anyone get this working ? or is our gtab capable?
This is exactly what I need too.
Motor Droid 1 and a Gtab...Btooth DUNning hand in hand...paradise!
not sure if it will work on the gtab but i know that i used to do it on my droid and my motorola q with my laptop using pdanet since pdanet has a bluetooth dun feature.
dragonfly1113 said:
not sure if it will work on the gtab but i know that i used to do it on my droid and my motorola q with my laptop using pdanet since pdanet has a bluetooth dun feature.
Click to expand...
Click to collapse
The issue is that the PDAnet software is using the telephone as the modem and desktop software on the PC (client software) to connect to the telephone as a modem. We would want to use the Gtab as the desktop with client software to connect to either a telephone as a modem or even to a PC and use the PC's network connection. That doesn't exist today AFAIK except perhaps for the Archos tablet (and again not sure that is working well for them). I am sure with newer tablets coming, some software will soon emerge with a client function that will allow you to connect the Gtab to your Android telephone or Blackberry or even iPhone. There isn't a way today (AFAIK) to use your PC desktop's network connection with the GTab with a USB link (again the software I have been able to find assumes you want to use the desktop connected to the telephone's network connection and not the other way around).
Once this is available it will be sweet (especially if I can connect to my Blackberry; wired or wireless).
I know that the CM 6.1 supports the USB Keyboard/mouse, but what are the odds of getting the Bluetooth DUN tethering support ported over from the Archos 101 and 70 devices? Would love to hear some insight from the devs about the feasibility of having such a feature. I would love to leave my EVO tethered to the GTab over Bluetooth instead of Wifi. It would be a huge battery saver when I'm away from home/office wifi connection.
Also, USB Keyboard/mouse as a part of TnT? Possible? Worth it? Not worth it?
I second the above. BT stays on 24/7 on my phone, it would be much easier, and ideally we could eventually come up with some sort of on-demand script or app that keeps the BT DUN profile active, without battery drain on the cell.
With this in place, the gTab could connect and disconnect to the cell phone as needed, just like DUN should be. Best case scenario is to not even have to do anything on the phone, just enable BT on the gTab (or leave enabled as desired) and do some activity that accesses the internet. This would trigger a BT DUN connection to the phone, which disconnects after a certain period of inactivity (or manually, as desired).
If I knew a damn thing about how to program, this is what I would be trying to create.
That said, I'm a willing guinea pig.
Really? No one else is interested in this?
I know one of you guys out there has a rooted phone with wireless tether. I'm just starting down the root road. I have a Dinc, but it's been factory since I got it... and will be until the weekend, the gTab has whetted my whistle for root freedom.
What happens when you try to pair your gTab with your phone while it's got BT Tether activated? Any BT DUN profile goodness?
P_6 said:
What happens when you try to pair your gTab with your phone while it's got BT Tether activated? Any BT DUN profile goodness?
Click to expand...
Click to collapse
I'll try it out and let you know.
Bluetooth Tethering a High Wish List Item
For me, getting the tablet to tether via bluetooth to my Blackberry Tour would be a high priority wish list item. I am completely in the dark with this stuff but I can tether my PC to my Blackberry so I should in theory be able to tether and use the network connection. I realize that most folks here probably have an Android-base smartphone, but my company makes me carry around their smartphone (and has the decency to pay for unlimited data plan). If I could get the tablet to work from the BB's network connection I would be almost complete on my wish list. I have gotten to the point of paring the two devices (but can't seem to get them to connect). I am using tnt lite 2.02 and my 9630 device has v 4.7.1.40 with 3G, CDMA connections.
Indeed, the hope would be that the BT stack within the gTab can take advantage of BT Dial up networking or Personal area networking profiles. Then we would be good to go. If not now, hopefully we can find a way to get that to work.
Really? No one care about Bluetooth Tether on this device?
You don't have to ask me twice Oops, you did.
I am extremely interested in a Bluetooth tethering solution for the gtab. It's the only way I will be able to get a 3G connection from my phone that won't be policed at work (non-corporate wifi hotspots are monitored).
I have a Nexus One Adnroid phone (running Froyo 2.2.1). I use the Wifi hotspot feature when I want hop online with my G-Tab (my work monitors wifi, as well but I only turn it on as I need it.) I can't speak for BlackBerry phones but any "rooted" Android phone should be able to act as a 3G/4G hotspot.
Wifi tethering should be faster, but USB tethering and keyboard & mouse support are needed and should work in the first place. (keyboard and mouse support at least should).
Need a program like http://android.gval.biz/ or ibluever for iphone/itouch then the g tablet would be my laptop replacement for traveling .
nicholas621 said:
Need a program like http://android.gval.biz/ or ibluever for iphone/itouch then the g tablet would be my laptop replacement for traveling .
Click to expand...
Click to collapse
I've tried to run this on VEGAn ROM, configured but at the moment when It suppose to scan for Channels, it exits of message "Failed To connect to SDP server on device Blackberry 9000".... ideas?
nicholas621 said:
Need a program like http://android.gval.biz/ or ibluever for iphone/itouch then the g tablet would be my laptop replacement for traveling .
Click to expand...
Click to collapse
Are you looking for DUN over BT? If so, have you tried this:
http://www.appbrain.com/app/pdanet/com.pdanet
Jim
I believe PDAnet requires client windows/mac software, and they haven't written client Android software.
I haven't seen anyone port the Archos home-grown BT tether to any other brand. BT tether isn't part of Android (I'm betting the cellcos in OHA demanded it not be built).
My wife has Joikuspot on her phone, so she wifi tethers on the G-tab.
I have unlimited bluetooth data, so I bought an Archos.
ml_boston said:
I believe PDAnet requires client windows/mac software, and they haven't written client Android software.
Click to expand...
Click to collapse
You are right PDANet wont work as no client for Android, but from my experience listed above blackberry refusing connections.... or may be GTab just doesn't opening connection properly.
When I check GTable BT device property from Blackberry side it can do only:
Handsfree Audio Gateway
Headset Audio Gateway
Object Push
AV Remote Control Target
.... there is no DUN in the list, so I suspect it just not supported by BT stack on device.... but also I have in same my laptop listed as well which doesnt have DUN in its services
I need some help, as I'm kinda clueless with networking. I have an Ubuntu desktop connected to the same monitor my 360 is. I can connect to xbl a few different ways.
1. With the d-link wireless gaming adapter, set to adhoc mode, connected to my wifi tether.
2. USB/wifi tethering the desktop to my phone and sharing the internet connection with the Ethernet port where my Xbox is plugged in.
I've used, wifi tether for root users, barnacle (which supposedly allows port forwarding), built in USB and wifi tether (I'm on cm7 nightly with an HTC glacier)
I've managed to connect, but NAT is set to strict on all. Does anybody know how to change this? I don't know if there's a way to change this within the build.prop, or some other file?
Any help or advice would be much appreciated. I just have no other internet connection.
#AngelFace#
/b/rotherJudas said:
I need some help, as I'm kinda clueless with networking. I have an Ubuntu desktop connected to the same monitor my 360 is. I can connect to xbl a few different ways.
1. With the d-link wireless gaming adapter, set to adhoc mode, connected to my wifi tether.
2. USB/wifi tethering the desktop to my phone and sharing the internet connection with the Ethernet port where my Xbox is plugged in.
I've used, wifi tether for root users, barnacle (which supposedly allows port forwarding), built in USB and wifi tether (I'm on cm7 nightly with an HTC glacier)
I've managed to connect, but NAT is set to strict on all. Does anybody know how to change this? I don't know if there's a way to change this within the build.prop, or some other file?
Any help or advice would be much appreciated. I just have no other internet connection.
#AngelFace#
Click to expand...
Click to collapse
The lack of response really blows. I have the same exact issue and I cant fathom there not being a way around it . I'll keep looking and please let me know if you stumble upon something that works
The "nat type strict" we see on xbox live, from reading around allot deals with the bandwidth(speed) of your internet. If you use fast wifi, your nat type will be ok, but if someone goes on your wifi an use the internet, it's slower. The internet speeds we get from the cell towers is no where fast enough to change it.
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Before I had my Charge, I had an Imagio running WinMo 6.5. On that phone I ran an app called WiFi Router to share my Verizon Internet. The cool thing was that my phone cold also connect to my home Belkin router and as long as every other device was on the same network, they would all see the Internet via the Belkin (even the wired devices).
Now I have my Charge rooted and I am running Barnacle with no problems. But to share my Internet with all of my devices, I have to have a PC with a WiFi card and a Wired NIC then run ICS (Internet Connection Sharing)... yuck!
Is there any way I can share my Charge's Internet the same way I did on my Windows phone?
If there were a way to have the WiFi running at the same time as Barnacle, it might work as I need/want.
Can the Surface RT USB tether to smartphones? I have an older LG P990. When I tethered to my normal PC it had to first quickly install AndroidNET or whatever. That makes me think that it won't work on the RT.
I need to be able to tether, I could just go the route of a mobile hotspot, but I don't like the idea of every single Chinese person on the train trying to steal my wifi. They are pros at stealing wifi in this country.
I heard you can tether using bluetooth. Is that possible on the Surface RT?
Thanks,
lgnationrc
I tether to Surface from my Galaxy Nexus over bluetooth. It disconnects all the time without any reason but haven't been able to figure out why. With BT I can enable it on phone and it shouldn't eat battery like having wifi hotspot all the time active. I just open the BT PAN from Surface with 2 button presses and it opens in 1 sec. Only if the disconnect issue could be solved...
A few points, for the record:
1: Windows RT *probably* supports USB modems, which is how most wired tethering is done (the phone presents itself to the PC as a USB modem). I haven't tried, though.
2: Unless you use a crappy password - and really, why would you; it's not like you'll need to remember it at any time that you can't access it - WPA2-PSK is effectively unbreakable.
3: Don't be sure that Bluetooth is that much more secure. It is shorter range and lower power, though... but it's also lower bandwidth. A decent cellphone connection (3G, not even terribly good 3G) will saturate it.
Thanks, I will try it and see how it goes. Otherwise I will use Wifi, have no choice. Wifi gets stolen here all the time, even with that kind of setup.
Thank you