Related
I have Samsung Galaxy S GT-I9000M.
I installed Lagfix and next day the phone stuck on S LOGO and after that Black Screen.
The firmware on my phone was ( UGJH2 ).
I downloaded the firmware from ( samfirmware ) and I flashed the firmware with
odin3 Version 1.3.
After flashing three times successfully the result was same.
Files in this firmware are
1. cache.rfs
2. dbdata.rfs
3. factoryfs.rfs
4. modem.bin
5. param.lfs
6. zimage
I think some files are missing in this firmware. e.g ( primary boot loader boot.bin and sbl Secondary boot loader). And I am not able to update bootloader.
what's the actual situation.
Need Help.
Use Odin One-Click Restore to JF6. That will be a US factory AT&T ROM for 2.1. Then follow this. forum.xda-developers.com/showthread.php?t=803569. Good Luck.
Hey,
I was trying to format/wipe file system from CWM and the device crashed, so i opened ODIN and i inserted a firmware and i got FAIL on <ID:0/007> factoryfs.img
Please can anyone help with this ? I tried going in the recovery mode but i got an error saying open Kies and do recovery but Kies doesn't want to connect.
..
I will try and report here later.
Thanks
Enviado do meu GT-I9500
Found the same guide in other blog. It works fine..
..
Ap0rd said:
It may be the same method, but it's not the same way to say it.
Click to expand...
Click to collapse
U serious?
robertostorm said:
U serious?
Click to expand...
Click to collapse
..
By by knox, you should warning people about knox
Enviado do meu GT-I9505 através de Tapatalk
..
You said may lol, that's why I prevent you. Because not all users do the previous research
Enviado do meu GT-I9505 através de Tapatalk
no SU binary
Hi
I followed your instructions. I"m running i9500ubufna2 Android 4.4.2 S4 I9500 from Sammobile . I flashed Philz Recovery, no problem. I went to Philz settings and clicked on Reroot device.
when i open SuperSU , it says "No SU Binary installed, and SUperSU cannot install it. This is a problem"
what do i do now?
Andre
andreapaid said:
Hi
I followed your instructions. I"m running i9500ubufna2 Android 4.4.2 S4 I9500 from Sammobile . I flashed Philz Recovery, no problem. I went to Philz settings and clicked on Reroot device.
when i open SuperSU , it says "No SU Binary installed, and SUperSU cannot install it. This is a problem"
what do i do now?
Andre
Click to expand...
Click to collapse
Install CFRoot.
Put you phone into Dowload Mode, and flash using Odin.
Enviado do meu GT-I9500
Yes that worked thanks
QUOTE=eric-filth;50878054]Install CFRoot.
Put you phone into Dowload Mode, and flash using Odin.
Enviado do meu GT-I9500[/QUOTE]
Anyone know if this works for AT&T 4.4?
Hi!
I tried that, but a dead Android appears, with "error" and it doesn't enter the philz recovery. It boots normally though. Does anyone know what went wrong?
Tks!
Sent from my GT-I9500 using xda app-developers app
problem
Hi!
I tried that, but a dead Android appears, with "error" and it doesn't enter the philz recovery. It boots normally though. Does anyone know what went wrong?
Ap0rd said:
How to root Galaxy S4 GT-9500 running Android 4.4.2 (KitKat)
Proceed at your own risk, rooting your device may void your warranty and Knox will no longer function
Requirements:
Samsung Galaxy S4 GT-9500 running Android 4.4.2
Kies disabled
Odin 3.09: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
PhilZ Touch 6 Recovery by Phil3759: http://forum.xda-developers.com/showthread.php?t=2201860 (download the .tar.md5 version for the GT-9500)
Make sure that USB debugging is enabled in developer options
Recommended:
Backup your data
Battery charged more than 50%
Rooting your device:
Connect your device to your computer (ID:COM in odin should be highlighted in blue)
Select Philz touch recovery 6 as AP in odin, make sure F.Reset Time and F.Reboot are checked (Do NOT check any other options)
Press the start button
Wait for Odin to finish
Power-off your device and boot into recovery by holding these buttons: Volume up+Home+Power
If Philz recovery doesn't appear, it may take a few tries.
Now enter philz settings and select reroot device.
When your device boots, download SuperSU (by Chainfire) in the play store.
Download Root Checker Basic and Verify your Root.
Done!
Click to expand...
Click to collapse
"KNOX" appears in my settings menu (I have just updated to 4.4.2 today) however, when I select it from the menu there is a message that reads "you need to download and install this app" so that must mean that knox is not yet actually on my s4 at all ?
can you tell me, what is KIES how do you disable it ?
anyone know how to reset avoid knox?
is this ok to use to root my i9500 on 4.4.2 with a mac osx ?
dottech.org/149375/how-to-root-samsung-galaxy-s4-on-android-4-4-2-kitkat-gt-i9500-gt-i9505-guide/
s4 stuck on odin mode in half way
i hv s4 i9500 running on 4.4.2 i tried to root it but it is stuck on odin mode with half progress bar... i tried to use different odin but it still stuck on the same place... and i cant get a normal boot now.... my odin extension are this... please help...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4 <---- IT STUCK AT THIS POINT EVERY TIME
Excellent post
Hello.
After using rom manager the phone wont boot. The only thing that works is the upload mode. I allready downloaded the usb drivers an de odin software, after searching on the internet, but i can't find the files to use with the odin to restore the phone. Does any body knows where can i downlod then.
Thanks.
juancho71 said:
Hello.
After using rom manager the phone wont boot. The only thing that works is the upload mode. I allready downloaded the usb drivers an de odin software, after searching on the internet, but i can't find the files to use with the odin to restore the phone. Does any body knows where can i downlod then.
Thanks.
Click to expand...
Click to collapse
There are 2 ways to install a new rom to your device. Through recovery (ex. CWM) or wth a flasher. Odin is the Samsung flasher and you need a rom image to flash it over your phone. You will lose all your both ways.
I was not able to find in any image of your phone online in order you can flash it with Odin BUT you can install a recovery with Odin and then flash a rom.zip from the recovery...
I found these tutorials that will help you:
How to Install Custom Recovery on the Samsung Galaxy Prevail 2
How to Install a Custom ROM on the Samsung Galaxy Prevail 2
Good luck!
recovery fail
Thanks for taking the time to answer.
I downloaded the recovery and the odin 1.85, but after i clicki start, this is what i get:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
MY CELL IS A SAMSUNG GALAXY S6 MODEL SM-G920i, AND IT'S IN THE INFINITE LOOP AND I CAN NOT ACCESS THE RECOVERY MODE AND EVERY TIME I TRY TO INSTALL THE ORIGINAL ROM BY THE ODIN OF THAT ERROR: <ID: 0/004> Added! !
<ID: 0/004> Odin engine v (ID: 3.1203) ..
<ID: 0/004> File analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
JA GET INSTALLING THE TWR MORE I CAN NOT ACHIEVE MORE BECAUSE OF THAT ERROR: RECOVERY IS NOT SEANDROID ENFORCING, WHEN I RESTART THE APPLIANCE AND LET IT START NORMAL THE ERROR SOME. I DO NOT KNOW WHAT TO DO, HELP ME PLEASE.
Galaxy S6 bootloop
C3RB3RU5X said:
MY CELL IS A SAMSUNG GALAXY S6 MODEL SM-G920i, AND IT'S IN THE INFINITE LOOP AND I CAN NOT ACCESS THE RECOVERY MODE AND EVERY TIME I TRY TO INSTALL THE ORIGINAL ROM BY THE ODIN OF THAT ERROR: <ID: 0/004> Added! !
<ID: 0/004> Odin engine v (ID: 3.1203) ..
<ID: 0/004> File analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
JA GET INSTALLING THE TWR MORE I CAN NOT ACHIEVE MORE BECAUSE OF THAT ERROR: RECOVERY IS NOT SEANDROID ENFORCING, WHEN I RESTART THE APPLIANCE AND LET IT START NORMAL THE ERROR SOME. I DO NOT KNOW WHAT TO DO, HELP ME PLEASE.
Click to expand...
Click to collapse
Hi C3RB3RU5X,
I had the same problem. Whenever I tried to flash the Stock ROM things got worse, until in the end I had the same problem as you.
If you can still access download mode try the following:
download the latest TWRP file for your S6 model
download AOKP image for your S6 model
download GAPPS for your S6 model
enter download mode
flash TWRP with Odin, but un-tick "Auto-Reboot" in Odin
when completed go to recovery at once (don't let the phone try to boot normally, just "kill" phone and hold the buttons for download mode)
when in recovery (TWRP) start ADB software (if you don't know how google samsung galaxy S6 ADB)
transfer the downloaded AOKP image and GAPPS to your phone (/sdcard is a nice place) via ADB
wipe cache in TWRP
install image and GAPPS
wipe cache and reboot your phone
everything should be normal by then
Good luck !
Peter
petrus_muc said:
Hi C3RB3RU5X,
I had the same problem. Whenever I tried to flash the Stock ROM things got worse, until in the end I had the same problem as you.
If you can still access download mode try the following:
download the latest TWRP file for your S6 model
download AOKP image for your S6 model
download GAPPS for your S6 model
enter download mode
flash TWRP with Odin, but un-tick "Auto-Reboot" in Odin
when completed go to recovery at once (don't let the phone try to boot normally, just "kill" phone and hold the buttons for download mode)
when in recovery (TWRP) start ADB software (if you don't know how google samsung galaxy S6 ADB)
transfer the downloaded AOKP image and GAPPS to your phone (/sdcard is a nice place) via ADB
wipe cache in TWRP
install image and GAPPS
wipe cache and reboot your phone
everything should be normal by then
Good luck !
Peter
Click to expand...
Click to collapse
I'm having problems downloading the AOKP image for your S6 model
C3RB3RU5X said:
I'm having problems downloading the AOKP image for your S6 model
Click to expand...
Click to collapse
Did you look at
https://forum.xda-developers.com/galaxy-s6/orig-development/unofficial-aokp-7-1-1-t3550923
Just look for your model (SM-G920x)
petrus_muc said:
Did you look at
https://forum.xda-developers.com/galaxy-s6/orig-development/unofficial-aokp-7-1-1-t3550923
Just look for your model (SM-G920x)
Click to expand...
Click to collapse
has no download link, the link has been removed.
C3RB3RU5X said:
has no download link, the link has been removed.
Click to expand...
Click to collapse
As far as I know there is no specific ROM for the Samsung S6 (not like the stock ROM, e.g SM-G920I), only for Samsung S6 (SM-G920). So you could flash this one. Just inquire if your specific provider in India might have restrictions on unlocked phones.
Name of ROM is aokp_zerofltexx_nougat_unofficial_2018-02-17_1022.zip
Just google, there are a number of download links.
If you search the xda site you will find a page where the download links are listed.
petrus_muc said:
As far as I know there is no specific ROM for the Samsung S6 (not like the stock ROM, e.g SM-G920I), only for Samsung S6 (SM-G920). So you could flash this one. Just inquire if your specific provider in India might have restrictions on unlocked phones.
Name of ROM is aokp_zerofltexx_nougat_unofficial_2018-02-17_1022.zip
Just google, there are a number of download links.
If you search the xda site you will find a page where the download links are listed.
Click to expand...
Click to collapse
thank you she help, but I did not find this list you said, I sent an email to the AOKP facebook community and I'll see if they contact.
I found this topic will it work?
https://forum.xda-developers.com/ga...nt/g92xx-android-o-samsung-galaxy-s6-t3663901
C3RB3RU5X said:
I found this topic will it work?
https://forum.xda-developers.com/ga...nt/g92xx-android-o-samsung-galaxy-s6-t3663901
Click to expand...
Click to collapse
No idea, I didn't try.
But it tokk me 5 mins to find the relevant site (modify search terms !)
https://forum.xda-developers.com/ga...ent/7-1-2-unofficial-aokp-s6-s6-edge-t3746751
Thats where I downloaded the ROM from and it works perfectly till now.
I'm on bootloop too and can't get into TWRP. Did you solve this?
gborfitz said:
I'm on bootloop too and can't get into TWRP. Did you solve this?
Click to expand...
Click to collapse
not
C3RB3RU5X said:
not
Click to expand...
Click to collapse
Well... I can. It's tricky but works. Once you had flashed TWRP (with auto-reboot box unticked) press combination buttons to go to download mode. But here's the trick: Just when screen is off change combination to TWRP and boom...
Just don't let it boot into system before that.
Regards.
petrus_muc said:
Hi C3RB3RU5X,
I had the same problem. Whenever I tried to flash the Stock ROM things got worse, until in the end I had the same problem as you.
If you can still access download mode try the following:
download the latest TWRP file for your S6 model
download AOKP image for your S6 model
download GAPPS for your S6 model
enter download mode
flash TWRP with Odin, but un-tick "Auto-Reboot" in Odin
when completed go to recovery at once (don't let the phone try to boot normally, just "kill" phone and hold the buttons for download mode)
when in recovery (TWRP) start ADB software (if you don't know how google samsung galaxy S6 ADB)
transfer the downloaded AOKP image and GAPPS to your phone (/sdcard is a nice place) via ADB
wipe cache in TWRP
install image and GAPPS
wipe cache and reboot your phone
everything should be normal by then
Good luck !
Peter
Click to expand...
Click to collapse
MY FRIEND FRIEND I TRIED TO DO FOOTSTEPS, DOWNLOADS:
[*] TWRP file for your S6 model
[*] AOKP image for your S6 model
[*] GAPPS for your S6 model
SO THAT THE ERROR IS TIME TO INSTALL THE TWRP, THE ERROR AND THE SAME:
<ID: 0/006> Added !!
<ID: 0/006> Odin engine v (ID: 3.1203) ..
<ID: 0/006> File analysis ..
<ID: 0/006> SetupConnection ..
<ID: 0/006> Initialzation ..
<ID: 0/006> Get PIT for mapping ..
<ID: 0/006> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WITHOUT SPEAKING [FAIL!] THAT APPEARS IN ODIN.
IF YOU KNOW WHAT TO DO HELP ME OR PLEASE.
THE VERSION OF MY Odin3_v3.12.3.
OBSERVATION: TWRP AND RA BE INSTALLED ON BL OR AP?
petrus_muc said:
No idea, I didn't try.
But it tokk me 5 mins to find the relevant site (modify search terms !)
https://forum.xda-developers.com/ga...ent/7-1-2-unofficial-aokp-s6-s6-edge-t3746751
Thats where I downloaded the ROM from and it works perfectly till now.
Click to expand...
Click to collapse
WILL IT WORK ON THE SM-G920i MODEL?
C3RB3RU5X said:
WILL IT WORK ON THE SM-G920i MODEL?
Click to expand...
Click to collapse
It seems you don't like to read instructions !
Otherwise you would have found out by yourself that you have to add the TWRP-3.2.1.0xxx.img.tar to AP !
If you want to be 100% sure that the AOKP image works on your phone model you will have to inquire more deeply.
I can't say for sure.
Dear fellow, I am able to solve the infinite loop error in my samsung s6, installing the original but modified ROM. I am grateful to all who have helped me.
but he still has two errors one is IMEI the 350000000000006/01.
and the other is in recovery, at the end of the recovery mode screen a message appears:
Suported API: 3
# MANUAL MODE #
- Appling Multi-CSC ...
Applied the CSC-code: TTT
Successfully applied multi-CSC.
if anyone can solve this error I will be grateful still.