Related
Hi,
I am using my HTC Touch Pro with an Opel Vectra built-in bluetooth carkit.
All functions, like browsing the address book and call registers, are working fine. However, at random times, my carkit reports no phone. When I then check my Touch Pro's bluetooth status, I see that it is has been disabled.
After manually re-enabling it, I can pair with my carkit for as long as it takes for bluetooth to turn itselves off again.
I've already tested with JETware, but that does not change anything. Also tried the universal broadcom bluetooth stack, but doesn't seem to work on the Touch Pro. HTC only comes with a standard answer that they don't support all carkits and headsets... Since the BT stack on the phone seems to crash, I don't think it's a carkit issue.
Anyone here with the same issue? And maybe a solution?
Thanks and regards!!
Start -> Settings -> Connections -> Bluetooth -> Timeout (tab). Turn off Visible mode set to "Never".
I think this must be your problem.
Hi Freco,
Thanks for your reply! This option is set. However it's not really the visibility that turns to invisible, but the whole bluetooth stack is being turned off completely. Need to fully re-enable it via Comm Manager.
Any other options? Does anyone know if there is a working broadcomm stack for the Touch Pro?
Regards!
Hi,
I have exactly the same problem with a Vauxhall kit, I have tried all sorts of things, but nothing seems to work
try:
start -> settings -> connections -> bluetooth
timeout tab
select 'never' from drop down box
Hi Brendo,
Unfortunately this doesn't solve the issue. Once paired, the connection even works without being visible. It's also not a fixed period of time before the disconnect takes place (can be within a minute, sometimes after half an hour). However, the whole bluetooth icons disappears from the top icon bar and comm manager shows it's turned off completely.
Hope somebody has any other ideas, because the only thing HTC can do is point to the carkit vendor :-(. Since all functionality is there when connected and the phone is turning off BT in some way, I really don't think this is caused by the carkit vendor. I should at least expect BT to stay enabled on the phone.
Thanks!
Yes, same here, BTW I have tried this in my Friends Saab, and the same problem.
same problem here with a Opel DVD90 buildin bluetooth carkit.
With other htc phones it always worked like a charm, but my mda vario IV continuously disconnects after a random time period and shuts down the complete stack.
Try this!
I have the same problem with my opel with original bluetooth-kit (2007). On the touch pro I changed the band and network from auto to GSM, as G3 reseption in this area is quit poor, especialy while driving. It helped for me, at least the last few days. I agree this has been an annoying problem.
I have tried to switch to "GSM only mode" in the past, but as far as I remember it does not completely solve the issue. However, I will give it another shot! Actually I can't figure out at what point it occurs... It can happen within a minute or after half an hour without using any funtion.
Does one of you know if there is a way to do some debugging on the Bluetooth stack?
And has anyone experience with other Windows Mobile 6.1 based phones in this combination (just curious if it's a WM issue or HTC only)?
Furthermore I did some tests with JetWare. You should be able to limit the number of synchronised items then (might be related to this issue). However, it looks like this configured limit is being totally ignored: when I limit my recent call list to 5 with JetWare, it still syncs about 25 items. Anyone tested with Jetware?
I have tried the GSM only mode, this didn't help either
I have now given up and got myself a Nokia E66, which works perfectly.
All contacts are pushed to car, no disconnects and AD2P works so my mp3 ringtones play through the car speakers! Sweet
Word of note, I had issues with N-Series phones, would connect ok, but contacts would not push.
I have the samen problem with my HTC Touch Pro and Saab.
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
ExTREmE99 said:
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
Click to expand...
Click to collapse
I am having the same problems you describe. Anyone got an suggestions???
I encountered the same problem; first with an opel udp carkit and next with the bluetooth interface software from homeseer.
It has something to do with phone signal loss.
With the opel carkit I noticed bluetooth automatically turns off when the phonesignal switched from 3g to gsm.
I also noticed that in my home, BT turns off whenever I have been in a room with no phone-signal reception.
try this thread, both registry change and attached cab file, reset. DOn't worry if the make visible to all option is unchecked.
http://forum.xda-developers.com/archive/index.php/t-314996.html
Is anyone able to automatically connect to a bluetooth device from your captivate? I am using a sony bluetooth receiver a2dp profile so it's basically functioning like a bluetooth headset.
Pairing works. Manually connecting works. But it would be great if the captivate automatically connected to the bluetooth receiver as soon as i turn on bluetooth. It takes almost five clicks to manually connect but only one to turn on bluetooth.
Sent from my SAMSUNG-SGH-I897 using XDA App
I have a similar problem in that the phone will sometimes "forget" the bluetooth devices that it has been paired with. I then have to do the pairing all over again.
I'm having the same problem - if I turn the phone off & back on again, it won't connect to my car. The bluetooth menu still shows that it's paired, but it won't connect (even if I try to manually connect). The only way to get it to connect again is to turn bluetooth off & back on - then it connects automatically.
Mine connects right away.
I think it is relate to not being able to set the bluetooth to always visable. My fuze had the same problem untill I put the energy rom on it.
I'm having the same trouble. I have to click on the Connect option which is buried in the Bluetooth menu. Annoying.
Are you using a task manager or some sort of helper to keep battery usage low? I found I was having a blue tooth problem until I saw a OPP service pop up on my task manager. Every time I killed apps I had blue tooth problems until I set this service to be ignored and left alone. Now even after I shut off the phone and turn it back on, I quickly connect to my blue tooth headset.
I'm just a noob here and I am thankful to everyone who posts who have helped me so i thought I's throw this out as something to check on.
So I am running Vegan 5.1(Which I love), and I just got a new Bluetooth headset which I tried to connect to my tablet so i can play music to my headset during class, however to connect you need to set up with a "0000" pin, which my tablet never asks for. It just says "paired, not connected" and will never connect cause it cant without sending the security pin, is there a way to enable this in vegan 5.1?
Well it depends on the bluetooth you bought because some don't need the pairing code if your in pairing mode hopefully it is A2DP compatible because that's the only way to get music to the headset
My motorola s9 headset said paired but not connected then I long pressed it and I got some other options including connect. The next time it paired automatically but my tab is crashing (and it did) so the very next time after that I had to actually type the pair key 0000 after the long press.
I need to wipe and reinstall everything but I am just waiting till it is totally unusable.
gunsjoe said:
My motorola s9 headset said paired but not connected then I long pressed it and I got some other options including connect. The next time it paired automatically but my tab is crashing (and it did) so the very next time after that I had to actually type the pair key 0000 after the long press.
I need to wipe and reinstall everything but I am just waiting till it is totally unusable.
Click to expand...
Click to collapse
I've done long press and i only have 3 options: Connect, Unpair, Options. Options just has Connect and use device for audio options, but neither let teh device connect nor give the option to enter the pin. Any ideas?
I am running vegan mod, so when you click connect it doesn't? That seems odd... removed dumb question.
I realize this thread is a couple of weeks old but I am having a similar problem and wondered if you ever figured it out.
I am able to connect to my headset and use it to listen. However I have a Creative D100 bluetooth speaker that won't work. It will connect but as soon as I close settings and then start playing music or videos it drops the connection.
JoeMofknDot said:
Well it depends on the bluetooth you bought because some don't need the pairing code if your in pairing mode hopefully it is A2DP compatible because that's the only way to get music to the headset
Click to expand...
Click to collapse
or you can use supermono pro
it sends any sound through bluetooth.
i use it for my music and pandora on my phone.
unfortunely my headset wont connect either. what i did to get it to connect is this:
make discoverable
unpair
long press on device and press connect and pair
i can get the pin this way but mine still wont connect. just paired ;(
It is an A2DP speaker. Works great with my Iphone but would love to be able to use it with my gtab for watching Netflix and Hulu through Playon.
It connects fine the connection indicator on the speaker even comes on but as soon as I try to play any type of media the connection drops.
Figured it out. It works fine if I am connected via wifi. If I'm tethered to my phones ad hoc network The bluetooth speaker drops the connection. Guess bluetooth doesn't like ad hoc networks
Hi ppl,
I'm having issues with bluetooth on mytouch4g phone.
To connect it to hands free set I have to every time turn off and then turn on bluetooth on my phone.
Anyone have similar issue?
Is there a setting somewhere to set default device?
Thanks
Do you mean "Hands free mode" or do you mean pairing a stereo BT headset?
With the stock OS -- "Hands free mode" can be set by either 1) starting the Car Dock application, or 2) Using the BT headset phone button or the Genius button to enable speech commands, and saying "Hands Free On" once the phone is ready.
With the stock OS -- pairing of the phone occurs automatically whether the phone or headset is powered up first. Pairing of media (for stereo headsets) will only occur automatically with any degree of regularity -- from experimentation and observation by others, reported on forums like this -- if the phone's BT is powered up =after= the headset. One can manually disable and enable media connectivity after long pressing on the device in the BT settings window, and that will establish the media connection -- but it is probably easier to have a BT power toggle on your home page somewhere.
If neither of these answers the question you were asking, please rephrase it. And of course, for a custom ROM (non-stock OS), ask in the appropriate ROM's thread in the development subforum.
I mean bluetooth at car. I'm able to pair my phone with car and connect with no issues.
If I get into the car with my phone and bt on - it will not establish connection. I have to turn off bt on the phone and turn it back on. Then it will establish connection. It works fine with my old Fuze.
alex_gim said:
I mean bluetooth at car. I'm able to pair my phone with car and connect with no issues.
If I get into the car with my phone and bt on - it will not establish connection. I have to turn off bt on the phone and turn it back on. Then it will establish connection. It works fine with my old Fuze.
Click to expand...
Click to collapse
i have the same exact problem except i can't use any of the bt features on my car.
2010 infinit G37
any help would be greatly appreciated
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
nickelnine said:
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
Click to expand...
Click to collapse
I am having the same issue with 9.0.2 OOS. So not sure if this us a compatibility issue with more than 1-2 years old vehicles or something else? Glad to hear that OB7 is working fine for you. Hope fix is coming soon. It's simply annoying.
I am having car connection issues as well. I have a 2010 Ford Edge. Just moved from Sony Xperia XA1 Ultra on Orea to my first OP device - OP6 Pie 9.0.2 - I can connect to my car initially but once I turn off my car, I have to go through a series of reconnect steps. I called tech support and we spent about 45 min troubleshooting - of course I was told I was the only one who had complained of this issue - anyway no resolution. The only way I can "reconnect" is to go into my car's system settings and select "connect to BT device" then toggle bluetooth off and on in the phone - sometimes this works with the first go, other times I have to repeat this cycle 5 or 6 times. Simply selecting "previously paired devices" in the phone app doesn't work either.
Really a pain in the tush, because I am usually in a hurry and don't have time to go through all this scenario to get a connection.
On the other hand, I have a bluetooth ear piece (made by Samsung that is like 5 or 6 years old) that reconnects every time I turn it on, no problems.
Car connections too but was not present in omni
I found for stock, performing a network reset (mobile, wifi Bluetooth) then restarting the device fixed the Bluetooth connection issue.
For custom non-stock ROMs, for my issue at least, I found its not a Bluetooth issue at all but rather the mobile network drops and the car Bluetooth cannot reconnect. The same network reset as above does not work but what does work is toggle off the "automatically select network" and manually select the mobile network from the menu that pops up. This keeps the mobile network intact (until the next device reboot, at which point repeat the steps) with the car and all is good.
I only figured it out by accident; hope this helps others.