Related
So yesterday I went out to dinner, grabbed my trusty TP2 and put it in my pocket (uncracked), reached out location and pulled it out (cracked). I know there was no impact between the two locations as I simply sat in a car the whole way.
Anyone else have something similar? Glad I have insurance, that's for sure.
Is it possible you had the screen facing out in your pocket? What I mean by that is when I keep mine in my pocket I make sure the screen is against my leg and not facing forward.. Either way, good thing indeed that you have insurance..
it is, but its a coat pocket. I Just couldn't believe it happened as I've had a touch screen phone for the last...3 or 4 years without issue.
if you have made fun of someone that has a case on there hip that is why it happend to you if not then its bad luck.
do you really believe that crack could appear after no physical impact?
I've seen crazier things happen. My one thought was that its quite cold here right now. Either way, I definitely didn't have any impact that I felt, which shouldn't be enough to crack a screen like this did. I just expect more out of HTC I guess.
A screen protector like invisible shield would help i have it on mine...only thing i hear is that when used in ur pocket it can pick up a lot of lint but so far mine hasn't had that problem. any little bit of dust i see on it i just rub it off
I've got ghost armor, when they get back in stock and i claim my insurance i'm going to start using a slip in case.
football0552 said:
So yesterday I went out to dinner, grabbed my trusty TP2 and put it in my pocket (uncracked), reached out location and pulled it out (cracked). I know there was no impact between the two locations as I simply sat in a car the whole way.
Anyone else have something similar? Glad I have insurance, that's for sure.
Click to expand...
Click to collapse
Yep. A couple of days ago I got into a car, the TP2 in my pocket (which was hanging...unzipped jacket) closed the door and crack! Lovely cracks spread across the screen of my beloved and not even 30-day-old TP2.
I should have known better, The same thing happened to one of my Moguls earlier this year. The weird thing is, the TP2 still works perfectly. I tried to get a return authorization, but Sprint referred me Assurion, which means $100 deductible. The only good thing about it is that the TP2 is so new, they don't have any refurbs to send out, so I'm getting a new one, with one year warranty. From now on, cases only... no pockets!
Not sure what happened in your case,
A: My assurion deductable was $39... I could have sworn it was $89.
B: I need to find a good stiff slide in vertical case that I can just slide the phone into and out of in my pocket.
C: Assurion says they'll get my phone to me Tuesday (i.e. out Monday).... either they're full of cow chips or they purchased a stock just in case since Verizon is apparently trickling in shipments.
what was the temperature outside ?
if it was decently cold, and your phone was cold as well, cold things always crack easier, especially with a screen this big. smaller the screen, harder it is to break.
haha, well it was cold for this time of year. nothing terrible. about 20 degrees F. I know the size matters, I just couldn't believe it cracked so easily so I was really just fishing to see if its a possible problem. My replacement will be here today and i've been trying to find a good STIFF slide in vertical case I can just keep in my pocket.
I live in Canada and on occasion it gets down to -25 degress c here (-13F)
and I have left many cellphones out in the cold, with no ill effects (although screen response can slow down dramatically while it's cold)
the only thing that would crack it is a dramatic change in temp. over a short period of time, like 80 to -5 and I don't even know about that.
a screen skin is NOT going to prevent cracking, only scratches, the LCD glass is on the inside of the device and a think film doesn't add anything to stability.
my guess is it got flexed are banged in the wrong spot. possibly a few days earlier which weakened it and then lightly banged again when you put it in your pocket...
of course a defect in the internal glass is possible, when you get in to mass production of a product there are bound to be some defects.
mine on the other hand has traveled 10 feet across from say 4 feet up and hit pavement with no more than a 1mmx3mm indent on a corner.
it's in general a well build device (but boy was I sick when that first happened)
My advice, if your insurance costs money.. bring it in with a little story.
"I was sitting at a table and typing away I closed the keyboard, and I couldn't believe it a crack appeared across the screen"
As long as it is a solid crack across the screen with no obvious point of impact, I am pretty sure you will get away with it.. even with out insurance.
Football, Telus here in Canada has a thin hard plastic case for 15 canadian.
it will even prevent your screen from getting scratched. and makes that annoyingly placed "power"/screen blank button harder to push. I am pretty sure all the cdma devices are the same, but I don't know 100% I ordered a verison screen protector, and it fits. but the tolerances aren't as high for that
I had the same thing happen to me just a week ago. Slid it into my pocket and not even three minutes later, pulled it out to use the phone and had fresh cracks spreading across the screen. The phone did not come into contact with anything... Still a mystery to me as to how it happened!!
BTW... If you were looking at the phone in the upright position, the screen cracking started from the left middle of the screen and made it's way across to the bottom right corner. Just wondering if anyone else has had the same pattern.
twasnow said:
I live in Canada and on occasion it gets down to -25 degress c here (-13F)
and I have left many cellphones out in the cold, with no ill effects (although screen response can slow down dramatically while it's cold)
the only thing that would crack it is a dramatic change in temp. over a short period of time, like 80 to -5 and I don't even know about that.
a screen skin is NOT going to prevent cracking, only scratches, the LCD glass is on the inside of the device and a think film doesn't add anything to stability.
my guess is it got flexed are banged in the wrong spot. possibly a few days earlier which weakened it and then lightly banged again when you put it in your pocket...
of course a defect in the internal glass is possible, when you get in to mass production of a product there are bound to be some defects.
mine on the other hand has traveled 10 feet across from say 4 feet up and hit pavement with no more than a 1mmx3mm indent on a corner.
it's in general a well build device (but boy was I sick when that first happened)
My advice, if your insurance costs money.. bring it in with a little story.
"I was sitting at a table and typing away I closed the keyboard, and I couldn't believe it a crack appeared across the screen"
As long as it is a solid crack across the screen with no obvious point of impact, I am pretty sure you will get away with it.. even with out insurance.
Click to expand...
Click to collapse
To keep it short, I know, I know, I know, and I know. lol. (Just for an interesting note, being in South Dakota for College I've had it around that cold without a windchill... walking to class and having your eyelashes freeze in a block sucks.)
I was more or less just trying to come up with the most plausible excuse even though I was sure (99.999%) it wasn't the cold. It just completely blew me away that I pulled it out and there was cracks across the screen because at the point I hadn't even dropped the phone and as previously mentioned I wasn't leaning or really touching anything while riding in the car.
Also, generally its not actually glass that's on resistive touchscreen's as far as I know. I wasn't trying to insinuate that the screen skin would help stability at all (actually stiffness... don't get my started about this I've been dealing with stiffness matrices WAY to much lately in class).
I agree in general it seems quite well built, and agree if my case is isolated but I was wanting to make sure it was. A point of note is that the crack originated on the far right side and propogated in a couple of lines across the screen. Really my guess is that the method they use to connect the "glass" (a plastic..?) produces some residual stresses around the edges of the material.
Finally, where do you get the case you have? I really just want a slip case as I mentioned that is pretty stiff so that anything that may possible break the screen gets spread out over the area of the case. I am trying to stay away from a snap on hard case as I find them bulky, get your device dirty, and really don't protect what I want to protect.
Thanks for your input.
wbchristmas said:
I had the same thing happen to me just a week ago. Slid it into my pocket and not even three minutes later, pulled it out to use the phone and had fresh cracks spreading across the screen. The phone did not come into contact with anything... Still a mystery to me as to how it happened!!
BTW... If you were looking at the phone in the upright position, the screen cracking started from the left middle of the screen and made it's way across to the bottom right corner. Just wondering if anyone else has had the same pattern.
Click to expand...
Click to collapse
mine cracked middle right and propagated in a crack more or less horizontally across the device and another at about a 45 degree angle towards the bottom of the screen. The instances sound similar just reversed.
The reason your screen cracked was most likely it pressed up against the seatbelt buckle. I have had this happen a couple of times. When driving now I ALWAYS take my phone out of my pocket or remove the case from my belt. As I said, a couple times I left it there and when I buckled up, the buckle of the seatbelt was pressed against my right hip. A little bit of pressure, like from stopping the car, is enough to crack the glass.
So word to the wise, do NOT leave your phone in your pocket or on your belt when you get into a car. Or if you do, put it on the side of your body that is facing away from the seat belt buckle.
docgiggs said:
The reason your screen cracked was most likely it pressed up against the seatbelt buckle. I have had this happen a couple of times. When driving now I ALWAYS take my phone out of my pocket or remove the case from my belt. As I said, a couple times I left it there and when I buckled up, the buckle of the seatbelt was pressed against my right hip. A little bit of pressure, like from stopping the car, is enough to crack the glass.
So word to the wise, do NOT leave your phone in your pocket or on your belt when you get into a car. Or if you do, put it on the side of your body that is facing away from the seat belt buckle.
Click to expand...
Click to collapse
Haha, I already do this. Actually, I was in the passenger seat and the phone was in the right pocket of my fleece jacket. I'm just the jacked it what damned me because normally when I put it in my pants I have the screen facing my leg.
Is this something that asurion will cover?
Let me tell you, it was a BRUTAL fall. Battery cover and battery flew off and the phone fell pretty hard and flew off the treadmill onto concrete. I was running on the treadmill at about 7mph.
Needless to say, the phone doesn't have a single scratch on it! Nothing! I thought for sure it would have dented or scratched but it didn't. No case either. That's HTC build quality for you! I guarantee any plastic phone would have dented and scratched like crazy.
I've had this baby since launch with no problems. This is the first android device that I've owned and I've been completely happy with. Most phones end up lacking something but this phone has EVERYTHING! There's no way you could complain about a missing feature.
HTC Glacier Running CyanogenMod 6.2
Whew. Good thing it didnt bust. I like your reviews lol
that is truly insane. Im coming from a motorola cliq, and this thing astounds me everytime i boot it up.
Oh,and since seeing is believing, could you post some pics?
i am a bit shocked that there wasn't even a scratch lol
seeing how i scratched mine in purse
Arcadia310 said:
Let me tell you, it was a BRUTAL fall. Battery cover and battery flew off and the phone fell pretty hard and flew off the treadmill onto concrete. I was running on the treadmill at about 7mph.
Needless to say, the phone doesn't have a single scratch on it! Nothing! I thought for sure it would have dented or scratched but it didn't. No case either. That's HTC build quality for you! I guarantee any plastic phone would have dented and scratched like crazy.
I've had this baby since launch with no problems. This is the first android device that I've owned and I've been completely happy with. Most phones end up lacking something but this phone has EVERYTHING! There's no way you could complain about a missing feature.
HTC Glacier Running CyanogenMod 6.2
Click to expand...
Click to collapse
And here I thought you might be trying to use this as an excuse to not workout anymore
I've dropped my MT4G from my car seat to my center console where the hand brake is (a distance of about 4 inches) and the cover came flying off. I find it a little odd, because I can't for the life of me get the cover off normally. I usually have to use a flat-head screwdriver to pry it off.
On another note, my old G1 could take abuse like no other. Dropped onto concrete numerous times, put through the washing machine while it was powered on. The thing just kept on working.
I know it sounds funny but most newer phones are actually designed to let the battery cover an battery come out of the device when dropped. Thats why it happens all the time. I think of it as possibly a way to help prevent further damage. If you think about it the battery is one of the heaviest parts of the phone and after ejected the phone becomes lighter so there is less chance of damage. It could even have a recoil effect where the energy that pushes the batter cover and battery out takes away from the energy of the device hitting the surface dropped on.
This is just my opinion.
I have to think that's right because every time I've dropped my MT4G the cover and battery explode off almost like magic, but it doesn't come off too easy in hand and has never accidentally come off OTHER THAN when it was dropped.
Yea it's supposed to fly off. You usually see the battery door flying off, spinning through the air. Imagine if all the energy that made the battery door go flying were instead sent to the phone's structure... would be a lot worse. Same reason cars have crumple zones =)
bobsbbq said:
I know it sounds funny but most newer phones are actually designed to let the battery cover an battery come out of the device when dropped. Thats why it happens all the time. I think of it as possibly a way to help prevent further damage. If you think about it the battery is one of the heaviest parts of the phone and after ejected the phone becomes lighter so there is less chance of damage. It could even have a recoil effect where the energy that pushes the batter cover and battery out takes away from the energy of the device hitting the surface dropped on.
This is just my opinion.
Click to expand...
Click to collapse
No kidding lol, that's crazy. My battery door flew off so fast I thought for sure something was wrong.
Man I love this phone.
HTC Glacier Running CyanogenMod 6.2
carmeng4evr said:
i am a bit shocked that there wasn't even a scratch lol
seeing how i scratched mine in purse
Click to expand...
Click to collapse
The purse is a dangerous place. I've seen some really strange things in there, no place for a $500 phone.
HTC Glacier Running CyanogenMod 6.2
I would wear mine around my neck before I would put it in my wife's purse. Gorilla body armor couldn't protect it in there.
I dropped mine 3 times, onto my wonderful dining room tile floor. The 3rd time was the kicker, it broke the screen. My G1 had been dropped a thousand times and came through like a champ. I love this phone, though I don't think it can take the kind of abuse that "2 young kids who fight over who gets to hand Dad the phone when it rings" can bring. I think it is time for me to get a decent case for it.
Arcadia310 said:
The purse is a dangerous place. I've seen some really strange things in there, no place for a $500 phone.
HTC Glacier Running CyanogenMod 6.2
Click to expand...
Click to collapse
Lol well my jeans are often too tight for it to go in my pocket
and i hate clips because there again...too tight
so the purse is the only place it can go
although sometimes i am just holding it in my hand
Hi all i would just like to share my experience with this case..Last week i had the unfortunate accident of dropping my Samsung galaxy s phone in the toilet at home...
The phone fell out of my pocket and straight in too the pan and finally landed in the u-bend.
The phone was in total water submersion for not more that 3-5 seconds..my heart fell to the floor...
I quickly grabbed the phone from the toilet..turned phone off and removed the battery..water was all inside the phone.
I shook the phone and lots of water came out..my thoughts at this time was phone was well and truly buggered.
I proceeded to dry the phone on my radiator at home..sim-card,sd-card,battery and back plate all removed to aide drying.
Left the phone to dry for a full 24 hrs...before attempting to turn phone back on.
There was condensation inside the phone which all dispersed after 24 hrs. of drying out the phone.
And the big moment arrived of putting the phone back together to see if it would ever work again....
My heart was pounding at this time hoping and willing the phone back to life..pressed the power on button and the phone came to life.
Apart from having to do a reset on the phone and re-installing all my apps there has been no problem with the phone working 100%.
Phone has been working for well over a week now with no problems.
How lucky was I??...Im not saying that the Casemate Toughcase is the be all and end all in cases but im sure it went some way in helping reduce the damage that would have been caused by water ingress in to the phone.
happy case hunting...
Ewwww That Dirty Samsung Galaxy S
Lol..must add the water in toilet was clean...
The tough case was not the parameter influencing the luck in this case. As long as the rear speaker hole is not sealed, the water will always have a way inside the phone, no matter how many shock protection layers you have o the phone.
And generally speaking, tap water is not dangerous for the electrical parts of low voltage powered devices (like watches, phones and so on). The main issue with phones dropped in water is that the water will infiltrate in the optical dispersers of the LCD screen and on the screen connectors, generating blurry pictures or no picture at all.
I've learned something from your experience ... the water will not go in between the OLED screen and the digitizer .. which is a GOOD thing.
Great! I'm glad your SGS survived!
just take more care of it, ok? and don't drop it on Sea Water!
any waterproof supplies for galaxy s?
alex.bacer said:
any waterproof supplies for galaxy s?
Click to expand...
Click to collapse
Zip-lock bag?
I've almost fell from my seat reading the end of your story. I am glad to read that everything went Ok. But does the phone smell .... hmmm different?
Truly lucky.
Sent from my GT-I9000 using XDA App
There are better ways to change the colour of the phone
Update phone still working a OK two and a bit weeks on...
I have toughcase as well. Not the prettiest case, the phone loses it's "luxury" feeling, but you can certainly throw around the phone no problem.
I dropped my Galaxy S (with Tough Case) today, it fell directly on my hard tiles floor at a height around 70cm. I was really freaked out! I picked it up and it was still there like nothing happened (no crash, no slow, no reboot, no nothing) really happy that I chose this case!
thanksss a lot for content
my skyrocket got dropped in water i pulled it out put it under a hair dryer and it works, kind of. i use it as my primary phone right now but sometimes it freezes and the touch sensitive keys dont work the it either a) shuts off or b) i have to take the battery out.
any idea what replacement part or parts i could possibly change to fix this?
A new phone you prolly toasted the pcb
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1582881
Link to thread with link to AdamOutler video recovering from water. Take apart if you can. If left as is, you may expect further deterioration of the internal components and connections.
dac1227 said:
http://forum.xda-developers.com/showthread.php?t=1582881
Link to thread with link to AdamOutler video recovering from water. Take apart if you can. If left as is, you may expect further deterioration of the internal components and connections.
Click to expand...
Click to collapse
Issue is he has been running it already
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
nrm5110 said:
Issue is he has been running it already
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Right. All the damage is already done. He didn't care for it properly immediately after it got wet.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
It ain't over till it's over.
I had the proverbial "Bad Day" yesterday, or rather, my poor Skyrocket did. It went from being perfect, not so much as a scuff on it to: a) Dropped onto my CEMENT driveway from a height of almost 6 feet. How is this possible, you may ask? I was leaning over the porch rail to open the recycling bin, instead of going around and down the stairs... PURE LAZINESS is what it was! Anyway, it slipped out of my top pocket, in spite of the fact that I was trying to hold it with my fore arm. Why of WHY did the Skyrocket have to be so slim and sleek! The phone hit the cement, bounced once or twice, and then slid, ON IT'S FACE about 3-4 feet, with me making that scream you do while breathing in; kind of a "Uuuoooaaarrrrggghhhh" is the best I can describe it. I followed this by grabbing the phone, taking it inside and throwing an ever loving **** fit. I proceeded to throw the phone on the couch (Even during a full blown hissy, I try to protect the damn thing!) and as I examined it, it was one of those "It could have been much worse" things, that we try to comfort ourselves with, and amazingly they do help, even if it's BS. The damage was 100% to the front black chrome bezel (around the front edge of screen) - A part that in fact CAN be replaced, but requires COMPLETE disassembly, including separating the Screen from the digitizer, which I have no clue how to do. It may NOT be possible, in fact without breaking a layer of adhesive. EVERY other part of the phone is replaceable, in modular sections, I know, and will explain in a moment.
So... bad day right... well that would had been enough since I love my phone as many folks on XDA understand, but nooooooo. I had to then drop it in 8 inches of standing water. Yep.
Was in the bottom of my above ground pool trying to restart a siphon for draining it, when, "SLIP" I %&*&#@ DID IT *@#&$% AGAIN!! *#$%&!!
Phone drops STRAIGHT TO THE BOTTOM OF THE HALF FOOT OR SO WATER IN THE POOL!!!!!!!!
Ok, so I almost NEVER keep my phone on me when doing physical work of any type. When I work on my cars engine compartment, or crawling around under it, I put my phone in the car. Even when I dry my car after pulling out of the car was the phone gets taken OUT of my top pocket and put somewhere safe. I guess I got complacent, since I hadn't had "an incident" in several years. Even with my 5" Dell Streak, beast that it was, I never let it slip from my standard place of Top shirt pocket. Every time I lean forward, my hand or forearm holds the phone from slipping. It is a motion as natural to me as shifting while driving, without even thinking about it. But even I know that "**** happens" so, lesson learned: I am going to bite the bullet and get a nice slim cover for the Skyrocket. NOW THAT IT WORKS AGAIN....
So after I pulled it out of the water I was in full panic mode: I quickly patted it in my shirt, but even while it was still wet and dripping, I RIPPED the back cover and battery out. In hindsight, I wish I had worked to dry the exterior quickly, and THEN opened it. The battery liquid detector wen bright read... CRAP! The PHONE liquid detector stayed WHITE… Ahh, finally caught a break. So after a basic dry everything I can reach (and the Sim came out wet, and the microSD came out wet, not good signs) I tried a quick power up.... The SkyICE animation began, then suddenly changed colors and turned pink/red.. WHOA.. STOP THE BOOT! So I yanked the battery.
After quite a bit of further drying, warm gentle air across the back for a venturi effect (sure!) another try and the screen behind the Samsung logo was bright, blood red, instead of black...
THIS convinced me to take the sucker apart, and for the most part I did really well. I did break ONE tab on the "body" of the phone - that holds the back section over the PCB on, but fortunately there are 7 screws, and it fit tightly when reassembling. I DID frin s coupe drops of water, though they did not seem to be in spots that would short anything, like on the stainless cover over the Qualcomm Processor, but those were just what I could see, without magnification. I dried those, blew warm gentle air over the PCB, and then gently warmed the parts over a low wattage bulb in a lamp.
I am SO impressed with the construction of this baby! I WOULD prefer more alloy, and less plastic for frame, shell & body parts, but what AMAZED me were the connections for all the ribbon cables, between modular PCB's (Like the one on the bottom with a antenna, USB port, Speaker, Mic and capacitive touch buttons, and others... The ribbon just comes around from behind, and attaches via a snap in connection to a receptacle soldered onto the corresponding PCB. In the video of the guy taking it apart, he just goes around and pops up 5 or 6 of these in about 10 seconds total time elapsing. Anyway, check out the middle section of the video I post here, right after he pulls the rear frame off... you'll see...
Bottom line? It's maybe NOT too late for the OP... Granted the more he runs it with a short or worse, the more potential damage. But in my experience it is REALLY difficult to get ALL the water out of a current design phone. It just travels from section to section, His best option (besides either trashing it or paying for repairs is doing what I did. Parts are readily available from Hong Kong, and short of the Screen/Digitizer, most are reasonably priced. Good luck with it. Get a jewelers screwdriver, and a plastic "separator" before starting. My only warning: When separating the main frames, after removing the 7 screws holding the two main frames together, use a CURVED separator, and try to bend the frame that’s the back of the phone OUTWARD a little bit. In other words, pull it OUT as well as spreading the two halves. I did not have a curved plastic tool, just a straight one, and as I pulled the two halves apart, I did not bend it out (away from an inner opening, that tabs go into from the back frame, and I snapped one of the inner openings edges. Think of it as tiny tabs that you want to pull up out of a depression before pulling the parts directly away from each other.
Aww, hell, just watch the video closely, I repeated some sections a few times before trying the procedures.
http://www.youtube.com/watch?v=vf6jqYejWNU
Sorry for the lengthy post, but if I can save ONE person the pain of losing a good friend, then I think my life van finally have true meaning. Or something like that.
Why would you power it on so soon without even taking it apart to dry out?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
You see this guys pinky nail?!? Whou. I couldn't stop looking at it. I bet i can guess what its for
Sent from my SAMSUNG-SGH-I727 using Tapatalk
should've left it off and left it in sack of rice for a day or so. RIP your phone...
Bricks don't fly or float.
Sent from, The Eclectic Chair.
At least he didn't drop it in the water during a mini bath
Sent from my SGH-I727 using xda premium
jnicks510 said:
should've left it off and left it in sack of rice for a day or so. RIP your phone...
Click to expand...
Click to collapse
Yeah I was about to mention rice
Sent from my SAMSUNG-SGH-I727 using xda premium
Well, I dropped my skyrocket in water a couple days ago but fished it out instantly.
Learning from past mistakes, I immediately turned it off and took the battery, sim and memory card out. After I took a paper towel and tried to dry as many cracks and openings as possible until I saw I could not get any paper towel wet. I put the phone and battery in a sealed bag filled with rice and left it for 3 days. When I took it out, the phone was covered in rice dust so I took compressed air and tried to blow it clean. Praying it worked, I put the battery in and turned it on. Miraculously it booted like nothing ever happened.
I heard online to not use a hair drier as you will blow the water into components which were initially not wet.
"I heard online to not use a hair drier as you will blow the water into components which were initially not wet."
This. Definitely avoid hairdryers. Rice is like magic. I have only dumped one phone in water (it was an iPhone 3GS on and playing a video at the time! Then I had a hellish time getting it to turn off... kept turning back on.) I popped the screen and gave it a rice bath for a couple days. It was as good as new after that. (Well, as good as any iPhone can be, anyway. )
Anybody else getting their device twisted? I have noticed several times now my phone isn't sitting flat on the table, I pick it up and look at it and its obviously twisted just a tiny bit so that two opposite corners are touching the table and I can rock it back it forth slightly... I can easily bend it back flat with minimal force and it sits dead flat. Pop it in my pocket for a few hours and it's twisted slightly again.
Not sure if this is a real issue, or just normal by design.
Not yet. Mine still lays perfectly flat.
Mine is fine, but the whole 'polycarbonite' thing can be concerning... I know cases can suck, but for something like our define, it's necessary, sadly... But I guess that's what we get for not purchasing the actual Pixel 3 ??
champ784 said:
Mine is fine, but the whole 'polycarbonite' thing can be concerning... I know cases can suck, but for something like our define, it's necessary, sadly... But I guess that's what we get for not purchasing the actual Pixel 3
Click to expand...
Click to collapse
Ill take something durable like Polycarbonite over a glass phone any day. It was a main reason I didnt go with the Zenfone 6, OP7 Pro, and Pixel 3 XL. Heavy and delicate is not a good combo.
ctfrommn said:
Ill take something durable like Polycarbonite over a glass phone any day. It was a main reason I didnt go with the Zenfone 6, OP7 Pro, and Pixel 3 XL. Heavy and delicate is not a good combo.
Click to expand...
Click to collapse
I miss my OnePlus 3 which was aluminium.. that was and always will be my favorite phone from back in the day and it was great!
I noticed this on the day I bought mine, but straightened it out and haven't noticed it since - thought I was the only one!
DanielF50 said:
I noticed this on the day I bought mine, but straightened it out and haven't noticed it since - thought I was the only one!
Click to expand...
Click to collapse
Nope... I have tried various things now that I have noticed it, like putting it in different pockets, and it still twists a little bit. Seems to be engineered that way, it never flexes very much and doesn't seem to be any damage to anything (so far).
acejavelin said:
Nope... I have tried various things now that I have noticed it, like putting it in different pockets, and it still twists a little bit. Seems to be engineered that way, it never flexes very much and doesn't seem to be any damage to anything (so far).
Click to expand...
Click to collapse
Ah, that's annoying! I haven't noticed it since, but was super annoyed when I first noticed it as I came from a Nexus 6P which also bent, but bent permanently
Mine has the same problem. I have had a case on this since the second week of owning it, previous to the case I never had this twist or bend problem.
Hell mine is in a Spigen case. It's been dropped, stepped on, and still it lays flat.. Mine gets flung around all the time in my work truck.. It hits the floor more than it stays on the dash. That's probably why it gets stepped on a lot.. Me not knowing it's there until I actually look for it and find it under my feet. LOL
have the same "problem". for me it's just a little annoying having to unbend it sometimes. I recently bought a rhino shield case, and since then it didn't happened again... but sometimes I use it without the case and at the end of the day it's twisted like crazy, always to de same side...
it's just plastic after all, I'll take it over glass and metal phones any day
acejavelin said:
Anybody else getting their device twisted? I have noticed several times now my phone isn't sitting flat on the table, I pick it up and look at it and its obviously twisted just a tiny bit so that two opposite corners are touching the table and I can rock it back it forth slightly... I can easily bend it back flat with minimal force and it sits dead flat. Pop it in my pocket for a few hours and it's twisted slightly again.
Not sure if this is a real issue, or just normal by design.
Click to expand...
Click to collapse
You realize the phone itself isn't completely flat, right? The camera extends past the rest of the phone case.
If you have your phone in a case, it may also not be completely flat. I have my phone in a Spegin case and the trim around the camera stick out slightly farther than the rest of the case.
Bending the phone so that it lays completely flat may actually be introducing a bend into the phone!