Hi guys, first of all I just want to say thank you for this forum.. I ran into it a while back and was inspired to buy a kaiser just because of you guys. I have an iphone right now and I really want to replace it with something that has i don't know user accessible memory, MS office, GPS and the list goes on so I bout an At&t 8925, I got a good price on it and was very happy to finally able to get rid of the iphone
anyway I received the phone a few days ago and proceeded to do a sim unlock to use it with t-mobile after playing with it for a little while, I have already read the wiki, and lot of posts and searches..
I dnloaded this http://forum.xda-developers.com/showthread.php?t=375583 and plugged in the phone made sure activesynk connected and flollowed the instructions...
It went through the first step (hard spl) without a problem and I think the second step went well also. After that I begain the third step and the program froze, I waited for almost an hour just to be sure (windows also said it was 'not responding') I finally had no choice but to restart my computer, (its vista)
Anyway I pressed the power button on the phone and the phone acts like its booting up, I see the at&t screen, then it goes to the 3g screen and It just goes to a blank, black screen. I am still able to connect it to my computer and access the phone. I can access the 'boot loader' red blue green screen
I did a soft reset and tried to reload the unlocker porgram but nothing happens, I am stuck and I havent found out what to do through my searches can you guys help me out I am really new to this phone
I even took the time to downgrade my computer from vista to XP (finding all my drivers was a ***** since my computer was shipped with vista) but I found them one by one and still no luck loading the unlocker
one thing I did notice was that the bootloader screen now says "security unlocked" on top, not sure if It did that before
Thanks for all the help
Thanks
all you have to do to fix your phone is flash a new rom onto it. just open the boot loader and run the ruu and it should fix the problem
that's because you need to install a wm6.1 rom on your phone to use this unlocker. you would have found the answer if you read the thread
Olipro said:
hence why I wrote a message box on Step 2 stating "you may need to upgrade your phone to WM6.1"
****ing idiots.
Click to expand...
Click to collapse
oh **** how did i miss that... going to try another rom, i'll let you guys know how it goes
thanks
tman6919 said:
oh **** how did i miss that... going to try another rom, i'll let you guys know how it goes
thanks
Click to expand...
Click to collapse
Thread done. Please remember to read through all instructions etc...
Dear Folks at XDA,
I would like to ask for you help with my HTC Touch Pro 2. I recently tried to update it to the new AthineOS CHome TF3D WM6.5 Manila ROM v 1.0 and unfortunately I failed.
The problem is that my phone now freezes at the black startup screen with the Touch Pro 2 logo and the red codes at the bottom.
I've flashed the ROM several times before and never got this issue.
Due to the fact that the phone doesn't finish the boot-up and I thus I can't get ActiveSync I'm afraid I messed up my phone for ever.
Please someone tell me I got a way out of this, I'd appreciate it very much.
Greetz,
SjonSjon
umm.... I don't think you can change the firmware just yet on the CDMA version of the phone... if you used a HardSPL that's available in the Rhodium forums then you probably used a GSM specific ROM on your CDMA phone... not sure what to tell you other than making sure you read the CDMA forum before trying something so risky. Best solution, unless someone knows how fix your phone in it's current state, is to toss it under your car and run it over and try to cash in on the insurance.
Problem solved!
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
I am glad you have recovered the beautiful device; and thanks for sharing a working solution.
sjonsjon said:
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
Click to expand...
Click to collapse
Good job!
big thanks for solution.
You just saved my life!!!
Don't get our hopes up! This is the wrong forum. CDMA TP2s can't be flashed at all yet.
This was a life saver post so a quick bump for anyone that needs it.
I unlocked my CDMA phone, installed a few roms -- decided to go back to my stock rom default (which was Telus) -- reinstalled and bam -- bricked.
Well, technically it's not a brick if you can get back into the bootloader to reflash. So no worries everyone. If everyone reads instructions well enough we should hopefully see zero "real" bricks. Or at most, just enough to only build bbq pit rather than a house.
I think my phone is truly bricked
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
my cdma is rebooting endlessley i reflashed stock rom and evorything. it seriously dosnt want to work. its most sadness... i am cashing in on the insurence. but they are going to send me a refurb..
spend 600$ on a phone got inurnce i hope the used one dosnt fail me.
Esazi said:
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
Click to expand...
Click to collapse
I did the same exact thing to mt TP2. Same outcome.
We have to learn somehow....
That stinks man. If you did, then your phone is truly bricked. You are going to have to get a replacement or switch to another phone because there is nothing you can do to get it going again. I tried everything possible and eventually just ordered a replacement. I have it now and it's working beautifully, but needless to say I am a little scared away from any more unlocking or flashing for a while.
If you read carefully you dont have to be scared of flashing
I was a noob some time ago but before doing anything I took care of reading and understanding before doing nothing.
lesson learned
By now I have flashed more than 60 times on 3 diferent HTC devices and all were a succes
Hope you get your TP2 working again!
I hope I can get there
Someday I hope to be a flashing expert, but until then I will take it slow and read carefully. Thanks for your encouragement. When I actually get money to pay for the unlock for my TP2, I will let you know how flashing goes.
How do you keep the phone in bootloader? Mine goes right to the press volume instuction screen. Other than that I'm stuck on the black name screen,also my usb will not register in device manager. This was my first try at flashing.
gadgetgirl28 said:
You just saved my life!!!
Click to expand...
Click to collapse
Holy hell, you're not lying. Thanks for coming back to post your solution!
This post saved me at least a few hours of frustration and ever worsening decision making.
So it's totally true???
this situation hasn't solution;
I was unlocking my phone (the HTC Touch Pro 2 <SPRINT>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, AND PLEASE somebody tell me , that it can be save it
;9
please help
i have the same problem. is there a way to save my phone?
Hi. This is my first time posting. I apologize in advance, im going to come across as a noob.
I got tired of waiting for google to get 2.3 to the N1 users. I decided it was time to unlock and root my phone, after all thats what it was designed for. Up until this point the phone was stock with all updates. I thought one touch root no longer worked. I dont know why i thought this. I used a guide to work through it. I cannot post links otherwise i would. ilikemygooglephone . com is where it came from
Everything worked according to this guide until I completed it and powered my phone on for the first time. I thought I was going to see a stock wiped nexus one...Instead I got shafted.
The phone reboots randomly. It happens quickly and unpredictably.
Notification bar will never slide down. If i try to the phone lags but never shows notifications.
No 3g
No wifi
The phone says I have no service (selected network tmobile unavailable) although I can still make and receive calls.
The sd card will not mount. I cannot access it on the phone. When pluggen into my laptop the phone will charge but wont give me the option to access the sd card.
At times the graphics are buggy and dont operate properly
There are probably other problems that i am forgetting but I think this says enough. Since i cannot access the SDcard I really dont know what to do.
Im sorry if this thread is in the wrong place or happens to be a previously answered question. I just really like my phone and I hope its not wasted. Can someone tell me what I did wrong or how i can get this right.
YEAH i noobed it.
I freaked out on the above issue for about 5 hours. Now I believe i have everything back to normal. My problem was i didnt load the proper superboot. Once i found the FRG83 one and redid the process using that instead it worked fine. Either i was using the wrong superboot or i had a corrupted download somehow.
Feels good to figure it out on my own though....i feel...less noob.....NAH
Last week I rooted my primary phone, a Samsung Admire with Gingerbread 2.3.4. This was done only after successfully rooting my older LG Optimus T running Fryo. I had no trouble with either phone during the process. However, as of 2 days ago the Admire has had some troubles, namely that the phone function crashes when I press the send key. I get the error message stating “Sorry! The process com.android.phone has stopped unexpectedly. Please try again.” It will receive incoming calls but they cannot be answered and when I try, it crashes
I’ve spent much of the time since researching the problem to find the cause and it’s fix. In doing d\so I have read of multiple causes from screen resolution changes to attempted over clocking, which I have played with. I’ve read that there might be problems with the phones attempting to switch from 2g to 3g too rapidly, something this phone cannot do I believe.
I came to the conclusion, probably erroneously, that I needed to reset it back to factory and then reinstall apps and data out of the backup I made using Titanium Backup prior to the phones troubles. So I did so, doing the three button cocktail I’ve read about here on XDA Forums. After doing this, the problem persists. I’ve read some more becoming more baffled as I went along. So I tried to reroot the phone using one click root, and that was unsuccessful as well, no root. I then read that all I needed to do was to install Superuser from the Market. In attempting this I found my device was no longer recognized by Market and after going through their troubleshooting process it’s still unrecognized, Next I decided, also most likely erroneously to reset the phone again using the three button combo as before. This time I noticed at the bottom of the screen written in yellow, E: File is written: not updated
Also as a side note my phone currently says that there are 133MB available and after the reset(s) my bloat ware has not returned,
So that’s it. I seem to have deleted something that kills the phone app and prevents me from rooting. Other than those two things the phone is working well. However as it sits it’s merely a small Internet tablet with no phone capability. Can anyone help me out with this? And yes, I have read and read and read about it but clearly this is beyond my ability to fix on my own.
Thanks,
Zeke
Hey, my skill level ranges between beginner and intermediate, but honestly in a situation like that I would odin back to stock. I have an epic 4g, so I have no idea what your download mode is or if you have one or if you have to use quick boot or fast boot? Its one of those. If **** ever hits the fan on me (Thank god it hasn't yet) I would odin to an old stock rom and root it and install a recovery and wipe and flash a ROM. Good luck I hope I helped and didn't sound like too much of a scrub.
Reached said:
Hey, my skill level ranges between beginner and intermediate, but honestly in a situation like that I would odin back to stock. I have an epic 4g, so I have no idea what your download mode is or if you have one or if you have to use quick boot or fast boot? Its one of those. If **** ever hits the fan on me (Thank god it hasn't yet) I would odin to an old stock rom and root it and install a recovery and wipe and flash a ROM. Good luck I hope I helped and didn't sound like too much of a scrub.
Click to expand...
Click to collapse
I will research this Odin you mention as I have no clue as to what it is. Thanks, anyone else care to chime in?
Zeke
Okay so I've been looking for a LONG TIME trying to find a solution to this problem, but have yet to find one, so if this thread is a duplicate issue, please move it to where it needs to be.
I have a Metro PCS Kyocera Hydro XTRM. I rooted the phone and it was fine. I will be the first one to tell you i am a major newbie when it comes to smartphone tweaking. I have been playing with electronics for years, and can pretty much build a desktop computer but newbie when it comes to android devices. So upon suggestion from a dev, I downloaded an app from the play store "BootUnlocker."
As Soon as I rebooted my phone, BAM! It gets stuck on the METRO PCS screen and stays there. I have pretty much tried everything I can think of. I have removed the battery a billion times and tried to hard reset the phone numerous times as well. And now, it won't even turn on but the LED power light on the front flashes when it's plugged in. I was thinking of trying Odin but when I plug the phone into the computer's USB port....it does absolutely nothing...doesn't read a thing.
I am hoping someone will be able to help with this soon as I would really like to know how to go about recovery on a phone that is completely Hard Bricked (as mine is now). If anyone has any suggestions, or has recovered a hard bricked xtrm, I would be so very thankful for your input.
Hi there! I'm afraid XDA doesn't have any information on that device that I can find. So....you can ask in our general Q&A section. I will ask a moderator to move your post there.
This is where it will go....
http://forum.xda-developers.com/general/help?nocache=1&z=581026349682360
The only other suggestion I can give is to try searching the web for info on your device.
Hope you get it worked out!
never mind