Related
THIS GUIDE HAS BEEN REDONE. PLEASE VISIT THIS THREAD:
http://forum.xda-developers.com/showthread.php?t=761819
Just reading through the document now, seems the first link, http://www.soft‐go.com/get/Samsung‐Kies_79632.html isn't working. Not sure if the site is just down right now or if there's a mistake.
Rad_Fishy said:
Just reading through the document now, seems the first link, http://www.soft‐go.com/get/Samsung‐Kies_79632.html isn't working. Not sure if the site is just down right now or if there's a mistake.
Click to expand...
Click to collapse
Thank you I didn't actually add that link it was from systoxity, but i will fix it.
nbs11 said:
Thank you I didn't actually add that link it was from systoxity, but i will fix it.
Click to expand...
Click to collapse
I Fixed it
A few small things:
Intel should be intel.
Under CPU Optimization:
"Samsung’s CPU is set by default the run at 1gHz."
The should be to.
Sideloading:
"(don’t forget that after you install it from the market you still have to go to your app drawer and run busybox once so it installs)."
Should this be after you download it from the market?
ClockworkMod Recovery:
"ClockworkMod written for us by a developer that goes by the name of Koush"
Missing is.
"This gent puts a ton of work into helping us captivate owners out"
Replace puts with put and Capitalize Captivate.
Changing Your Messaging Ringtone:
"well the ones that matter anyway.."
Extra period.
Other than that, excellent guide. I'll definitely be using it when my Captivate arrives.
Rad_Fishy said:
A few small things:
Intel should be intel.
Under CPU Optimization:
"Samsung’s CPU is set by default the run at 1gHz."
The should be to.
Sideloading:
"(don’t forget that after you install it from the market you still have to go to your app drawer and run busybox once so it installs)."
Should this be after you download it from the market?
ClockworkMod Recovery:
"ClockworkMod written for us by a developer that goes by the name of Koush"
Missing is.
"This gent puts a ton of work into helping us captivate owners out"
Replace puts with put and Capitalize Captivate.
Changing Your Messaging Ringtone:
"well the ones that matter anyway.."
Extra period.
Other than that, excellent guide. I'll definitely be using it when my Captivate arrives.
Click to expand...
Click to collapse
Thanks! I fixed all those errors but I'm not gonna upload the new version just yet because I will keep finding more errors so it just seems wasteful. I did not actually write most of the guide myself I just formatted it so there may be some mistakes I didn't pick up on.
i used this guide today and it delivered.
orlandoxpolice said:
i used this guide today and it delivered.
Click to expand...
Click to collapse
If there was anything you found difficult or anything you would like to change just tell me and I will add it to tonight's update.
Hi,
Thanks for publishing this. It looks very useful, similar to Energy ROM.. But I am very new to Android phones (trying this on Samsung Captivate from AT&T, bought yesterday). I am running windows 7 ultimate 64bit and I exactly followed this guide. But somehow I am still not able to see the sd card. I tried placing the update.zip at Computer\SGH-I897\Phone and shut down the phone and tried restarting the phone by holding the up/down keys as well as power button. But after selecting reinstall packages it said could not find /sdcard/update.zip.. Pls held. Again very sorry if I did some mistake..
ask_j said:
Hi,
Thanks for publishing this. It looks very useful, similar to Energy ROM.. But I am very new to Android phones (trying this on Samsung Captivate from AT&T, bought yesterday). I am running windows 7 ultimate 64bit and I exactly followed this guide. But somehow I am still not able to see the sd card. I tried placing the update.zip at Computer\SGH-I897\Phone and shut down the phone and tried restarting the phone by holding the up/down keys as well as power button. But after selecting reinstall packages it said could not find /sdcard/update.zip.. Pls held. Again very sorry if I did some mistake..
Click to expand...
Click to collapse
The SD card is simply the root directory of your phone. You do not need to open a folder, it is the highest folder you can place it in. Hope that helps
Somehow it was not able to find the sdcard root. Then I realized that you mentioned something called as Droid Explorer, I searched for it and installed it on my PC. But when I opened Droid Explorer, my device was not recognized, then I clicked on link on the explorer window, upon watching that video I enabled the USB Debugging, then I was able to see my device, then I selected connect to my device. After that I saw an explorer but it had empty root and I was not able to copy anything. There was a menu button at the top row named "Transfer to device or Copy to device" I selected that and selected update.zip file and tried to transfer. Something happened but still explorer was empty. Then from my phone Top slide down menu I selected mount USB storage and I started seeing windows explorer on my PC. Then apart from other folders I could see a folder sd in the root. Then I again put update.zip in the root.
Then followed the restart sequence, this time it found the file but exited after Signal 7. It was trying to asert something but could not find the correct model number I guess. My cell phone's model number is Samsung i897.
Please help
ask_j said:
Somehow it was not able to find the sdcard root. Then I realized that you mentioned something called as Droid Explorer, I searched for it and installed it on my PC. But when I opened Droid Explorer, my device was not recognized, then I clicked on link on the explorer window, upon watching that video I enabled the USB Debugging, then I was able to see my device, then I selected connect to my device. After that I saw an explorer but it had empty root and I was not able to copy anything. There was a menu button at the top row named "Transfer to device or Copy to device" I selected that and selected update.zip file and tried to transfer. Something happened but still explorer was empty. Then from my phone Top slide down menu I selected mount USB storage and I started seeing windows explorer on my PC. Then apart from other folders I could see a folder sd in the root. Then I again put update.zip in the root.
Then followed the restart sequence, this time it found the file but exited after Signal 7. It was trying to asert something but could not find the correct model number I guess. My cell phone's model number is Samsung i897.
Please help
Click to expand...
Click to collapse
I did not write the PC instructions, so I can not help you (I only have a Mac). But the person who did can probably help you his username is systoxity.
Because not enough errors were found to make it worthwhile to update the PDF i will wait till tomorrow to fix the minor errors.
Good source of information
Thank you for putting this together. I am going to sticky this for the time being.
For installing the latest version of busy box, you should include that before the instructions for running titanium backup...the latest version of busybox installed from the market will work with titanium backup so theres no need to have to click the "problems" button...this way you wont have to do the busybox download step twice...should also save a few megs since titanium backup wont have its own copy of busybox installed BTW nice guide
You can also just mount the phone memory using windows explorer and move the file over. I was never able to get droid explorer to transfer the file. It always said it went but then was never there.
Anyway all I did was connected just as I was going to connect to kies but then when windows asked me what I wanted to do I clicked on open file view and dropped updated.zip on my phone.
Only issue that I had with rooting was I accidentally opened the file in windows(winrar). After I moved the file over it found it and attempted to install it but then exited with an error(do not remember exact error), but had to do with mounting. Anyway I re-downloaded file and saw file size was different. After I moved the file over again everything went great. I still haven't removed bloat-ware and such but thats next on the agenda.
Also I was on windows 7 64 bit, saw some other users in other threads saying they had issues connecting the phone. Everything so far has worked great for me
Thank you very much for this handy pdf file!
Somelinks aren't working
First of all I have to say very good guide for noobs!
1. when I downloaded the update.zip folder I didn't work I guess because the name of Samsung captivate is not in the folder or something. So I just downloaded the other file from the forums.
2. Link to CPU optimization doesn't work.
3. I downloaded the droid explorer. It connected to my phone but I was unable to transfer anything. So I just tapped on the USB connected in the notification bar and mounted the phone. This allowed me to use windows explorer to transfer files. I believe one can transfer files by selecting the option of Samsung Kies under USB settings.
I got all your feedback. It will all be corrected by tomorrow night.
Cool guide however the rumor is the GPS only gets turned on when pulling up an App that uses it, so that step in the "battery saving" section might not be necessary.
Also you may want to replace Market Enabler with Market Access. It's a rehash of Market Enabler but also has a Set on Boot option that keeps it persistent versus being reset each time.
You also Might want to add a Tips/Tricks Section..
Here You can put some cool tips like the one i found out about backlight control.
(found here: http://forum.xda-developers.com/showthread.php?t=735394 )
I can be contacted here: [email protected]
Anyone able to help with Root ? I picked up a link in a HTC thread on Whirlpool
http://forum.xda-developers.com/show....php?t=1192300
got as far as S Off (Security Off), Updated Clockwork Recovery mod- v4.0.1.4, Now I am stuck on To permanently root your Sensation part 3. When trying to update: When I go to flash clock work/Revolutionary it says: (bad) Can't open Install aborted, though that said some users are having this error and the root is still successful according to XDA however for me I got Root check off the Market and it returns a failed result on Basic and some times a pass on Advanced but some times not. Busybox,Super user,Titanium back up are all saying I'm not rooted to don't have Root permissions.
Have a look at the link below it contains 4 photos of my sensations screen as I went through the process it will no doubt give you a better idea of my problem. It's a link to my blog BTW. Any help would be greatly appreciated. I am not a member of XDA so thought I would try my luck here before having to create yet another account somewhere Thank You.
Best look at the photos from bottom to top as they uploaded back to front, order of process is bottom to top.
http://mathewmurrayharrison.blogspot...sensation.html
Phenomenal MATT writes...
Anyone able to help with Root ? I picked up a link in a HTC thread on Whirlpool
So did you download this http://forum.xda-developers.com/atta...8&d=1311991644 file and flashed it via recovery?
I have S-OFF and I flashed that file I have full root. I then used ROM Manager to flash clockworkmod (CWM) because ROM Manager doesn't see the recovery that came with the S-OFF.
I just backed up my Telstra ROM. It just finished a minute ago.
Yes I did flash that via Recovery inc. the old su-2.3.6.1-ef-signed.zip AND the new su-2.3.6.3-efgh-signed.zip.version I've tried the other couple of suggested methods on that link I posted and nothing seems to be working. Sadly can't see were I have gone wrong.
Here is a link to another two photos with the error message I am getting.
http://mathewmurrayharrison.blogspot...blog-post.html
Phenomenal MATT writes...
Yes I did flash that via Recovery inc. the old su-2.3.6.1-ef-signed.zip
Did you install ROM Manager? I installed ROM Manager and used that to flash CWM and all is working fine here.
EDIT:
My bad. You did say you can't get full root. Don't really know why it won't work for you. Mine worked first go.
Phenomenal MATT
Yeah I have Rom manager but I can't do anything with it everything returns an error.
Phenomenal MATT writes...
Yeah I have Rom manager but I can't do anything with it everything returns an error.
I just figured that out, my bad. I understand that rooting doesn't stick.
Phenomenal MATT
Sounds like you were one of the lucky ones cause if you read the comments after the steps many people are have minor issues. I'm ashamed to say I've being at it all day VERY FRUSTRATING !!!
Yes I put the ZIP file into 'The Root' of the SD card (Main section of SD Card) and yes in recovery I can see that zip file but when I click open it says:
Can't open /sdcrd/su2.3.6.3-efgh-signed.zip
(bad)
Installation aborted.
I've tried over 30 times same thing every single time. HEADACHES !!! lol
Sooo looking forward to a solution. I might have to creat a XDA account and post it in the questions section there, looks as though questions are getting answered pretty quick (Good support) ...WITH ALL THAT SAID IF ANYONE HERE CAN HELP I WOULD BE MOST GRATEFUL.
Phenomenal MATT writes...
Can't open /sdcrd/su2.3.6.3-efgh-signed.zip
(bad)
Installation aborted.
You've probably already tried this, but if not, have you downloaded the su zip again? could it be corrupt?
EDIT: I am really new to Android. Got my phone the day it came to Telstra. You are probably better off on the XDA forums.
Phenomenal MATT
I signed up for XDA but they expect you to make 10 posts elsewhere on their forum before allowing you to comment on the Sensation Dev. one (The comments under the instructions in this link:
http://forum.xda-developers.com/show....php?t=1192300
Yeah I downloaded it on PC, Mac, Mac with Boot camp, Zipped, un Zipped and even tried the old Zip file it says to try in trouble shouting section then followed buy the new Zip file.
Awwwww Well Patients a vertue ... Hopefully it's all worth it.
Seems like the guy already gave you your answer. Just download the zip again. You probably have a corrupted download. And make sure that signature verification is off in recovery. Should work.
I've downloaded over 30 times on 3 different computers + straight to Sensation as a hard Disk tried Zipped, unzipped you name it... PC - Mac Normal sd card, Micro SD card... & Also like to add Sign. verify is off too tried it on and off, I a award the file needs to be zipped and that needs to be off just trying everything here pulling my hair out.
Do You go CWM > Advance . backup ur Rom ?
I'm using rev. And I go to backup and restore click on back up after its complete 10 minutes later I go and try to get the zipped file but it fails every time.
Sent from my HTC Sensation Z710a using XDA App
Finally got it to work. I had to download it from the net with my phone to download folder as opposed to with a pc then moving it to main root folder on SD card. Question is now what ? I want to over clock but I want to keep sense. Do all Roms remove sense ? Leedroid ? What else is recommended now I'm rooted. Btw thanks again everyone for your help.
Sent from my HTC Sensation Z710a using XDA App
Thanks Matt
Thanks for posting this, Phenomenal Matt. I had the EXACT same problem that you posted about. Copying the su zip file to my phone's sdcard while the phone was mounted as a drive did not work at all. I had to download the su zip file on my phone before Clockwork Recovery was able to successfully install it and give me root.
I was just on the Google Code website and noticed there's a Nexus S ICS 4.0.4 download. After I downloaded a program that reads TGZ format, I saw there is 4 or 5 img files for the bootloader, system and so on.
My question is, if I copied the zip file as it was will this be recognized by the handset and install as expected or will it just screw things up. The reason I ask is, the previous versions I installed were not like this.
Also I noticed there is some Linux shell files which obviously aren't intended for Windows.
Any helpful feedback would be good and reassuring.
OK I think after a little investigation, it seems this only the hardware binaries and not the actual complete android system. Unless somebody can tell me otherwise.
A quick look through the general nexus s forum would tell you what u want to know.
Hmmm......
So in order to ask a question, I have to check whether somebody asked the same one on my behalf.
Granted but I did do a quick check and never seen nothing jumping out at me. So is there any need to be patronising? As it happens I answered my own question. Just because I have less than 10 posts doesn't automatically make me a numpty.
I was not patronizing.
Being that you noticed the page on google code and are here on xda its just frankly common sense to not search but just look at the general forum
I told you where to get the answers man. There is no logical reason to explain it when it was all explained already this weekend on the same forum.
Patronizing by directing you towards all the info you need. Can't make this up.
interpolate said:
I was just on the Google Code website and noticed there's a Nexus S ICS 4.0.4 download. After I downloaded a program that reads TGZ format, I saw there is 4 or 5 img files for the bootloader, system and so on.
My question is, if I copied the zip file as it was will this be recognized by the handset and install as expected or will it just screw things up. The reason I ask is, the previous versions I installed were not like this.
Also I noticed there is some Linux shell files which obviously aren't intended for Windows.
Any helpful feedback would be good and reassuring.
Click to expand...
Click to collapse
http://www.androidpolice.com/2012/0...ady-to-flash-appears-to-be-the-final-version/
Sent from my Nexus S 4G using XDA
Whether or not you were condescending to me or not isn't a concern of mine. Anyway I have the GSM model as I live in the UK. Just need to check near the end of the month I guess.
Just flash these files on bootloader (while phone is connected to PC and its driver is installed and adb is running in cmd)
Fastboot (--blah,blah.....)
Hmmm...
I need to reinstall of those files. As I recently formatted my main drive. Still have hundreds of things to reinstate.
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Ematic: What is the browser?
What is the browser that is install from factory.. on Ematic devices ..as it is not "Chrome" [It almost looks like Dolphin], when I tried to do a regular .apk install of "Chrome" from the Google store it dies which almost tells me that it need to be pushed into the device. So am I correct that I need to find a downloadable .apk of "Chrome" for Android 4.0.3 ?
bfrench1990 said:
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Click to expand...
Click to collapse
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
fsuinnc said:
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
Click to expand...
Click to collapse
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
bfrench1990 said:
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
Click to expand...
Click to collapse
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
fsuinnc said:
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
Click to expand...
Click to collapse
I'll bet that you can get it rooted. You may have to edit those drivers though since I don't think my girlfriend's tablet isn't the same as the one you mentioned.
If the drivers I posted don't work for you, then open up "android_winusb.inf" from that zip file in your favorite text editor.
Somewhere under the "[Google.NTx86]" and "[Google.NTamd64]" sections, add this:
;eMatic egs005
Remember where you put those, cause what goes under those entries is the hardware ID of your tablet. You can get that by going under device manager and right clicking on your tablet, if it is unrecognized it should have a yellow triangle on it or something like that. Go to properties and go to the details tab, then from the drop down menu, select hardware IDs. In my case, two came up. Just pick one. If that one ends up not working later, use the one you didn't try.
Now, your entries should look like this:
;eMatic egs005
%CompositeAdbInterface% = USB_Install, (your hardware ID)
Next, try to update the drivers on your tablet via device manager. Right click on your tablet like we did last time, and click properties. Go to the driver tab, and hit the update driver button. You'll have to manually navigate to where your drivers are. Select the folder where you extracted the zip to (make sure you have the edited file in there!) and follow the procedure to update the driver.
Next, open up an adb window and type in adb devices. If you have something showing up, congrats! You should be able to try the root tool now. As always, be careful!
eglide pro ll xl
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Livinbad said:
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Click to expand...
Click to collapse
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
bfrench1990 said:
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
Click to expand...
Click to collapse
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Livinbad said:
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Click to expand...
Click to collapse
Check if there's fastboot for this tablet. There's a fastboot command to boot into the recovery. If not, then I would just not flash a Rom
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
Ok, Can you boot to Odin mode (dowload mode)?
TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
buhohitr said:
Ok, Can you boot to Odin mode (dowload mode)?
Click to expand...
Click to collapse
No. Once I used EZ Unlock, I was bricked.
SlimSnoopOS said:
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
Click to expand...
Click to collapse
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
I also have bricked S3 different circumstances but still hard bricked. Nothing I've tried here on xda or anywhere else has worked. I'm going to try this http://www.ebay.com/itm/281217379767?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 . It is probably the cheapest and easiest way.
TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
Click to expand...
Click to collapse
It usually takes a few tries to get it to work, but if you really can't then you can always send it in for a jtag repair.
Mobile tech videos will do it, and there's someone on eBay who will do it for $30. Not too expensive.
Sent from my SCH-I535 using Tapatalk 2
TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img.
And then I can seem to make that run either.
Click to expand...
Click to collapse
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
SlimSnoopOS said:
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
Click to expand...
Click to collapse
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Follow Up: I figured out what I was doing wrong. I was attempting to pull the "bin" file through Win32 and should have been pulling the "zip" file instead. I was able to write the debrick.zip file onto my SD card but wasn't (on first attempt) able to load my phone. Are there any other steps I may have misunderstood or overlooked?
TwistedPoet said:
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Click to expand...
Click to collapse
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
SlimSnoopOS said:
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
Click to expand...
Click to collapse
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
TwistedPoet said:
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
Click to expand...
Click to collapse
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I'm not turning away knowledge. I'm still very new to this and obviously have a hard time following directions. I was looking at the next steps on that guide and am all ready confused enough to not do anything yet.
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Always_Jonezen said:
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Click to expand...
Click to collapse
Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly, I put the SD card back into the phone, put the battery in, and plugged phone into computer. Pushed the power button and the phone came back on.
When you go to download that file with Win32, change the file type to "." - then you'll be able to select the debrick.zip
All files were obtained here - http://forum.xda-developers.com/showthread.php?t=2581166
I hope that helps.
TwistedPoet;49543890. Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly said:
http://forum.xda-developers.com/showthread.php?t=2581166[/url]
I hope that helps.
Click to expand...
Click to collapse
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Always_Jonezen said:
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Click to expand...
Click to collapse
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Always_Jonezen said:
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Click to expand...
Click to collapse
Did you brick BEFORE 4.3? I hovered over this link in SpyroDazee's post: "Debrick if you bricked before 4.3 OTA" and that's the only one that would download as an IMG. Press "Debrick if you took the 4.3 OTA" and it will download as a zip.
Or change the browser that you're using. I downloaded it using Chrome on my MBP.
Sent from my SCH-I535 using Tapatalk 4
I did brick on 4.1.2 and I am using chrome as my default browser