Database Info

Smart1 v2 Bug Collection

OMG, thats really bad news I red today! Smart1 will not release a v3! Your WM6 v2 is close to perfect, just some small bugs left to perfection. Whatever may happen, I wanna thank you for this first: GOOD WORK!!!
I may not have posted alot until now, since I prefer reading first, digging into it, then posting. I´m still pretty new to PPC world (compared to those who live in here..), and I don´t want to spam and pollute.
Now someone asked for list of bugs in smart1 WM6 v2 to fix them / cook a new ROM based on it, so I step in because these bugs are something I know about - sadly.
Maybe you smart1 could give all the files needed to build it to him, to make shure things dont get messed up on rebuilding? Don´t know how this is handled in here.
BUGLIST:
Bugs I have myself & they are confirmed:
- Backlight switches OFF after Softreset (really bad at night..)
- PIN to access device gets corrupted on Softresets (-> cant use device with PIN enabled edit: Installing radio ROM 2.61.29 has been reported to fix this bug, I will NOT test this.)
- Email Password gets lost after SoftReset (reenter on boot)
- IR not working (did not check manual reg fix avail.)
- WLAN in Comm Manager does not always switch ON/OFF propper, does not switch ON after several tries
- Delay of 0.5-1 sec on most Softkeys (1/2, Green, Red) + 1 & 2 cant be reasigned without problems (cab)
- second incoming calls screen never appear + no missed calls record in call history. (never tried, but as workaround I suggest disablin the feature at your cellular provider. edit: Installing radio ROM 2.61.29 has been reported to fix this bug, I will test this.)
- GRPS Connections do not intialize propper after Softreset. After opening Connection Settings once (like editing them, then OK) all works fine until next Softreset.
- Links inside emails produce an error
Bugs I dont have myself but confirmed
- Earphone speaker too loud eventhough already set to the lowest volume. Mic volume too soft as claimed by other party during conversation. (fine here, maybe depending on G3/4 or model)
- Incoming MMS does not work.Outgoing does work. (Cant confirm, hate $$$ MMS)
- the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer.
Bugs I have myself but not shure if confirmed:
- Could not get Internet Telephonie (SIP) working, may be wrong settings
- Sometimes dialing a contact does not work (from some views/windows). Will check the circumstances
Bugs some people have but not confirmed so far:
- MobileCalculator.exe not starting (works fine here)
- Pocket Outlook (Messages) does not start after a while (had this once, guess its some inteference with other soft)
- If you want to mark a task as complete or make a new task, you receive an error "not enough memory to complete the task, etc". If you click on complete (left button below screen), it marks the task as complete, but when you leave the application the task is not gone. When you enter tasks again, the task is still there.This happens too in the pdamobiz v1.00 rom. (I can not confirm this at all.)
- the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer. (not completly wrong, in general sofkeys lag)
- System sounds (click, msgbox etc) go off sometimes, a soft reset gets them back (had once, someone else confim please)
from 18.04.07:
- Display is not kept opp when pressing the power-button slightly once. Some program forces it to turn on back-light, which makes the touch-screen active again. Active touch-screen in a pocket is a very bad combination (I dont get this. Get opp?? Why not just lock device or use Mortsaver)
- The phone turns itself on frequently throughout the day when you have an Exchange email account. This is confirmed after a hard reset, and doesn't happen until the Exchange account is entered. (Guess Mortsaver could be used as workaround as long as not fixed.)
- BUG: The text or font cannot be changed in Outlook Mobile. Attempting to change the size of the text to bigger or smaller does nothing. (Uhm, does WM 6 support HTML mails at all? I don´t need it, if i need formated text i attach it)
- Ringing disappear from time to time (not sms). Screen still go on from time to time when display off(even on a clean hardreset).
(BTW; Since i have SmartV2, the extended rom does not install automatically.
I Confirm these bugs:
----------------------------------------------------------------
To get a clean & bugfree WM6 on prophet (maybe) I suggest following system:
- Everybody reads the whole tread before he / she starts posting
- Everybody thinks twice before posting if the post matches the topic
(Smart1 v2 Bug Collection - not: How to flash ROM or Please add finnish language.)
- Everybody posts bugs that are not already known .
- Everybody confirms bugs if they where not confirmed once
- Everybody falsifies bugs if they do not appear on their device
- Everybody posts tested solutions to confirmed bugs
- Nobody posts requests or problems with flashing or any other BS
- Nobody quotes complete posts just to add a single line
I will read this tread and update this post to collect all known bugs into this single post. I hope some mods keep an eye on this tread and keep it clean from "I have a problem and I am to lazy to read - PLEEEASE HELP ASAP" posts. Excuse me if this sounds a bit rude, but I just red trough 90 pages of the smart1 tread....
Even if we can`t cook ourselfs we can still judge the taste...
Please keep this post clean!!!

A
bug I find: afetr using some time, the messeage can't be used!
thanks

Problems happened to my prophet
1. Earphone speaker too loud eventhough already set to the lowest volume. Mic volume too soft as claimed by other party during conversation.
2. second incoming calls screen never appear + no missed calls record in call history.

Bug with tasks?
I have only one complaint and this is about tasks.
If I want to mark a task as complete or make a new task, I receive an error "not enough memory to complete the task, etc". If you click on complete (left button below screen), it marks the task as complete, but when you leave the application the task is not gone. When you enter tasks again, the task is still there.This happens too in the pdamobiz v1.00 rom.

I don't know if this could help others.. I had the same problems as you other guys in this thread with the phone part. (No missed calls list, PIN to access device gets corrupted on Softresets).
If i then flashed firts to NVID of WM5 rom, then to Smart1's WM6 V2 and after that i flashed to the radio rom of version 2.61.29.. Then those problems dissapeared for me.. I have a full call history list, and the phone does ask me for PIN everytime i soft reset! I haven't had these problems at all after i did this.
Bugs I have myself but not shure if confirmed:
- GRPS Connections do not intialize propper after Softreset. After opening Connection Settings once (like editing them, then OK) all works fine until next Softreset.
Click to expand...
Click to collapse
I can confirm that! I have the same problem!

Grt Rom, just a few glitches.
1) the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer.
2) System sounds (click, msgbox etc) go off sometimes, a soft reset gets them back
Can live with the above 2 problems, other than that i think its a fabulous rom, quite slick and quick. Hope someone can pick up where Smart1 left off.

Turns itself on with an Exchange email account
OK. Scratch the title of this post.
The problem exists when a PIN is used with the 'Lock' applet in Settings -> Personal -> Lock. When you have a PIN set to be required at startup, the phone will at times turn on by itself. Also, if you let the phone sit by itself for a few minutes, you will be able to turn it on with the 'end call' button! I have repeated this after several hard resets with no apps installed.
I originally thought an Exchange account created this problem because my hosted Exchange provider requires a PIN to be setup for the phone to communicate with the Exchange server. But, I know the Exchange account has nothing to do with the problem.

BUGS
BUGS
RINGING
Sometimes the phone does not ring as normal (sms do notify!), it displays only on screen without making any sound, not even vibration.
Happened once after weeks of usage:
SYNCRONIZING
Syncing with laptop not successfull. After all my calendar, contacts, to-do and task were deleted on unit. After that ActiveSync does not want to syncronize with phone anymore. Not even after deleting and creating a new partnership. The unit keep changing its ID; WM_Administrator1, 4, 6 etc.
Hardreset and reinstall of AS4.5 so far works.
GENERAL
*Display is not kept off when pressing the power-button slightly once. Some program forces it to turn on back-light, which makes the touch-screen active again. Active touch-screen in a pocket is a very bad combination. I dont use any exchange-account.
*Fast battery draining (tried every radio-rom, now running 2.07.20)

More bugs
And ofcourse;
Incoming MMS does not work. (outgoing does work!)

bongachalla said:
BUGS
GENERAL
*Display is not kept opp when pressing the power-button slightly once. Some program forces it to turn on back-light, which makes the touch-screen active again. Active touch-screen in a pocket is a very bad combination
Click to expand...
Click to collapse
For me, this is the biggest drawback. Which apps do have installed, and have you tested them to determine which app might be involved in turning the device on by itself?
I have also noticed that I can even get the device to turn on with the end call button at times...
Do you have an Exchange email account?

EDIT18th Apr-07 08:48 (GMT+1):
BUGS
Still no incoming MMS, Ringing disappear from time to time (not sms). Screen still go on from time to time when display off(even on a clean hardreset).
Have not been able to reproduce contacts/calendar deletion via sync yet (it appeared after some weeks last time, fresh install now only 3 days)
(BTW; Since i have SmartV2, the extended rom does not install automatically. I therefore have installed the cab-files in folder "\extended_rom\" manually via total commander. If that has something to do with it)
I Confirm these bugs:
Earphone speaker too loud eventhough already set to the lowest volume.
- the HW buttons (green and red) have a lag sometimes, or dont respond too well while using the dialer.

Wow, amazing how fast this gets confusing. People please try to keep it clean!!!
If you find out something is not caused by the ROM itself (like Bongachalla just did), please edit your previous posts and delete these Bug reports.
As far as I understand Bongachalla had 4 Bugs (no MMS receiving, No Ringing from time to time, Sync deleted all contacts on PPC and Touchscreen activating by programs (check our Mortsaver for this btw.)).
Did all of these bugs disappear after your reinstall or what?
Please try to be exact with your bug reports and check if they appear with a clean installed ROM before you post them. Please search on board if there is a fix for them and post solution together with report if you find some. If you get any error message google it to find out what causes it.
This helps us all and raises the chances that someone will take the time to build a rom with bugs fixed. Thx.

BUG: The text or font cannot be changed in Outlook Mobile. Attempting to change the size of the text to bigger or smaller does nothing.

No more bugs?
Maybe you did read the original Smart1 tread, so you know he revived his S200 and announced release of v3 in the next weeks. So I guess its time to post any unknown bugs and confirm the known ones, so they can be fixed in this (I guess final)release.
Thank you for your help.

Updated
(- Links in Emails produce an error)

Look here
http://forum.xda-developers.com/showthread.php?p=1200532&highlight=defbrowser#post1200532
Meierhans said:
Updated
(- Links in Emails produce an error)
Click to expand...
Click to collapse

Another bug not yeat reported
I've looked every where and didn't found anything related with this bug.
My sms just get erased from the Text Messages folder each time I do a soft reset.
using smart1_wm6_pp8mb_NEW.v2 and the Prophet_G3_G4_RadioRom_v2.61.21, followed the instructions and runned all the cabs in the extended_rom.
Did i do anything wrong or is this really a bug

No bug ... its a config of the SMS store!

I dont want to spamn this post, so can you just redirect me to the instructions on how to change that? so when i do a reboot, the sms dont get lost? sorry for the off topic([email protected])

You can't change it! If you reset with your stylus you will probably loose messages.
Use pxshut or similar or turn off (hold power for three seconds)
The reset hole is for emergencies only. This is discussed in great detail in the Fantastic 1.1 thread and the Smartv2 thread.
ex3cut3 said:
I dont want to spamn this post, so can you just redirect me to the instructions on how to change that? so when i do a reboot, the sms dont get lost? sorry for the off topic([email protected])
Click to expand...
Click to collapse

The HTC competition

Hi all there!
I would like to present U idea that starts in HTC competiotion about new (realistic) functions for smartphones.
NFC ID
First: What is NFC? - wiki helps here
Second: How to use it?
There are 2 popular ways to secure phone with Android on board:
Pattern and Password - both of them are uncomfortable, so most of of users don't use any of them, and I am sure no one likes them.
What if phone was able to recognize "the owner of hand" which hold it?
It could be reached by using NFC chip placed under the hand watch or bracelet or anything U wear on your wrist OR under the skin - more futuristic version .
After "lighting up"phone would scan for NFC chip then:
Will unlock if it finds it
Will do moves defined by user, for example:
stay locked
go to "public mode" - hiding personal data and other things defined by owner
start silent alarm - turn on tracking - send emails with position - without informing the person who hold the phone
...
The main thing is that all stay invisible for everybody around - NFC is so small that it could be hide and phone should not inform about identification process.
Also if it becomes more popular it could be defined "users" of phone - by the NFC identification - just like on PC, so your wife, girlfriend, boyfriend, kids could use your phone (or tablet)
If this idea sounds interesting for U, then please like and comment this YouTube vid and help it win
youtube.com/watch?feature=player_embedded&v=XsXJTLUlX94​

Every Action has an Equal and Opposite Reaction!
But it's quite nice though. It will make phones little bit more secure. But there is always the bug's in the software that makes our life harder.
Frankly i don't use such codes etc. Have bad expirience with them. There is always chance you put the right code or pattern and it still stays locked. Soon or later that scenario can occur.
And if i wanna hide something, definitely wouldn't let it float in phone like a duck in open season that's for sure

[TASKER] Some useful profiles made by me

I am sharing some profiles and projects which are very useful for me. The background is that I have installed tasker to minimize the apps for little things. I am not posting night profiles or profiles turning wifi off etc., so I think this thread will not be boring.
Here they are:
Project New Messages:
It has following profiles/tasks:
Show custom notification of new text
Open a Jellybean-like message reply popup upon clicking notification
If we decide to view message via default notification, clear the tasker's generated notification
Light up screen on receiving new text, if screen is locked.
The sceenshots are also attached for this project.
PROFILES:
Find phone, a "productive" GPS Locator solution.
When we send a text "findphone" to our number, following tasks are performed:
Set Wifi to off
Airplane mode on
GPS on
Get location via GPS (timeout 4 minutes)
Wait 4 minutes IF GPS location is not set yet
Airplane mode off
Wait 15 seconds (the time it takes for the network to be useable)
Send SMS to the number from which the findphone text had been sent (last incoming text number) (text will be: GPS [email protected] 00.000000, 00.00000)
Wait 15 seconds (to ensure the text has been sent)
Wifi on
Get Location via network (timeout 4 minutes)
Wait 4 minutes IF Network location is not set yet
Send sms again, now with the text like: Non-GPS [email protected] 00.000000, 00.00000
This turns wifi and mobile network off and turns gps on so the phone collects exact location data via satellites. after that, it turns the networks on and sends the exact gps location text. Then it also collects and sends the approximate gps data with the help of network, so the receiver will receive two texts. The format in which the texts are sent is made in such a way that if we copy the whole text of message and search in google maps's app, it will pinpoint to the exact location and not the nearest road.
Instant Missed Call Notify
Send text "Missed call from" followed by the number we had a missed call from, to a predefined number. (ignore the word instant)
Instant SMS forwarding
Forward all texts to a predefined number with text like "From [Name][Number]: [Text]
Send Email To Faraz
When composing an email, if we long press the search button, it will type in a part of email address, then press down then enter, hence selecting the first contact from the dropdown menu. Then it presses the down button like 4 times, then left then enter button (ALL ARE D-PAD FUNCTIONS), So, the send button is pressed. This is useful for facebook page admins and those who want to share every other picture via email to a contact.
And... Faraz is the name of page
About the image of browser, this is just a screenshot I wanted to share, just to send out a message that even a simple web browser-like "application" can also be made within two days of using tasker, so tasker is not too difficult and that the new users should give it a try

How come you make the screen go ON in #1

AnkitChanne said:
How come you make the screen go ON in #1
Click to expand...
Click to collapse
I did it with Secure settings plugin

Thank's man! I wish there was a specific thread for tasker where we could share profiles / scripts for tasker. It's a really underrated powerful tool that requires a bit of a learning curve, but once we get on with it, the possibilities are literally endless!

MidnightDevil said:
Thank's man! I wish there was a specific thread for tasker where we could share profiles / scripts for tasker. It's a really underrated powerful tool that requires a bit of a learning curve, but once we get on with it, the possibilities are literally endless!
Click to expand...
Click to collapse
Yes, there are many useful implementations, but I haven't found posts other than those who teach about turning wifi off in car or turning volume down at night.
I will hopefully post another, better than this, implementation soon. It's about adding widget-like functionality on the lockscreen of HTC.
See this preview, I am still building it.
The text at the bottom is email's subjects followed by the sender's names. Text looks broken here because this image was uploaded in intention of getting help with this exact matter.

usman farhat said:
Yes, there are many useful implementations, but I haven't found posts other than those who teach about turning wifi off in car or turning volume down at night.
I will hopefully post another, better than this, implementation soon. It's about adding widget-like functionality on the lockscreen of HTC.
See this preview, I am still building it.
The text at the bottom is email's subjects followed by the sender's names. Text looks broken here because this image was uploaded in intention of getting help with this exact matter.
Click to expand...
Click to collapse
There are some tutorials here on xda onder Android category. A brief search came up with extended results in how to use tasker. Some of them are quite good.
But yes, I agree that the app itself should have an official tutorial for the basic / medium stuff, the rest we would exploit and figure out on our own

[APP][3.0+] Gliderun *OPEN BETA*

Sports activity tracker
* ALPHA * state.
I'm looking forward for people to test and send suggestions.
Track your sports activities capturing
location
cadence
altitude
power
heart rate
speed
bearing
slope
etc...
Plot progress, lap time and other
Set targets and receive feedback while tracking your session
Works in landscape and portrait
Audio rithmic control.
Reproduce your music at modified tempo to match your cadence.
Enable metronome to help with cadence.
Download or import routes.
Routes export to GPX and KML
Google earth route export *Broken*
Check compass and GPS status
Integration of sensors and wearables
Heart rate and other BTLE sensors.
Miband
Ready to integrate more
Google fit integration
https://play.google.com/store/apps/details?id=com.tincore.and.gliderun
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

IMPORTANT NOTES
The app will only discover wearables like MiBand if they are not used at the same time by another app like MiFit. You need to close MiFit for the band to be discovered.
In the case of the MiBand when you change the app your band stored data will be wiped. I'm investigating a way to avoid this.

What does it do..?

First message updated a bit

How to connect with mi band? I search for devices but it find nothing
Edit: just figured it out
I have a question. After connected to my miband I tapped on the top left settings icon and I saw in the bottom of the list the option "factory reset". Is it really possible? What are the consequences? In the official app this option doesn't exist
Sent with my Nexus 5 through time and space

giorgis91 said:
How to connect with mi band? I search for devices but it find nothing
Edit: just figured it out
I have a question. After connected to my miband I tapped on the top left settings icon and I saw in the bottom of the list the option "factory reset". Is it really possible? What are the consequences? In the official app this option doesn't exist
Sent with my Nexus 5 through time and space
Click to expand...
Click to collapse
To connect the MiBand you unpaired it first from the other app havent you?
The Admin section of wearables exposes all kind of operations. Some of them are rather low level and even should be executed on a particular order. I may hide/show all that under a setting to avoid mistakes.
Factory reset just does that. It will wipe all the pairing data.

tincore said:
To connect the MiBand you unpaired it first from the other app havent you?
The Admin section of wearables exposes all kind of operations. Some of them are rather low level and even should be executed on a particular order. I may hide/show all that under a setting to avoid mistakes.
Factory reset just does that. It will wipe all the pairing data.
Click to expand...
Click to collapse
Thank you for answering quickly I ask that because lot of people on an Italian forum that I know had many problems with this wereable and I thought that a factory reset could solve them.
Another question: after using you're app I noticed that after reconnecting the mi band to its official app all the data was lost. Is it normal?
Sent with my Nexus 5 through time and space

giorgis91 said:
Thank you for answering quickly I ask that because lot of people on an Italian forum that I know had many problems with this wereable and I thought that a factory reset could solve them.
Another question: after using you're app I noticed that after reconnecting the mi band to its official app all the data was lost. Is it normal?
Sent with my Nexus 5 through time and space
Click to expand...
Click to collapse
About the data wipe. This is normal the app is setting new user data based on the personal profile.
Same with the alarms. The band, as far as I know, does not have a way to retrieve the current alarm configuration.

Thanks for the app. I think it very promising. I just installed the app from google play, unpaired the band with mi fit app and connected with gliderun. After connection, it stays short time as connected and disconnects after 4-5 seconds. Is there a reason you can tell? I use smartlock app and I am on cm11.
Thanks again.

saltinbas said:
Thanks for the app. I think it very promising. I just installed the app from google play, unpaired the band with mi fit app and connected with gliderun. After connection, it stays short time as connected and disconnects after 4-5 seconds. Is there a reason you can tell? I use smartlock app and I am on cm11.
Thanks again.
Click to expand...
Click to collapse
Sorry for not answering before. Is it working better now. There have been a good number of versions.

Hey, tincore. Thank you for making the app compatible with the Mi Band! Since there's a lack of feedback here for you, I'd like to leave you some general issues/thoughts/etc. If you'd like to inquire about any of my comments, or would like logs of anything, please let me know and I'll provide that. If you wouldn't mind just quoting some of my comment so I can get an e-mail notification of your reply, that'd be great!
I'm on Android 4.4.4.
- Initially, I had trouble pairing the Mi Band with the app. I unpaired my band from MiFit, killed MiFit, and attempted pairing to Gliderun. Initially, Gliderun would connect to the band, this is where band's lights light up, and you have to tap the band to 'accept' the pairing; but when you tapped the band nothing happened. However, a minute later the band connected to Gliderun as if I tapped it.
- When I connected to Gliderun, it recognized that I had 6,000 steps, but once I began walking, the app started counting from 0.
- I'm kind of confused about the 'start' function on the Activity tab. Am I supposed to have this enabled? Normally, I just go into MiFit, refresh the page for it to download the data from the band. Can I essentially do this with Gliderun without using this start function?
- On the Activity tab, is there a way to make 'empty' cells completely blank?
- Is there a way to track sleep?
Previously, I had trouble getting my MiBand to reliably stay connected with Gliderun, but now it seems to keep the connection fine. I'll start using this app daily instead and I'll check back here with any updates. Thanks again!

Thanks for the remarks!
After the band is paired once the app tries to find and reconnect to it automatically. I imagine that first time there was a problem with the connection so it connected on the retry . It *should* also syncronize itself every 1-2 hours..
About step count and the start button. Gliderun tries to combine activity and general tracking. When you start a particular activity (by clicking on start) it should count the steps of that activity. When you are not in a activity it should count those steps globally for a daily total.
To activate global tracking you can go to preferences > tracking or tap on some of the inactive dashboard indicators. Without global tracking activated you should still see some totals after syncronization with the band.
You have,at least, two steps counters the band and your phone. Each of them has an absolute step count.
"Sensor step counts" indicator shows the steps of the active step counter so depending on the band being connected or not it may toggle to your phone. I hope this makes sense.
I will add a "Blank" indicator asap.
About sleep. The app should be already tracking your sleep periods. You can see those on Global stats screen. I would like to add the deep sleep phases but I need documentation or advise on what exactly I have to look for in order to provide a faithful solution.
I'm trying now to fix a few issues to move to beta. I hope I can make a video and some captures soon.
adobrakic said:
Hey, tincore. Thank you for making the app compatible with the Mi Band! Since there's a lack of feedback here for you, I'd like to leave you some general issues/thoughts/etc. If you'd like to inquire about any of my comments, or would like logs of anything, please let me know and I'll provide that. If you wouldn't mind just quoting some of my comment so I can get an e-mail notification of your reply, that'd be great!
I'm on Android 4.4.4.
- Initially, I had trouble pairing the Mi Band with the app. I unpaired my band from MiFit, killed MiFit, and attempted pairing to Gliderun. Initially, Gliderun would connect to the band, this is where band's lights light up, and you have to tap the band to 'accept' the pairing; but when you tapped the band nothing happened. However, a minute later the band connected to Gliderun as if I tapped it.
- When I connected to Gliderun, it recognized that I had 6,000 steps, but once I began walking, the app started counting from 0.
- I'm kind of confused about the 'start' function on the Activity tab. Am I supposed to have this enabled? Normally, I just go into MiFit, refresh the page for it to download the data from the band. Can I essentially do this with Gliderun without using this start function?
- On the Activity tab, is there a way to make 'empty' cells completely blank?
- Is there a way to track sleep?
Previously, I had trouble getting my MiBand to reliably stay connected with Gliderun, but now it seems to keep the connection fine. I'll start using this app daily instead and I'll check back here with any updates. Thanks again!
Click to expand...
Click to collapse

tincore said:
Thanks for the remarks!
After the band is paired once the app tries to find and reconnect to it automatically. I imagine that first time there was a problem with the connection so it connected on the retry . It *should* also syncronize itself every 1-2 hours..
Click to expand...
Click to collapse
Yup! After wanting to view my current steps for today, I just opened up Gliderun, waited a bit, and it connected to my MiBand after a couple of minutes. I have to close Gliderun in the meantime because my phone is relatively old (HTC One S -- 2, 3 years?) so I can't have the app running all the time.
About step count and the start button. Gliderun tries to combine activity and general tracking. When you start a particular activity (by clicking on start) it should count the steps of that activity. When you are not in a activity it should count those steps globally for a daily total.
Click to expand...
Click to collapse
Ohh, I see, that makes a lot of sense! I'm a student for the majority of my day and don't really have any separate 'activities', so I didn't see the inherent benefit of activity mode, but that does make sense.
To activate global tracking you can go to preferences > tracking or tap on some of the inactive dashboard indicators. Without global tracking activated you should still see some totals after syncronization with the band.
Click to expand...
Click to collapse
Ahh, I apologize about that, I completely neglected this tab. I figured the Activity tab was more important simply because of its location. This actually looks more like how I was hoping the app would function.
About sleep. The app should be already tracking your sleep periods. You can see those on Global stats screen. I would like to add the deep sleep phases but I need documentation or advise on what exactly I have to look for in order to provide a faithful solution.
Click to expand...
Click to collapse
Thank you! Again, if there are any logs I can provide that would help, please let me know and I will certainly do so.
--edit--
I'm having an issue where the app doesn't seem to be updating the Global Stats tab. On the Activity tab, my total steps have been counted properly, but when I go to Global Stats, it only shows information from the previous time I synced (about 8 hours ago). I killed the app, re-connected, and re-synced, and the same thing happened.
--edit #2--
After messing around with the Global Stats tab, and switching views (24 hours/day/week), the app resynced on its own (not sure if it was a coincidence or from me switching views), and now the Global Stats tab has updated; but now it has slightly more steps than the Activity tab.
Not a big deal at all, but I figured you'd like to know!

I just found your app. It looks very promising.
Where would you prefer to have me send the feedback.
I understood there was also a Reddit thread somewhere - I could not find it.
Thanks

maishsk said:
I just found your app. It looks very promising.
Where would you prefer to have me send the feedback.
I understood there was also a Reddit thread somewhere - I could not find it.
Thanks
Click to expand...
Click to collapse
If you want you can send me an email. If it something more general or open to discussion by other people feel free to post it here.
That Reddit thread is not getting any rythm.

I had a Mi Band and used the MiFit app for the last couple months, but I lost the device. I've ordered a new one and I'm going to start using Gliderun mostly because of the Google Fit integration. While I'm waiting for my package I've been messing around with your app and trying to figure some things out so I'll be ready to go when my new band arrives. Here's some feedback:
The headphone icon opens up the music controls and the audio notifications; music controls/library only works with music stored on the phone, is there any way to integrate this with Google Music? There's only a couple of apps that I've seen do this (specifically GMusicFS), but it would be nice.
On the user screen: for any user input requiring a number (weight, height, goals, etc.) you have a scrolling number which is nice from a UI perspective, but when I have to enter any of these values for the first time, scrolling is very tedious. This is particularly brutal when I'm trying to set up a goal for the first time, I have to scroll all the way from 0 to 8,000. There should be a way to manually input a number using an on-screen keyboard as well. It also looks like the goal is limited to 20,000 steps, theoretically this should be unlimited.
User profile: I have my units set to imperial. When inputting my height for the major intervals you might want to make the height max out at 7-ft just in case. For the minor intervals, you should put the unit next to the number (inches) and I would limit the user to discrete numbers 1 through 12. I'm not sure how you're calculating height, but the way you have it set up it is very hard for a user to input their height in imperial units. For example: I am 6-ft 2-inches, in order to input my height I have to calculate how many hundredths of a foot 2-inches is. So in my case 2/12=.16666. The average person isn't going to do this and is going to give up when you can't just enter 6-ft 2-inches.
The compass UI needs a little work, it isn't quickly evident where north is. I would prefer a more traditional looking compass (maybe something similar to this). Also, for some reason my altitude is always blank.
Synchronize: I have the first three options enabled for Google Fit integration. The app always says disconnected, when I press the synchronize button it changes to connected, but I don't think anything is actually being synced. There should be some sort of progress bar when synchronizing with Google Fit so the user knows it's actually working. In my case I don't think it's working at all. I've enabled the option to download tracked activities from GFit, but nothing ever shows up in the stats.
In the settings, General: I would make an expert section to the settings menu that has to be manually activated and move Optimize track points and Recalculate calories there. Also for any option where you could be deleting or modifying data (everything under the "Other" section) I would have a confirmation dialog box pop up. That way if somebody accidentally presses one of those options they don't completely wipe out all there data.
In the settings, Audio: I would either explain the difference between Audio engine A and B or give the user an option to play example audio. Similar to how you have the option to "Listen to an example" of text-to-speech output in the main android settings.
In the settings, Notification: I think there needs to be a little more configuration for notifications. I really like the way the Notification version of the MiFit app allowed you to set the colors for the LEDs on the Mi Band as well as the number of times it vibrated and the number of times the LED blinked. I know this is a beta version, but I think a little more work needs to be done in this particular area if you want users to switch from the MiFit app. Being able to tell what app I'm getting a notification from just by looking at the band is extremely useful and it's going to make switching hard without it. I don't want to say you should copy the Notification settings screen from the MiFit app, but it has been implemented very well.
Settings: somewhere you need to provide Help information. For most of the options I'm not sure exactly what they're supposed to do, maybe have a ?-button next to the option that the user can press that will pop up a longer description of exactly what the option does.
Any thoughts on providing a dark theme as well? Just something simple where you change the background to black and the text to white, the green color should look good with both a dark and light background.
I saw you have sleep tracking on the list of things to improve upon, really looking forward to that. The MiFit app and Sleep as Android app provide a very clean UI for visualizing your sleep. I would try to implement something similar. I'm sure you've seen it, but this thread might have some hints on how to better pull the sleep data from the MiBand.
I know I wrote a lot, but you have done great work with this app in the short amount of time you've been developing it. I can't wait to see how this app progresses because I think you've got a really good app here. The design looks very good and polished it just needs a few tweaks here and there. Once I get my new Mi Band I'll provide some more feedback.
Keep up the great work. If you want to discuss any of this more I would be more than happy to do so.

Thanks for all that feedback! I add everything to my list. Will tackle the more important stuff first.
About audio.
I may eventually add a fallback into system players. The player provides a rythm guidance for your exercise by adjusting the playback rate to your desired cadence so it is rather specific. it is custom built.
About scrolling. If you tap you do not need to scroll. You can enter the number directly. This is NumberPicker standard. I may have missed one or two fields though.
I will increase the daily goals to something in the ultramarathon range.
About imperial input. You are absolutely right. Will change it soon..
I will see what I can do with the compass. It is all a matter of priorities.
Altitude comes from GPS.
GFit issue is a glitch too. Click sync again. I'm now focusing more on FitnessSyncer as it is much more powerful.
Sleep tracking is working. You can see it on Daily Stats. It may need some tweaking though. The band does not really export sleep data so I had to write the algorithms myself and I've already noticed a couple of issues.
Also the custom notifications is a great idea. I have to fit that into a general API. The app is meant to integrate other bands. Just need to get some samples.
Devo7v said:
I had a Mi Band and used the MiFit app for the last couple months, but I lost the device. I've ordered a new one and I'm going to start using Gliderun mostly because of the Google Fit integration. While I'm waiting for my package I've been messing around with your app and trying to figure some things out so I'll be ready to go when my new band arrives. Here's some feedback:
The headphone icon opens up the music controls and the audio notifications; music controls/library only works with music stored on the phone, is there any way to integrate this with Google Music? There's only a couple of apps that I've seen do this (specifically GMusicFS), but it would be nice.
On the user screen: for any user input requiring a number (weight, height, goals, etc.) you have a scrolling number which is nice from a UI perspective, but when I have to enter any of these values for the first time, scrolling is very tedious. This is particularly brutal when I'm trying to set up a goal for the first time, I have to scroll all the way from 0 to 8,000. There should be a way to manually input a number using an on-screen keyboard as well. It also looks like the goal is limited to 20,000 steps, theoretically this should be unlimited.
User profile: I have my units set to imperial. When inputting my height for the major intervals you might want to make the height max out at 7-ft just in case. For the minor intervals, you should put the unit next to the number (inches) and I would limit the user to discrete numbers 1 through 12. I'm not sure how you're calculating height, but the way you have it set up it is very hard for a user to input their height in imperial units. For example: I am 6-ft 2-inches, in order to input my height I have to calculate how many hundredths of a foot 2-inches is. So in my case 2/12=.16666. The average person isn't going to do this and is going to give up when you can't just enter 6-ft 2-inches.
The compass UI needs a little work, it isn't quickly evident where north is. I would prefer a more traditional looking compass (maybe something similar to this). Also, for some reason my altitude is always blank.
Synchronize: I have the first three options enabled for Google Fit integration. The app always says disconnected, when I press the synchronize button it changes to connected, but I don't think anything is actually being synced. There should be some sort of progress bar when synchronizing with Google Fit so the user knows it's actually working. In my case I don't think it's working at all. I've enabled the option to download tracked activities from GFit, but nothing ever shows up in the stats.
In the settings, General: I would make an expert section to the settings menu that has to be manually activated and move Optimize track points and Recalculate calories there. Also for any option where you could be deleting or modifying data (everything under the "Other" section) I would have a confirmation dialog box pop up. That way if somebody accidentally presses one of those options they don't completely wipe out all there data.
In the settings, Audio: I would either explain the difference between Audio engine A and B or give the user an option to play example audio. Similar to how you have the option to "Listen to an example" of text-to-speech output in the main android settings.
In the settings, Notification: I think there needs to be a little more configuration for notifications. I really like the way the Notification version of the MiFit app allowed you to set the colors for the LEDs on the Mi Band as well as the number of times it vibrated and the number of times the LED blinked. I know this is a beta version, but I think a little more work needs to be done in this particular area if you want users to switch from the MiFit app. Being able to tell what app I'm getting a notification from just by looking at the band is extremely useful and it's going to make switching hard without it. I don't want to say you should copy the Notification settings screen from the MiFit app, but it has been implemented very well.
Settings: somewhere you need to provide Help information. For most of the options I'm not sure exactly what they're supposed to do, maybe have a ?-button next to the option that the user can press that will pop up a longer description of exactly what the option does.
Any thoughts on providing a dark theme as well? Just something simple where you change the background to black and the text to white, the green color should look good with both a dark and light background.
I saw you have sleep tracking on the list of things to improve upon, really looking forward to that. The MiFit app and Sleep as Android app provide a very clean UI for visualizing your sleep. I would try to implement something similar. I'm sure you've seen it, but this thread might have some hints on how to better pull the sleep data from the MiBand.
I know I wrote a lot, but you have done great work with this app in the short amount of time you've been developing it. I can't wait to see how this app progresses because I think you've got a really good app here. The design looks very good and polished it just needs a few tweaks here and there. Once I get my new Mi Band I'll provide some more feedback.
Keep up the great work. If you want to discuss any of this more I would be more than happy to do so.
Click to expand...
Click to collapse

Thanks for reading through my comments:
tincore said:
About audio.
I may eventually add a fallback into system players. The player provides a rythm guidance for your exercise by adjusting the playback rate to your desired cadence so it is rather specific. it is custom built.
Click to expand...
Click to collapse
The current implementation is good, it was more of a wish list item.
tincore said:
About scrolling. If you tap you do not need to scroll. You can enter the number directly. This is NumberPicker standard. I may have missed one or two fields though.
Click to expand...
Click to collapse
You're right I don't know how I missed that, apparently I've been using Android wrong this whole time.
tincore said:
I will increase the daily goals to something in the ultramarathon range.
Click to expand...
Click to collapse
I honestly would remove scrolling completely from the goals and just leave it as user input. I don't know if scrolling is very useful when we're talking about differences in thousands of steps.
tincore said:
About imperial input. You are absolutely right. Will change it soon..
Click to expand...
Click to collapse
Thanks
tincore said:
I will see what I can do with the compass. It is all a matter of priorities.
Click to expand...
Click to collapse
I don't see this as a priority, it was just a suggestion. Feel free to put this at the bottom of your list.
tincore said:
Altitude comes from GPS.
Click to expand...
Click to collapse
Apparently I was just in a bad location at the time. However it is reporting a different altitude than GPS Test. Gliderun shows me at an altitude of 119ft whereas GPS Test shows me at an altitude of 233 ft so I'm not sure what is going on. Is there some sort of log I can provide?
tincore said:
GFit issue is a glitch too. Click sync again. I'm now focusing more on FitnessSyncer as it is much more powerful.
Click to expand...
Click to collapse
I don't personally use FitnessSyncer, but I'm sure there are a lot of people who do. Looking forward to GFit integration. One quick question: once GFit is fully integrated, will I be able to sync all the data I collect with Gliderun or is there a limit on how far back I can go? Likewise will I be able to import all of my past GFit data into Gliderun?
tincore said:
Sleep tracking is working. You can see it on Daily Stats. It may need some tweaking though. The band does not really export sleep data so I had to write the algorithms myself and I've already noticed a couple of issues.
Click to expand...
Click to collapse
As I mentioned, I don't have my new Mi Band yet so I can't test sleep tracking yet. When I get it, I'll give you some more detailed thoughts on it.
tincore said:
Also the custom notifications is a great idea. I have to fit that into a general API. The app is meant to integrate other bands. Just need to get some samples.
Click to expand...
Click to collapse
The detailed control over notifications is the one thing I'm going to miss the most from the MiFit app. Hopefully it's not too much trouble to add these controls. The only thing I can think of to figure out how to add these controls would be to decompile the Notification version of the MiFit app or see if the api calls on this website are useful.
The more we talk and the more I mess around with the app the more I'm liking it.

Thanks again for all the valuable input!
Devo7v said:
Thanks for reading through my comments:
Click to expand...
Click to collapse
You are not the first one having trouble with the NumberPickers. I think they are not very well designed. I do not find the field edition intuitive either. Most of the time I forget to click accept so I lose the edition. Maybe I'm doing something wrong.
Devo7v said:
I honestly would remove scrolling completely from the goals and just leave it as user input. I don't know if scrolling is very useful when we're talking about differences in thousands of steps.
Click to expand...
Click to collapse
Yes. The plan is at least to space them in 100 or 250 units
Devo7v said:
Apparently I was just in a bad location at the time. However it is reporting a different altitude than GPS Test. Gliderun shows me at an altitude of 119ft whereas GPS Test shows me at an altitude of 233 ft so I'm not sure what is going on. Is there some sort of log I can provide?
Click to expand...
Click to collapse
At the moment I'm just showing the Altitude reported by GPS and I think that it has to be corrected by a complex calculation that can be retrieved from a webservice. That may be the issue.
Devo7v said:
I don't personally use FitnessSyncer, but I'm sure there are a lot of people who do. Looking forward to GFit integration. One quick question: once GFit is fully integrated, will I be able to sync all the data I collect with Gliderun or is there a limit on how far back I can go? Likewise will I be able to import all of my past GFit data into Gliderun?
Click to expand...
Click to collapse
Last time I tried it I could upload and download all gliderun data. I found GFit rather odd. Up to now it is unclear to me when it really uploads the data to the servers making it is visible from the web or other device. Also you do not retrieve exactly what you save.
Devo7v said:
As I mentioned, I don't have my new Mi Band yet so I can't test sleep tracking yet. When I get it, I'll give you some more detailed thoughts on it.
Click to expand...
Click to collapse
Sleep periods seem rather accurate. Still I have to do something to detect short sleep interruptions. Phases analysis is there too although I think that it has to be taken with a pich of salt. (Not only in this app)
Devo7v said:
The detailed control over notifications is the one thing I'm going to miss the most from the MiFit app. Hopefully it's not too much trouble to add these controls. The only thing I can think of to figure out how to add these controls would be to
Click to expand...
Click to collapse
It is no real trouble. I will add that rather soon (I hope)..

Hey Tincore
I think you have done some really great work on the app .. but when I tried to use it yesterday I got a bit confused (maybe you can help me out here).
I couldn't actually see where my step count was being shown. I was assuming it would be on the activity screen but it just didn't seem to update. Is there a way to force a refresh of the count? The only time the app seemed to update was when I reconnected my miband.
The update to fitnesssyncer worked well .. is there anyway to have it automatically sync (either time period or when you open the app possibly)?
I found a spelling mistake as well Where you add your weight and waist, chest, hip sizes there is a "thight" measurement (im guessing its meant to be thigh).
Thanks for your hard work!

[TASKER][PROJECT] Local Voicemail “Answer Machine”

THREAD INDEX:
I. INTRODUCTION
II. EXPLANATION - WHAT DOES THE PROFILE DO?
III. TECHNICAL EXPLANATION
IV. INSTALLATION GUIDE
V. FAQ
VI. THINGS TO DO IN THE FUTURE
Second Post. CHANGELOG
#_____________________________#​
I. INTRODUCTION
I am a fan of Tasker as it offers lot of possibilities and makes life better [emoji14]
I learned how to use Tasker basically from myself but @Rsroms gave me the basic knowledge to use this awesome app!
If you are new to Tasker and you wanna learn how to get started i reccomend @brandall Guide (Link to the thread: [TUT] The Ultimate Noob/Beginners Guide to Tasker )… you will learn how to make basic profiles or even intermediate profiles.
However i have created this thread to show off and explain one of my profiles… this one is called “Answer Machine” and it is a “local” implementation of VoiceMail in Tasker. I hope you find this thread useful !
II. EXPLANATION - WHAT DOES THIS PROFILE DO?
It’s simple. If a call is not being answered in about 15 seconds (or what you want) i suppose you are not near to the Smartphone so Tasker will automatically answer and play a pre-recorded voice saying for example:
“Record your voice after the *beep*”
When the pre-recorded voice has totally been played Tasker will start to record the caller voice and when the caller closes the call the recording will be saved in a known folder (Voicemail/Recordings).
As i unlock my smartphone a scene will appear where i can see who called me. Here is an example:
Mike - +39 xxx xxx - 20:14 (24 Hour format)
Obviously i will offer the possibility to change:
Time that Tasker has to wait. between the start of the incoming call and Time when it gets answered
The pre-recorded voice
In short now i will write all the actions that will be performed on specific events.
EVENT: Incoming call
ACTIONS TO PERFORM:
Setting %GotCall to 1
How much time has Tasker to wait? -> Wait x (choose your own wait time) seconds.
Answer call
Wait 500 milliseconds
Activate Speakerphone (I have to activate it as there is not the possibility to stream directly into the microphone)
Set the higher volume possible
Play the pre-recorded voice (It will be outputted using the SpeakerPhone)
Wait until the pre-recorded voice message finishes (I have made a recording of 8 seconds so i will set 9 seconds as Tasker's waiting time)
Disable SpeakerPhone (I don’t need anymore the SpeakerPhone)
Now the recording will get started
Write a txt file with: Caller name, Caller number and time (Using append)
EVENT: Call ended
ACTION TO PERFORM:
Stop recording
I do not need nothing else for the “Core” of the voicemail. Now i have to write a summary for the event “Screen Unlocked”... a simple event that occurs when the Screen gets unlocked.
EVENT: Screen Unlocked
ACTIONS TO PERFORM:
Check if %GotCall does not match to 0
(If the condition above is verified then do..) Read The Txt File and load it on %Read variable
Show scene (A scene that allows to see who called you)
Set back %GotCall to 0
III. TECHNICAL EXPLANATION
This project consists of:
1 State “Incoming Call” with: “Voicemail Enter” (enter task) and “Voicemail” (exit task)
1 Event “Screen Unlocked” with “Gotten Call” as task
Now i will try to explain detailed as possible the whole project.
INCOMING CALL (State):
It is a profile which gets enabled when there is an incoming call.
The state i have used to check when a call comes is: State -> Phone -> Call and setting the Type to “Incoming”.
Voicemail Enter (Task):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What i have used is simple and to get everything working i did not use nothing else than Tasker!
As you can see in the Screenshot there are 11 actions.. in border i will write the right name of the action so you can learn what it does:
Variable Set - Create and set to 1 a variable called “%GotCall”. This matter that i’ve got a call and it is useful for next steps
Wait - Setted to 15 seconds by default. This is the time that Tasker has to wait before answer the call … so set it as you want.
Take call - Just a simple action. It answers to the call
Wait - Already explained. In this case i have setted it to 500 milliseconds i need it to activate the SpekerPhone.. we have to consider some Phone latencies.
Speakerphone - Simple action. It allows to turn on or off the Speakerphone :’)
In-Call Volume - Is it necessary to explain? It adjust the in-call Volume [emoji14]. I need it because as i have explained before there is not the possibility to stream a pre-recorded voice directly.
Music Play - It allows to play a music file… or even a recorded message [emoji14]. We have to set the Stream to “Call” and in File the message we want to play
Wait - We will set how many second lasts the Message . If the recorded message is long 6 seconds set this action to 6 seconds and 500 milliseconds.
Speakerphone - Let’s set the speakerphone off as we do not need it anymore
Record Audio - It allows to start recording a call. We can set a specific name… I have setted it to Voicemail/Recordings/%CNAME - %CNUM - %TIME -> where %CNAME stands for “Caller Name”, %CNUM for “Caller Number” and %TIME for “Time” [emoji14]
Write File - It allows to create and write inside a TXT file. I have used it to create something like a log useful for the next steps (I will show this Txt file on the Event “Screen Unlocked”)
Voicemail Exit (Task):
As you can see this task is made just by one fundamental action “Record Audio Stop”.
This action allows to stop the Call Recording triggered before. If you do not add this action Tasker will continue to record NOTHING !
Display Unlocked (Event):
This event gets triggered when you unlock the smartphone and i will use it to show with a simple Scene (Also made with Tasker) the Log previously made using the function “Write File”.
So what i did is to create a profile using Event -> Display -> Display Unlocked and i have attached to it a simple task that i have called “GottenCall”.
GottenCall (Task):
GottenCall is a task made up of 4 simple action. Let’s take a look of what they do
If - It allows to check a condition. I have used it to check if %GotCall differs from 0.. if so means that i’ve got a call!
Read File - Simple action that allows to load a whole Txt file inside a variable. The parameters that you have to set are two: File (Which is destination folder) and To var (Which is the Variable you wanna use for loading the Txt file)
Show Scene - This action shows a scene previously made. I have also changed Display As to Activity, Full Window.
Reset
Voicemail Graphic (Scene):
As i said before i have also made a Scene that looks like this screeshot:
I have used a simple Text Area setting as Text (source) the variable %Read and a simple button with onTap action -> Destroy Scene - An action that closes the Scene.
IV. INSTALLATION GUIDE
Requirements:
Android 2.3+
[/B][/COLOR]
Tasker (Make sure to have the latest version)
Did you find problems during the installation? Check my Tutorial on YouTube...everything will go right! VoiceMail Project Installation Video Tutorial!​
Step by step guide:
Download the project from the thread (you can find it below)
Now open Tasker, this screen will appear
Click on the button Menu and open “Preferences”
Uncheck the Beginner Mode -> This will allow you to import Projects
Go on the main screen of Tasker and click on the Home button
Click on “Import” and go into the folder where you have VoiceMail.prj.xml -> If you have downloaded it using your Smartphone then it is located inside the "Download" folder
As they get imported deactivate them using the toggle available:
Open Es File Explorer and create 3 folders on the root:
-Voicemail
-Voicemail/Recordings
-Voicemail/Speech
Now record your own Message using a normal recording App -> I have used the Preinstalled App inside my Note 4
As you have finished to record move the recorded voice to the folder Voicemail/Speech
Open Tasker and go to the “Task” tab
Open “VoicemailEnter” and then tap on the action number 7. Here you have select your recording. To select the recording click on the magnifier lens and browse to Voicemail/Speech and click on the pre-recorded file! Once you have selected it tap on the top-left corner (As you are returning back).
Go back and open action number 8. Here you have to set how much time is long your pre-recorded voice. So set down Seconds the right time
Go on the main screen of tasker (Profiles) and activate back all my profiles !
All done, test it and let me know how it works !
V. FAQ
Here you can find the frequently asked questions.
Q: Why Tasker doesn't answer the call?
A: Tasker allows to answer Call using a simple action called "Take call" this one doesn't work on Lollipop and in some others devices. If you are running Lollipop you will not have this problem as i perform a Android Version check... if you have a lower Android version than make sure you grant all the permission needed to tasker. If the problem persists:
Enter inside the task "VoiceMailEnterKK&Lower"
.Delete the task number 3
Add a new action Code -> Run Shell and inside Command put: send keyevent 79
Move this action down the 2nd one.
Q: I have Miui and the call doesn't get answered.
A:
VI. THINGS TO DO IN THE FUTURE
Try to find a workaround for Android 5+ -> FOUND !!!
Improve User Interface on Screen Unlocked
Try to implements something to directly stream inside microphone
I hope you liked my thread… any advice are welcome.
Don’t forget to give me a thumb up :good: if you liked my work ​
-

Changelog:
-Added support for lollipop
-Fixed exit task for Incoming Call State
-Added Check Android task which checks for the SDK version.

Reserved #2 :good:

Welcome Aboard.

Which option decides the time to wait before my call gets transferred to voicemail ?
Edit: Sorry. Its option 2.
---------- Post added 09-04-2015 at 12:03 AM ---------- Previous post was 08-04-2015 at 11:49 PM ----------
Not working. It can't answer the call. Phone keeps ringing..

a.broken.star said:
Which option decides the time to wait before my call gets transferred to voicemail ?
Edit: Sorry. Its option 2.
---------- Post added 09-04-2015 at 12:03 AM ---------- Previous post was 08-04-2015 at 11:49 PM ----------
Not working. It can't answer the call. Phone keeps ringing..
Click to expand...
Click to collapse
Yes, Maybe i have To explain it better!
Anyway does it work for you?
Edit:
Which Android version do you have?
It doesn't work on Android 5+

It can work with Android 5+ LP as well. You simply need a standalone plugin for it available at PS.
Btw its same as you referred earlier on " Call Monitor Locale Plugin".
Very Nice & useful info. And well explained as well (Y)

Rsroms said:
It can work with Android 5+ LP as well. You simply need a standalone plugin for it available at PS.
Btw its same as you referred earlier on " Call Monitor Locale Plugin".
Very Nice & useful info. And well explained as well (Y)
Click to expand...
Click to collapse
I have to install Lollipop to find a workaround. Anyway that plugin "Call Monitor Local Monitor" automatically answer to the call as there is an incoming call. Maybe i will use intents and something else

CoolJoseph96 said:
Yes, Maybe i have To explain it better!
Anyway does it work for you?
Edit:
Which Android version do you have?
It doesn't work on Android 5+
Click to expand...
Click to collapse
I am on kitkat 4.4
Maybe it does not work in MiUi ... It can't answer the call.
Also I am kind of noob to tasker. May be I am doing something wrong. After doing all the steps, i turn the toggle for all three profiles to on mode. But in notification, tasker says, no profile active.

a.broken.star said:
I am on kitkat 4.4
Maybe it does not work in MiUi ... It can't answer the call.
Also I am kind of noob to tasker. May be I am doing something wrong. After doing all the steps, i turn the toggle for all three profiles to on mode. But in notification, tasker says, no profile active.
Click to expand...
Click to collapse
Could you send a screenshot of the Task "Voicemail Enter"?
Anyway some tasker's functions are not allowed on every ROMS.

Check them out

a.broken.star said:
Check them out
Click to expand...
Click to collapse
It seems strange as you have Take Call. Take call is an action that answer the call. I hope you have the latest version of Tasker... I Also had some problems with profiles in General. Try to make a simple profile. For example:
-State: When connected to WiFi
Add an enter task with "Open app" action!
Let me know.. Thank you!

I tried to create a simple profile. To turn off data when wifi is connected. And its working when i push the play button inside the task i.e. Mobile data turns off. Which means tasker can handle the thing. But when i connect to wifi, mobile data does not turn off. That means automatic working of profiles is not working. Maybe its because, notification of tasker still says 'no active profiles' in the notification shade
---------- Post added at 08:11 PM ---------- Previous post was at 08:05 PM ----------
Sorry. My simple profile is working. I made a change to it, to turn off mobile data when i open calculator. And its working fine..

a.broken.star said:
I tried to create a simple profile. To turn off data when wifi is connected. And its working when i push the play button inside the task i.e. Mobile data turns off. Which means tasker can handle the thing. But when i connect to wifi, mobile data does not turn off. That means automatic working of profiles is not working. Maybe its because, notification of tasker still says 'no active profiles' in the notification shade
---------- Post added at 08:11 PM ---------- Previous post was at 08:05 PM ----------
Sorry. My simple profile is working. I made a change to it, to turn off mobile data when i open calculator. And its working fine..
Click to expand...
Click to collapse
Okay let's check if Take call doesn't work!
1. Make a Call to your Voicemail Phone :') 2. Don't answer the call... But open tasker. Move to task tab and open "Voicemail Enter"
3. Make a Long press on the action "Take call" then click on The play button situated on the left bottom!
If you get the call answered then we have To check why the profile is not getting enabled on incoming call event!

Okay, i asked my friend to call me. He called, while the phone was ringing, i switched to tasker, and did what you said. And voila, call got answered. So i guess the profile is not getting activated on incoming call event..

a.broken.star said:
Okay, i asked my friend to call me. He called, while the phone was ringing, i switched to tasker, and did what you said. And voila, call got answered. So i guess the profile is not getting activated on incoming call event..
Click to expand...
Click to collapse
So Take Call works perfectly... As I said before check if you have the latest Tasker Version!
There is a problem on the incoming call feature... Did you try to close tasker and Shutdown the screen? After this try to get a call

Hey, its working now.. Thanx a lot. It was some permission problem. I added tasker to trusted apps and it started to work..
Awesome work.. It will be magic if somehow you can make the speech file play through the audio up link. Because its not properly heard at the other end when played through the speaker.. Still.. Hats off to you...

a.broken.star said:
Hey, its working now.. Thanx a lot. It was some permission problem. I added tasker to trusted apps and it started to work..
Awesome work.. It will be magic if somehow you can make the speech file play through the audio up link. Because its not properly heard at the other end when played through the speaker.. Still.. Hats off to you...
Click to expand...
Click to collapse
Could you share your solution and what ROM are you running? I'll add it in OP!
Anyway Yes... i am trying to send the Audio directly with no results yet ... I wanna ask you something.. Does the recording plays with SpeakerPhone??

Rsroms said:
It can work with Android 5+ LP as well. You simply need a standalone plugin for it available at PS.
Btw its same as you referred earlier on " Call Monitor Locale Plugin".
Very Nice & useful info. And well explained as well (Y)
Click to expand...
Click to collapse
Can you link to that plugin? Sorry - can't find it.
I'm on LP 5.0.2 and "Take call" action is not available.

remiotte said:
Can you link to that plugin? Sorry - can't find it.
I'm on LP 5.0.2 and "Take call" action is not available.
Click to expand...
Click to collapse
Call Monitor Tasker Plug-in
I'll explain what does that plugin do.
It's a simple plugin that allows you to trigger some action when call starts or ends. So this plugin will not allow you to replace the task called "Take Call" as you have to manually answer to the incoming call to get the profile activated. However i'm trying to figure out what i can do to get this Project also working on Lollipop. I guess... i have to Install Lollipop on my Note 4 to get started !