Related
Hey Everyone,
Im new to android, and having a small issue, I am attempting to root my wifi xoom, I get up to the part where its time to select android recovery so that I can select the root zip, however when I use the volume down key to scroll the options the only 3 available are NVflash, RSD and Fastboot, theres no android recovery option I have searched the forums and googled it, but I seem to be the only one with this issue, my xoom is running 3.1 and bought in Aus, dont know if this makes a difference? any help would be greatly appreciated, I have got an OTG cable and would like to mount my external HDD so I need to get it rooted. Should probably mention I have unlocked it too.
Cheers
ha i just posted a thread with exactly the same issue. Hopefully one of us will get an answer!
djleez82 said:
ha i just posted a thread with exactly the same issue. Hopefully one of us will get an answer!
Click to expand...
Click to collapse
Your post was already answered in the General section. No need to post twice.
The answer did not fix my problem however. Still stuck at the same place as before just like terreboo. Possibly theres an issue with this type of xoom? I bought mine in australia as well. According to my about tablet info it says this:
Firmware Configuration Version: GAS_ASIA_UCAHUBLWFRTIRD_P006 so im assuming this is an asian tab? Just wondering terreboo what does yours say under firmware configuration?
yeah sorry didnt mean to post it in the general section, I alerted it to the mods to delete they just havent got around to it yet, yeah mate I have the same version as you, although I doubt this is the reason, we cant be the only two in Aus trying to root them? I think the problem probably lies else where, it has been suggested I'm getting the timing wrong, so I'll try again and post back my progress or lack of.
---------- Post added at 10:01 PM ---------- Previous post was at 09:45 PM ----------
I have tried it 10+ times now, I'm confident its not the timing of pressing the down key on reboot having varied the length of time everytime I tried, possibly its because of the firmware version? Im at a loss, I have followed the instructions of the root guide to the letter and seem to be one of the only ones with this problem!
this is the guide im using
http://forum.xda-developers.com/showthread.php?t=1078019
Same problem here!
I have the same problem guys.. Any solution?? The developers some help??
Im using the same guide btw....
I've freaked out im trying this for 8 hours now and no results....
im having a similar problem that my factory reset is corrupt or something because it doesnt actually DO anything.
I did the long root method as opposed to the supposedly easier method and thank heavens I got through it unharmed. I was ****ting my pants the whole way through. I wish I were more savvy with this so I can offer help. If I were u guys I would PM the devs from TIAMAT. They are probably the most knowledgeable ppl here to ask.
solution
OK guys i have a solution a guy from #xoom channel told me to write in windows command line
abd recovery reboot
And it worked!
I'm currently posting this from my costum rommed xoom
DrGreem said:
OK guys i have a solution a guy from #xoom channel told me to write in windows command line
abd recovery reboot
And it worked!
I'm currently posting this from my costum rommed xoom
Click to expand...
Click to collapse
Would that be adb recovery reboot? Can you give more information?
assuming you have adb setup on your computer already. Plug your xoom into your comp and make sure its in debug mode. Settings-applications-development. Open a command prompt and type in "adb reboot recovery" without quotes. Your device will then reboot into recovery mode.
I will say I'm having the same issue. I flash the new recovery and I don't see it in the menu. I'm running a US wifi xoom.
okantomi said:
Would that be adb recovery reboot? Can you give more information?
Click to expand...
Click to collapse
Yes that's right. I followed the guide and i waited 3 seconds but i never had the option 'android recovery so i turned on the device and this guy told me to run this command from cmd.
So after that xoom rebooted into clockwork recovery state and i flashed thecostum rom.
According to the guide that were using, if you allow the xoom to boot fully into honeycomb it reinstalls the stock recovery, and you need to redo the process all over. Also, you need to be in honeycomb to use the ADB command, if your in fastboot it won't detect the xoom. This did not work for me. Anyone else try it?
no luck for me here either. I can flash recovery successfully (according to the prompt) no problems there. I just have the exact same trouble booting into it as above.
Vol Down key combo doesn't work and if you leave the OS to boot straight after install, CWM is replaced by stock recovery. No fun at all.
Any further news or suggestions on this?
autodc5 said:
im having a similar problem that my factory reset is corrupt or something because it doesnt actually DO anything.
Click to expand...
Click to collapse
Same as my Xoom, opened a thread just for it, but no one can help
much easier... download rom manager and click boot to recovery haha ...
If not rooted,
adb reboot recovery via a cmdline window works a treat _
fkofilee said:
much easier... download rom manager and click boot to recovery haha ...
If not rooted,
adb reboot recovery via a cmdline window works a treat _
Click to expand...
Click to collapse
Just make sure that Rom Manager doesn't trick you into flashing a non-compatible updated recovery version.
In my experience it doesn't play well with the Xoom.
If all you want is a non manual way to boot into recovery from the OS, download Quick Boot (if rooted) or if you're already on the Tiamat Moray Rom, it's something you can choose when you press the power button on the back.
the problem is that for me and others with this issue, you can't use adb to boot recovery. If you install recovery from fastboot then boot into the regular OS without booting to recovery and rooting, the OS replaces CWM with the stock recovery. This means if you use adb or another app to reboot into recovery, you just get stock recovery which is totally useless. I can't load recovery or root using anay of the universal methods I have come accross. We need a way to boot into recovery without having it replaced with stock or another rooting method or something. Any other ideas?
aussiechris said:
the problem is that for me and others with this issue, you can't use adb to boot recovery. If you install recovery from fastboot then boot into the regular OS without booting to recovery and rooting, the OS replaces CWM with the stock recovery. This means if you use adb or another app to reboot into recovery, you just get stock recovery which is totally useless. I can't load recovery or root using anay of the universal methods I have come accross. We need a way to boot into recovery without having it replaced with stock or another rooting method or something. Any other ideas?
Click to expand...
Click to collapse
Look, this is how I had to flash CWM image file- through adb,/fastboot just like you. No matter what you say, it comes down to a question of timing.
I'm not sure about everyone else with the no recovery option, but timing just isnt the issue for me. Without a lie i've tried to enter recovery over 50 times at various points, 95% of those attempts were at the 3 second mark that is stated in the xda guide we've been using. I'm aware of one other person here whos tried it MUCH more than me with exactly the same result.
However theres one thing that we could narrow it down with. Thus far the people having this issue are using the asian firmware xoom's. Could everyone else having this problem on this thread say whether or not theyre using the asian firmware too? Maybe the asian firmware can't be rooted this way?
I've got a D2G with Clockwork and Bootstrapper installed.
I tried to flash a version of CM7 (http://download.cyanogenmod.com/get/update-cm-7.1.0-DROID2WE-signed.zip), but I'm stuck at the 'M' logo. I used RSDLite 4.9 to root the phone, so I know I have the drivers installed, but now, I can't get my PC to recognize the phone to sbf.
I tried installing RSD5.0, but no dice. I tried deleting the data/cache from the bootloader, tried reinstalling CM7, but nothing. I have a back up image on my SD card, but it doesn't do me any good.
Any help is appreciated. I'm not sure what I can do.
RSDLite cannot be used to “root”. It's a tool that allows you to flash the factory flash image.
Have you entered the SBF loader? http://droid.koumakan.jp/wiki/SBF has instructions for this. You must boot the phone into the SBF loader for RSDLite to detect it.
The link to CM7 you posted above is most probably the Froyo build (for the old Froyo kernel of 2.4.x firmware) and won't work with the kernel from 4.5.x firmware.
Yea, sorry, I misspoke.. i rooted with 'Pete's Motorola Tools 1.06'.
I've got DROID2WE_X6_2.4.29_FULL.sbf, but I think I know my issue. I initially flashed to DROID2WE_X6_2.4.29_FULL.sbf to receive and install the new VZ OTA update of Gingerbread... I didn't flash back to Froyo before installing CM7 (I found instructions to do so AFTER I did the CM7 install attempt), which narsed the whole thing up.
So now, I can't get RSD to recognize the phone and no matter what I do with bootloader, it doesn't get past the 'M' logo.
Am I just **** out of luck? The phone is still under warranty, so I can get a replacement from VZ if I need to.
Do you mean that pulling battery and then pressing and holding power/lock button + up arrow key doesn't take you to SBF loader?
ugg. Yea, that worked. I feel like a total n00b now. I was pressing 'M' to run the factory reset, which of course wouldn't work.
I honestly wish there was a easily accessible wiki with RSD, flashing ROMs and rooting; the info is available in various locations, but some are missing info that others have, so it can be confusing to novices like myself.
Well, the link I posted describes how to boot into SBF loader. It also has instructions for CWM and stock recovery. Along with some info on CM7 installation.
I didn't bother to write an article on rooting yet, though.
Hey Everyone
I've done quite a bit of reading and nothing seems to quite fit the issue I am having so I thought I'd post and seek help.
Some background info...I've unlocked the bootloader and also generated the NVFlash files when I first bought the tablet. It was running the stock ICS Rom. I had CWM Recovery and it was rooted.
I wanted to try a new ROM called BlueAndroid as I read it was really good. I followed all of the instructions and flashed from the sdcard. It appeared successful but when I went to restart the system, it kept boot looping at the ASUS Screen. Then I thought I'd just go back to what I had before by restoring it from CWM Recovery but to my surprise, it didn't work and now it isn't even looping, just stuck on the ASUS Screen.
I tried to fastboot CWM and TeamWin Recovery. Although they were both successful writes to the tablet, they won't load. I can only get to the fastboot screen where it shows the 'wipe data' and 'USB icon'. There used to be an Android Robot icon too but it is gone now.
I even tried to NVFlash. It worked but I'm still stuck on Asus Screen.
Lastly, when I select wipe data, it erases and the Team WIN logo appears for a split second and then it goes back to Asus Screen.
I keep reading something about the possibility of incorrect partitions but I have no idea what that means.
Any help would be greatly appreciated.
Thanks
A
P.S. In the meantime, is there any way to shut the tablet off? I've tried holding the power button down but it just reboots.
Solved: Used blobunpack to get bootloader files from the stock ICS ROM (blobunpack the blob file from the ROM). Then used NVFlash to download those files to tablet. Hope this helps others with same problem. I can elaborate more tomorrow...it is really late and very sleepy but relieved!
xxboarderxx said:
Hey Everyone
I've done quite a bit of reading and nothing seems to quite fit the issue I am having so I thought I'd post and seek help.
Some background info...I've unlocked the bootloader and also generated the NVFlash files when I first bought the tablet. It was running the stock ICS Rom. I had CWM Recovery and it was rooted.
I wanted to try a new ROM called BlueAndroid as I read it was really good. I followed all of the instructions and flashed from the sdcard. It appeared successful but when I went to restart the system, it kept boot looping at the ASUS Screen. Then I thought I'd just go back to what I had before by restoring it from CWM Recovery but to my surprise, it didn't work and now it isn't even looping, just stuck on the ASUS Screen.
I tried to fastboot CWM and TeamWin Recovery. Although they were both successful writes to the tablet, they won't load. I can only get to the fastboot screen where it shows the 'wipe data' and 'USB icon'. There used to be an Android Robot icon too but it is gone now.
I even tried to NVFlash. It worked but I'm still stuck on Asus Screen.
Lastly, when I select wipe data, it erases and the Team WIN logo appears for a split second and then it goes back to Asus Screen.
I keep reading something about the possibility of incorrect partitions but I have no idea what that means.
Any help would be greatly appreciated.
Thanks
A
P.S. In the meantime, is there any way to shut the tablet off? I've tried holding the power button down but it just reboots.
Solved: Used blobunpack to get bootloader files from the stock ICS ROM (blobunpack the blob file from the ROM). Then used NVFlash to download those files to tablet. Hope this helps others with same problem. I can elaborate more tomorrow...it is really late and very sleepy but relieved!
Click to expand...
Click to collapse
I had the same problem. I think it is bricked. I called ASUS, told them it was unlocked, they told me to ship it to them and they would fix it. I boxed it up, and shipped it off. Could not turn it off. Hope the box did not catch on fire.
OP, where were you a week ago when I "bricked" my tablet?
I had the -exact- same issue, btw, although with different circumstances. I can verify with 100% confidence that using NVFlash successfully restores the ICS bootloader. How I understand our situation is that when you tried to flash a ROM or anything based on JB over an ICS-device, it confuses things and causes issues. So you basically have to restore the ICS bootloader to get any progress.
But you hit the nail on the head describing my problem, although I would have ended up typing a dissertation to get across the same information you did. So touche on that
I used the same steps, as well. I blob unpacked my ICS stock firmware (.29 version from ASUS website). I used the boot.blob from my NVFlash files, along with the files I unpacked from the stock blob and flashed them over NVflash.
After a week of a useless tablet, I'm up and running.
I'm going to write a guide about my experience for anyone else and I would welcome your input sir.
I think you could mean a kind of recovery loop: There is a file called "command" on the cache partition which causes the recovery image to boot. But if the recovery is broken then it will not empty cache. The recovery will boot but does not update screen (showing just boot splash). On the next time it will boot again ...
Please be just carefully: "wipe data" in the fastboot menu will create the "command" file.
ScottBroker said:
I had the same problem. I think it is bricked. I called ASUS, told them it was unlocked, they told me to ship it to them and they would fix it. I boxed it up, and shipped it off. Could not turn it off. Hope the box did not catch on fire.
Click to expand...
Click to collapse
Sorry...if I could have made this attempt last week, I may have been able to help you then. :sly:
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
opethfan89 said:
OP, where were you a week ago when I "bricked" my tablet?
I had the -exact- same issue, btw, although with different circumstances. I can verify with 100% confidence that using NVFlash successfully restores the ICS bootloader. How I understand our situation is that when you tried to flash a ROM or anything based on JB over an ICS-device, it confuses things and causes issues. So you basically have to restore the ICS bootloader to get any progress.
But you hit the nail on the head describing my problem, although I would have ended up typing a dissertation to get across the same information you did. So touche on that
I used the same steps, as well. I blob unpacked my ICS stock firmware (.29 version from ASUS website). I used the boot.blob from my NVFlash files, along with the files I unpacked from the stock blob and flashed them over NVflash.
After a week of a useless tablet, I'm up and running.
I'm going to write a guide about my experience for anyone else and I would welcome your input sir.
Click to expand...
Click to collapse
Well, I'm sure you learned a lot during your experience of trying to get it working again - I know I did so that's a +1. I wasn't worried that my tablet was bricked because I was told that if I had the NVFLASH files, I could recover from anything save dropping it and breaking it that way. I was also able to connect to the PC using fastboot and adb so that was another positive.
If you write a guide, that would be great as while I was trying to piecemeal information together to get my tablet running again, there seemed to be dozens of people out there with a similar problem and being unable to get it working again and having to send it off to Asus. Would probably be a great contribution.
The one thing I learned though this ordeal is that the stock bootloader needs to be the same as the custom ROM before installing. I wish ROM guides would tell you this REALLY important fact...
Cheers
A
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
xxboarderxx said:
Well, I'm sure you learned a lot during your experience of trying to get it working again - I know I did so that's a +1. I wasn't worried that my tablet was bricked because I was told that if I had the NVFLASH files, I could recover from anything save dropping it and breaking it that way. I was also able to connect to the PC using fastboot and adb so that was another positive.
If you write a guide, that would be great as while I was trying to piecemeal information together to get my tablet running again, there seemed to be dozens of people out there with a similar problem and being unable to get it working again and having to send it off to Asus. Would probably be a great contribution.
The one thing I learned though this ordeal is that the stock bootloader needs to be the same as the custom ROM before installing. I wish ROM guides would tell you this REALLY important fact...
Cheers
A
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Really? I didn't know that....that might explain why none of the ROM's I'm flashing will work.....
At this point, I'm just going to upgrade to the stock JB firmware and flash the new JB roms. I've got my NVFlash ICS files (which saved my frickin life) so I have no hesitations about doing anything, and I really understand the NVFlash process well having bricked myself so hard.
My guide is mostly done. I spent more time writing it than I did focusing on schoolwork so I will finish it up hopefully this weekend. It's rather long and quite details so I hope it will help everyone.
I was smiling as I read the first post, but this is going to come in real handy if I nuke my bootloader. Thanks. I wish I had gotten to this first, heh, I could have told you don't flash a Jellybean ROM over an ICS bootloader, it won't boot.
Good information to have though. Thank you!
opethfan89 said:
Really? I didn't know that....that might explain why none of the ROM's I'm flashing will work.....
At this point, I'm just going to upgrade to the stock JB firmware and flash the new JB roms. I've got my NVFlash ICS files (which saved my frickin life) so I have no hesitations about doing anything, and I really understand the NVFlash process well having bricked myself so hard.
My guide is mostly done. I spent more time writing it than I did focusing on schoolwork so I will finish it up hopefully this weekend. It's rather long and quite details so I hope it will help everyone.
Click to expand...
Click to collapse
:good:
Just giving some advice to those who may jump in late, DO NOT use the "wipe data" method from holding volume down. This method relies on Asus' stock recovery image. And it somehow screws everything up when you do it on a non Asus' recovery.. Not sure why but dont ever use that
elesbb said:
Just giving some advice to those who may jump in late, DO NOT use the "wipe data" method from holding volume down. This method relies on Asus' stock recovery image. And it somehow screws everything up when you do it on a non Asus' recovery.. Not sure why but dont ever use that
Click to expand...
Click to collapse
You can do it if you have a custom recovery already flashed like TWRP or CWM. But I agree with you - after you start having a basic understanding of Android customization, there's no reason why you would want to use 'wipe data' from the volume down+power.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
elesbb said:
Just giving some advice to those who may jump in late, DO NOT use the "wipe data" method from holding volume down. This method relies on Asus' stock recovery image. And it somehow screws everything up when you do it on a non Asus' recovery.. Not sure why but dont ever use that
Click to expand...
Click to collapse
That finally explains why it wouldn't work, thank you for elaborating on that!!
Is there a guide on how to get the stock recovery back, or does it automatically get flashed when you flash stock?
opethfan89 said:
That finally explains why it wouldn't work, thank you for elaborating on that!!
Is there a guide on how to get the stock recovery back, or does it automatically get flashed when you flash stock?
Click to expand...
Click to collapse
Automatically gets flashed when you flash stock.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
If you are in recovery loop you cannot go into the fastboot menu. The only way to get the stock recovery back is to use nvflash.
So it had been quite some time since I tried messing with my tf300 so....
I was on cm-9, when to update to cm-10.1, tried to update twrp then it wouldn't boot to recovery, tried to flash back to stock JB bootloader using "fastboot flash system.blob" gave me a flash error (invalid size) and for some reason fastboot doesnt recognize my device.
So I have no recovery and no rom.
I tried "fastboot boot boot.blob" from cm-9 and cm-10 and it wont boot. just stuck on "waiting for device"
When I type "fastboot devices" it just starts a new command line, no serial number.
I can include any information needed to help my situation, I just need to be told where to look.
To be honest, I couldn't remember what bootloader I was on. It had been a while. Is there a way to tell?
Can't get the tablet to stay off either while I wait for help. Lol
Sent from my LG-LS970 using xda premium
Any ideas?
Sent from my LG-LS970 using xda premium
Now I think my situation might have gotten worse.
I can't get into fastboot now. It just keeps trying to go into recovery mode but there is no recovery so it just continuously reboots.
No one can help?
Sent from my LG-LS970 using xda premium
Well that sucks...
Sent from my LG-LS970 using xda premium
Depends on what you were trying to do, were you trying to update the recovery first and to what version. I believe cm 9 is based on an older build of bootloader. What exactly did you do. From my knowladge as to reading and seeing so many people just flashing before reading the threads you should first update the bootloader then the recovery depending on what recovery version you were trying to update to. From what it sound like you tried to update the recovery before bootloader just not sure what version of recovery but if wrong one and didnt update bootloader sounds like you maybe un recoverably bricked like what everyone else is doing before reading and as of now. Aslo if you have an nvflash backup there may be a fix i'm just not sure how as i never had it but accorging to some it seems that was the only hope for them to get out. Reaad the threads there maybe help on here some where just so many are flashing and bricking before reading people are getting frustrated because theres no help for it.
I know it doesn't help, but since you wanted to know what happened, I can tell you that much. Since you were on CM9, you had to be on the original ICS bootloader. Stock JB can't be fastboot-flashed over ICS because of changes to the partitioning and other low-level stuff, which is why it wouldn't flash and why it subsequently failed to boot.
I'm also just picking up my TF300 for the first time since August. I just recovered from a soft-brick today (my story, which in hindsight was a complete f-up on my part), which was why I hadn't been using it. I ended up fastboot-flashing the newest ICS firmware (I actually tried it back in August, but fastboot wouldn't work; I didn't do anything differently today, but fastboot had been updated recently and magically worked), then performing the NVFlash backups from the sticky thread (this isn't quite where our paths diverged, but it may have been a good idea to do that before you tried upgrading to JB -- not that it helps now, but for future reference).
Like you, I tried fastboot-flashing the stock JB firmware over the ICS firmware and got the same error you got. So, I tried flashing the ICS firmware again, but got the same Invalid Size error. At this point, my tablet wouldn't boot past the splash screen (not the animation with the spinner; the first one with the NVidea logo in the corner), and fastboot wouldn't flash any firmware.
This next part is the part where our stories more-or-less fork.
Faced with another soft brick just hours after fixing one, I fastboot-flashed TWRP instead (made sure to use an ICS version since the JB firmware didn't flash, and the NVFlash bootloader I had was based on the ICS bootloader), which worked, and I booted into recovery. I used TWRP to flash the ICS firmware (I actually had it on my internal SD card in August, but I could have also pushed it with ADB if I didn't already have it), and I got a functioning tablet again.
Next, to upgrade to Jellybean correctly, I booted into Android and used ADB to push the Jellybean firmware to my tablet. I put it on the root of the internal storage, and the tablet saw it and alerted me to the update. Since TWRP had been replaced by the stock recovery when I flashed the ICS firmware, I just let the tablet do its thing with the update, and I ended up with a perfectly-functioning stock Jellybean ROM. I then performed each subsequent update (I never once skipped any update steps) the same way until I was on the newest 4.1.1 firmware (I'm not updating to 4.2.1 until CM10.1 works with it).
I'm not sure how much research you did before you updated your tablet, but I was trolling the TF300 forums for a good 2 or 3 hours before I even tried upgrading, and I still had trouble (I never saw any posts about people trying to fastboot-flash JB over ICS, so I didn't know it wouldn't work until I tried it at least 3 times). From the limited details you provided, it doesn't sound like you did much searching before you started flashing. In the future, it may be a good idea to research a lot more than you think you have to before flashing things on expensive devices.
Also, in the future, when you're asking for help like this, it's best to go overboard on the details - just like a murder investigation, we want to help you figure out what killed your tablet, but we can't do that if you don't tell us about the strange footprints you saw in your neighbor's lawn the night before. Mention every single icon or word that appears on the tablet, every single button-press you've made, every keystroke you've typed, etc., whether it seems important or not. We can't be there with you, so you have to bring your situation to us.
At this point, the only advice I can give is to let the tablet die, charge it again (so the battery's full but the tablet's powered off), and try again when the battery's full. If you can get ADB to work while the tablet is trying to boot recovery, you may be able to flash a new recovery and then try flashing the ICS firmware (flashing the JB firmware might work, but then you can't use NVFlash). That's about the best you can do if you can't get it into fastboot mode (short of RMAing your tablet). If you can get fastboot to work somehow, then you can easily flash a new recovery and follow the steps I took. But if you do get your tablet booting with the ICS firmware, perform the NVFlash backups ASAP before you update to Jellybean.
I hope you can get your tablet to work. I thought mine was a goner until I got lucky with an updated fastboot. Now, I'm ecstatic that it works, and I'm going to be a lot more careful in the future.
Was trying to get ready to resell my Xoom after I got a USCC Galaxy Note 10.1.
I ran a factory reset, but didn't think I got the personal /emmc stuff.
So I reformatted /data
Now I get stuck on a Motorola logo, doesn't appear to move.
I've tried flashing Everest.sbf with RSD, changing the recovery tool, I've even tried all the steps in http://forum.xda-developers.com/showpost.php?p=32784157&postcount=3 without adding su because it wasn't going to a technically savvy user.
I *think* I managed to get step 11 in the above thread completed, but I don't even get Honeycomb.
I've also tried the LAIOT, the Xoom Restore, and a couple others.
What I know? I don't have ADB access unless it's fastboot related. ADB will not function.
I was able to successfully flash EOS 3 and it's Gapps set as well. Both installed successfully but it still will not boot.
HELP!
LightGuard said:
Was trying to get ready to resell my Xoom after I got a USCC Galaxy Note 10.1.
I ran a factory reset, but didn't think I got the personal /emmc stuff.
So I reformatted /data
Now I get stuck on a Motorola logo, doesn't appear to move.
I've tried flashing Everest.sbf with RSD, changing the recovery tool, I've even tried all the steps in http://forum.xda-developers.com/showpost.php?p=32784157&postcount=3 without adding su because it wasn't going to a technically savvy user.
I *think* I managed to get step 11 in the above thread completed, but I don't even get Honeycomb.
I've also tried the LAIOT, the Xoom Restore, and a couple others.
What I know? I don't have ADB access unless it's fastboot related. ADB will not function.
I was able to successfully flash EOS 3 and it's Gapps set as well. Both installed successfully but it still will not boot.
HELP!
Click to expand...
Click to collapse
Holy frijoles! Flashing EOS 3 and it's Gapps package worked! I AM AWESOME!!!!
LightGuard said:
Holy frijoles! Flashing EOS 3 and it's Gapps package worked! I AM AWESOME!!!!
Click to expand...
Click to collapse
LOL, you just needed a boot.img. You had a device with no OS.