Testing An OverClock.? - Thunderbolt General

I am curious if someone knows of a good torture test that we can put our phones through so we know they are stable at a certain overclock? I know setcpu has one.. but have switched to no-frills because i think set-cpu makes things un-stable.

Related

[1.267GHz!!!] [Devs] Overclocking/undervolting patches (update 6/15)

I got an EVO myself and managed to overclock it to 1.267GHz. We could probably go even higher, but that requires more extensive changes. Here are the changed source files: http://dl.dropbox.com/u/36553/supersonic_oc-uv.tar.gz
It also includes an undervolt courtesy of pershoot (a whole 0.1V lower when idle, which should help battery drain a lot!). Here is a test update.zip: http://dl.dropbox.com/u/36553/supersonic_oc-uv_signed.zip (working WiFi). Make sure to do a nandroid backup first!
Sensors/camera do not currently work in this kernel because the source is not yet complete.
There is an overvolt on the highest frequencies. It should not cause any issues. Thanks to toastcfh for his source, Herver for creating the first booting overclocked kernel on the EVO, all the kernel devs in the N1 community, especially pershoot and kmobs, richardtrip from the Desire community, koush for anykernel updater, and all who helped to root the EVO. Enjoy!
Update 6/15: Fixed 950mV undervolt. Raised voltages from 1228800 above to improve stability. Source files updated and update.zip uploaded.
old said:
I posted these in an earlier thread, but I think I should bring this to everyone's attention. Here are some simple patches that will overclock the Evo up to 1.267GHz (though by any means it's not guaranteed to get that high!):
Edit: please don't flash the below update.zip, as it doesn't seem to boot. Devs, the patches are still below, and a zimage is in the anykernel update zip.
Update: I compiled it myself. Here is an update.zip: http://dl.dropbox.com/u/36553/update-oc_signed.zip. This uses toastcfh's sources, Koush's excellent anykernel updater and a config.gz pulled from a stock Supersonic. If this doesn't boot, no damage will be done to your phone. Just reboot into recovery and reinstall your ROM. You can test overclocking by grabbing SetCPU from my sig or changing the cpufreq values if you know how. Once we get this working, I will create an undervolted version for battery savings. I'd get an Evo, but it's sold out everywhere T_T
http://dl.dropbox.com/u/36553/supersonic_oc.zip
cpufreq.c and acpuclock-scorpion.c are in arch/arm/mach-msm, and supersonic_defconfig is just the config. I don't have an Evo, so I can't test these out, but these should work with the source files toastcfh posted earlier: http://forum.xda-developers.com/showthread.php?t=686240.
Undervolting can be achieved simply by adjusting the voltages (in mV) in the acpu_freq_tbl table in acpuclock-scorpoion.c. For those not familiar with his work, you can see pershoot's safe (but lower) voltages for the N1 here: http://github.com/pershoot/nexus-kernel/blob/master/acpuclock-scorpion.c. If you want to overvolt or go under 1000mV, you have to make one further adjustment to the voltage regulator in board-supersonic.c.
Note that the N1 and the Evo are completely different devices (with similar processors), so what may work for the N1 may not work for the Evo.
Click to expand...
Click to collapse
Awesome... until I am sure this is stable, I will wait, but I must have overclock
jigglywiggly said:
Awesome... until I am sure this is stable, I will wait, but I must have overclock
Click to expand...
Click to collapse
I don't recommend overclocking, the devices already can run warm at current settings.
But then again, you are entitled to do as you wish.
Options better than overclocking are to remove the Sprint bloatware and strip down parts of Sense, this speeds things up alot by removing excess background applications.
Well it ain't too bad, my Droid at 1 ghz(550 stock) runs great.
So this should be good too.
I like overclocking as much as the next geek, but on the Evo... WHY?
This phone has yet to respond anything slower than instantly to my input and I expect a difference of .26 ghz would not make it so it could read my thoughts.
Undervolting, on the other hand, could help with the abysmal battery life...
phinnaeus said:
I like overclocking as much as the next geek, but on the Evo... WHY?
This phone has yet to respond anything slower than instantly to my input and I expect a difference of .26 ghz would not make it so it could read my thoughts.
Undervolting, on the other hand, could help with the abysmal battery life...
Click to expand...
Click to collapse
Some people love to run benchmarks. Try to improve on them over and over. Others like the feeling of just going faster. Also some apps or some in the future might require a faster running phone. What better way to achieve that (other then buying a new phone) then OC.
Also in the future, are you not gunna buy a 1.5ghz processor phone running 2.1 because a 1ghz processor can already do it? OC has many benefits, just not to everyone, most because they dont understand the consequences or benefits.
My htc hero clocked to 768mhz can run 2.1 and everything near instant. Still doesnt keep be from wanting a 1ghz or higher.
Also one more thing, 2.2 will be out soon. With full flash support, i have a feeling its going to require a lot of CPU. An OC Evo would probably run many things from 2.2 a lot easier.
Well, I agree with the benchmarking comments but on the subject of Froyo... Froyo is designed to be even faster on equivalent hardware than 2.1... and 2.1 on my Evo is smooth as silk. And the Evo handles most Flash I can throw at it, so I'm not sure. I have however noticed a small performance difference with live wallpaper running, so maybe OCing will clear that up a bit.
Jus10o said:
Some people love to run benchmarks. Try to improve on them over and over. Others like the feeling of just going faster. Also some apps or some in the future might require a faster running phone. What better way to achieve that (other then buying a new phone) then OC.
Also in the future, are you not gunna buy a 1.5ghz processor phone running 2.1 because a 1ghz processor can already do it? OC has many benefits, just not to everyone, most because they dont understand the consequences or benefits.
My htc hero clocked to 768mhz can run 2.1 and everything near instant. Still doesnt keep be from wanting a 1ghz or higher.
Also one more thing, 2.2 will be out soon. With full flash support, i have a feeling its going to require a lot of CPU. An OC Evo would probably run many things from 2.2 a lot easier.
Click to expand...
Click to collapse
You know, this is an excellent point and I feel like I failed the developer community in some small way when you had to bring it up. You shouldn't have to provide a reason for wanting progress, it should happen for its own sake.
Proceed.
Jus10o said:
Some people love to run benchmarks. Try to improve on them over and over. Others like the feeling of just going faster. Also some apps or some in the future might require a faster running phone. What better way to achieve that (other then buying a new phone) then OC.
Also in the future, are you not gunna buy a 1.5ghz processor phone running 2.1 because a 1ghz processor can already do it? OC has many benefits, just not to everyone, most because they dont understand the consequences or benefits.
My htc hero clocked to 768mhz can run 2.1 and everything near instant. Still doesnt keep be from wanting a 1ghz or higher.
Also one more thing, 2.2 will be out soon. With full flash support, i have a feeling its going to require a lot of CPU. An OC Evo would probably run many things from 2.2 a lot easier.
Click to expand...
Click to collapse
Agree with everything you just said, and I am less than excited about the benchmarks with the EVO thus far
Roman G said:
Agree with everything you just said, and I am less than excited about the benchmarks with the EVO thus far
Click to expand...
Click to collapse
HAHAHA.. im sorry but i had to laugh at your sig.
Jus10o said:
HAHAHA.. im sorry but i had to laugh at your sig.
Click to expand...
Click to collapse
Ya I sold my hero a couple weeks before the EVO dropped, and had to use my wife's old phone.
phinnaeus said:
I like overclocking as much as the next geek, but on the Evo... WHY?
This phone has yet to respond anything slower than instantly to my input and I expect a difference of .26 ghz would not make it so it could read my thoughts.
Undervolting, on the other hand, could help with the abysmal battery life...
Click to expand...
Click to collapse
I'm not trying to start an argument at all but you have to think broader mathematically. If the processor runs at 1000Mhz or 999mhz (In the case of my N1) a .267 increase is 267mhz, a 26.7% increase in computational performance... That's pretty raw especially in cellphone terms, that have no way to vent or displace that kind of heat.
Has anyone noticed how much hotter the kickstand gets? I bet you that it's attached to something the cpu is connected to. $5 bucks says we will see KICKSTAND HEATSINK + FAN MOD 2GHZ OC! LOL
thebluecoat said:
I'm not trying to start an argument at all but you have to think broader mathematically. If the processor runs at 1000Mhz or 999mhz (In the case of my N1) a .267 increase is 267mhz, a 26.7% increase in computational performance... That's pretty raw especially in cellphone terms, that have no way to vent or displace that kind of heat.
Has anyone noticed how much hotter the kickstand gets? I bet you that it's attached to something the cpu is connected to. $5 bucks says we will see KICKSTAND HEATSINK + FAN MOD 2GHZ OC! LOL
Click to expand...
Click to collapse
This is a patch for developers, not a discussion thread for the merits (or lack thereof) of overclocking.
If you don't want to overclock your phone, nobody is making you.
It has worked out fine in the Desire and Nexus One community.
coolbho3000 said:
This is a patch for developers, not a discussion thread for the merits (or lack thereof) of overclocking.
If you don't want to overclock your phone, nobody is making you.
It has worked out fine in the Desire and Nexus One community.
Click to expand...
Click to collapse
how do i apply this ???????
can u make it flashable?
mccurt29 said:
how do i apply this ???????
can u make it flashable?
Click to expand...
Click to collapse
need to follow the directions in the first post. the .c files need to be loaded into the kernel source (right now just have toast's soruce) and the kernel has to be compiled with them.
if somebody wants to compile up a kernel with these, we could start testing. if i get some free time i'll help out here and compile a kernel but somebody else will prob beat me to it!
please someone let us know how this works out for your evo 4g... benchmark, test results... anything to show better/worse performance, whether your got ALOT warmer, or just a lil, etc.. ne information would be greatly appreciated it, i'm not a 100% noob, i just know how to follow instructions very well, doesn't mean i understand everything that's going on, just the basic concept of what i want. thank you in advance.
madunix said:
please someone let us know how this works out for your evo 4g... benchmark, test results... anything to show better/worse performance, whether your got ALOT warmer, or just a lil, etc.. ne information would be greatly appreciated it, i'm not a 100% noob, i just know how to follow instructions very well, doesn't mean i understand everything that's going on, just the basic concept of what i want. thank you in advance.
Click to expand...
Click to collapse
I'm waiting for someone to compile this first.
If nobody steps forward, I'll make my own attempt, but I'll be working blind with no test hardware.
I'm pretty sure most devs are waiting on the htc source kernal before playing with this. I can't wait but I understand them being hesitant to do too much with this for now. Still awesome of you to post it and have it rdy for when that time comes!
sounds good.
madunix said:
sounds good.
Click to expand...
Click to collapse
Your signature says you have a radio of 1.32.651.6, just to let you know that is not a radio, that is an HTC software OTA update. My radio is 1.39.00.05.31 for example

[Q] Overclocking

Has anyone tried to mess around with the overclocking or is this not possible with stock?
ShotgunSam said:
Has anyone tried to mess around with the overclocking or is this not possible with stock?
Click to expand...
Click to collapse
you can probably use tegrak overclock in the market to do so on the stock kernel...it injects a kernel module to allow for overclocking
but really you would want a custom overclocked kernel in an ideal world
also overclock is meh
no point. we havent even been too successful in flashing stock kernel. not many infuse buyers have a two infuses or bought it for dev purposes. the testing on things has been slow.
gingerbread will be better than overclocking. now overclocking gingerbread will be awesome for benchmarks but noone will feel the need to do it once they see how smooth it can run.

[Q] Overclocking

Does anyone know of some good apps (preferably free) that I can use to overclock a rooted droid charge, with the latest altered beast ROM and kernel?
There aren't any overclock kernels at this point. Its being worked on. Just be patient.
Fe_Man said:
Does anyone know of some good apps (preferably free) that I can use to overclock a rooted droid charge, with the latest altered beast ROM and kernel?
Click to expand...
Click to collapse
You can try tegrak from the market if you really want oc.
In all honesty, just wait for a kernel to come out that will actually oc. I'd love a kernel that uses voltage control and will wait for that...
Ahh, thanks. This is my first android device so I have no idea what to expect and when
If I can ever get my config straightened out, I was going to look into doing an OC kernel that uses Voltage Control, similar to nemesis2all's kernels for the Fascinate. Still trying to get a working config though.
My opinion though is that OCing the hummingbird processor is useless, and does little for performance on a day-to-day basis and only serves to give you big numbers in benchmarks while reducing battery life.
I mostly used the 1120 step skipping 1000 and scoring serious uv was awesome

Overclocking .apk

Will an overclocking .apk be made for the O3D?
Is this possible rather than the current method which is being used in the custom ROM's?
I'm a noob so please bare with me.
with overclocking you would use setcpu or something similar to set the frequency. right now oc for this phone is still in a very early stage which is why we only have the top speed. once we get everything worked out you will be able to set multiple oc speeds in setcpu. i am working on trying to make 1008 available in setcpu so that you can then select from 300, 600, 800, 1008, 1188(or whatever you are oc'ed at) it will all come in due time for now all we can change is the top speed
...fighting ninjas at night, talkin' about this and that.
Cool. Just a case of waiting then.
Thanks for the reply.

Stable undervolt settings?

This question doesn't seem to have been asked in a while so hopefully there is a little more info now, can anyone give me some suggested undervolt settings? I know every tablet is different but this will at least give me a place to start.
Anyone have any advice?
Use Blades' kernel. Its automatically undervolted pretty significantly, but seems to be stable on ALMOST every Transformer.

Categories

Resources