After doing a manual root, the Thunderbolt connects to LTE fine but when there is no LTE, the 3G won't connect and the phone doesn't receive data.
Advice?
Try checking to make sure you are not in LTE only mode. Dial *#*#4636#*#*, select phone information, scroll down and go down and make sure you are on the CDMA + LTE/EvDo auto option and not LTE mode.
If that doesn't work, try downloading "reset connections" from the android market and running that app when you enter a 3g area out of 4g range. It may be a handoff issue from 4g to 3g towers.
##778# hit dial, edit mode, password is 000000, modem settings, Rev. A, change to enabled, instead of eHRPD, hit menu, commit changes.
try 3G again.
I assume like me, you are in a section where Verizon's Hybrid Network isn't working, and so you must tell your phone to revert back to their regular 3G network.
We have 4G in Pittsburgh, but there's a spot in Squirrel Hill that I go through on the bus in the morning where I drop to 1x, and I'm fairly certain that there is 3G there. However, there are other areas I've definitely seen 3G. So, it seems a little mixed. We're definitely early adopters of this new network
The fix
Phone ##778, edit mode, 000000, modem parms, REV-A change from ePHRD to enabled, menu, commit, reboot, problem fixed.
seems to have worked for me. I was having a problem with syncing too, hopefully this fixes that as well. Thank you!
madman34 said:
Phone ##778, edit mode, 000000, modem parms, REV-A change from ePHRD to enabled, menu, commit, reboot, problem fixed.
Click to expand...
Click to collapse
Not to familiar with TB verizon, but friend bought his TB and I saw there was 4GLTE on it, and now nothing, no icon not in wireless networks, nada!
What is this "fix" for?
Related
The thunderbolt had this and it was nice.
Basically when I'm at work I'm in a fringe 4g area. If I leave the phone in 3g/4g auto mode then it constantly switches between the two and it destroys my battery. Not only that but it makes 4g basically unusable for me as it never stays on long enough to do anything with it.
On the thunderbolt by going into the phone info settings you could select LTE only mode.
On the Charge you only have the options of going CDMA only or CDMA/LTE auto. There is no LTE only option.
Is this something that can be corrected by an app or rom or kernel or is it built into the radio software?
I used the phone info app that worked great on the thunderbolt and on the charge it just comes up with a bunch of options like WCDMA only, GSM only and such and as far as I can tell none of them actually do anything.
Hopefully someone knows the answer to this because I like tethering to my tablets at work but if I can't have consistent 4g then I'm gonna be forced to return to my tbolt which is a shame because I like this charge alot better.
I haven't pucked up a Charge yet, but most Sammy phones let you for some fine grain tuning if the radio and other system settings via a menu accessed by a dialer code.
You could try *#*#197328640#*#* (is debug mode) and dig in from there.
Sent from Thunderbolt
distortedloop said:
I haven't pucked up a Charge yet, but most Sammy phones let you for some fine grain tuning if the radio and other system settings via a menu accessed by a dialer code.
You could try *#*#197328640#*#* (is debug mode) and dig in from there.
Sent from Thunderbolt
Click to expand...
Click to collapse
Already tried that, it doesn't work on the charge. It just dials and you get the "Welcome to Verizon wireless, your call cannot be completed as dialed" message.
I believe if you go settings ->wireless and network->mobile networks->system selection change it to CDMA mode will disable LTE.
you can try dialing "*#*#4636#*#*" that takes me to a hidden menu on the thunderbolt. If it works, from that menu select "phone Information" then select LTE only. or if you want to disable 4g (Helps battery in non 4g areas) you can select "CDMA auto(prl)"
thetwiztidfreak said:
you can try dialing "*#*#4636#*#*" that takes me to a hidden menu on the thunderbolt. If it works, from that menu select "phone Information" then select LTE only. or if you want to disable 4g (Helps battery in non 4g areas) you can select "CDMA auto(prl)"
Click to expand...
Click to collapse
Beat me to it
Sent from my ADR6400L using XDA Premium App
Thanks but did you guys even read my original post?
For starters, I'm not trying to disable LTE... I'm trying to force LTE only.
Secondly, as I previously said, This phone does not have the same radio options that the thunderbolt does. There is no option for LTE only. I understand the difference between CDMA auto PRL, CDMA/LTE auto and LTE only. THE PROBLEM IS THIS PHONE DOES NOT HAVE AN LTE ONLY OPTION!
I tried the phone info app that works on the thunderbolt, the only options are all for WCDMA only, GSM only and CDMA only and various combinations of them. There is no LTE only. Besides, none of the options present in that menu actually change anything, only the 2 that are built into the wireless network settings do (CDMA only and CDMA/LTE Auto).
Not trying to be a **** but if you're gonna post something to try and answer a question or help someone at least make sure you read the question.
In the same boat as you. I actually get decent service on LTE at home, and virtually nothing on 3G... go figure, but it keeps trying.
navycow said:
In the same boat as you. I actually get decent service on LTE at home, and virtually nothing on 3G... go figure, but it keeps trying.
Click to expand...
Click to collapse
i have the same problem as both you guys and this is so frustrating. when its connected to 4g i get between 8-10mb down. i also have a samsung mifi hotspot for verizon and it shows a strong 4g signal and gets over 10mb down consistently in the very same location.
i have no idea why my droid charge keeps switching between 4g and 3g. the funny thing is the only reason i really mind is because the 3g signal is horrible. if i was getting 2mb down on the 3g like i have seen at other locations i wouldnt mind at all.
yeah i have the same issue as well, i'm really not even sure what it's testing to decide to switch from 4g to 3g, i live about 100 yards from the verizon tower i'm connecting to and have full reception on both 4g and 3g but yet it still switches randomly between the 2, we really need a way to disable 3g
Sent from my Xoom using XDA Premium App
Still nothing on this front? I'm afraid I'm gonna have to return my charge tomorrow then =(
No LTE only mode = no 4g for me.
I already did and canceled Verizon, I'll have to stick with sprint. I really loved the charge, and wanted to keep it and stay with Verizon , but my evo gets a full 4g signal both at home and work. Too bad, the charge was an awesome phone
Sent from my SPH-D700 using XDA App
It actually seems to be the way android handles 4G, either on purpose or just coincidentally.
I have the same issue at work with Sprint, 4G gives me 2-3 bars but there is NO 3G, but it turns 4G off when the screen is locked, so it sits there trying to get backups in 3G all day, spare parts lets you force wifi to stay on, surely there should be a similar switch for 4G a dev could find.
Any luck on this issue here? I have a feeling I'm in a fringe area where it could potentially switch me between networks quite often...
Is it safe to assume that an LTE-only option is impossible unless Samsung does something to enable this functionality out of their LTE chip (CMC220)?
Any updates on a LTE/4G only option?
I found out how to force LTE Only ...
Warning! If this bonks up your phone, don't blame me!
Use at your own risk!
Now that we got that out of the way, here is what I have found:
Enable the Hidden Menu option by entering the following code in your phone dialer: *#22745927
Enter an SPC of: 000000
Select: Hiddenmenu Enable
Select: OK (Your phone may reset after this)
To get to the "Force CMDA/LTE/Global" menu, enter the following code in your phone dialer: **583
If you press the LTE button, you will be fixed on the LTE network.
Reset your phone
Taaa-daa!
Note: You apparently need connectivity to the CDMA network to make phone calls & text messages (Thanks, chaoscentral!) Oh, well ...
To reset back to the normal LTE/CDMA automatic selection mode:
Go to the "Force CMDA/LTE/Global" menu by enter the following code in your phone dialer: **583
Press the CDMA button, which will re-enable your phone to default to the CDMA network.
Reset your phone
When your phone boots back up, go to: Settings >> Wireless & network >> Mobile networks >> System selection >> LTE automatic
Cheers!
just keep in mind LTE only mode means no phone calls or text messages. since those go over CDMA
Ah, I should've guessed they would make the phone code for this hidden menu option "LTE". Now I wish there was a way to only disable EV-DO 3G (leaving CDMA intact for phone calls/texts). Can't have it all I guess...
Thanks for this regardless!
PeterDLai said:
Ah, I should've guessed they would make the phone code for this hidden menu option "LTE". Now I wish there was a way to only disable EV-DO 3G (leaving CDMA intact for phone calls/texts). Can't have it all I guess...
Thanks for this regardless!
Click to expand...
Click to collapse
Yep. I tried goofing around with a few different options on the "LTE" theme, but nothing came up.
Then, I realized that I had loaded new ROMs since the last time I had enabled the Hidden Menus option, and figured out that my Hidden Menus were no longer enabled. Once I re-enabled the hidden menus, I tried *#LTE#* (which didn't work), and then **LTE, which did.
BTW, for anyone that has had problems making phone calls after following my original settings, I have updated the post on to how to get back to automatic LTE/CDMA.
Also, has anyone tried that **583 "Global" option yet? Verrrry Interesting!! (But, spooky!)**
Ain't messin' with your phone fun?
** Anyone who gets this reference wins one "Bippy".
Dial *#*#4636#*#* go into phone information scroll down and choose wcdma only and your done default is GSM/WCDMA auto (PRL)
samsungcaptivates said:
Dial *#*#4636#*#* go into phone information scroll down and choose wcdma only and your done default is GSM/WCDMA auto (PRL)
Click to expand...
Click to collapse
please excuse my ignorance, but what would be the purpose of this?
so that it dosent jump around from 3g 2g if its auto and your not using data it automatically defaults to 2g i think to save battery then switches to 3g oir hsdpa 3.5g or what att calls 4g on demand this keeps it locked on wcdma or 4g to my knowledge
samsungcaptivates said:
so that it dosent jump around from 3g 2g if its auto and your not using data it automatically defaults to 2g i think to save battery then switches to 3g oir hsdpa 3.5g or what att calls 4g on demand this keeps it locked on wcdma or 4g to my knowledge
Click to expand...
Click to collapse
seems like it reverts back to auto after a reboot
This makes the phone work on Verizon, right?
MikeyMike01 said:
This makes the phone work on Verizon, right?
Click to expand...
Click to collapse
See that's what I thought too. ATT = GSM, Verizon/Sprint = CDMA.
kwaalude said:
seems like it reverts back to auto after a reboot
Click to expand...
Click to collapse
Mine goes back to auto as soon as I back out of the menu. Am I doing something wrong by using the back button?
wouldn't this, by locking it, render the phone useless when traveling out of area that support that network?
MikeyMike01 said:
This makes the phone work on Verizon, right?
Click to expand...
Click to collapse
roflmao 10char
vbanh said:
Mine goes back to auto as soon as I back out of the menu. Am I doing something wrong by using the back button?
Click to expand...
Click to collapse
Mine does the same thing. did you figure out how to do it? I have been trying but I couldn't do it
I found this here in the forum someone posted and it worked for me thanks for him.
champoux said:
Here's an alternate method I puzzled out (and then afterward discovered it was already posted in thread 751237. It's a bit faster and has the advantage of surviving flight mode; still gets reset upon restart.
Dial *#*#2263#*#* (mnemonic: *#*#BAND#*#*).
This brings up the Band selection menu which you can also access from the above method by dialing *#*#197328640#*#* then going into DEBUG SCREEN > PHONE CONTROL > NETWORK CONTROL.
Select [3] GSM BAND
Select [1] GSM ALL
Select "Select GSM All Bands"
Menu key > END
To switch back, go to *#*#2263#*#* and select [1] AUTOMATIC > Select GSM &WCDMA All Bands > Menu key > END.
Something else I'm trying out is switching the acquisition order so when it is in "dual" mode, it'll try GSM first. Even so, it will still switch to 3g if there's enough signal. Seems to help keep it on 2G though, when it would otherwise cling to a faint 3g signal with 0-1 bars.
To do that, go into the NETWORK CONTROL menu (see above) then
Select [4] AQUISITION ORDER (yes they misspelled it)
Select [2] GSM->UMTS
Select "Select ACQ_ORDER_GSM_FIRST" (at least they abbreviated it correctly)
Menu key > END
This option does not get reset upon phone restart.
Click to expand...
Click to collapse
I did this and now my sms or text messaging don't work help
I had this happen too, but I didn't use the above method. Don't know what happened, but when I checked message settings, I had no number under "Message Center" did a quick google search and found an ATT number "+13123149810"...now it works again.
Did u call the number
Never mind i fixed it.but now in my network type it says umts is that faster then hsdpa and are there any other number sequences i can use to tweak my phone
I'm getting RAT restricted, which I got on my Vibrant but never my Captivate...
How can I change to show the different bands?
Sent from my Samsung Infuse 4G
wcdma and cdma have nothing to do with each other. wcdma is also known as umts, the base part of 3g (and 4g when hspa+). hspa is a protocol that runs on top of this cell technology providing higher data speeds. gprs (known as edge, and some times called gsm) is 2g. you can turn one or another off so the phone does not seek and connect to both services, which could save battery life. even though ive yet to see my phone find less than 3g/4g in houston, i still dont turn it off, just in case.
The Jack of Clubs said:
wcdma and cdma have nothing to do with each other. wcdma is also known as umts, the base part of 3g (and 4g when hspa+). hspa is a protocol that runs on top of this cell technology providing higher data speeds. gprs (known as edge, and some times called gsm) is 2g. you can turn one or another off so the phone does not seek and connect to both services, which could save battery life. even though ive yet to see my phone find less than 3g/4g in houston, i still dont turn it off, just in case.
Click to expand...
Click to collapse
Thanks, John Madden.
I'm on bamf soab 1.03 and I dont think anyone else is habing this problem but I'm wondering if anyone knows how to fix this issue. When I get 4g signal the phone will use it but won't use 3g. It drops out of 4g and then just stays without data. So basically its only using 4g or else its just not connecting to 3g. There is no data problem in my area because people I live with are getting 3g just fine....any ideas?
Menu > Settings > Wireless & Networks > Radio Info > Change LTE only to CDMA/LTE mode
if you don't have the radio info option there, download LTE toggle from the market and do the last step.
heh. i tried out the new 1.03 and market just kept crashing on me(even after force stopping/clearing data) and uninstalling updates. so i just thought "to hell with it" and switched back over to shiftao3p
No such setting as LTE only. And my phone has always been on LTE/cdma so its not that I already checked that. I'm not a noob user.
do you have EHRPD on under modem settings in ##778? It should be. Past that I sometimes reset if it has issues locking on to one and that will resolve. That's all for my ideas, though I'm still on SOAB 1.02
johnchad14 said:
do you have EHRPD on under modem settings in ##778? It should be. Past that I sometimes reset if it has issues locking on to one and that will resolve. That's all for my ideas, though I'm still on SOAB 1.02
Click to expand...
Click to collapse
This is what i was going to suggest. Here's some information that might be helpful. I've found that with the network testing and stuff the past few weeks in my area, sometimes revision a enabled is better, sometimes eHRDP works better. Try switching revision A and see what it does.
Try dialing ##778# on your phone, hit call if you need to.
Choose edit mode
Password is 000000 (six zeros)
Choose modem settings, go down to revision A, and change from e HRDP to "enabled"
Press menu and commit modifications, phone will reboot.
After it settles you may need to go to *#*#4636#*#* and choose phone info then change your preferred network settings to get a solid signal.
Sent from my ADR6400L using xda premium
I was messing with it last night and seems that the issue is fixed if it happens again ill follow those steps. I'm a pretty advanced user but I'm not so familiar with those settings so thanks for the help
Sent from my ADR6400L using XDA App
I'm running a version of 2.11.605.3, de-bloated and rooted.
I lost 3G on October 21st. I would either get 4G, or nothing. On occassion, I would get 1x. Selecting CDMA only gives me NO data
If I change the REV-A option under the ##778# menu from EHRPD to enabled, the 3G comes back and the toggling between 3G and 4G works fine.
Switch back to EHRPD and 3G goes away. Seems like the problem is with EHRPD. I don't know why all of a sudden it stopped working correctly and I don't have enough tech skills to identify the possible cause.
VZW has had trouble with their Data network the last two weeks, could be a VZW problem. I have not had any 3G problems on my phone and I am running SoaB v1.03 on my phone.
Sent from my Galaxy Tab 10.1
some time ago i set the phone to LTE in the testing menu to see what LTE networks it could see. it saw them fine but not for the network i use yet.
the thing is ever since then everytime the phone reboots it seems to default back to LTE only. soi have to ga back in to the test menue and set it back to LTE/ GSM to get the signal back.
Help! why is it still doing this and how can i fix it?
Go to Settings, More... under Data usage, Mobile networks, Preferred network type. Make sure the radio button for 3G is selected.
so i cant leave it on 4g preferred? 4g should be coming to my location in the next coulpe weeks so id not want that to be perminant.
or will setting it to 3g reset things?
ooooooh, did as you said rebooted, 3g locked on. sat back to 4g preferred and rebooted, 3g locked on.
yey! thanks, i dont get why it worked but much appreciated.
I really need help with my device, I searched all over XDA and no-one seems to have the same issue as me.
Here is some information:
1) Nexus 6P (H1511)
2) 6.0.1 Absolute stock, no rom, no root, no custom recovery. Build number MMB29P.
Recently got a new Nexus 6P and imported to Russia. All of the major bands here are supported. And the phone worked excellent for a few weeks, but then it lost all 3G or GSM connectivity. Just randomly,didn't do anything with it, the only thing I did is move to another city but than I got back, the issue didn't resolve. LTE works perfectly but can't call or receive calls, can receive sms though. Reseting network settings and factory reset changed nothing. Tried manualy set network to WCDMA or GSM with *#*#4636#*#* command, the moment I switch to anything besides LTE the connection is lost. Contacted the provider, no problem on their side, my SIM works good in other phones, my phone with other SIMs - no.
I don't think it is a hardware issue because a few times I managed to get everything working after an hour of switching networks and bands with no particular order in the *#*#4636#*#* testing mode.
After a while I figured that if I set phone to "GSM only" on USA bands in testing mode, but at the same time set it to "LTE prefered" in the normal network settings menu. I am able to set phone to Band mode 7 and set the network back to 2G in network settings keeping it on " GSM only" the whole time and only after this compicated algorithm and after a reboot 2G and 3G starts working. But any reboot after that revertes everything back to only LTE stage. Also if I get everything working but than reset network settings everything stops working again.
I have no idea what caused such an issue, I really hope someone can help.
Sorry couldn't post screenshots because of the "10 posts rule".