problems trying to flash a recovery image when I know my phone was rooted and flashed in order to get 2.1 a month or so ago. I have been searching these forums and google and hope anyone else who has my issue finds this post.
1. Make sure you have the Android SDK installed.
2. Download flash_image.zip
3. Download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
Hope this helps. All credit goes to gbhil at Android Central.
You might want to change the title of the post. People might get confused thinking you found a way to downgrade the hboot and not how to flash the recovery image.
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
This won't work for the leak that was put out today. You lost root. This process requires root.
bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
If you used the new RUU that was leaked today you're screwed. The older 2.1 leaks were test ROMs that were already rooted so you could use the instructions above to flash the RECOVERY. Notice recovery in bold, not bootloader. Once hboot is updated there is no known way to downgrade so you could use an older RUU file.
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
So they can't run an older ruu with 1.5?
HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
To clear that up, if you run the RUU you have no root. If you extract the ROM, set it up, and flash it, you will preserve root, just like damageless made for all of us. But, yeah, you are not gonna be able to get back from this one. at least until someone figures it out.
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
celemew2 said:
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
Click to expand...
Click to collapse
Did you get wifi tether version 1_60? That's the only version that ever worked for me.
Yeah, I have 1.60 installed on my phone right now, but when I try to start tethering, a SU Request black screen comes up and nothing happens until I get an error, "Activity SU Request (in application Superuser Permissions) is not responding."
I'm sure there's an answer somewhere, but lately I haven't been having luck searching for it.
Edit:
Thank you 98classic! All I had to do was enable USB Debugging. (I had it turned off cause I didn't like the warning up top when my phone was plugged into the computer)
"flash_image not found" what the f**k
need the binary? physically check its there with a root explorer
Sent from my broken Typewriter!!!
or do this download and set up the android SDK it itself includes the flash_image binary. after that u will need to open a command prompt on your computer u will have to change directory to platform tools
cd /path/to/platform-tools
after that u will get the chance to do
flash_image recovery /path/to/recovery.img
that will flash the recovery
now reboot into recovery
Typed from my broken Typewriter!!!
ROOT Status of RUU_Hero_C_Sprint_2.27.651.5_R_signed_release : YES
Update: Regaw finally made it for us all! More info here http://forum.xda-developers.com/showthread.php?t=694572
======================================================
I noticed that someone has mixed up the TEST RUU and the RELEASE RUU. However they are different. The test RUU has su file built inside, other than the release RUU!
I flashed RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.exe and i love it very much.
This update is very great, except that I lose my root access. And I tried every method to get root back again but failed.
1. Using asroot2 to root - Failed
I followed the Sticky GUIDE "How to Root the Sprint CDMA Hero", but failed when running
Code:
/data/local/asroot2 /system/bin/sh
The process was killed.
I know the linux kernel changed to 2.6.29 with the update. Maybe that is the reason why asroot2 does not work.
2. Using flashrec to flash a custom recovery image and then get root - Failed
I installed FlashRec 1.1.3 from zenthought's website, but failed when I tried backingup my recovery image.
3.Using adb to push the su file into the phone - Failed
I dump the su file from damageless's rom and flipz's Fresh 2.1.1 rom. Then using adb to push it into /data/local/ and chmod it to 4777, but running failed. It just said "Permission Denied". However, i push a busybox file into /data/local/ and chmod it to 4777, the busybox command runs ok.
KeithKris pointed that Su doesn't work on /data because that directory is mounted nosuid.
4.Using fastboot to flash a custom recovery image and then get root - Failed
I reboot my phone into fastboot, then connect it to PC using USB. I tried this command "fastboot boot recovery-RA-heroc-v1.6.2.img" but faild, it said "downloading 'boot.img'... FAILED (remote: not allow)".
5.Trying to flash back to RUU_Hero_C_Sprint_2.20.651.1_signed_test.exe - Failed
It said "Error 140: BOOTLOADER Version Error!".
Although regaw_leinad has pointed that the md5s on both(release version and test version) hboots are the EXACT same.
b819083aa9fe456c5a5fbde4917980e2
and
b819083aa9fe456c5a5fbde4917980e2
Click to expand...
Click to collapse
Thanks regaw_leinad for your kind help.
Update: 6. the Volex method - Failed
this volex method is revealed here. Already tested by regaw that 2.1 patched it. It doesn't work.
======================================================
After all these failures, there seems to be at least two ways to get the root back. And regaw_leinad and other guys are working hard on them.
1. Try to make a new asroot2 to exploit the linux 2.6.29/android 2.1 on our cdma hero. Here is the source code of our asroot2 -- heroc 1.5 exploit tool.
2. Try to hack the RUU file (actually we mean the rom.zip in the RUU.exe) and make sure it will pass the Bootloader check and signature check(maybe md5?). Then we could flash a RUU with su built inside and get the root back.
If anyone knows something about how to pass the signature check(maybe md5?) or linux kernel exploit, please share your wisdom. Thank you.
This post will be updated every day until the way to root comes out.
Update: Thanks to the donators in this thread! I believe the devs will find the exploit method soon with your support!
======================================================
BTW: Never ever flash the official 2.1 release RUU.exe unless you know what you are doing. You won't get root access until the exploit method has been found. If you do love the official update, you may flash this damageless's rom dump from the official 2.1 release. And the radio dump from the official 2.1 release is here1 and here2 (thanks to damageless and flipz, and remember flashing radio at your own risk). The only difference between damageless's dump and official RUU's system part is that it has root and busybox and it removed some useless apks.
would it be more like fastboot boot /sdcard/recovery-RA-.........img?
justinisyoung said:
would it be more like fastboot boot /sdcard/recovery-RA-.........img?
Click to expand...
Click to collapse
I tried /sdcard/recovery....img again, faild. Because in this command the image file should be on the PC not on the phone.
1. Make sure you have the Android SDK installed. Read HERE for more info.
2. Download 4shared.com - online file sharing and storage - download flash_image.zip
3. Download 4shared.com - online file sharing and storage - download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
__________________
elhead17 said:
1. Make sure you have the Android SDK installed. Read HERE for more info.
2. Download 4shared.com - online file sharing and storage - download flash_image.zip
3. Download 4shared.com - online file sharing and storage - download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
__________________
Click to expand...
Click to collapse
Sorry dude, there is NO su file in this released version of RUU.
So you won't run su after adb shell
just a question but can you successfully run the testkeys release RUU on your phone?
I thought with new 2.1 update root access was removed and there was no way workaround to get root access. I might be wrong here.
You might want to try RUU back to 1.56 version and try to gain ROOT access and just flash ROM release by the dev's here which still give us ROOT access.
I'm not sure if it even possible to go back from 2.1 to 1.5 RUU. Maybe some with more knowleadge of RUU can chip in here.
In addition the RUU you flash is same one release by Devs here on their modify ROMs.
i dont think it is possible to ruu back to 1.5. i think a dev said something about hboot being updated so it needs a new way for root.
kashb91 said:
i dont think it is possible to ruu back to 1.5. i think a dev said something about hboot being updated so it needs a new way for root.
Click to expand...
Click to collapse
You are correct sir. There's no way to downgrade hboot (without root), just like why you can't run the 1.29 RUU if you ran the 1.56, or yours came with 1.56 on it.
F.A.I.L.
10chars
aside from people who "accidentally" installed RUU, The push to quickly root this release is probably low priority, first of all this phone is probably end of life, so the chances of it coming out of the factory with 2.1 on it are slim.
2nd I imagine when the Evo gets released this forum will become a ghost town as far as new development is concerned
gunnyman said:
aside from people who "accidentally" installed RUU, The push to quickly root this release is probably low priority, first of all this phone is probably end of life, so the chances of it coming out of the factory with 2.1 on it are slim.
2nd I imagine when the Evo gets released this forum will become a ghost town as far as new development is concerned
Click to expand...
Click to collapse
well, I'll be around here unless someone buys me an EVO &
It is actually possible to go back to 1.5 even if you used the RUU (well I should say the test RUU). I just did it yesterday so I could take my phone in for service. I'll post how I did it when I'm not mobile. Basically I created an update package to flash the old hboot then used a combination of the 2 main unroot threads. Ended up being able to use the sdcard method after flashing the misc.ing from the other method. I know probably doesn't make sense but I've got it all documented at home.
eme82 said:
It is actually possible to go back to 1.5 even if you used the RUU (well I should say the test RUU). I just did it yesterday so I could take my phone in for service. I'll post how I did it when I'm not mobile. Basically I created an update package to flash the old hboot then used a combination of the 2 main unroot threads. Ended up being able to use the sdcard method after flashing the misc.ing from the other method. I know probably doesn't make sense but I've got it all documented at home.
Click to expand...
Click to collapse
I can't WAIT to read how you did this! I have been dying to get back to original HBoot since I ran the first test RUU back in April.
gunnyman said:
aside from people who "accidentally" installed RUU, The push to quickly root this release is probably low priority, first of all this phone is probably end of life, so the chances of it coming out of the factory with 2.1 on it are slim.
2nd I imagine when the Evo gets released this forum will become a ghost town as far as new development is concerned
Click to expand...
Click to collapse
Well, if we are able to root this Sense 2.1 then theoretically the same root method may work on the Evo, thereby cutting down our wait for a rooted Evo. Just a thought.
chuckhriczko said:
Well, if we are able to root this Sense 2.1 then theoretically the same root method may work on the Evo, thereby cutting down our wait for a rooted Evo. Just a thought.
Click to expand...
Click to collapse
Very very good point I'm not getting an evo till its rooted anyway
chuckhriczko said:
Well, if we are able to root this Sense 2.1 then theoretically the same root method may work on the Evo, thereby cutting down our wait for a rooted Evo. Just a thought.
Click to expand...
Click to collapse
Possible, but I doubt it.
Chances are it's an entirely different kernel. My guess is the EVO gets a 2.6.30+ Kernel - It's hardware is completely different from ours. QUALCOM doesn't even make our chipset any more.
I updated to 2.1 using damage sprintupdate2.zip. I want to use wifi-tether now. Where can I find the version I need for this particular build? I looked on wifi-tether website, but it says the 2.1 compatible version is for Nexus One. Is there even a version for Eclair for the Hero?
Would build wireless_tether_2_0_2-pre9.apk for the N1 work?
zemerick said:
I updated to 2.1 using damage sprintupdate2.zip. I want to use wifi-tether now. Where can I find the version I need for this particular build? I looked on wifi-tether website, but it says the 2.1 compatible version is for Nexus One. Is there even a version for Eclair for the Hero?
Would build wireless_tether_2_0_2-pre9.apk for the N1 work?
Click to expand...
Click to collapse
I'm still using pre6 seems to be the one for the Hero.
zemerick said:
I updated to 2.1 using damage sprintupdate2.zip. I want to use wifi-tether now. Where can I find the version I need for this particular build? I looked on wifi-tether website, but it says the 2.1 compatible version is for Nexus One. Is there even a version for Eclair for the Hero?
Would build wireless_tether_2_0_2-pre9.apk for the N1 work?
Click to expand...
Click to collapse
Here's the link: http://code.google.com/p/android-wi...ireless_tether_1_60_htc.apk&can=2&q=HTC+Donut
Scroll to the bottom for a fix to the newest clockwork recovery flasher...
UPDATING TO DI07
First things first, you must update to the latest firmware and kernel, but in order to do this you must un-root and return to the stock kernel in order to avoid problems.
Simply download the zip here, and run the run.bat inside, after extracting the folder to your desktop.
You must have debugging mode enabled for this to work.
Once that's finished you can update to DI07 using the stock recovery. You do this, like any other update, by renaming the zip (found here, to update.zip on throwing it onto the root of your sdcard.
Then, boot up into the stock recovery (power+camera+volume down) and press home to apply the update.zip.
The update will install and your phone will reboot into DI07.
First boot will take some time, so be patient.
Now onto the fun part, rooting your phone.
OBTAINING ROOT
Just as you obtained root before DI07, you obtain root on DI07, if you have the right tools. Download the one click root here, and once more extract the included folder to you desktop, make sure you have usb debugging enabled, and run the run.bat. Your phone will reboot, and you will have root.
FLASHING CUSTOM RECOVERY
Here is where it gets a tad bit more complicated. First off, you have to download the zip here, but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Now the command prompt should close, and you can run the run.bat for build 31 of clockwork recovery flasher. Once more, your phone will reboot and after the script is done running and says "press any key to exit...." you can press enter and boot into recovery.
That's it, three simple steps to updating, obtaining root, and flashing clockwork recovery!
Also, don't forget to check out my ROM coming later today, as well as noobnl's Andromeda Galaxy ROM v1, just released.
great tutorial...and i can use these instructions even if i am using aridons v4 rom and heros overclocked kernel?
Well, it basically reverts you back to the stock kernal, so you will for sure lose the overclocked kernal. However, I'm not sure about the ROM. Your best bet would be either to hold off on this as the ROM you are suing isn't based on DI07, or flash to stock and then follow this guide. Your choice.
bubby323 said:
Well, it basically reverts you back to the stock kernal, so you will for sure lose the overclocked kernal. However, I'm not sure about the ROM. Your best bet would be either to hold off on this as the ROM you are suing isn't based on DI07, or flash to stock and then follow this guide. Your choice.
Click to expand...
Click to collapse
Well I just ran this and at first glance, it got me right into clockwork. I selected one of my nandroid and restored it. After the phone finished restoring and everything, I wanted to make sure that I still had clockwork but instead it was stock recovery once more.
Since I still had root, I redid the steps starting with entering the commands, then I re-ran the bat file for clockwork. I checked and clockwork is back...unknown as to how long though.
Thank you!!! the remount rw was what I needed to get the clockwork custom recovery to flash!!!
I have another question for you? Is it possible to install the custom recovery without having root? I suspect not? The reason I ask is that I would like to have a nandroid backup of the completely stock rom although I guess I could use the one noobnl has posted
well, i got back to a stock rom....applied the stock kernal...but when i went to apply the update.zip...it took me back to clockwork...not the stock recovery....so i tried to apply the update from there but it aborted...how do i get rid of clockwork so i can go into stock recovery and will that fix it?
mrkrabs said:
well, i got back to a stock rom....applied the stock kernal...but when i went to apply the update.zip...it took me back to clockwork...not the stock recovery....so i tried to apply the update from there but it aborted...how do i get rid of clockwork so i can go into stock recovery and will that fix it?
Click to expand...
Click to collapse
Three options I can think of- if you use adb reboot recovery I believe it will load the stock recovery- the other option is to use odin to go back to complete stock. Finally you could use the option for clockwork in this thread look for the link under "B]Update.zip (for clockwork recovery and includes all the listed apps below)"
EDIT: I can confirm that "adb reboot recovery" loads the stock recovery when you have clockwork
bubby323 said:
FLASHING CUSTOM RECOVERY
Here is where it gets a tad bit more complicated. First off, you have to download the zip --- but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Now the command prompt should close, and you can run the run.bat for build 31 of clockwork recovery flasher. Once more, your phone will reboot and after the script is done running and says "press any key to exit...." you can press enter and boot into recovery.
Click to expand...
Click to collapse
Im having a little issue with this. Im running windows 7. Can I do this in windows 7? Also when it says redirect it to your C:/Android---- do I have to change the drive to ex. cd c:/ first or do i just type in the command prompt C:/android-sdk-windows/tools and hit enter and follow the rest of the commands? Sorry extreme noob here..
Thank you for any help!!
I have ClockworkMod Recovery installed, how can I get into the stock recovery to apply this?
Look 2 posts up
Sent from my SPH-D700 using XDA APP
You need to use the DG27 uninstaller instead of the DI07 uninstaller to update to DI07.
The DI07 uninstaller is just to go back to stock DI07 kernel if you already updated
DG27 uninstaller: http://www.sdx-downloads.com/devs/noobnl/one.click.stock.&.root.uninstallerv1.0.1.zip
I think it needs to be pointed out that this alone won't work if you are like me and have removed apps from the phone. All those apps must be restored in addition to reverting to stock kernel before the OTA update can be applied. At least that's how I understand it. Feel free to correct me if I'm wrong.
Thanks a lot, I appreciate step-by-step tutorials like this for noobs like myself ... this made things a lot easier since some of the stuff (files, instructions, etc.) was all over the place.
would seem that way because I removed the alarmclock to start and when i try to run update.zip from sd it fails when checking current system @ /system/app/AlarmClock.odex
i tried rerooting and reinstalling alarm clock using the backup from titanium. says it is successful but i do not find it in my apps drawer. it still fails there too..
WisdomWolf said:
I think it needs to be pointed out that this alone won't work if you are like me and have removed apps from the phone. All those apps must be restored in addition to reverting to stock kernel before the OTA update can be applied. At least that's how I understand it. Feel free to correct me if I'm wrong.
Click to expand...
Click to collapse
Titanium backup does not restore apps in /system. You have to restore those by hand.
Im officially struggling, undid the root then copy/paste the update to the sdcard, renamed it. It unzips but says its failed to open /sdcard/update.zip(no such file or directory)...suggestions?
I know that in the step it said to copy it to the root on the sd but im am very green to this stuff, and didnt see a folder marked that, therefore I just copied it to the sd card
I can't get Clockwork to flash now. I walked through the steps...I did the remount crap and ran the bat and it rebooted the phone but when i reboot into recovery it goes to the normal recovery screen. Now if I try to redo it it does not recognize the remount rw and i can't get anywhere with it and i'm stuck with no clockwork.
but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Click to expand...
Click to collapse
This part is unnecessary because the recovery zip comes with adb built in
is there a manual way to push this to the phone? These one clicks never seem to work for me ever it's just easier to do it myself.
Whosdaman said:
This part is unnecessary because the recovery zip comes with adb built in
Click to expand...
Click to collapse
No you must do this in order to get clockwork.
I am thinking about rooting my Nexus S I love Stock google and I love how I can get OTA updates instead of waiting for carriers to update them then waiting ..... If I root my phone can I get the OTA updates still or can I reverse it so my phone is like it never had anything ever on it so I can update it fine as if Ive just bought it from a store.
thanks.
You can still receive OTAs with root as long as you're not on a custom rom that has the update script disabled (which most do). If youre on stock rom rooted then you will receive the update when it comes. Should you choose to update through the OTA, you will lose root. Most likely you could re-root it again thereafter.
Sent from my Nexus S using XDA App
aww thanks so lets say I root tommorow I can get updates aslong as i dont install something like Cyogen or what ever it is called is the clockwork recovery just something for restoring and doesnt involve updating?
Also updates always get incorporated into custom rims so if you're on one you don't really have to worry about it.
Rooting the version of android you have won't keep you from getting updates. If you change the recovery image the update will download, but the install will fail.
Rooting a Nexus is pretty easy if you have the android SDK installed.
Just type in the following commands (you'd have to download superuser.apk and su and place them in the platform-tools folder of the SDK)
adb remount
adb push su /system/bin/
adb push Superuser.apk /system/app/
adb shell chmod 6755 /system/bin/su
adb shell exit
adb reboot
If you type in adb remount and it fails to mount type in "adb root" then do the steps above.
hawaiian said:
Rooting the version of android you have won't keep you from getting updates. If you change the recovery image the update will download, but the install will fail.
Rooting a Nexus is pretty easy if you have the android SDK installed.
Just type in the following commands (you'd have to download superuser.apk and su and place them in the platform-tools folder of the SDK)
adb remount
adb push su /system/bin/
adb push Superuser.apk /system/app/
adb shell chmod 6755 /system/bin/su
adb shell exit
adb reboot
If you type in adb remount and it fails to mount type in "adb root" then do the steps above.
Click to expand...
Click to collapse
by recovery image is this the clockwork for example becuase that needs to be installed for root doesnt it :/
Rooting
Here's a great webpage on how to root the Nexus. You don't have to push the recovery image to the phone most people do so they can install custom roms. If you just want to root your stock rom you don't have to load the recovery image.
http://jaxov.com/2010/12/unlock-bootloader-root-nexus-s-on-android-2-3-gingerbread/
hawaiian said:
Here's a great webpage on how to root the Nexus. You don't have to push the recovery image to the phone most people do so they can install custom roms. If you just want to root your stock rom you don't have to load the recovery image.
http://jaxov.com/2010/12/unlock-bootloader-root-nexus-s-on-android-2-3-gingerbread/
Click to expand...
Click to collapse
Its also helpful to have a recovery image to maintain backups of your phone
Thanks for now id just like root adverts pee me off they kill phone speed. Id like to use other stuff too
Sent from my Nexus S using XDA App
Can I still got OTA if I use rom manager to flash recovery temporary or write something into /system/?
Coz I wanna use the Adblocker to remove ads but seems it will modify some file.
I have Alcatel OT 995 with Android Gingerbread 2.3.6 and use Ubuntu. I tried Superoneclick (but it works with 2.3.5 :/ ), Casual (doesn't work), Superuser.apk.. all without effects. Anyone has any suggestions?
Hi I did it the following way (Alcatel OT 995):
Get the android sdk, run path_to_sdk/tools/android sdk and install the platform-tools (you need adb and fastboot, they then are placed into path_to_sdk/platform-tools )
Get the cwm recovery for the device from hxxp://dump.pargon.nl/alcatel/cwm-recovery/
Get the su binary (arm) from superuser.apk: hxxp://androidsu.com/superuser/
Follow hxxp://dump.pargon.nl/alcatel/cwm-recovery/README for how to boot into cwm recovery
Inside recovery go to the mount menu and mount /system (and it is a good idea to use the backup menu item before doing this all )
Unpack the su binary somewhere and do adb push path_to_your_su/su /system/bin/su
Use adb shell chmod 4755 /system/bin/su to give it proper rights.
Boot back into the android system, run Superuser.apk, it will, of course, tell you if it worked.
Maybe you should include the device Name into the Thread title because rooting is a somewhat device specific issue.
Oh it seems someone here decided to be unfriendly to new users so hxxp==http...
Try memprodroid
tamtamtam23 said:
I have Alcatel OT 995 with Android Gingerbread 2.3.6 and use Ubuntu. I tried Superoneclick (but it works with 2.3.5 :/ ), Casual (doesn't work), Superuser.apk.. all without effects. Anyone has any suggestions?
Click to expand...
Click to collapse
If you only want root, otherwise want to stick to a stock system, the most conservative method (rooting, no tampering with any other ROM partitions) is mempodroid. It only works within a specific range of linux kernels (it relies on a bug that got introduced into linux kernel but was fairly rapidly stomped on), but I think 2.3.6 kernel is probably one of them. See http://forum.xda-developers.com/showthread.php?t=1461736 for details. If it doesn't work (you don't have the right kernel), you haven't broken anything, you just won't have root.