I have an HTC Inspire 4G.
I am using it for the FIRST time, and for the first time in the Philippines.
It was an AT&T locked phone, so I had to root it to unlock it.
I followed the ace hack kit v9 instructions to get it to root. Everything worked relatively as planned except that installing CM7 resulted in a looping boot screen. I fixed that by clearing the cache, but I wasn't too thrilled with the new look. I didn't try my mobile internet yet at that point (I was on WiFi).
I decided to flash the ClearDroid ROM since I just wanted stock with root.
Everything works great. Except my cellular connection is AMAZINGLY unusably slow. I had to manually enter in the APN settings for the wireless carrier here (Globe), and that was a little bit of a pain in itself. I took the phone to one of the local stores here and they confirmed the settings were correct. Regardless, I CAN connect. It just takes sometimes 5 minutes to load CNN's mobile site, for instance. Android Market times out.
I had an iPhone 3GS here on the same service and same locations, so I know what I should be expecting as far as speeds here.
What could be causing this?
Philippine cell phone providers use 900/1800 bands.
Inspire 4G supports 850/1900
iPhone 3gs supports 850/900/1800/1900 so thats why you got better data speeds.
Im sure the phone shows an E for data connection next to the signal bars.
I do get G next to the signal bars mostly, actually.
Calling and texting works fine also ... is the data connection that much more sensitive to frequency?
Also, this HTC's page says the Inspire supports all bands for GSM and GPRS. (I'm a new user so can't post link)
What are your data speeds with the inspire, and what are they with the iphone?
One thing you may need to do is to edit your build.prop
http://forum.xda-developers.com/showthread.php?t=982082
where can i test my data speeds? using test servers outside of the Philippines will probably not be very accurate.
edit: ok i downloaded the SpeedTest.net app for Android. It seems to have several test servers in the Philippines including one 7 miles away. On WiFi I get 1600k down and 450k up (which sounds about right). On 3G I got 999ms ping and -0k down and -0k up. Note that it actually did "run" through the tests, even though it took a really long time. If I disable my connections it won't actually run through the test and will instead give me an error saying it could not connect to the network.
but i should reiterate again that my connection is EXCEPTIONALLY SLOW. when trying to access the Android market, it seems to time out waiting. when trying to use it as a tethered modem, Windows doesn't see a connection to the Internet. loading google.com takes about 10 seconds to load the text, another 30 seconds just to load the google logo. a page like CNN.com took about 5 minutes just to start to appear. data is getting transfered (i guess that is why the connection doesn't time out), but at a very very very slow speed
i no longer have the iPhone, so I can't test, but as far as overall feel, I could get speeds comparable to what I got in the USA in some areas.
ZippyDan said:
I do get G next to the signal bars mostly, actually.
Calling and texting works fine also ... is the data connection that much more sensitive to frequency?
Also, this HTC's page says the Inspire supports all bands for GSM and GPRS. (I'm a new user so can't post link)
Click to expand...
Click to collapse
G is for GPRS, which has a max top speed around 60kbps down.
ZippyDan said:
where can i test my data speeds? using test servers outside of the Philippines will probably not be very accurate.
Click to expand...
Click to collapse
http://pldt.speedtest.net/
repost1234
kirk123 said:
/pldt.speedtest.net/
Click to expand...
Click to collapse
edit: ok i downloaded the SpeedTest.net app for Android. It seems to have several test servers in the Philippines including one 7 miles away. On WiFi I get 1600k down and 450k up (which sounds about right). On 3G I got 999ms ping and -0k down and -0k up. Note that it actually did "run" through the tests, even though it took a really long time. If I disable my connections it won't actually run through the test and will instead give me an error saying it could not connect to the network.
harlenm said:
G is for GPRS, which has a max top speed around 60kbps down.
Click to expand...
Click to collapse
which should still be WAAAAAY faster than what i'm seeing. this feels like 1kbps
ok it looks like it was something to do with the ROM.
I did a nandroid backup and installed CM7 again. Internet works fine right off the bat without ANY configuration (didn't even have to define my APNs).
The thing is I personally don't like CM and would rather use something closer to stock. With this new info, what changes when installing CM or ClearDroid that would be killing my internet?
ZippyDan said:
ok it looks like it was something to do with the ROM.
I did a nandroid backup and installed CM7 again. Internet works fine right off the bat without ANY configuration (didn't even have to define my APNs).
The thing is I personally don't like CM and would rather use something closer to stock. With this new info, what changes when installing CM or ClearDroid that would be killing my internet?
Click to expand...
Click to collapse
Flash a stock Rom and see what happens. Make sure you do a full wipe. Clear cache and dalvic too.
Sent from my calculator
As it turns out, the CM APN list is over 3 times the size of mine, which would explain why yours would work out of the box. Thank you for the heads up, I'll incorporate their list in the next build, and hopefully it will make everything work for you also!
well, i decided to copy the APN info from CM7. that seems to have fixed my problem...
Hi ZippyDan
I noticed that you wer able to resolve this issue. Im also using an Inspire 4g but cant get 3g. I wonder what u did to resolve it
Related
Hi for all of the Simple Mobile users. I ran into a difficulties trying to get 4G internet on my new LG G2x with gingerbread update. Per Simple mobile website, to make MMS and internet work all you have to do is create a new APN for Simple Mobile in apn settings (http://www.mysimplemobile.com/Support-Center-Phone-Programming.aspx#LG), move the green button to new APN, hit save, reboot your phone and you good to go. However it says there also that you CANNOT modify original T-mobile APN that is already created in the phone.
Now here is the problem with gingerbread update. After you rebooted your phone you can go ahead and use internet but right when you got your first page the green screen coming up with t-mobile customer service info and it says there that there is no connection with your phone, please call the number provided below. You might have luck actually getting on the first page but after that - nothing. What happens is after you start using internet your phone stop reading information from newly created APN and automatically switching back to the original default T-mobile APN. And it doen't matter if you reboot the phone or not, it will still make an automatic switch.
Now after discussing this issue here on the board, with great help from jboxer we came to a solution. Jboxer said nobody done this before so I figured why not try it and it actually worked.
All you need to do is root the phone using these tools:
1. Install Clockwordmod with NVFlash.
http://forum.xda-developers.com/showthread.php?t=1056847
2. root it with this zip
http://forum.xda-developers.com/showthread.php?t=1255214
I am a noob in flashing/rooting the phones but it took me only 20 min. to do this procedure. Right after I root the phone I went to menu - settings - wireless & networks - mobile network settings - access point names - hit on T-mobile APN and now you got the opportunity to modify it! The rest - do exactly what the simple mobile website tells you to do.
Hope this helps!
korenpenza said:
Hi for all of the Simple Mobile users. I ran into a difficulties trying to get 4G internet on my new LG G2x with gingerbread update. Per Simple mobile website, to make MMS and internet work all you have to do is create a new APN for Simple Mobile in apn settings (will post the link later because they are updating their website right now), move the green button to new APN, hit save, reboot your phone and you good to go. However it says there also that you CANNOT modify original T-mobile APN that is already created in the phone.
Now here is the problem with gingerbread update. After you rebooted your phone you can go ahead and use internet but right when you got your first page the green screen coming up with t-mobile customer service info and it says there that there is no connection with your phone, please call the number provided below. You might have luck actually getting on the first page but after that - nothing. What happens is after you start using internet your phone stop reading information from newly created APN and automatically switching back to the original default T-mobile APN. And it doen't matter if you reboot the phone or not, it will still make an automatic switch.
Now after discussing this issue here on the board, with great help from jboxer we came to a solution. Jboxer said nobody done this before so I figured why not try it and it actually worked.
All you need to do is root the phone using these tools:
1. Install Clockwordmod with NVFlash.
http://forum.xda-developers.com/showthread.php?t=1056847
2. root it with this zip
http://forum.xda-developers.com/showthread.php?t=1255214
I am a noob in flashing/rooting the phones but it took me only 20 min. to do this procedure. Right after I root the phone I went to menu - settings - wireless & networks - mobile network settings - access point names - hit on T-mobile APN and now you got the opportunity to modify it! The rest - do exactly what the simple mobile website tells you to do.
Hope this helps!
Click to expand...
Click to collapse
That is not how I said to fix it. Rooting the phone doesn't allow you to modify the default settings. In fact, rooting is not even necessary to do my fix. What I said to do is to flash my file that sets a new default APN for Simple Mobile. Here is the thread below. Sucks to be miquoted so badly.
http://forum.xda-developers.com/showthread.php?t=1271508
jboxer said:
That is not how I said to fix it. Rooting the phone doesn't allow you to modify the default settings.
Click to expand...
Click to collapse
Well, rooting allowed me to modify default settings.
korenpenza said:
Reboot or not reboot, it is still switching to TMO apn. So as far as I understood I have to root the phone first, then edit "apns-conf" file?
Click to expand...
Click to collapse
jboxer said:
Yup. And no guarantee it will work but someone needs to try it so we know.
Click to expand...
Click to collapse
All I did is rooted the phone like you explained here http://forum.xda-developers.com/showthread.php?t=1255214
and I was able to modify original T-mobile APN.
jboxer said:
That is not how I said to fix it. Rooting the phone doesn't allow you to modify the default settings. In fact, rooting is not even necessary to do my fix. What I said to do is to flash my file that sets a new default APN for Simple Mobile. Here is the thread below. Sucks to be miquoted so badly.
http://forum.xda-developers.com/showthread.php?t=1271508
Click to expand...
Click to collapse
lol. Well props for making a flashable fix (best method IMO)
I guess once rooted it allows the settings to stick? Others have had luck with APN managers from the market which backup and write custom APN entries which works.
So the problem is that the APN keeps defaulting to Tmobile and the solution is to somehow edit and Save the default Tmobile APN setting with information that pertains to Simple Mobile so that it sticks.
Glad its fixed either way.
another way to fix it is by going into lg hidden menu
dial 1809#*999#>KR Setting>Set KR Settings
this removes all of the apns including tmo's then u just put in the simple apn nd ur good to go
korenpenza said:
All I did is rooted the phone like you explained here http://forum.xda-developers.com/showthread.php?t=1255214
and I was able to modify original T-mobile APN.
Click to expand...
Click to collapse
Rooting would not make a difference here. All rooting means is that apps can request superuser (root) permissions to make changes to the system, and the app that sets the apn never requests root access so rooting the phone would not do anything here. Simple Mobile users were always able to make a new apn (default apns can never be modified). The problem is when they reboot it goes back to TMO's settings. Have you tried rebooting yet. My fix sets a new default apn for Simple Mobile which can be set and stick throughout rebooting, etc.
Also, as stated in my other thread, my fix DOES NOT require root. It only requires that Clockworkmod Recovery be installed.
Dude,
I have been using SIMPLE MOBILE forever and not had the problem you are speaking of. Just follow the instructions on the SM website. Set up the new apn. When you reboot hold the volume button up while rebooting and you should be set. Could it be you aren't setting up the apn properly?
And on some of the ROMS you can edit the T-Mobile apn.
Sent from my intergalactic space modulator using XDA-app
Speaking of Simple Mobile, do they allow using the Wifi hotspot feature on the G2x? I saw in the company's FAQ that tethering was not allowed on SM phones, but wasn't sure if that covered hotspotting as well.
I have a question for you guys, I just got an unlocked G2x to use on simple mobile that I haven't activated, On t-mobiles site it says it supports for 4G, but on simple mobiles site it says it's only approved for 3g data, my question is do I need to get the 3g $40 plan or $60 4g plan to get the most out of the data on this phone?
Do both plans give you the same volume of data (i.e., 500Mb, 1Gb, etc)? If so, go with the cheaper plan. The systems hardly ever let you get the full speed anyway. In Thailand I only get between 2 to 3Mbps usually and it is plenty fast.
jboxer said:
Do both plans give you the same volume of data (i.e., 500Mb, 1Gb, etc)? If so, go with the cheaper plan. The systems hardly ever let you get the full speed anyway. In Thailand I only get between 2 to 3Mbps usually and it is plenty fast.
Click to expand...
Click to collapse
Sadly simple mobile 3g is really on edge speed and the 4g is on 3g speed.
-----------
sent from my calculator with android
jose makalolot said:
Sadly simple mobile 3g is really on edge speed and the 4g is on 3g speed.
-----------
sent from my calculator with android
Click to expand...
Click to collapse
I have ran into this problem. I recently obtained a G2X and SIMPLE Mobile SIM and account. I paid the $40 for the "3G" connection. However it seems that the speed is throttled to around 118kbps down. So I did some testing and found that forcing the phone to use "2G Only" allowed up to around 160kbps down. This is just insane! I have read where some people on SIMPLE Mobile 3G have been able to get around 1500-3000kbps but have no idea how they manage that. My Optimus V on Virgin Mobile's 3G averages around 600-1000kbps down. That is usable. The SIMPLE Mobile one is just crap. I hate to have to pay more for less, unless you count the unlimited talk in that, but I may be sticking with VM for a bit longer. Any ideas how I can get the speed up on the SM one without paying the $60/month?
kameleon25 said:
I have ran into this problem. I recently obtained a G2X and SIMPLE Mobile SIM and account. I paid the $40 for the "3G" connection. However it seems that the speed is throttled to around 118kbps down. So I did some testing and found that forcing the phone to use "2G Only" allowed up to around 160kbps down. This is just insane! I have read where some people on SIMPLE Mobile 3G have been able to get around 1500-3000kbps but have no idea how they manage that. My Optimus V on Virgin Mobile's 3G averages around 600-1000kbps down. That is usable. The SIMPLE Mobile one is just crap. I hate to have to pay more for less, unless you count the unlimited talk in that, but I may be sticking with VM for a bit longer. Any ideas how I can get the speed up on the SM one without paying the $60/month?
Click to expand...
Click to collapse
Are you able to send mms or sms on 3g on $40. I cant on mine. I need to use 2g only to do that.
Sent from my MB860 using Tapatalk
jose makalolot said:
Are you able to send mms or sms on 3g on $40. I cant on mine. I need to use 2g only to do that.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
I mainly use google voice for my text and such since I ported my number to GV and all. But I just tried sending a picture message to my other phone's actual number from my G2X without google voice and it sent, just took forever. As for sms though it has always worked. This is with my phone showing "4G".
kameleon25 said:
I mainly use google voice for my text and such since I ported my number to GV and all. But I just tried sending a picture message to my other phone's actual number from my G2X without google voice and it sent, just took forever. As for sms though it has always worked. This is with my phone showing "4G".
Click to expand...
Click to collapse
Mine doesn't work since Sunday on 4g icon. It will only work on 2g only. SM said faulty sim. Darn, I need to get a new sim. The only problem is, what if the new is still the same.
-----------
sent from my calculator with android
jose makalolot said:
Mine doesn't work since Sunday on 4g icon. It will only work on 2g only. SM said faulty sim. Darn, I need to get a new sim. The only problem is, what if the new is still the same.
-----------
sent from my calculator with android
Click to expand...
Click to collapse
Be sure not to pay the $12.99 for the SIM directly from SM. Go on amazon and buy one for about $1.99 or if you are a Prime member get the one I did for $2.49 w/ free 2-day shipping. Won't hurt to try with it being that cheap.
jose makalolot said:
Sadly simple mobile 3g is really on edge speed and the 4g is on 3g speed.
-----------
sent from my calculator with android
Click to expand...
Click to collapse
odd.. I just switched to the G2X and bought a new Sim card with 4g.
before I had an LG optimus T with the 3g and always got 3g speeds around 2000kbps
On the 4g with my G2X I get anywhere from 2000 to 5000kbps. The really odd thing is its either 4g or 2g. I'll be sitting at work and it will drop from 4g to 2g.. making me think "wtf happened to 3g"?
Another thing I noticed is the hand off between edge and 3g was much smoother. With the G2x It will often completely drop all connections, data and voice, then pop back up with the different speed.
Jmodix said:
odd.. I just switched to the G2X and bought a new Sim card with 4g.
before I had an LG optimus T with the 3g and always got 3g speeds around 2000kbps
On the 4g with my G2X I get anywhere from 2000 to 5000kbps. The really odd thing is its either 4g or 2g. I'll be sitting at work and it will drop from 4g to 2g.. making me think "wtf happened to 3g"?
Another thing I noticed is the hand off between edge and 3g was much smoother. With the G2x It will often completely drop all connections, data and voice, then pop back up with the different speed.
Click to expand...
Click to collapse
Yeah SM is just stupid slow on "3G". I actually got faster speeds when I forced 2G only network. My wife's Samsung Gravity Smart also has the same speeds as my G2x. I am thinking of switching to the $30/month 5GB of 4G data w/ 100 minutes that T-Mobile offers just to try it out. I can use my GrooveIP to make/receive calls if need be.
this helps alot cuz im about to get simple mobile...thanks!
seangeezy12 said:
this helps alot cuz im about to get simple mobile...thanks!
Click to expand...
Click to collapse
Just be ready for super slow speeds if you don't pay for their "4G" package. I ran some back to back tests yesterday with my SIMPLE Mobile sim and a T-Mobile sim in my G2x.
SM "4G" 118kbps down/ 132kbps up
SM "2G" 159kbps down/ 131kbps up
TM "4G" #1 885kbps down/ 348kbps up
TM "2G" 207kbps down/ 133kbps up
TM "4G" #2 1505kbps down/ 524kbps up
all ran back to back. So even T-Mobile 2G is faster than SM 3G. lol
Hi there,
I'm using Revolution HD 3.6.1 with its radio and relative RIL (which becomes with the rom by default). Obviously I have S-OFFed and rooted.
I'm experiencing some hiccups in 3G data connections. I don't know if it's due to the carrier (Wind Italia) or something in the phone (maybe the radio doesn't support it at all?). I'm in Europe, precisely in Italy.
Maybe should use an european version of radio? Or what?
In detail:
I activate data connection. The phone shows 3G before, and quickly goes in H (HDSPA). Then I use many apps that needs internet connection. Within a short time it goes again in 3G and i have absolutely NO data connections. After a delay of 5-10 sec it goes again in HDSPA and everything works. When it goes again in 3G i have no data, then again H and data working.
What's the problem?
EDIT: Problem solved! See in this post.
P.s.: Sorry for my bad english
I was going to ask about something similar to this, so rather than start a thread I will post it here. I too am running the 3.6.1 with its radio, S-OFF, & rooted.
What I am seeing on boot up is the standard progressive upgrades of data networks (just bars, then 2G, then 3G, finally H). The H only stays for a few seconds then drops to 3G and basically stays like that. However, as soon as I open an internet requiring application, it jumps to show H and typically stays that way as long as a data connection is active. My Speed Test results show its 4G speeds (same as stock ROM and radio) when its showing the H, so obviously its working, I'm just wondering if its intentional that the display only shows 3G? Or maybe its set so the ROM "relaxes" on 3G, but switches to 4G when data is actually being sent/received?
~T.J.
Maybe you used to have a 'background' app updating constantly.
The G, 3G and H usually depends on the signal in your area, the H is usually for high data transfer. If you're not using the internet,downloading anything or updating anything on your phone, then why would you need it on all the time?
3g is usually the norm, so I wouldn't worry!
For my issue, my stock ROM showed me what was available in the areas as I moved around, including showing 4G all the time if I was in a coverage area (which pretty much everywhere around me is). If I moved out of the 4G area for instance, it would drop to show me 3G.
This one just shows 3G all the time, even when I'm in areas I KNOW are 4G; UNTIL I use the data connection, then it switches and shows the H. I know its silly, but I liked actually gauging my providers service by being able to see what kinds of connections were available in various areas.
The fact I have to actually open the browser or run a speed test to see if 4G (H in this case) is available in that area is a little odd to me, why doesn't it just show the connection that's available?
~T.J.
Guys, I found a solution to my problem, googling around. That's awesome.
FYI I'll post here:
1. dial *#*#4636#*#*
2. Go to phone information
3. Toggle ciphering so it's off
4. Turn off radio
5. Turn on radio
6. Toggle ciphering back on
It seems to be working to me. An half hour without hiccups till now.
I have had this problem ever since my hd2 two years ago. I thought it was normal. I'm about to try the fix. If it fixes it you are a life saver.
Sent from my HTC Sensation 4G using XDA App
Aww man same thing. Maybe its supposed to be like this.
Basically for me its for example on the xda app when ill refresh something it will always say processing as soon as the 3g symbol turns to h with both arrows on simutaneously.
Maybe that's how its supposed to be idk.
Sent from my HTC Sensation 4G using XDA App
Glad its not only me!!!! This is a problem. I am in the U.S and i have it also. Ive been trying to figure it out. I have radio 10.15.9035.2_2 and bricked kernel 1.2 i can not figure out if this started happening from when i flashed the lastest radio or when i went with bricked kernel above 0.91 i am still trying to figure it out. *#*# 4636#*#* is only a brief temp fix i know that much. But lets try and put our heads together and get to the bottom of it. Cause its been slowly pissing me off daily. Let me know what you guys hear. And i will keep you updated as well. Please pm me if you here anything on the issue. Thanks!!!!!
Sent from my HTC Sensation Z710e
Xx12thANG3LxX said:
Glad its not only me!!!! This is a problem. I am in the U.S and i have it also. Ive been trying to figure it out. I have radio 10.15.9035.2_2 and bricked kernel 1.2 i can not figure out if this started happening from when i flashed the lastest radio or when i went with bricked kernel above 0.91 i am still trying to figure it out. *#*# 4636#*#* is only a brief temp fix i know that much. But lets try and put our heads together and get to the bottom of it. Cause its been slowly pissing me off daily. Let me know what you guys hear. And i will keep you updated as well. Please pm me if you here anything on the issue. Thanks!!!!!
Sent from my HTC Sensation Z710e
Click to expand...
Click to collapse
Only a brief temp fix? Are you sure?
I'm not having the same problem as before, now. I hope it remains still as it is.
Edit: I'm gonna go talk about this in the Android Revolution thread, so I guess we can stop here. The phone is constantly switching to 3G mode now too, like every time I turn off the screen and turn it on it's in 3G mode, it has never done that, so something is wrong!
Not sure what else to call the thread, lol. Still working on my 10 posts after 1 year (ha) so I can't put this anywhere else.
As of yesterday I had S-Off, CID 11111111, stock Bell Canada ROM. It's been a while since I used the Speedtest.net app, but I'm pretty sure my results would be up to 10 mbps area, sounds about right for a 4G 14.4 mbps phone? I know when I last tested I was not upset at the result.
Last night I installed Android Revolution 6.2.1 XE with 3.6 Sense and Beats Audio.
http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
I have the firmware loaded, and everything went fine, and I can confirm that the recommended radio 11.68.3504.00U_11.21.3504.13_2 is showing in device info.
I searched the thread and found in FAQ that it will not show H+, rather H, and it should still be in 4G mode. But I just did a speedtest.net and can only get about 0.8-2.5 mbps no matter which server I select. I am in Calgary. I also searched and confirmed that I am NOT to select the T-Mobile 4G option from the ROM install menu, which I did not.
Is there any ROM I can quickly revert to that does use the H+ or stock like settings that I can do a speed test and see what normal results are? Or is anyone in Calgary on stock phone can run a rest? ha, not sure where else to go with it, and don't want to undo root and put stock back on.
... but something worries me that I am getting hosed on my download speed. Soemthing makes me think I am not getting 4G.
Any thoughts are appreciated!
Click to expand...
Click to collapse
Additionally, my ping on Speedtest app to the Calgary server, from within Calgary, is ~350ms.
Seems way high, perhaps that's the issue and I need to figure that out first?
orellius said:
Additionally, my ping on Speedtest app to the Calgary server, from within Calgary, is ~350ms.
Seems way high, perhaps that's the issue and I need to figure that out first?
Click to expand...
Click to collapse
not only a problem in your country..
same here in the netherlands (den helder)
Well I just had a friend test his Bell iPhone, I understand they are not 4G or may be on different frequencies or whatever, but same Speedtest.net Calgary server he got 5 mbps down speed and 56 ping, so I'm thinking my 350+ ping is the root of my issue, everything is sluggish. One more post and I can talk about this in the other thread I guess.
Edit: I'm gonna go talk about this in the Android Revolution thread, so I guess we can stop here. The phone is constantly switching to 3G mode now too, like every time I turn off the screen and turn it on it's in 3G mode, it has never done that, so something is wrong!
Hey guys, I haven't done anything to my phone but all of the sudden, the data and phone signal basically quit working. I have a very hard time getting texts, phone calls etc to go though but it will eventually (usually takes a while or a few tries) and as far as data goes, I basically have no connectivity at all unless I'm on wifi. It says 3g or H every once in a while, but it's really slow and usually doesn't stay for long. I'm running CM9, and like I said before I didn't change anything that I'm aware of that would have caused this problem. It worked fine before, and it just stopped. Ideas? Thanks
iamtheculprit said:
Hey guys, I haven't done anything to my phone but all of the sudden, the data and phone signal basically quit working. I have a very hard time getting texts, phone calls etc to go though but it will eventually (usually takes a while or a few tries) and as far as data goes, I basically have no connectivity at all unless I'm on wifi. It says 3g or H every once in a while, but it's really slow and usually doesn't stay for long. I'm running CM9, and like I said before I didn't change anything that I'm aware of that would have caused this problem. It worked fine before, and it just stopped. Ideas? Thanks
Click to expand...
Click to collapse
have you called your provider? maybe its on their end.
I'm having the same exact problem... it shows my 3g it shows all my bars but instead of the bars being colored or the 3g be in color is gray. Also I cannot get back conectivity until I restart the phone. Does anybody have an idea what this is?
Are you on AT&T? I was not having any problems until a certain point in time, and I didn't change or do anything to incite them. I'm not even getting calls anymore, I'll just get all my texts in a wave every few hours. My data is useless, it won't stream, or load web pages, and my phone is frequently saying "Emergency calls only" when I'm sitting at my freaking house (which normally has full 3g and cell signal and is very fast)
This just started occuring with my 9020a on AT&T the first week of March. I switched SIM cards twice, spent about an hour on the phone with ATT, and sent the device back to Samsung who rolled back the software to 2.3.4 and the Radio to UKE1.
I still have the issue. Samsung says its not them. ATT does nothing. It;s liek the phone just stopped working, started dropped calls, missing calls, and the internet connection sucks. I have an iphone for work through ATT as well and have no issues with signal.
ANy help is appreciated.
Hmm
Make sure you have the right, most up to date settings for APN, and flash original radios. if it still doesn't work, make sure you have the i9020A, which has the at&t 3g antenna, not i9020T which has the T-Mobile antenna, vice versa.
Have you tried other radios for your device (make sure you flash the appropriate ones for your model)? Any signal info under Phone Information when dialing *#*#4636#*#*?
ChemicalD said:
This just started occuring with my 9020a on AT&T the first week of March. I switched SIM cards twice, spent about an hour on the phone with ATT, and sent the device back to Samsung who rolled back the software to 2.3.4 and the Radio to UKE1.
I still have the issue. Samsung says its not them. ATT does nothing. It;s liek the phone just stopped working, started dropped calls, missing calls, and the internet connection sucks. I have an iphone for work through ATT as well and have no issues with signal.
ANy help is appreciated.
Click to expand...
Click to collapse
Sounds like you're having the exact same problem I am having. I switched sim cards, flashed different roms, etc and nothing. (although to be fair, after the new sim, things work better, but still not well) I'm about ready to pop my sim back in my craptivate and just go with that... or buy an iphone off of craigslist.
Billchen0014 said:
Make sure you have the right, most up to date settings for APN, and flash original radios. if it still doesn't work, make sure you have the i9020A, which has the at&t 3g antenna, not i9020T which has the T-Mobile antenna, vice versa.
Click to expand...
Click to collapse
I am 100% sure I have the 9020a, but I don't know anything about APN and flashing radios. I have only ever flashed full roms before, so I wouldn't know where to look for the original radio.
Oogway13 said:
Have you tried other radios for your device (make sure you flash the appropriate ones for your model)? Any signal info under Phone Information when dialing *#*#4636#*#*?
Click to expand...
Click to collapse
I have not tried other radios. The signal info seems solid, sitting at my house, but the 3g is still horridly slow. It taked 15-30 seconds to load a webpage, even a pretty mundane one like google. Messages still come through in waves, and often won't send
About your APN, AT&T should provide you with the proper values to put in under Settings | Wireless & Network | More | Mobile Networks | Access Points Names.
If you are on ICS, they values should populate by themselves.
Can you try flashing other radios and see if you encounter the same problem:
http://forum.xda-developers.com/showthread.php?t=1116884
Make sure you backup your EFS folder (and all data for that matter).
I had similar problems, they were related to turning 3g on/off with a APN widget while the phone had little signal. As soon as started enabling and disabling 3g on the android options everything was back normal.
alexfiorani said:
I had similar problems, they were related to turning 3g on/off with a APN widget while the phone had little signal. As soon as started enabling and disabling 3g on the android options everything was back normal.
Click to expand...
Click to collapse
the data works most of the time now it's just retardedly slow. I can't stream music even on low quality, nor can I watch youtube without leaving it for 5 minutes to buffer,pages take forever to load, and I was downloading a 6 meg app and it took 20 minutes to download whenI was leaving the phone alone and not moving. I got really sick of trying to fix it and finally gave it to geeksquad to send in to get replaced. sigh.
I have been having this problem with both of my Nexus S 4G ever since I got them 2 months ago.
My data drops out frequently and takes a while to get back up. If I have 4G enabled, then I have to manually reconnect it as it will not do it on it's own. This happens inside AND outside. Driving down the road or just standing in one spot.
I've tried all of the radios (basebands) and about 7 different ROMs and versions.
I've refreshed the data profile, PRL, and even tried the roaming Verizon PRL and Hybrid PRL.
Gone back to stock and tried everything from scratch. Still the same problem.
Dallas/Fort Worth Area
Network: Sprint
Baseband: D720SPRKE1
PRL Version: P:40447
I contacted Sprint and they just told me to update the profile & PRL.....
Any suggestions?
I'm not familiar with the CDMA nexus s, but are you able to change APN's? At one point I'd be able to connect to 3g (I have an I9020A), but every minute or so it would drop, so I fixed up the APN's for my carrier.
iv had a few data issues
forcing PRL and account updates has fixed it a couple of times
i'v bought used phones that iv had
to have sprint force update
im on LC1
[altho i cant tell any significant difference here]
and my prl is 61086
[a business account]
im currently on slim
make sure your mobile network
is set to roam
is not set to home only
Am I the only one with this problem? As I'm typing this I lost data but still had 3 bars. I never drop calls but only data.
Help please. This is driving me nuts.
Sent from my Nexus S 4G using xda premium
andrewddickey said:
Am I the only one with this problem?
Click to expand...
Click to collapse
no
i go thru periods of it acting bizarre
try disabling wifi and reboot
this USUALLY fixes mine till wifi is re-enabled
and i drop the sprint connection a few times
riding around
it then fails to re-acquire the IP address.
look in your status and see if you still have an IP
when your data fails
fwiw
I never use Wi-Fi. Ever.
Happens while using both 3G and 4G.
Sent from my Nexus S 4G using xda premium
4G is worthless here...
i dont even bother with the switch
does it do the same thing if you disable 4G?
I almost always have to use 4G (if possible) since 3G speeds are slower than dial-up.
I've tried rebooting and leaving 4G off, and still the same. Even tried going back to Gingerbread.
Sent from my Nexus S 4G using xda premium
andrewddickey said:
I almost always have to use 4G (if possible) since 3G speeds are slower than dial-up.
I've tried rebooting and leaving 4G off, and still the same. Even tried going back to Gingerbread.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
If going back to GB doesnt help, maybe it is hardware related?
---===:::Greetzz, jojoost:::===---
Sent from my iPad using Tapatalk HD
This is happening with BOTH of my NS4G.
Possibility that BOTH have hardware defects?
Do a profile and prl update
Hit the thanks button if i helped
R0M CHEF said:
Do a profile and prl update
Hit the thanks button if i helped
Click to expand...
Click to collapse
In the original post, I stated that was one of the things I've done.
have you checked to see if you have an IP address
when data fails?
mine shows "unavailable" when it's wonky
and wont re-aquire till i reboot.
i'v seen this on 2 phones
off and on including on oem 2.3.7
fwiw
andrewddickey said:
Am I the only one with this problem?
Click to expand...
Click to collapse
I have the same problems. From what I understand, its a problem with the hardware. I can confirm that's probably the case, because I've tried many different ROMs (stock, cm, etc...) and they all have the same radio issues (3g/4g and wifi)...
I have an NS4G in the DFW area and haven't seen the issues you're reporting. I'm currently on 4.0.4 with D720SPRLC1 baseband. Maybe I'm just lucky and have a good signal at work and home. It's very rare that I find an area of DFW where I don't get any data signal at all. Not sure what to suggest.
I get random drops too and i hate it. My 3g speeds are fairly good even above 1 mbps. Highest i ever got on 3g was 1.51 mbps
Mine will lose data if I'm in a coverage free area for an extended period of time, when I'm back in range 3g icon will show up just never reconnect. A reboot fixes it
Certain Areas
There are certain areas where I live that data just disappears. Although this is just a network thing I believe. It's weird though when I am driving it's like a 10 second drop and then all is good. Hope you get a solid fix!:victory:
Backup 4g Partition
REMOVED - was a bad idea.
I've actually replaced BOTH of the phones with brand new NS4Gs and they shipped with ICS.
Still the same problem.
This is driving me nuts. I was driving and trying to download Maps for the new phone from the Play Store and it took 6 tries. Kept saying RETRY.
What I've come to believe is happening is:
When 4G connects, 3G disconnects. When 4G drops (which is does frequently), 3G has to reconnect.
***Is there a way to keep 3G "on" in the background while 4G is connected?*** Maybe a way for the radio to transition back and forth?