Database Info

Need help rooting g2x 2.3.3

I just bought this phone off of eBay, and I'm trying to root it. From what I read I have to install CWM recovery then flash a rooted stock 2.3.3. So I try to install cwm recovery. http://forum.xda-developers.com/showthread.php?t=1056847 but I am stuck at step 4 after I plug in the usb to my phone while holding the volume bottoms... nothing pops up, no window saying detects a new APX device. Please help this noob.
Sent from my LG-P999 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=1056847
Try this.. Your battery must be out. Double check in device manager that apx is not there. Sometimes it won't show an error or pop up Windows stating "apx device found". Also reboot your computer and try again. My computer for some reason doesn't recognize usb sometimes. Oh and use same usb port
Sent from my LG-P999 using XDA

Thank you but I have tried that post also. Just can't get the apx error to pop up so I can browse the apx folder. I tried just connect my phone to the PC with the phone on but it just doesn't connect....I wonder if my phones usb port is messed up...it charges just fine though.
Sent from my LG-P999 using Tapatalk

Try another one. Reboot both phone and computer. Try a different usb port. It should pick it up. Then continue with your steps. Try installing lg drivers. 1st
Sent from my LG-P999 using XDA

I think did install LG drivers....if you mean that one .exe file call lgdriver...well I guess I'll keep trying hopefully it works.
Sent from my LG-P999 using Tapatalk

It should work then. Try a different usb cable and computer if possible.
Sent from my LG-P999 using XDA

Oh BTW is there any easier way?
Sent from my LG-P999 using Tapatalk

What version windows r u using? Vista have dat problem

I was using window 7. Going to go home later and try another cable with another laptop
Sent from my LG-P999 using Tapatalk

okay, so i tried 4 different types of usb cables and 3 different computers...2 are windows 7 and 1 is windows xp...still stuck at step 4...i dont understand...

There is no easier way. This is the simplest way. I just don't understand why your computer is not recognizing the phone. Maybe it's hardware problems? Did you check under device manager and didn't see apx???
Sent from my LG-P999 using XDA

No I don't see apx anywhere
Sent from my LG-P999 using Tapatalk

lilviet93 said:
No I don't see apx anywhere
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Ok, humor us for a sec (or maybe just me) open up your device manager, with battery out, proper button combo (power+both volume buttons?), phone plugged in and hit print screen on your computer keyboard, then open paint and hit paste. Save that as a JPEG and upload it here.
Sent from my LG-P999 using xda premium

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
There...I even did power+volume bottons. I think there is something wrong with the usb of the phone. I plugged it in the pc with power on and nothing pop up dont even ask me to mount my sd card.

Did you click to open usb controllers. Apx should be in there
Sent from my LG-P999 using XDA

yeah i did, the phone just seem to won't connect at all my nokia phone connects just fine

lilviet93 said:
There...I even did power+volume bottons. I think there is something wrong with the usb of the phone. I plugged it in the pc with power on and nothing pop up dont even ask me to mount my sd card.
Click to expand...
Click to collapse
Weird... I am not seeing any LG drivers in your image? On my PC I have one LG driver under modem (this computer isn't set-up for flashing this phone, my laptop is)
I also used NVFlash (as One click wasn't working at that time due to having 2.3.4 from TMo) and I remembered that I had to install the LG updater tool first to get the latest drivers installed before I used NVFlasher and got everything to work.
I remember it was a real pain at the time due to having GB 2.3.4 from factory, I know you have 2.3.3 but try that step out as it might help.

so how would I use NVFlash to root my phone? If you could please explain the steps thank you

lilviet93 said:
so how would I use NVFlash to root my phone? If you could please explain the steps thank you
Click to expand...
Click to collapse
Wow...it's been so long...
I know I used the LG Updater tool to install the latest LG drivers on the computer
Then I DL'd and used the NVFlasher, following the directions for it (with out the drivers the computer won't see your phone, so you can't update/root it)
This is where it get fuzzy.. I'm sure this loaded CWM recovery on the phone, so all I had to do was boot into it and make a back-up recovery of the phone. Rebooted the phone as normal. Still had phone connected to PC.
From there I loaded the update.zip (of Eagle's Blood current file) to the mem card
Rebooted to recovery, wiped cache, etc.. as in the instructions. Updated zip from mem card. when done, rebooted. Went thru Googles setup. Rebooted again and phone was rooted.
I had all the treads subscribed on my old account, but I lost the log-in info and had to create a new one :-(

well this bring me back to being stuck at step 4 at the beginning of the post. when i try to install cwm via nvflasher my phone won't connect to the pc at all to install apx drivers

Help with fixing my phone (Please help)

I am going to give you the complete situation so you guys can help with the best of your ability. Over the summer I was at my Grandmas house with my cousins and we were playing Minecraft on the iPod and iPad. I knew that they had it in the Android market and tried to get it. No luck because it was not compatible with my device (Motorola Fire XT 530). I read up on a tutorial to get any app in the store and that was to change the build.prop settings to nexus x or something so I could get it. I rooted my phone and tried it but it screwed up my keyboard and an error occured on screen. So I went into this program I had and completely deleted the file(build.prop, still have a back up though). I tried to turn on the phone but it was stuck in a boot loop . So it is still in the boot loop and I cant turn on my phone.
Things I have tried so far:
1. Plugging it into my computer (wont show up)
2. Clearing my memory and cache in recovery mode (still wont turn on)
3. ADB (wont show up, not even in recovery mode)
4. Using this tutorial http://forum.xda-developers.com/showthread.php?t=1920446 (Was able to get into the flash mode but MSM Flash 7227 wont install correctly for some reason (have updated drivers))
5. Cant use ODIN because my phone cant go into download mode
6. Using default recovery (not clockwork, dont think I can get it because I cant turn on phone) to update the file (didnt work because apparently Motorola locks there bootloader)
I dont think I left anything else out and am looking for a solution. I also have default recovery which may be an issue.
Thanks a lot for reading
FroggyWoggy25

Edit: Disregard my post

Froggywoggy25 said:
I am going to give you the complete situation so you guys can help with the best of your ability. Over the summer I was at my Grandmas house with my cousins and we were playing Minecraft on the iPod and iPad. I knew that they had it in the Android market and tried to get it. No luck because it was not compatible with my device (Motorola Fire XT 530). I read up on a tutorial to get any app in the store and that was to change the build.prop settings to nexus x or something so I could get it. I rooted my phone and tried it but it screwed up my keyboard and an error occured on screen. So I went into this program I had and completely deleted the file(build.prop, still have a back up though). I tried to turn on the phone but it was stuck in a boot loop . So it is still in the boot loop and I cant turn on my phone.
Things I have tried so far:
1. Plugging it into my computer (wont show up)
2. Clearing my memory and cache in recovery mode (still wont turn on)
3. ADB (wont show up, not even in recovery mode)
4. Using this tutorial http://forum.xda-developers.com/showthread.php?t=1920446 (Was able to get into the flash mode but MSM Flash 7227 wont install correctly for some reason (have updated drivers))
5. Cant use ODIN because my phone cant go into download mode
6. Using default recovery (not clockwork, dont think I can get it because I cant turn on phone) to update the file (didnt work because apparently Motorola locks there bootloader)
I dont think I left anything else out and am looking for a solution. I also have default recovery which may be an issue.
Thanks a lot for reading
FroggyWoggy25
Click to expand...
Click to collapse
First of all you cant use Odin to flash Motorola Devices because it is meant for Samsung phones.
Secondly answer these questions:
1. In PC which OS are you using?
2. Have you tried reinstalling RSD lite then rebooting?
Having stock recovery is no issue because you can't get any other in this phone.
It is easy to get it back working.
I suggest you to try some other PC.
OR
Follow these steps as in order.
1. Uninstall RSD lite.
2. Uninstall Motorola Drivers.
3. Now first install Motorola Drivers the RSD lite.
I think this may work for you.

I am using windows 7 on a laptop which may be the problem because it may be a hub not directly connected to the mother board. Thank you and I will try your suggestion.
Btw thanks for all your help over the last couple days.
I also used this on two other laptops but the MSM Flash still wont install for some unknown reason. So I dont think using RSD lite is the problem.

Here's the solution
I found the solution to your problem.
Download the attachment.
Extract it.
Copy the file in the extracted folder and paste it in C:/windows/system32/drivers
Reboot your PC
And yes you must connect it directly without any hub or something.
Actually these are the RSD lite drivers which I think your PC was unable to install correctly.

Okay I will try this when I get home from school. If this doesnt work could you try sending me the MSM Flash7227 driver?

Froggywoggy25 said:
Okay I will try this when I get home from school. If this doesnt work could you try sending me the MSM Flash7227 driver?
Click to expand...
Click to collapse
It is that one only.
Sent from my XT530 using xda app-developers app

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my problem after I plugged in my phone in flash mode

Froggywoggy25 said:
This is my problem after I plugged in my phone in flash mode
Click to expand...
Click to collapse
So locate that to C:/windows/system32/drivers/the-file-i-gave-you
It will install its drivers.
OR
Alternate way is to install Motorola Software Update from here
It will install drivers automatically as it also needs phone to be switched in flash mode(i.e. through flash drivers) to update phone software.

aweosomeabhijeet said:
So locate that to C:/windows/system32/drivers/the-file-i-gave-you
It will install its drivers.
OR
Alternate way is to install Motorola Software Update from here
It will install drivers automatically as it also needs phone to be switched in flash mode(i.e. through flash drivers) to update phone software.
Click to expand...
Click to collapse
This didnt work because to update drivers my computer has to recognize the phone which it cant. I would need the driver Flash MSM7227 for it to work. If you could find that EXACT file on your computer and send it to me that would be great. I tried the two things you stated but it says the phone is not connected so I cant download the updates.
This must be very frustrating for you but thanks for your help.

Sorry to say, but you kill boatloader of your phone. That mean msm7227 device.
Sent from my XT530 using xda app-developers app

If any one wants to send me the download of the drivers use this to find them.
http://www.youtube.com/watch?v=jv60G3wH1N8

Froggywoggy25 said:
This didnt work because to update drivers my computer has to recognize the phone which it cant. I would need the driver Flash MSM7227 for it to work. If you could find that EXACT file on your computer and send it to me that would be great. I tried the two things you stated but it says the phone is not connected so I cant download the updates.
This must be very frustrating for you but thanks for your help.
Click to expand...
Click to collapse
Don't know about the problem.
Maybe 64-bit system.
And don't download moto update. Download and install only Moto software update "tool".
I sent you the same drivers. But I think the problem is my 32-bit system or your 64-bit.
No, I am not frustrated, don't worry. :laugh:
Sent from my XT530 using xda app-developers app
---------- Post added at 04:45 AM ---------- Previous post was at 04:42 AM ----------
nesham said:
Sorry to say, but you kill boatloader of your phone. That mean msm7227 device.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
Is it so?
I don't think so.
Have you experienced the same?
Sent from my XT530 using xda app-developers app

Check the link how to obtain the right files for the drivers. Second post from the top of page 2
And its unfortunate we are in very different time zones so its one to two posts per day and we have to wait
And Ive been frustrated since July because I still cant believe I deleted that file xD

Froggywoggy25 said:
Check the link how to obtain the right files for the drivers. Second post from the top of page 2
And its unfortunate we are in very different time zones so its one to two posts per day and we have to wait
And Ive been frustrated since July because I still cant believe I deleted that file xD
Click to expand...
Click to collapse
I know that I have given you the same file.
Don't know why it isn't working.
Sent from my XT530 using xda app-developers app

Are you sure? Because a lot of my things had two different files. Mind quickly checking again?

Froggywoggy25 said:
Are you sure? Because a lot of my things had two different files. Mind quickly checking again?
Click to expand...
Click to collapse
See yourself.
This is when my phone is connected in flash mode.

Okay well thanks for checking

Im thinking about getting another phone because this one is bust.
Im thinking about getting this phone again or getting the mytouch 4g non-slide.
Which one would be better?

Froggywoggy25 said:
Im thinking about getting another phone because this one is bust.
Im thinking about getting this phone again or getting the mytouch 4g non-slide.
Which one would be better?
Click to expand...
Click to collapse
Don't buy this crap again
Sent from my XT530 using xda app-developers app

[Solved][Q]Galaxy tab 2 10.1 p5110 Firmware upgrade encountered an issue

I flashed the cm rom,then wanted to go back to stock JB,and flashed the firmware over ODIN,suceeded.Then it was stuck in a bootloop.I flashed a any-root Stock kernel.still bootloop now on kernel logo,then i tried instaling TWRP,and it FAIL-ed and the TAB froze on the ODIN mode.i turned it off and got the error that firmware upgrade encountered an error and error(phone-yellow triangle--PC) icon.
Please help me!! :crying:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)

Either Kies (safe)
Or odin (development)

dailyuse17 said:
Either Kies (safe)
Or odin (development)
Click to expand...
Click to collapse
Kies didnt even recognise it.
Odin is safest and best.For odin you have 4 steps for flashing,and in Kies you have 12 unreasonable steps.
Sent from my ST15i using xda premium

Marionette said:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Click to expand...
Click to collapse
Whew!!! Found this and recovered my tablet. I was in the middle of flashing it when a co-worker picked it up and the cable came out. Thanks!!

cpufixrman said:
Whew!!! Found this and recovered my tablet. I was in the middle of flashing it when a co-worker picked it up and the cable came out. Thanks!!
Click to expand...
Click to collapse
Glad to help
Sent from my GT-P5110 using XDA Premium HD app

Marionette said:
I flashed the cm rom,then wanted to go back to stock JB,and flashed the firmware over ODIN,suceeded.Then it was stuck in a bootloop.I flashed a any-root Stock kernel.still bootloop now on kernel logo,then i tried instaling TWRP,and it FAIL-ed and the TAB froze on the ODIN mode.i turned it off and got the error that firmware upgrade encountered an error and error(phone-yellow triangle--PC) icon.
Please help me!! :crying:
EDIT:
SOLVED!
PLUG the tablet in the PC,no matter if that error is there,just plug it
start ODIN,it should accept the device and flash the stock firmware(PDA)
Click to expand...
Click to collapse
I can't find the stock firmware for my p5113. I'm downloading something right now that I think is it, but I'm not sure.

dbrinkley3 said:
I can't find the stock firmware for my p5113. I'm downloading something right now that I think is it, but I'm not sure.
Click to expand...
Click to collapse
Looked for p113,but nothing.
Not sure,but with roms,it is said to use p5110 builds.
But i am not sure about firmwares...
Sent from my GT-P5110 using XDA Premium HD app

Marionette said:
Looked for p113,but nothing.
Not sure,but with roms,it is said to use p5110 builds.
But i am not sure about firmwares...
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
Idk, I've just been stuck on this "Firmware upgrage encountered an issue" screen for a while now. I got it after I tried to root my device, but then realized I downloaded p5100 instead of p5113. I kept going to the cwm screen and trying to install it because I didn't realize it was the wrong one, and then on reboot it came to this screen. And piece of **** Kies says it can't connect to my device. It'll just keep saying "Connecting" and then pop up saying error please reboot device.

dbrinkley3 said:
Idk, I've just been stuck on this "Firmware upgrage encountered an issue" screen for a while now. I got it after I tried to root my device, but then realized I downloaded p5100 instead of p5113. I kept going to the cwm screen and trying to install it because I didn't realize it was the wrong one, and then on reboot it came to this screen. And piece of **** Kies says it can't connect to my device. It'll just keep saying "Connecting" and then pop up saying error please reboot device.
Click to expand...
Click to collapse
Keep looking for the firmware for p5113,and when you find it,flash with odin and it will work.
Sent from my GT-P5110 using XDA Premium HD app

Not recognized
The Marionette said:
Glad to help
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,

I had that too!
mrsmalley said:
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
Click to expand...
Click to collapse
To fix this just follow these steps:
1. plug the tablet into your pc
2. open up device manager and delete the driver with the yellow triangle
3. re insert your usb cable and you tablet will pop up in odin!
I foud it out and it worked for me!
but if this did't work try it again until it works.

I cant get mine to work with the rom or odin, still says firmware upgrade failed and stays like that, cant get into recovery mode anymore
mrsmalley said:
My Tab 2 is not even being recognized by ODIN or Kies. The screen about frimware upgrade fail shows up and that is all...Any suggestions?
Thank You,
Click to expand...
Click to collapse

Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
How can i flash the stock firmware if the tablet can't go on "Download Mode"?

willybar said:
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
How can i flash the stock firmware if the tablet can't go on "Download Mode"?
Click to expand...
Click to collapse
Does Odin recognize it?

champ1919 said:
Does Odin recognize it?
Click to expand...
Click to collapse
Yes: but fails
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inviato dal mio SM-G900F utilizzando Tapatalk

[Q] Can't connect to pc

Hello all, so i have a problem. I have a completely stock samsung infuse 4g, running 2.3.6 gingerbread. I would like to root my phone and install a custom rom as i have done before on my last phone, the samsung captivate. I have been running into a problem that continues to annoy me... When i connect my phone to my pc via usb, i get the message on my phone telling me to choose the method i would like to connect, i choose mass storage as i would like to make a backup before i do anything, however, when i choose it, i get the green android logo with the button at the bottom that says "connect to pc". When i click it, the screen thats supposed to show up, shows up, the orange android, however, almost immediately it dissapears before i can even go to "My Computer" to look through the files, and this will happen every time i try it. This has happened since i first got the phone two years ago and has never fixed itself. I have tried multiple usb cables and multiple computers, all to no avail. I'm not new to androids or rooting, but this is just blowing my mind, i cant figure it out. If you guys could help me out, i would greatly appreciate it.

Can you go in to download mode???
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
Can you go in to download mode???
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I havent tried, but would that allow me to transfer files, root, etc?

slayersabre5 said:
I havent tried, but would that allow me to transfer files, root, etc?
Click to expand...
Click to collapse
No but if you can boot in to download mode you can use this to flash the UCLB3 gingerbread 2.3.6 rooted with CWM recovery http://forum.xda-developers.com/showthread.php?t=1613523
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
No but if you can boot in to download mode you can use this to flash the UCLB3 gingerbread 2.3.6 rooted with CWM recovery http://forum.xda-developers.com/showthread.php?t=1613523
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, i can go into download mode. How can i root my phone though without the ability to sync it to my computer?

backup
slayersabre5 said:
Hello all, so i have a problem. I have a completely stock samsung infuse 4g, running 2.3.6 gingerbread. I would like to root my phone and install a custom rom as i have done before on my last phone, the samsung captivate. I have been running into a problem that continues to annoy me... When i connect my phone to my pc via usb, i get the message on my phone telling me to choose the method i would like to connect, i choose mass storage as i would like to make a backup before i do anything, however, when i choose it, i get the green android logo with the button at the bottom that says "connect to pc". When i click it, the screen thats supposed to show up, shows up, the orange android, however, almost immediately it dissapears before i can even go to "My Computer" to look through the files, and this will happen every time i try it. This has happened since i first got the phone two years ago and has never fixed itself. I have tried multiple usb cables and multiple computers, all to no avail. I'm not new to androids or rooting, but this is just blowing my mind, i cant figure it out. If you guys could help me out, i would greatly appreciate it.
Click to expand...
Click to collapse
This method is only going to let you see the internal SD memory . Its not a true backup of your system. Just the storage part. I would like to see a picture of the screen when it is green . This after you selected Mass storage. What version of windows. ? what USB driver for INFUSE are you using. Google account has backed up mostly everything. NOT the ROM. I will be flashing the i997ucb3-CWM-root-deodex-extras.rar Using the Odin Method. Let me know if I can help.

1252 schoobr
Rickrocks013 said:
This method is only going to let you see the internal SD memory . Its not a true backup of your system. Just the storage part. I would like to see a picture of the screen when it is green . This after you selected Mass storage. What version of windows. ? what USB driver for INFUSE are you using. Google account has backed up mostly everything. NOT the ROM. I will be flashing the i997ucb3-CWM-root-deodex-extras.rar Using the Odin Method. Let me know if I can help.
Click to expand...
Click to collapse
i am going to try the method that was suggested, using ODIN to flash everything, including the root. I just gotta see if i can ever get kies to recognize my phone....... once it can i'll begin the ODIN process, but i cant start it till i know if my computer can even communicate with it. and i am using all drivers as provided by the latest version of kies. Windows 7.
[EDIT] i keep getting an error when the drivers try to install, which prevents my computer from being able to recognize my phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Not trying to double post, but i have come to the conclusion that i cannot get this phone to connect to my computer ODIN cant find it, kies cant find it, nothing. and yes it is on the official samsung binary, official gingerbread, everything. I have restarted muy computer multiple times after deleting and re installing drivers, nothing works i dont get it. This is the only thing stopping me........

slayersabre5 said:
Not trying to double post, but i have come to the conclusion that i cannot get this phone to connect to my computer ODIN cant find it, kies cant find it, nothing. and yes it is on the official samsung binary, official gingerbread, everything. I have restarted muy computer multiple times after deleting and re installing drivers, nothing works i dont get it. This is the only thing stopping me........
Click to expand...
Click to collapse
Turn off your computer anti-virus and try again!
Sent from my SGH-I997 using XDA Premium 4 mobile app

This might help
http://forum.xda-developers.com/showthread.php?t=2397092
[HOW-TO] ROOT, CMW, AND JB 4.3 from stock 2.2.1 without a computer [HOW-TO]
Sent from my SGH-I747 using xda app-developers app

Bootloop, can't enter Recovery nor Download mode, I think I f*cked up big time

Hey there,
So I have a 6045Y (5.5), which I kinda bricked? Wanted to install MM on my phone via TWRP, didn't work. Oh, it also deleted my OS.
So I went ahead and tried to install "Project Material" (https://forum.xda-developers.com/idol-3/development/6045-project-material-t3417757), well, didn't work too, "unable to unmount /system". I googled and found out that there's another twrp version that could do that. Then I tried to install the .img file via TWRP too, since I read that it should work. It didn't and now I can neither enter recovery nor Download mode, dba doesn't detect my device too, but my PC does make a sound when I connect and disconnect my phone and I see the battery, while charging the phone.
Any idea would be appreciated.
I'm dumb, I know, please don't be too hard on me!
Edit: The title could be missleading, I can still turn on my phone! I'm stuck at the Alcatel logo though.

Akrosmex said:
Hey there,
So I have a 6045Y (5.5), which I kinda bricked? Wanted to install MM on my phone via TWRP, didn't work. Oh, it also deleted my OS.
So I went ahead and tried to install "Project Material" (https://forum.xda-developers.com/idol-3/development/6045-project-material-t3417757), well, didn't work too, "unable to unmount /system". I googled and found out that there's another twrp version that could do that. Then I tried to install the .img file via TWRP too, since I read that it should work. It didn't and now I can neither enter recovery nor Download mode, dba doesn't detect my device too, but my PC does make a sound when I connect and disconnect my phone and I see the battery, while charging the phone.
Any idea would be appreciated.
I'm dumb, I know, please don't be too hard on me!
Click to expand...
Click to collapse
What twrp version did you have? and you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk

Alek Dev said:
What twrp version did you have?
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
I think 2.8.7.0.

Akrosmex said:
I think 2.8.7.0.
Click to expand...
Click to collapse
you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk

Alek Dev said:
you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
Oh, really?
Thanks, I'll try that!

Alek Dev said:
you can try with panasonic eluga switch firmware program i had the same issue and i just wait to come charging icon and connect to pc and then program detect the device and switched to download mode
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
Hmm, sadly my phone won't show up, even though I did install the drivers. What could be the problem?
Also, my PC detects my phone as a MTP USB Device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}