[Q] Stuck - G Tablet General

I have searched the threads but I haven't found something similar and if there is I apologize and point me in the right direction.
I have been running VEGAn Ginger Edition but decided to give Calkulins a try. Followed all the instructions and everything booted fine. I used it for a day then the next when I tried to boot the backlight turned on and nothing else. Tried going into CWM but wouldn't take. Tried turning it on and leaving it alone for a while but it didn't do anything. I plugged it into my computer to try NVFlash but my computer wouldn't recognize it. Any help would be much appreciated.

Hey I just want to probe a bit to maybe lend a hand... You say"it wouldn't take" in cwm what do you mean? What happens when you boot recovery?
Sent from my MB860 using XDA App

You may also want to try and hold down the power button for four or five seconds and try to 'force' a shutdown. Then try and turn it back on.

aver2one said:
Hey I just want to probe a bit to maybe lend a hand... You say"it wouldn't take" in cwm what do you mean? What happens when you boot recovery?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
When I hold the power button and the volume + button the backlight will turn on and it will not enter recovery mode. Only the back light will turn on, that is it

Zaphod-Beeblebrox said:
You may also want to try and hold down the power button for four or five seconds and try to 'force' a shutdown. Then try and turn it back on.
Click to expand...
Click to collapse
I tried that, but I wasn't for sure that it actually shut down so then I left it on overnight to drain the battery. This morning when I checked it the backlight wouldn't even turn on. I hooked it up to the charger and same thing, backlight only, won't be detected by Windows when plugged in.

ralien1983 said:
When I hold the power button and the volume + button the backlight will turn on and it will not enter recovery mode. Only the back light will turn on, that is it
Click to expand...
Click to collapse
ralien1983 said:
I tried that, but I wasn't for sure that it actually shut down so then I left it on overnight to drain the battery. This morning when I checked it the backlight wouldn't even turn on. I hooked it up to the charger and same thing, backlight only, won't be detected by Windows when plugged in.
Click to expand...
Click to collapse
Sounds like a softbrick!
NVFLASH to get back to stock,....then........ start over...
You will need windows/linux to be able to detect the GTAB via APX mode first.

tekrhino said:
Sounds like a softbrick!
NVFLASH to get back to stock,....then........ start over...
Click to expand...
Click to collapse
I thought I had to have the Gtab connected to my computer to NVFlash. If that is the case then my problem is that my computer will not recognize that the Gtab is connected.

ralien1983 said:
I tried that, but I wasn't for sure that it actually shut down so then I left it on overnight to drain the battery. This morning when I checked it the backlight wouldn't even turn on. I hooked it up to the charger and same thing, backlight only, won't be detected by Windows when plugged in.
Click to expand...
Click to collapse
ralien1983 said:
I thought I had to have the Gtab connected to my computer to NVFlash. If that is the case then my problem is that my computer will not recognize that the Gtab is connected.
Click to expand...
Click to collapse
You will need windows/linux to be able to detect the GTAB via APX mode first.

I have my Gtab plugged in to both power and USB mini. When I try to run nvflash_gtablet.bat it says there is no device connected. When I look at device manager there is no APX listed. What next?

ralien1983 said:
I have my Gtab plugged in to both power and USB mini. When I try to run nvflash_gtablet.bat it says there is no device connected. When I look at device manager there is no APX listed. What next?
Click to expand...
Click to collapse
You need to follow the instructions for NVFLASH.. they include instructions on how to get APX drivers working on your pc..

tekrhino said:
You need to follow the instructions for NVFLASH.. they include instructions on how to get APX drivers working on your pc..
Click to expand...
Click to collapse
Yes tekrhino is right you def need nvflash ...first fix the usb issue there's a ot of threads discussing how to fix usb issues like this http://forum.xda-developers.com/showthread.php?t=989320

Thanks everyone. Little user error made that harder than it should have been.

Related

[q] help! My phone wont do anything!

hey guys,
my phone litteraly wont do anything. i f*ed up some fonts using type fresh, then tried to restore using the odin3 downloader. i accidentally closed it, and now my phone wont boot up/react to any buttons pressed. any help? thanks guys!
had the same problem. i cant figure out how to even get odin working, it says one click but when i hook up it to odin it gives me a message that still doesnt tell me ****. i had to send my phone back for a new one and told them i used easyroot on the market bc i didnt know what it was and it sounded cool but now i know not to ever do that again that it messd up my phone. Praying to god that they dont charge my for anything
You should still be able to enter bootloader mode by turning phone off and holding down up/down vol and pwr simultaneously until boot screen flashes then release power button only
it wont even do that
open odin (use the stock one click version)
with the phone off (remove/reinsert the battery if need be) and not plugged in; hold vol. down and insert the usb cable (keep holding vol. down untill you see the download screen). this should put you into download mode and if you have the right drivers odin should recognize the phone.
I've stuffed my captivate on a few occasions and so far I have been able to use this method to get into download mode and fix it.
it wont do anything at all. it wont power on, show up in adb, anything... and stupid att wont do ANYTHING -_- oh well. any help would be appreciated!
Have any of you offering support to the OP actually had your phone in the described state? I've read a few posts where the phone is seemingly completely dead as the OP describes and no one says they've successfully recovered from that state. All I ever see is the same old button combinations/battery/usb shenanigans and statements of that should work and that the phone is unbrickable. I have personally seen a device that was behaving in such a manner and no combination of battery pulling, usb plugging, button holding, or tongue twisting would generate anything from the phone. The only thing the phone would do was get hot.
same here. Phone showed bright green screen...wasnt done with teh flash and said it was finished...now the nly thing I can get is power and hold the vlume up for some IRQ and hex stuff. I posted a questionthis morning but...serious. Vol up and down and any things else gives nothign but a black screen..battery out...back in anything..its torched.
Have you tried getting into download mode via the sdk?
Sent from my SAMSUNG-SGH-I897 using XDA App
daveshih said:
Have you tried getting into download mode via the sdk?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
when i plug it in, windows doesnt make any noises and doesnt recognize it, and when i use the "adb devices" command, nothing shows up.
daveshih said:
Have you tried getting into download mode via the sdk?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did you read the rest of the posts? The OP already stated several times that the phone does nothing. I realize that most people will say it does nothing or is "bricked" if it simply shows the "connect to computer" screen, but the OP has stated more than once that the phone shows nothing. Yes, everyone is trying to help, but simply repeating what has been said numerous times before doesn't help.
Has anyone actually recovered a phone that displays NOTHING? No logos, no recovery, no nothing.
Last night, i turned off the light in my room when i noticed a glowing from my desk. i walked over, and it turns out my captivate's screen was in fact on, it was just a faint black glow, and none of the power buttons would do anything. when i took the battery out, it shut off completely!
As I pointed out here
http://forum.xda-developers.com/showthread.php?t=757293
Im pretty sure it was my fault for not completely following instructions on the ext4 one click install root, settings.db etc so everyone needs to make sure if the dev says flash before..do it.
State of the phone was, it would not completely power on..therefor no usb drivers would load and Odin cannot see the phone and it can no longer flash..the only thing I could get it to do was show a screen with that text. I put in my post. I ordered it via letstalk.com so I sent it back and assuming they get the same result Ill have a new one hopefully by the end of the week. Im just glad I stil had my old iphone3 to slap my sim card in.
The odin one click flash thing..it just flaked right at the start it looked like..but I cant be sure because as soon as I saw a blue progress bar I stepped into the kitchen for abtou 30 sec..I came back and the screen was florescent green and Odin said it was done. I knew something was wrong as it was way too fast so I unplugged, removed the battery and set it back in...from there on out it would do nothing with the power button unless on a semi rare occasion if I hit the volume up button and power I got the IRQ stuff.
Annoying as I had a nandroid backup just before I started messing with it.
i just sent mine into samsung... back to mah ol trusty blackjack. gonna have to get used to supermario bros 3 instead of spyro....
ANYWAYS theyre sending me a new one!
uiskibum said:
open odin (use the stock one click version)
with the phone off (remove/reinsert the battery if need be) and not plugged in; hold vol. down and insert the usb cable (keep holding vol. down untill you see the download screen). this should put you into download mode and if you have the right drivers odin should recognize the phone.
I've stuffed my captivate on a few occasions and so far I have been able to use this method to get into download mode and fix it.
Click to expand...
Click to collapse
So, yes in same state as op... no nothing... couldn't get jack out of it. at all, none
what this post said worked.... not holding power button... nothign...
removed battery
plugged in battery
hold vol down
(still no response)
plug in usb cable and continue holding vol down.
it went to recovery mode
... no holding of power button, just vol down and plugged in USB... give it a shot man, let me know
EDIT: feel free to PM me if you want me to help walk you through it...
ace518 said:
So, yes in same state as op... no nothing... couldn't get jack out of it. at all, none
what this post said worked.... not holding power button... nothign...
removed battery
plugged in battery
hold vol down
(still no response)
plug in usb cable and continue holding vol down.
it went to recovery mode
... no holding of power button, just vol down and plugged in USB... give it a shot man, let me know
EDIT: feel free to PM me if you want me to help walk you through it...
Click to expand...
Click to collapse
Hey thanks, but i already sent it to em... thank you everyone for your help!
Just a note... i said before hold vol down and plug in usb. I had it in a pretty bad state tonight. Played around. Same idea as before, but had to hold vol up and vol down. If i brick a few more times, i'll give a better guide. But this phone can DEFINITELY come back from a state where you can't even get it to power on. Figured any additional info on this would be good.

[Q] have I hard bricked my phone?

I think my phone may be hard bricked.
I was trying to follow the steps in http://forum.xda-developers.com/showthread.php?t=1141550, when I ran into the situation I'm now in.
I followed all of the steps perfectly with the exception of rebooting to recovery, I accidentally rebooted normally. After it had started up and sat for about 5 minutes or so, I rebooted back to recovery. I reflashed the ext4 zip, then Black Ice ROM, and then Bali 3.1. I went to the voodoo menu and disabled both options and told the phone to reboot again.
It sat at the SGS4G screen for 20 minutes and I never heard linda speak during this entire time. I got tired of waiting and pulled the battery. Now the only thing I ever get is the SGS4g screen. I let it sit that way while I slept and when I woke up 3-4 hours later it was still on that screen. I've tried following the advice given in the thread mentioned above to put it back into download or recovery with no luck.
When I connect the phone to the PC instead of recognizing it, it complains about it and immediately makes the USB disconnect sound. If I leave it plugged in every 5-10 minutes or so it'll pop up the warning in the system tray again, and make the USB disconnect sound. If I unplug the phone from USB, the battery charging screen stays on. If I plug back in to USB at this point it'll make the sound like it's connected but never shows in Windows device manager, 'adb devices', or in ODIN. Any ideas before I call it a hardbrick and try to take it back to the store?
chadder said:
I think my phone may be hard bricked.
I was trying to follow the steps in http://forum.xda-developers.com/showthread.php?t=1141550, when I ran into the situation I'm now in.
I followed all of the steps perfectly with the exception of rebooting to recovery, I accidentally rebooted normally. After it had started up and sat for about 5 minutes or so, I rebooted back to recovery. I reflashed the ext4 zip, then Black Ice ROM, and then Bali 3.1. I went to the voodoo menu and disabled both options and told the phone to reboot again.
It sat at the SGS4G screen for 20 minutes and I never heard linda speak during this entire time. I got tired of waiting and pulled the battery. Now the only thing I ever get is the SGS4g screen. I let it sit that way while I slept and when I woke up 3-4 hours later it was still on that screen. I've tried following the advice given in the thread mentioned above to put it back into download or recovery with no luck.
When I connect the phone to the PC instead of recognizing it, it complains about it and immediately makes the USB disconnect sound. If I leave it plugged in every 5-10 minutes or so it'll pop up the warning in the system tray again, and make the USB disconnect sound. If I unplug the phone from USB, the battery charging screen stays on. If I plug back in to USB at this point it'll make the sound like it's connected but never shows in Windows device manager, 'adb devices', or in ODIN. Any ideas before I call it a hardbrick and try to take it back to the store?
Click to expand...
Click to collapse
Press and hold vol up and down and insert the usb cord that will get you into download mode..
You are at a softbrick.
RaverX3X said:
Press and hold vol up and down and insert the usb cord that will get you into download mode..
You are at a softbrick.
Click to expand...
Click to collapse
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
chadder said:
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
Click to expand...
Click to collapse
buy the download mode jig or make one.
chadder said:
I've tried pulling the battery and putting it back in so it's fully shut down before holding the volume keys and connecting USB. It makes the USB connect sound and quickly makes the USB disconnect sound, gets the popup in my system tray saying it's an unrecognized USB device and doesn't go to download or a yellow triangle screen. Doesn't appear in ODIN or 'adb devices'. I've tried it this way repeatedly since last night.
I've also tried waiting until it's on the battery charging screen to pull the USB cable. It stays on the battery charging screen even though it's obviously not charging anymore. I hold the volume buttons anyways and plug the USB cable back in, and it makes the connect sound but it still never goes to download mode. I've tried it this way several times as well.
I've put my phone into download mode many times before so I can't imagine my method is wrong, I'm not doing it any differently than I ever have before. It's just behaving strangely. I've never had it stick on the battery charging screen before when I unplug the USB cable...
Click to expand...
Click to collapse
check your pm.
Hey. I had the same exact problem. I couldn't get into download mode...and thus no odin. Look in the bible. There is a guide on how to get into download mode multiple ways. I used method 2. After that, follow the guide to flash using odin, also in the bible. hope you get it fixed.
Sent from my SGH-T959V using XDA Premium App
or u could try to reboot windows and see if you still get the usb error heaven forbid that it doesnt mess up lol
I had this exact same problem one day.... It is a soft brick i promise... I cant remember what i did to get into download but try everything you can. When i first flashed the bali 3.0 it did this too me. I was eventually able to get into download mode and reflash. Keep trying brother you will get it eventually get it.
Sent from my SGH-T959V using XDA App
farwek said:
I had this exact same problem one day.... It is a soft brick i promise... I cant remember what i did to get into download but try everything you can. When i first flashed the bali 3.0 it did this too me. I was eventually able to get into download mode and reflash. Keep trying brother you will get it eventually get it.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
HAH SUCCESS!! I finally got it into download mode by pressing ONLY vol down and power. Worked like a charm. Pressing both vol buttons is what was killing me. I got into download mode with Vol Down and Power, and then had to uninstall/reinstall my samsung drivers. Odin now sees my phone and I'm pushing KD1 as we speak. Thanks a million everyone. I love this forum. Thanks to all who helped.
chadder said:
HAH SUCCESS!! I finally got it into download mode by pressing ONLY vol down and power. Worked like a charm. Pressing both vol buttons is what was killing me. I got into download mode with Vol Down and Power, and then had to uninstall/reinstall my samsung drivers. Odin now sees my phone and I'm pushing KD1 as we speak. Thanks a million everyone. I love this forum. Thanks to all who helped.
Click to expand...
Click to collapse
You should probably flash KC1
Beefvvl said:
You should probably flash KC1
Click to expand...
Click to collapse
god people are still using that ginger release sigh wish it was gone.....
rootzrobot said:
vol. down and power means u were on gb bootloaders....and you most likely still are.
Click to expand...
Click to collapse
+1
[10chars]
RaverX3X said:
god people are still using that ginger release sigh wish it was gone.....
Click to expand...
Click to collapse
+1 on that. I wish penguin0609 would at least update the op of the issues with it or at least have mr clown close the thread and take the link out.

MT4GS Wont Turn On Help

Ok so my mytouch was charging on my computer then i went to check on a text message, the screen was black but i could see the backlight. So I assumed it was a normal glitch or something so i disconnected it and pulled out the battery, but it wont even turn on or charge now.
I did everyting
I took out the battery
I tried a different battery
I took out both the sim and the sd card
I tried to load on bootloader
I tried a wall charger
Nothing has worked!
Anybody got any ideas.
lifebound said:
Ok so my mytouch was charging on my computer then i went to check on a text message, the screen was black but i could see the backlight. So I assumed it was a normal glitch or something so i disconnected it and pulled out the battery, but it wont even turn on or charge now.
I did everyting
I took out the battery
I tried a different battery
I took out both the sim and the sd card
I tried to load on bootloader
I tried a wall charger
Nothing has worked!
Anybody got any ideas.
Click to expand...
Click to collapse
When you say "Wont even turn on or charge"...
Do you get a buzz when trying to turn on?
How long have you left it on charge?
Does your computer recognize it when plugged in?
Have you rebooted your PC since the issue started?
When you pulled the battery, did you also unplug the USB cable?
What happens if you take out the battery and while holding down volume + & - you plug into PC via USB?
Sent from my Nexus 7 using xda premium
GoPadge said:
When you say "Wont even turn on or charge"...
Do you get a buzz when trying to turn on?
How long have you left it on charge?
Does your computer recognize it when plugged in?
Have you rebooted your PC since the issue started?
When you pulled the battery, did you also unplug the USB cable?
Click to expand...
Click to collapse
There is no buzz because it wont even turn on.
It was on charge for about 10 minutes.
Yeah it does make an noise when i plug it in.
Yes.
And Yes
demkantor said:
What happens if you take out the battery and while holding down volume + & - you plug into PC via USB?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I hear the noise of something being recognized on my computer but nothing on the phone. Happens with or without the battery regardless.
Have you tried any adb commands?
adb reboot bootloader
adb reboot recovery
Sent from my SGH-T889 using Tapatalk 2
Sounds suspiciously like hardware, maybe main flex went bad and... well actually probably not as I think it would still vibrate. If you have debugging turned on and the proper drivers in pc the you can try a screen cast and see if you have anything, that or maybe some adb commands.
Also try another pc, one that it has never been connected to, see if drivers try to install
Sent from my MyTouch 4G Slide using xda premium
lifebound said:
There is no buzz because it wont even turn on.
It was on charge for about 10 minutes.
Yeah it does make an noise when i plug it in.
Yes.
And Yes
Click to expand...
Click to collapse
Ok. So it's not totally dead. (It's not necessarily recoverable, but it's not a full brick.)
A failed flex cable isn't out of the realm of possibility. You mentioned you were checking a text.
Did you open the keyboard, or hit the power button or trackpad?
GoPadge said:
Ok. So it's not totally dead. (It's not necessarily recoverable, but it's not a full brick.)
A failed flex cable isn't out of the realm of possibility. You mentioned you were checking a text.
Did you open the keyboard, or hit the power button or trackpad?
Click to expand...
Click to collapse
I Hit the trackpad i think. Once i pressed it i got an empty screen. I already tried using ADB commands but adb wont even recognize my phone once connected. I have tried refreshing the daemon servers multiple times still no detect. Its like out of no where i decided to die or something lol

[Q] Phone died, now won't boot

I have a nexus 5 that was rooted on stock rom. I have not made any changes recently to anything. I went to wake the phone and got nothing. I used vol down and power to get into bootloader. Selected start and then the phone sat on the google logo for 5 mins. I again tried vol down and power and it went off and now will not do anything with any button combo. I charged it overnight in case the battery was just dead. Nothing this morning. I then tried to plug it into the computer and it looked for drivers for QSUSB_BULK. Never seen this before. It also shows up in device manager and an unknown device with that same title. I assume that this is a "hard brick" but surprised it just came out of the blue... Is there any chance of saving the phone?
crazycd1 said:
I have a nexus 5 that was rooted on stock rom. I have not made any changes recently to anything. I went to wake the phone and got nothing. I used vol down and power to get into bootloader. Selected start and then the phone sat on the google logo for 5 mins. I again tried vol down and power and it went off and now will not do anything with any button combo. I charged it overnight in case the battery was just dead. Nothing this morning. I then tried to plug it into the computer and it looked for drivers for QSUSB_BULK. Never seen this before. It also shows up in device manager and an unknown device with that same title. I assume that this is a "hard brick" but surprised it just came out of the blue... Is there any chance of saving the phone?
Click to expand...
Click to collapse
Ah, that sucks! I'm a little confused though, because you said that the button combos do nothing now, but when you now plug it into the PC, it attempts to load different / incorrect drivers? Is the screen just black and it's trying to load the drivers still or...? Have you tried to manually load the drivers when it's showing the unknown device? Tried different USB cables and / or ports? I realize the phone is not acting correctly, but it's best to eliminate the easy things first.
I don't think its the screen, I saw it shut off then never do anything again. I have tried different cables and ports. The phone never booted back into android I know that much. Trying to load drivers or use nexus tool kit to look for adb or fastboot devices does nothing either.
I also do not get a light or anything on the screen when I plug in the charger.
Yea, I wasn't thinking it was the screen itself. I was just wondering if now the phone is "on" and attempting to load drivers, albeit incorrectly or not at all, and the screen was still dark/off? What computer OS are you using? I'm assuming Windows due to the unknown device error, but which iteration: XP/Vista/7/8/8.1? What is the error when you manually try to load the drivers - not with a tool kit? Have you tried another cord / USB port / PC? Like I mentioned earlier, it's obviously a phone issue, but sometimes just trying these different things can at least get it to load the drivers correctly where you could at least fastboot the system back to the phone.
Ok
You are on the qualcomm cpu strict mode.
Keep it like that for ten -15 minutes the battery will charge.
After that keep it plugued in and press the power button until you hear the sound that the device is disconnected.
After that vol down + power right after
Should work
Sent from my Nexus 5 using xda app-developers app
jsmasterx said:
You are on the qualcomm cpu strict mode.
Keep it like that for ten -15 minutes the battery will charge.
After that keep it plugued in and press the power button until you hear the sound that the device is disconnected.
After that vol down + power right after
Should work
Click to expand...
Click to collapse
Now this answer seems logical and only hope to me ....and
i also think that these nexus phones can't hard brick that much easily ...
Sent from my Nexus 5 using Tapatalk
crazycd1 said:
I don't think its the screen, I saw it shut off then never do anything again. I have tried different cables and ports. The phone never booted back into android I know that much. Trying to load drivers or use nexus tool kit to look for adb or fastboot devices does nothing either.
I also do not get a light or anything on the screen when I plug in the charger.
Click to expand...
Click to collapse
And there's your problem right there. You don't know what you're doing.
[TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
BirchBarlow said:
And there's your problem right there. You don't know what you're doing.
[TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
Click to expand...
Click to collapse
I was not doing anything with the kit other they try other option to get the phone back on. I have not even installed an app on the phone in amonth it was running fine and just shut off an died. I was not playing with things I don't know. You post was an absolute waste...
crazycd1 said:
I was not doing anything with the kit other they try other option to get the phone back on. I have not even installed an app on the phone in amonth it was running fine and just shut off an died. I was not playing with things I don't know. You post was an absolute waste...
Click to expand...
Click to collapse
Alright maybe I misunderstood what you did. Have you tried reinstalling the USB driver for fastboot?
BirchBarlow said:
Alright maybe I misunderstood what you did. Have you tried reinstalling the USB driver for fastboot?
Click to expand...
Click to collapse
Of course you misunderstood, you only read one FOUR words in the tread and made your judgement.
I am using Windows 7. I tried to update the google driver in the device manager in windows but it will not accept it for that device. It only shows up as QSUSB_BULK. I have tried different cables and different ports. I have not tried another PC yet. I am going to set one up and try it just to eliminate PC issues.
crazycd1 said:
I am using Windows 7. I tried to update the google driver in the device manager in windows but it will not accept it for that device. It only shows up as QSUSB_BULK. I have tried different cables and different ports. I have not tried another PC yet. I am going to set one up and try it just to eliminate PC issues.
Click to expand...
Click to collapse
Pretty sure your device took a dump on you. Rma is your only option.
jd1639 said:
Pretty sure your device took a dump on you. Rma is your only option.
Click to expand...
Click to collapse
That is pretty much what I am thinking!
crazycd1 said:
That is pretty much what I am thinking!
Click to expand...
Click to collapse
Hate to see it but it does happen once in awhile. Emmc probably failed
Try holding the power button only for 15 seconds this is like the fail safe of pulling the battery out since we can't do that
Sent from my Nexus 5 using XDA Premium 4 mobile app
DREWHAMM974 said:
Try holding the power button only for 15 seconds this is like the fail safe of pulling the battery out since we can't do that
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried holding for a minute many times. All button combos..
jsmasterx said:
Ok
You are on the qualcomm cpu strict mode.
Keep it like that for ten -15 minutes the battery will charge.
After that keep it plugued in and press the power button until you hear the sound that the device is disconnected.
After that vol down + power right after
Should work
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Also while plugged in it always shows in the device manager and I never get the disconnect while holding in the power button.

[Q] Nexus 5 Dead

Hi everyone, so yesterday I got home, and like everyday I dropped it on the wireless charger. After about 2 hours I took it and it has turned off itself and doesn't react to my button presses or anything. I tried holding Power, Power+Vol Up, Power+Down, Power+Vol up+Vol down, charged it overnight but it still doesn't work. Is there anything else left to do? (Bootloader is unlocked, twrp recovery + franco kernel and stock fw, it was working for like 2 weeks with no crashes).
If you've already tried holding the power button for 20 seconds it sounds like rma is the answer.
Does your computer recognizing your phone?
It does not, the phone isn't turned on, how could computer recognize it? (btw. The phone takes the power from the wall it seems, cause the power cord gives a noise when only it's pluged in without cable to the phone, then I can take it out, it still makes noise, and if i plug the phone into it, it stops making the noise)
Illiuminatum said:
It does not, the phone isn't turned on, how could computer recognize it? (btw. The phone takes the power from the wall it seems, cause the power cord gives a noise when only it's pluged in without cable to the phone, then I can take it out, it still makes noise, and if i plug the phone into it, it stops making the noise)
Click to expand...
Click to collapse
It can recognize a phone even if it's not turned on,as adb,and then you can flash recovery,kernel and etc,using fastboot commands.
So go to device manager and see if recognized as adb,if yes,you're good to go,and try to flash stock rom and recovery.
Also you can try to reboot into bootloader using fastboot reboot command.
Simonna said:
It can recognize a phone even if it's not turned on,as adb,and then you can flash recovery,kernel and etc,using fastboot commands.
So go to device manager and see if recognized as adb,if yes,you're good to go,and try to flash stock rom and recovery.
Also you can try to reboot into bootloader using fastboot reboot command.
Click to expand...
Click to collapse
It doesn't recognize it ( I thought it only recognizes it if it's in vol down+power or on :?
Illiuminatum said:
It doesn't recognize it ( I thought it only recognizes it if it's in vol down+power or on :?
Click to expand...
Click to collapse
Ah yes,my bad,sorry. Also,when you took,didn't you notice that it's hot or something like that? Because I've read on the internet that wireless charging can make devices to overheat.
Simonna said:
Ah yes,my bad,sorry. Also,when you took,didn't you notice that it's hot or something like that? Because I've read on the internet that wireless charging can make devices to overheat.
Click to expand...
Click to collapse
Yes, 2 times it was hot, but not yesterday. When I took it, it wasn't cold or hot, the same as normal phone would be.
Oh, and one more thing. When I hold power button it makes noise like this: h\ttp\s://w\ww.dropbox.c\o\m\/s/d3e0rqtlzm7x2ig/N5noise.mp3 (Remove all the \ from the link)
Barely hearable so I just accidentally noticed it.
Anyways, I'll go for the RMA. One more question, I really doubt it's possible but I will ask. is there a way to transfer all files from the phone if it's not responding to anything?
Illiuminatum said:
Anyways, I'll go for the RMA. One more question, I really doubt it's possible but I will ask. is there a way to transfer all files from the phone if it's not responding to anything?
Click to expand...
Click to collapse
Nope, that's part of the package.
if at least ADB was working you could but not possible unless LG revive the phone.
GUGUITOMTG4 said:
Nope, that's part of the package.
if at least ADB was working you could but not possible unless LG revive the phone.
Click to expand...
Click to collapse
Can you ask Google when RMA'ing to try to restore the stuff from the phone?
Illiuminatum said:
Can you ask Google when RMA'ing to try to restore the stuff from the phone?
Click to expand...
Click to collapse
You can ask anything, but don't hold your breath
Do I need to worry if my phone has unlocked bootloader and is rooted? (I mean will RMA go ok?)
Illiuminatum said:
Do I need to worry if my phone has unlocked bootloader and is rooted? (I mean will RMA go ok?)
Click to expand...
Click to collapse
If your sending it to google, then you don't have to worry. However, your device is fully dead, right? They will most probably swap the mobo or just send you a refurbished piece.
vin4yak said:
If your sending it to google, then you don't have to worry. However, your device is fully dead, right? They will most probably swap the mobo or just send you a refurbished piece.
Click to expand...
Click to collapse
It's making some kind of a noise when trying to turn it on/charge it, and doesn't react any other way, so yea, dead.
Illiuminatum said:
It's making some kind of a noise when trying to turn it on/charge it, and doesn't react any other way, so yea, dead.
Click to expand...
Click to collapse
No worries! Good luck with the RMA!
Do keep us posted!

Categories

Resources