not too happy with this... here is a screen that may help:
Uploaded with ImageShack.us
network type says hsdpa (it should say hspa, right?).if i have to root, i'm ok with that (it'd be my first time, though) but these > 200 kbps uploads have got to come to an end. if there's a tutorial for this, i would appreciate it GREATLY if someone could point me to it? thanks so very much!
eric b
Hspa? Nexus s is only capable of hsdpa speeds (7.2mb). If you're talking about upload speeds then.
What carrier are you using? Update your radio to KB3
Sent from my Nexus S using Tapatalk
hspa is high speed packet access, which is to say it's both hsdpa and hsupa at the same time. i'm on at+t, and i'll have a look into that radio. thanks a lot!
eric b
you have to edit your build.prop to enable the higher upload speeds above 384Kbps. just set hsxpa=3 in the build prop file, and you're good to go. you should see around 1Mbps to 1.5Mbps upload.
all right... i've opened the build.prop file in text editor, but i don't see hsxpa anywhere to change the value. am i missing something, or do i just enter that line in? and if so, does it matter where? thanks in advance.
eric b
if it helps/matters, my build.prop file is:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRI54
ro.build.display.id=GRI54
ro.build.version.incremental=105536
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
ro.build.date=Wed Feb 23 17:42:35 PST 2011
ro.build.date.utc=1298511755
ro.build.type=user
ro.build.user=android-build
ro.build.host=android-test-17.mtv.corp.google.com
ro.build.tags=release-keys
ro.product.model=Nexus S
ro.product.brand=google
ro.product.name=sojua
ro.product.device=crespo
ro.product.board=herring
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crespo
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sojua-user 2.3.3 GRI54 105536 release-keys
ro.build.fingerprint=google/sojua/crespo:2.3.3/GRI54/105536:user/release-keys
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Sceptrum.ogg
ro.config.notification_sound=Castor.ogg
ro.opengles.version=131072
wifi.interface=eth0
wifi.supplicant_scan_interval=15
dalvik.vm.heapsize=32m
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
keyguard.no_require_sim=true
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
eric b
ugh, looks like i need to use the recovery for an i9023 now? this is turning out to be a major headache... and a lesson learned.
eric b
i believe if its not in your build prop, you just add that line you need to the end of your file. not sure about custom recoveries you mentioned, that shouldnt be needed. just search out the build prop edits, and add that line to yours.
e-dub said:
ugh, looks like i need to use the recovery for an i9023 now? this is turning out to be a major headache... and a lesson learned.
eric b
Click to expand...
Click to collapse
all mods require clockwork recovery -.-
alternatively, you can flash 2.3.3 and it'll update your radio
zephiK said:
all mods require clockwork recovery -.-
alternatively, you can flash 2.3.3 and it'll update your radio
Click to expand...
Click to collapse
so when i get mine on teusday I can Root, CWM, and then just update to newest CM7 with 2.3.3, will that update my radio as well?
This is what I did to get some improvement.
forum.xda-developers.com/showthread.php?t=951564
Related
System Version
Blur_Version.34.177.3.MB525.Retail.en.xx (DACH)
APflex version
GAS_EMEA_USAJRDNFROYODACH_P014
Kernel
2.6.32.9-ga28fcc4
jfqk83 zch68lnxdroid07 @ # 1
Build
JOREM_U3_3.4.2_177-3
Android version
2.2.2
SBF:
http://www.multiupload.com/Q8E3XB3IZC
Nandroid Backup:
http://rapidshare.com/files/2866807190/3.4.2-177-3.rar
http://www.megaupload.com/?d=N5DXSAF0
via http://www.android-hilfe.de/
_____________________________________
a Nordic w/ BLUR
nice,i hope the SBF will be out soon..love the nordic speed but i want BLUR.
added the SBF file.
argh, same version number as debur one (177-005)... will confuse more than one for cm7 ^^
and also almost the same kernel version number... which was 2.6.32.9-ga28fcc4[email protected] #1
Differences in SBF with 177-005 :
only CG35, CG39, CG47
so its possible to flash only the new kernel and recovery
here is the new kernel+recovery sbf (bootonly) : http://defy.tanguy.tk/sbf/
Tested ok on CM7 (my original SBF was the 177-005)
Linux version 2.6.32.9-ga28fcc4 ([email protected]) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Fri Apr 1 16:08:01 CST 2011
this kernel is older than the 177-005 (6 Apr) but may have different features...
Code:
ro.build.id=3.4.2-177
ro.build.display.id=JOREM_U3_3.4.2_177-3
ro.build.version.incremental=1301649447
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.2
ro.build.date=Fri Apr 1 15:52:08 CST 2011
ro.build.date.utc=1301644328
ro.build.type=user
ro.build.user=jfqk83
ro.build.host=zch68lnxdroid07
ro.build.tags=release-keys
ro.product.model=MB525
ro.product.brand=MOTO
ro.product.name=MB525_RTDACH
ro.product.device=umts_jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=de
ro.product.locale.region=DE
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jordan_emara
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=umts_jordan-user 2.2.2 3.4.2-177 1301649447 release-keys
ro.build.fingerprint=MOTO/MB525_RTDACH/umts_jordan/jordan:2.2.2/3.4.2-177/1301649447:user/release-keys
# end build properties
#
# system.prop for UMTS Jordan
#
rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libril-moto-umts-1.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ro.default_usb_mode=0
# wlan interface
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=30m
# System property for SMC
ro.service.start.smc=1
#proximit sensor screen off delay
mot.proximity.delay=450
#proximit sensor disable touch distance
mot.proximity.distance=60
#doesn't use Java DNS cache. Use only bionic cache.
networkaddress.cache.ttl=0
# BEGIN Motorola, drmn68, 13-July-2010, IKSTABLEONE-729
# true when phone launches UI successfully, default is flase
sys.mot.ui.launched=false
# END IKSTABLEONE-729
# BEGIN Motorola, wlss01, 15-Sept-2010, IKNAMERCOM-2241
# Port IKSTABLETWO-7241 Master clear is taking more then 30 minutes
ro.mot.master_clear.shredsd = false
# END IKNAMERCOM-2241
# BEGIN IKJORDANFR-65 Motorola, fpx478, default Mobile Hotspot is on
ro.mot.mynet=true
# END IKJORDANFR-65
# IKJORDAN-3341
windowsmgr.max_events_per_sec=70
#IKSHADOW-4638
# This defines the min duration between two pointer event in ms
ro.min_pointer_dur=10
# BEGIN, Motorola, qwp843, 12/06/2010, IKJRDNEM-3696
# Handle No audible indication while capturing photos in silent mode
# The property "ro.camera.sound.forced" is defined by google.
# Use "ro.camera.sound.forced" to decide whether camera shutter tone is forced: 1 forced; 0 not-forced.
ro.camera.sound.forced=0
# END IKJRDNEM-3696
# 33830, 33925, 33926. Terminal Download Feature. T-Mo Url
ro.mot.portal.url=http://home.web2go.com/
#vvm activity log and dialer.
ro.mot.vvm_enable=0
ro.mot.vvm_editable=1
#IKMAP-7365 BatteryManager: Wi-Fi control to be made flexible
ro.mot.battmanager.wifictrl=0
#IKJORDAN-1087(IKBASIL-804) use new generic UA profile
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB525/profile/MotoMB525.rdf
ro.mot.fid.34081.enable=false
#IKJRDNEMFR-14 extract artwork from ID3V2 box for 3gp files
ro.mot.id3v2.artwork.enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
gsm.sim.mot.simswap=1
ro.config.ringtone=EtherShake.ogg
ro.mot.battmanager.wifictrl=0
ro.mot.hw.ringerswitch=0
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=false
ro.default_usb_mode=0
ro.com.google.gmsversion=2.2_r9
ro.media.camcorder.vga=3gp,h264,24,4000000,aac,96000,44100,2
ro.media.camcorder.cif=3gp,h264,24,1500000,aac,96000,44100,2
ro.media.camcorder.qvga=3gp,h264,15,500000,aac,32000,16000,2
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
ro.media.enc.aud.bps=12200
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.capture.maxres=5m
ro.media.capture.flash=led
ro.media.capture.classification=classH
ro.media.capture.flip=horizontalandvertical
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.shuttertone=1
ro.media.capture.panorama=0
ro.media.camerapreview.reg=480x360
ro.media.camerapreview.wide=848x480
ro.camcorder.VideoModes=false
ro.camera.DynamicFocus=false
ro.blur.setupprovider.tmo=false
ro.blur.setup.silent=false
gsm.sim.mot.simswap=1
ro.com.motorola.smartsensor=true
ro.vf360_features.enabled=false
ro.blur_carrier_vodafone=false
ro.blur_carrier_tmo=false
ro.setupwizard.mode=DISABLED
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.mot.dpmext=true
ro.build.svn=40
ro.mot.hw.crystaltalk=1
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB200/profile/MotoMB200.rdf
ro.build.version.full=Blur_Version.34.177.3.MB525.Retail.en.DE
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.locationfeatures=1
ro.com.google.clientidbase.ms=android-motorola
So... better this or the old (newer) kernel?
Perilla_ said:
So... better this or the old (newer) kernel?
Click to expand...
Click to collapse
Depends if you want to have blur or facebook contacts integration. For CM7 base I think the blurless would be better.
@Epsylon3
thanks for the inputs :]
Can anyone Upload the Zip?....Its 360Mb
HERE the Fixed.sbf!
What languages does it support?
Perilla_ said:
So... better this or the old (newer) kernel?
Click to expand...
Click to collapse
hard to tell... there is maybe less debug features... i dont know
a tool to compare /sys and /proc is required...
Sorry for the dumb question, but what a difference or improvement of the SBF Fixed? Or the nandroid Backup?
in fixed sbf not is installed cg31 and cg39(system)
in nandroid backup the file system.img its the system/app that you can see in your device from rootexplorer!
iaio72 said:
in fixed sbf not is installed cg31 and cg39(system)
in nandroid backup the file system.img its the system/app that you can see in your device from rootexplorer!
Click to expand...
Click to collapse
THANKS for the reply friend!
You know what languages supports this rom?
can someone please compare this rom with uk froyo 3.4.2-117, thanks
nonsense91 said:
can someone please compare this rom with uk froyo 3.4.2-117, thanks
Click to expand...
Click to collapse
http://defy.tanguy.tk/system-md5sum/
Epsylon3 said:
http://defy.tanguy.tk/system-md5sum/
Click to expand...
Click to collapse
thanks but how do i use that?
Did anyone tried?....I tried to flash full SBF two times, but getting error in RDS...
No Data
I loaded this using the Nanodroid but there is no Data coverage. Does anyone have a fix for this. Everything else works and looks great but just no T-Mobile 3g data coverage.
*update: I got data going just in Edge by adding the apn epc.tmobile.com but it only comes back as EDGE. How can I get is at 3G. Does this have 3G coverage.
Please Help.
does this rom support 720p PLAYBACK ??
mjsheldon4 said:
I loaded this using the Nanodroid but there is no Data coverage. Does anyone have a fix for this. Everything else works and looks great but just no T-Mobile 3g data coverage.
*update: I got data going just in Edge by adding the apn epc.tmobile.com but it only comes back as EDGE. How can I get is at 3G. Does this have 3G coverage.
Please Help.
Click to expand...
Click to collapse
Try baseband switcher(also found on this defy forum). Because the default baseband of this ROM is 900/2100.
rachit2588 said:
does this rom support 720p PLAYBACK ??
Click to expand...
Click to collapse
You can add the library for 720p playback. Search for anti-byte's post for fullscreen recording and hd playback.
can someone kindly updload their 3.1 WIFI Xoom Build.prop
only if its the wifi version xoom
thanks!
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37
ro.build.version.incremental=124251
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Sat May 7 02:22:32 PDT 2011
ro.build.date.utc=1304760152
ro.build.type=user
ro.build.user=android-build
ro.build.host=android-test-7.mtv.corp.google.com
ro.build.tags=release-keys
ro.product.model=Xoom
ro.product.brand=verizon
ro.product.name=trygon
ro.product.device=stingray
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=stingray
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=trygon-user 3.1 HMJ37 124251 release-keys
ro.build.fingerprint=verizon/trygon/stingray:3.1/HMJ37/124251:user/release-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
# RIL and telephony related settings
rild.libargs=-d /dev/chnlat10
rild.libpath=/system/lib/libmoto_ril.so
persist.ril.mux.ttydevice=/dev/usb/tty2-1:1.2
persist.ril.mux.noofchannels=8
persist.ril.modem.mode=1
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
persist.ril.modem.ttydevice=/dev/usb/tty2-1:1.4
ro.telephony.default_network=4
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# Indicate carrier OTA SP number schema
# refer to frameworks/base/telephony/java/com/android/
# internal/telephony/cdma/CDMAPhone.java for the schema:
ro.cdma.otaspnumschema=SELC,1,80,99
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.clientidbase=android-verizon
ro.config.ringtone=Sceptrum.ogg
ro.config.notification_sound=Cobalt.ogg
ro.config.alarm_alert=Cesium.ogg
keyguard.no_require_sim=true
ro.setupwizard.mode=OPTIONAL
drm.service.enabled=true
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
That's what mine looks like...hope that helps
Thanks soso much
Can u actually upload or attach the prop file itself
Copy and paste it to SD card if u need to
Sent from my MB860 using XDA Premium App
So... wait a minute. The WiFi version contains bits talking about Verizon. Anyone have any idea why?
Sent from my Xoom using Tapatalk
SS2006 said:
Thanks soso much
Can u actually upload or attach the prop file itself
Copy and paste it to SD card if u need to
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Here you go. My Xoom is a US Wifi only, running Tiamat ROM 1.0
Curious... XDA won't let me attach the file....
cam30era said:
Here you go. My Xoom is a US Wifi only, running Tiamat ROM 1.0
Curious... XDA won't let me attach the file....
Click to expand...
Click to collapse
I still don't think people understand. If you are running tiamat rom or tiamat update for 3.1 you are not wifi anymore. You are on a 3g system.
Here is the stock 3.1 wifi build.prop http://dl.dropbox.com/u/18315605/XDA/build.prop
bwcorvus said:
I still don't think people understand. If you are running tiamat rom or tiamat update for 3.1 you are not wifi anymore. You are on a 3g system.
Here is the stock 3.1 wifi build.prop http://dl.dropbox.com/u/18315605/XDA/build.prop
Click to expand...
Click to collapse
I suspected, but was not sure. That's why I stated that the build.prop was from the Tiamat ROM. Thank you for clairfying.
Sent from my Xoom using XDA Premium App
rmcsc said:
So... wait a minute. The WiFi version contains bits talking about Verizon. Anyone have any idea why?
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
No it doesn't. The build.prop from above is from a Verizon 3g xoom. Check the one i just posted, its a true wifi build.prop.
Thanks to both of you
very much appreciated
This is the stock rom I9001 2.3.4 and 2.3.6 (value pack) DDKPE
Here is the link,,,
Link updated...for DDKP5 STOCK ROM
http://ubuntuone.com/6i05hrHot7BuSpWYXGHw9V
Valuepack ROM released for GS+9001 for India... Here is the link. I will add details later.....or somebody can help...
http://ubuntuone.com/4xeNroJ1m3mxGBS24On9MY
Enjoy
nikku_hot123 said:
can anybody give me I9003DDKPE stock rom for gingerbread 2.3.4?
Click to expand...
Click to collapse
Can you tell me why do you need that rom.Maybe I can help you with different.
Why you are asking for 9003 in 9001 forum?
Sent from my GT-I9001 using XDA App
I accidently deleted My stock twlauncher and i am unable to restore it. I am afraid of warranty voilation.
That is why i want stock Rom.
Sorry its I9001...edited.
Alternate
Ok so i cant help u find the stock 2.3.4 but if your phone isnt working as in u've got a black screen with the notification bar get a launcher like launcher pro or adw on your computer and send it via bluetooth and in the notification install it. atleast ur phone will work until u can find the rom u are looking for.
I got it if anybody needs it please tell me....
Sent from my GT-I9001 using XDA App
I need it. Can you upload it or post the link
Sent from my GT-I9001 using XDA App
I am at office now. I will upload it when I will reach my home.
Sent from my GT-I9001 Cranium RC2 using XDA App
sahilkhurana said:
I need it. Can you upload it or post the link
Sent from my GT-I9001 using XDA App
Click to expand...
Click to collapse
uploaded !!!!! check my first post. And say thanks!!!
link updated!!!!
Thanks buddy !!
Value pack official indian ROM 2.3.6 Added to first post...
Sent from my GT-I9001 using Tapatalk 2
Ohh no resume support for download
Sent from my GT-I9001 using xda premium
Great to see Samsung still cares for their Indian customers
I hope I'll be able to use kies again after flashing the rom.
nail16 said:
Great to see Samsung still cares for their Indian customers
I hope I'll be able to use kies again after flashing the rom.
Click to expand...
Click to collapse
Yeah! after 2.3.4 it directly jumped to 2.3.6. it was out on april last week.
@nail can you test with stock 2.3.4 with kies whether it is asking for update? unfortunately i have no data cable now..
Sent from my GT-I9001 using Tapatalk 2
I had installed 2.3.4 before but kies wouldn't support the phone, it would always show "this Device cannot be updated via kies"
i'm flashing 2.3.6 now.
btw from where did you get this firmware ? it's isn't there at the sammobile website
nail16 said:
btw from where did you get this firmware ? it's isn't there at the sammobile website
Click to expand...
Click to collapse
I got it from checkfus tool... i was also having the problem with kies.. But i don't remember where did i change registry values and i am not having cable to check..
Sent from my GT-I9001 using Tapatalk 2 Beta-6
It's a .bin file how do i flash this ?
can you provide flashable cwm recovery file???
Sent from my GT-I9001 using XDA
abhi.a3s said:
can you provide flashable cwm recovery file???
Sent from my GT-I9001 using XDA
Click to expand...
Click to collapse
i will try it now
just wait some few hours
here are some infos:
I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.md5
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQD
ro.build.version.incremental=XXKQD
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Sat Apr 7 11:26:35 KST 2012
ro.build.date.utc=1333765595
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL126
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQD release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQD:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQD
ro.build.hidden_ver=I9001XXKQD
ro.build.changelist=1077879
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
I9001 VALUE PACK
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQB
ro.build.version.incremental=XXKQB
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Mar 20 11:04:55 KST 2012
ro.build.date.utc=1332209095
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL176
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQB release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQB:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQB
ro.build.hidden_ver=I9001XXKQB
ro.build.changelist=1044586
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
CHANGES
>Can take pictures while video recording
>Touchwiz V4.0 (but the same old icons)
>Photoeditor
>Option to change font size under "Accessibility"
>Face recognition
>Camera (seems to focus faster)
>GPU drivers
>Autorotation is faster
I checked the gpu drives there's one file repacked
but it doesn't change the score
It seems they have made a slight change in the gpu drivers.
Please test some HD games and give feed back. (A slight tweak could have done the trick)
Compared the build.prop whith the KQ7 one
No major changes.
BUGS
1)The dock reset's to it's original layout after clearing the RAM or rebooting (thank's to XenoBE)
2)App icons are misplaced after a reboot.
You can Avoid these bugs by deodexing the rom and then doing a factory reset by dialing *2767*3855#
DOWNLOAD LINK http://www.hotfile.com/dl/151902003/fbfff2d/I9001XXKQB_I9001OXXKP8_AUT.zip.html
http://samsung-updates.com/get/762/Samsung_Firmware_GT-I9001_AUT_I9001XXKQB_Android_2_3_6.html
Thank's to crybert, Here is a deodexed Version of the KQB Firmware.
The zip Package is flashable via CWM/FeaMod an StockRecovery.
https://sourceforge.net/projects/cry...ional Stuff/
Zippyshare link http://www8.zippyshare.com/v/49143861/file.html
It only contains the app/framework folder. So you have to Flash KQB via Odin first.
nail16 said:
I9001
PHP:
DOWNLOAD LINK http://www.hotfile.com/dl/151902003/fbfff2d/I9001XXKQB_I9001OXXKP8_AUT.zip.html
Click to expand...
Click to collapse
nail have u flashed it already? so ? is it the cheap update that's supposed to replace ics ??
I have flashed it its has TW4 so it's super smooth, i'm checking the gpu md5 checksum to see if there are any changes
nail16 said:
I have flashed it its has TW4 so it's super smooth, i'm checking the gpu md5 checksum to see if there are any changes
Click to expand...
Click to collapse
let's hope so, and hopefully better RAM mangement
Is there any problems with WiFi?
Sent from my GT-I9001 using xda premium
Waiting for some screenshots.
Finally..... Please post some screenshot, antutu benchmark, wi-fi experience, GPU, battery usage and etc
He already posted some screenshots. Look in the first comment.
**** this, It has the same old gpu drivers
i'll post the antutu scores
What about lockscreen, how does it looks like, and power menu? Is it laggy?
Gusta_HR said:
What about lockscreen, how does it looks like, and power menu? Is it laggy?
Click to expand...
Click to collapse
The lockscreen is not laggy, its very smooth. And it looks like the Galaxy Note lockscreen. The phone is not laggy at all.
It's XXKQ7 with the new added crapwiz v4.0 and the premium **** (photo editor,face lock)
Browser is the same still can see the Checkered boxes while scrolling large pages
hmm... 19 min of odin flash still on system.img.ext4 download , i'm starting to get worried
Edit: finally ,after 21 min odin decided to finish
Ive found already a bug :s
When i was adding a widget, and i pushed the back button, the homescreen was stuck in the "adding-widget" like homscreen, you can do everything but the homescreens are smaller. The only thing you can do is reboot.
I think i will not flash it... dont like tw 4.0 it has lots of wasted space between dock icons and screen... one word this is crap...
is this the official value pack?
Fukin bastards didn't bother to update the apps
samsung = Bunch of assholes
Gusta_HR said:
I think i will not flash it... dont like tw 4.0 it has lots of wasted space between dock icons and screen... one word this is crap...
Click to expand...
Click to collapse
trust me it is quick, the old touchwiz is slow, this one kills it, scrolling in app drawer has never been this quick on a stock touchwiz
210mb average RAM used without anything installed, too much in my opinion,i think 180mb (as on SGS) would've looked nice.
the auto rotation is also tweaked, try watching a youtube video and rotating to landscape, it takes less than a sec
also as mentioned before, lockscreen is not laggy (for now).
Edit: Gallery loads very guickly. camera app has the snapshot icon durin video recording. autofocus still not present (at least according to my eye) .
XenoBE said:
Ive found already a bug :s
When i was adding a widget, and i pushed the back button, the homescreen was stuck in the "adding-widget" like homscreen, you can do everything but the homescreens are smaller. The only thing you can do is reboot.
Click to expand...
Click to collapse
I encountered the same bug. One workaround is add a shortcut to the screen and then delete it. Worked for me now 3 times...
Is this Value Pack is Official Release or Custom Made ?
and it is KQ7
and on Samfirmware there Switzerland Rom which is KQB 2012 April Release
Which one Should we install and
is wifi problem solved in this pack ?
New firmware available on SAMMOBILE or you can use the http://fus.nanzen.se/ webpage and utility to download:
Region Baltic
Date 2012 July
Android 2.3.6 (possibly value pack)
I9001XXKQI/I9001OXFKQ3/I9001XXKPM/I9001XXKQI
download location: http://www.hotfile.com/dl/164483305/...3_SEB.zip.html
Cant flash this till the afternoon so if anyone else tries this, please inform us about possible changes or TW fixes.
------
TW is still buggy (thanks to Texten for reporting)
Downloading , will post my review later.
morofaya said:
Downloading , will post my review later.
Click to expand...
Click to collapse
Seems changelog is the same
Pezmet said:
Seems changelog is the same
Click to expand...
Click to collapse
nope:
PDA: I9001XXKQI
CSC: I9001OXFKQ3
Version: 2.3.6
Date: 2012-07-24
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Download: http://www.hotfile.com/dl/164483305/37592e1/I9001XXKQI_I9001OXFKQ3_SEB.zip.html
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQI
ro.build.version.incremental=XXKQI
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 29 09:28:57 KST 2012
ro.build.date.utc=1340929737
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL170
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQI release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQI:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQI
ro.build.hidden_ver=I9001XXKQI
ro.build.changelist=[COLOR="Red"]1159246[/COLOR]
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r10
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
have it extracted right now. will test touchwiz launcher
Will test it and reply
ok, touchwiz launcher 4 is still buggy.
maybe someone should test the launcher with this whole rom. just to be sure.
and maybe something is fixed, like lockscreen?
texten said:
ok, touchwiz launcher 4 is still buggy.
Click to expand...
Click to collapse
Good work once again Samsung...
Thanks texten. I will update first post.
texten said:
ok, touchwiz launcher 4 is still buggy.
Click to expand...
Click to collapse
A small question: where did you get the attached file from? I just extracted the TW app from ROM system image and the MD5 is different... Also smaller - 1.75MB
cjason said:
A small question: where did you get the attached file from? I just extracted the TW app from ROM system image and the MD5 is different... Also smaller - 1.75MB
Click to expand...
Click to collapse
just extract the "rom".tar.md5 with 7zip, use the cygwin kitchen and set up a working folder with cache.img.ext4, system.img.ext4, and boot.img
then you can deodex the rom and use single apk's
texten said:
just extract the "rom".tar.md5 with 7zip, use the cygwin kitchen and set up a working folder with cache.img.ext4, system.img.ext4, and boot.img
then you can deodex the rom and use single apk's
Click to expand...
Click to collapse
Oh, it's a deodexed apk... This explains the difference
Thanks.
Anyway, too bad it's the same BS...
Is there any improvements?
who cares about samsung roms.. as we've got some aospish
Sent from my GT-I9001 using xda app-developers app
They must give ics not gb
Sent from my GT-I9001 using xda premium
texten said:
ok, touchwiz launcher 4 is still buggy.
maybe someone should test the launcher with this whole rom. just to be sure.
and maybe something is fixed, like lockscreen?
Click to expand...
Click to collapse
Lockscreen can be fixed for no wallpaer with fix permisions
Pezmet said:
Lockscreen can be fixed for no wallpaer with fix permisions
Click to expand...
Click to collapse
i mean the charging notification
Are you talking about CWM recovery fix permissions ???
Is there a chance TW can be fixed with fix permisssions as well ???
Or by deodexing ???
quendil said:
Are you talking about CWM recovery fix permissions ???
Is there a chance TW can be fixed with fix permisssions as well ???
Or by deodexing ???
Click to expand...
Click to collapse
Feamod recovery, yes TW no.. even with hard to kill launcher from V6 same issues accor.
If someone can post a deodexed rom it will be great.
Thank you
It has new baseband version: XXKPM
For who it is interested to flash through odin only the baseband you can download in "porting state post"