Hi Guys,
I've been googling for a while without avail.
I'm looking for a wired remote control for my motorcycle.
Let me elaborate.
I want the same function as the inline remote control, i.e. play/pause, FWD REV from 3 buttons on my handle bar.
The wire would be routed to the phone in my jacket pocket, while the audio signal should go to my intercom.
I know I could just buy a second headset or an iphone extension with remote and slice that up, but that would leave me with non weather proof and glove-unfriendly buttons.
Does anybody know of a more suited alternative ?
Or alternatively does anybody know what signals are used to control the audio ?
Thanks in advance
http://forum.xda-developers.com/showthread.php?t=659664
Or you could buy a nice new helmet with bluetooth in it (e.g. Nolan N102 + the bluetooth module). Not a cheap solution though.
I've tried this one: http://www.i-luv.com/product_detail.asp?idx=1387
and this one: http://www.griffintechnology.com/products/smarttalk
They both work fine but the volume control side of things is incompatible with the N1, no company is going to make something like this that adheres to actual standards in lieu of Apple's "standards" unfortunately. Play/pause and next/prev works fine, as does the inline microphone.
Related
Does anyone know anything more on this new remote?
http://www.expansys.com/htc/p_htc_item.aspx?i=145154
/magnus
The description seems to be very clear. It's just a wired remote control when using 3rd party headsets.
Description as stated in HTC's website.
A wired remote control for music and voice calls.
This compact in size and lightweight remote control includes functionality to manage both audio (Volume, Play/Pause/Forward/Backward) and calls (SEND/END, Mute with LED indicator, Hold switch, Microphone, Call waiting, and Voice dial).
The remote also includes a 3.5mm stereo headset jack (headet not included) and an FM antenna for devices with an integrated FM radio).
Hi, thanks!
Actually I was thinking more about if some knew about a release date or have tested one at some conference etc..
Best Regards
Magnus
I read about that new A2DP functionality for music so I got some interesting idea about turning my TC to a car mp3 player. My TC has 8gb so it's cool to have such amount of music in car without need to change discs or something.
There are new car cd players that support bluetooth, my question is how all this stuff works together ? Has anyone tried ? Is it comfortable at it's current state ? I mean will it connect automatically and will the cd player controls work to browse the music stored on TC or will I need to use the TC to navigate songs(less comfort while driving)... What about sound quality, is A2DP provides good sound ? What should I expect from such a setup ?
I would answer half of the question myself only If I would already have the bluetooth supported cd player, but my one doesn't support it :-( so I am thinking about a replacement and will it be worth or not.
I use my Tytyn2 for this purpose with a pioneer B65 Head unit. The quality is good enough for a car considering the background noise and far superior to using a FM transmitter. You will have to use the TC to control the tracks and the display on the head unit does not show track info.
Doesn't seems to be comfortable solution then... There is no interface that will allow head unit to control it ? :-((... Anyone else tried this ?
I use a Jabra BT320S to hear music in car using the line in of my head unit. Sound is good and obviously i have the TC to control the music. SOme programs have very finger friendly buttons. I'm very happy
This is the solution you are looking for.
Get a headunit with a USB port, such as this Kenwood. http://www.bassjunkies.com/index.php?pid=33470&show=expand_image
Install WM5torage on the PDA, and set it up so that the PDA appears as a mass storage device.
Plug the PDA into the headunit with a USB cable.
The headunit should now see the tracks in the memory card of the PDA.
Hope this helps.
WM5torage is not (currently) compatible with the Touch Cruise.
Hello,
since i'm an owner of an saxo vts, which is equal to say been roubed evey time. i just do not have normal player, i instead add amp. connected to the normal audio pre-installation.
Then a audio cable from the PDA to the input of the amp. this also means stereo no front back sound distribution.
i also thought about the bluetooth but then, i realize that with TomTom, phone call , plus blue streaming, the device was not power enough.
Ah since then no one broke in, why because there's actually nothing there to robe.
My Solution
X-Kent. I have been using bluetooth in my car for nearly a year now and it's definately the way forward. Forget plugging it in via USB!
My HU is a JVC BT-1.
First of all the quality of your A2DP can be configured using the 'Advance config' program (found on this forum). I also use a Sony bluetooth headphone receiver and at first my Orbit 2 sounded a bit...cheap! However by cranking up the sample rate to 48000, bit pool to 58 and the max bit pool to 80, it has increased the quality from a decent FM quality to CD quality. This is just in my experience and audio purists would argue otherwise. Nonetheless this applies to my reciever and my car BT.
Next is that if you use BT in your car you would change the tracks by using the phone NOT the head unit. But I think this is FAR better and safer. I have my phone mounted next to the wheel, and not only can I see what track is playing on my phone, I have big pause and next/back track buttons to press and I can even see the album art. Far better than the crappy text display you get on a head unit (unless you have a v.expensive one!) If you did use USB then it would put the track names on the HU and allow full control, but why when you can use the lovely phone touch functions.
Finally (this is where it comes into it's own). The BT-1 has a small mic that you can locate anywhere and you can make calls in the car without touching anything. The BT-1 allows voice dialling and you can speak to people thru your car. And because it's BT then you can have the phone in your pocket. The Headunit is intelligent enough to automatically pick up the phone when it's in range and link them together. No buttons required. If a call comes in and you're listening to music, the ring comes through the speakers of the car. You can then pick up and it pauses the music. When your conversation's done, the music starts up where you left off!
If you use Sat Nav, even if you're listening to music or having a convo, the voice instructions are also routed through your speakers.
Why use anything else other than bluetooth? Hope that helps
Jon
Hi,
I have a HTC Touch which I am currently using the Pocket Player software to stream my music from my PC which is located upstairs. I can connect the Touch to my Stereo amplifier through a USB/Jack cable and play the music through my Hifi speakers rather than headphones but I was wondering if it would be possible for me to transmit the audio to my amplifier by way of Bluetooth. It would cerntainly allow me the freedom of changing tracks on my phone sitting in my armchair rather than sat next to my amplifier through a cable. I.E Streaming music from my PC through Wi-FI, via my HTC Touch through bluetooth.
Hope this makes sense. Has anyone done it and is there a noticible difference in sound quality when sending music by bluetooth rather than a wired connection.
I have seen various Bluetooth type devices on ebay and amazon that claim to do this type of thing but as I have never tried Bluetooth I am a little sceptical and not sure exactly what is required. I assume that as my Touch can send Bluetooth beam I would only need a reciever to connect the Jack plug from my amp, is this correct? Or would it be better to buy a jack transmitter/receiver for the job.
I don't want to spend a whole lot of money doing this just to test so can anyone recomend a device.
Thanks in advance for any help.
hi there,
i use this device:
http://www.itechdynamic.com/en/products_spec.asp?cid=6&pid=06020 it's by itech and it's called bluecon35. the picture shows the black unit but i have the white one =) the 3.5mm jack is connected to the aux plug of my amplifier. my stereo system combined with the speakers are then also connected. from there, the bluecon is paired via bluetooth to my x7500. this gives me the luxury of changing track, albums, volume, etc. basically all the music is streamed to my amplifier via the bluecon. with regards to the quality, i would say it's quite good. i don't hear "noise" or static in the background...nor are there jumps or pauses in the connection. everything is just fine except that i'm using a much better set of speakers as compared to headphones.
disadvantages:
- if you listen to your sounds like for 8 hours, then you could have a problem. the battery life of bluecon is around and doesn't have an external power source that allows it to play even when paired. i read that itech is planning to come out with a new similar bt device but this time it's also plugged to the wall socket or a car charger. no idea when that will be
- a minor detail is that if you receive a call, an sms or your phone has an alarm for an event then these sounds are streamed into the amplifier as well.
cost? i got it from thailand and it was for 2000 baht....that's around 63 usd (based on a 32baht to dollar exchange rate).
hope that helps
I use a pinnacle soundbridge, which cost under £50, and it plugs into your hi-fi and streams music from your pc over your wireless network. It can be controlled using the ir remote control, or your pda can access it over wi-fi to control it. As well as streaming from you pc, you can also use it to listen to internet radio.
Thanks for the advice guys. Robson, the Bluetooth receiver is a possibility however after googling it I found a couple of bad reviews. Some people seem to have a problem connecting their devices to it and others have said it has trouble with streaming MP3's over 192kbps. I will look into this further.
Jez83uk, the Pinnacle Soundbridge looks like a really good idea. Is it differcult to set up with a PDA and will it connect to my PC through a wireless router.
Also were would you recomend picking one up for under £50.
Cheers for all the help!
Mine was £39.99 at ebuyer.com, but looking around a few websites they seem to be out of stock everywhere, google products. I recommend keeping an eye on ebay if you're interested in getting one. I have mine connected through a wireless router, and setup was extremely easy. You need to run a media server- I use firefly, but I believe that itunes or windows media player 11 can do the same thing. PDA control is just a case of installing two cab files for a package called visualmr. Hope this helps you.
belkin tunestage 1 here
...was originally only advertised as working with the supplied dongle for earlier ipods, which is how i used to use it, but i discovered it works great with A2DP too. should be v cheap on ebay...
I have the following question - the headsets of all modern phones, especially
the smartphones have a standard 3.5mm jack, so you could use any 3.5mm
headphones in order to hear something. But what about remote control buttons?
Will for example the buttons on a SonyEricsson headset, connected to an
HTC phone work?
I think, if it is implemented on a firmware level, it won't work, but if intercepting
the button signals is implemented in the player(s) itself, then perhaps even the
remote control buttons should work on other phones, if supported by the
player.
And what about normal headphones ? Are they usable for phone calls ?
Can you just listen to the other party through the headphones and your
voice would be transmitted by the standard microphone of the phone ?
darkman088 said:
I have the following question - the headsets of all modern phones, especially
the smartphones have a standard 3.5mm jack, so you could use any 3.5mm
headphones in order to hear something. But what about remote control buttons?
Will for example the buttons on a SonyEricsson headset, connected to an
HTC phone work?
I think, if it is implemented on a firmware level, it won't work, but if intercepting
the button signals is implemented in the player(s) itself, then perhaps even the
remote control buttons should work on other phones, if supported by the
player.
And what about normal headphones ? Are they usable for phone calls ?
Can you just listen to the other party through the headphones and your
voice would be transmitted by the standard microphone of the phone ?
Click to expand...
Click to collapse
From my experience, microphone + headphones work from every device if they have a 3.5mm jack.
Control buttons usually don't work from a device to another, because their signals are hardware specific.
Normal headphones are usable off course only to hear stuff from your phone.
In call, your built-in microphone will be used.
If I am wrong, someone please correct me.
Thanks, you helped me a lot
Hi there,
I'm trying to find a bluetooth remote that sticks to my steering wheel and:
Has a microphone for phone calls
Connects via bluetooth and fits to my steering wheel (to use with the right hand while driving)
Let's me: Accept calls, control volume and music (next/prev)
Is there anything like this? The closest I found is the Parrot MKI9000 - but I'm not sure if it needs wiring or not.
Thanks a lot for your suggestions,
Christoph
anyone got an idea?