It seems, that these apps doesn't work (2.3.3 CM-RC3 HACKDROID Legend),why?
I'm looking for woking apps (need DSP with bass settings)
DSP doesn't change sound (equalizer not working).
LEDlight doesn't change led-notification colour.
Related
people who want stock like sound
enhancement on cm11 !
1st install this with cwm
http://forum.xda-developers.com/showpost.php?p=48165168&postcount=337
but may be you got issue like low sound and
something wired..
so install viper4android fx from here:
http://vipersaudio.com/blog/?page_id=48
and it's driver, activate it and disable DSP
manager and enjoy without any issue.. and
sound enhancement of stock will be work
without problem in cm...
I flashed SONY Walkman as stated. Updated it to latest version using apk file in apps/theme forum at Xperia L. Viper installed as well but SONY Walkman and Viper has no real connect with each other!
MY review about it all :
Sound is sometimes low and sometimes high on its own.
Sound is DISTORTED.
CLEAR AUDIO or any other sony function has no affect.
ROM has started to lag a bit.
NO difference in gain in headset volume.
I would suggest NOT to go through with this unless you have backuped your ROM first with nandroid.
Reflashing CM 11
AND if you miss albums/walkman other sony apps, just install apk but keep in mind the tweaks like clear audio wouldnot work
Hnk1 said:
I flashed SONY Walkman as stated. Updated it to latest version using apk file in apps/theme forum at Xperia L. Viper installed as well but SONY Walkman and Viper has no real connect with each other!
MY review about it all :
Sound is sometimes low and sometimes high on its own.
Sound is DISTORTED.
CLEAR AUDIO or any other sony function has no affect.
ROM has started to lag a bit.
NO difference in gain in headset volume.
I would suggest NOT to go through with this unless you have backuped your ROM first with nandroid.
Reflashing CM 11
Click to expand...
Click to collapse
bro i faced all of issue as you mentioned in post,when i flashed given link walkman and enhancement port...
and i was trying to resolve it... then i install viper4android fx, and it's driver at super quality sound...
and i enable v4a fx and force enable on headset mod...
set parameters in v4a app and disable dsp manager..
then i start walkman and all issues like low audio output,fluctuating of volume level and distorted sound all are solved and working loke stock ...for me is more thn stock...
clear bass also working when it's set at zero it have no bass and if i increasing the bass level also increase means it's working and bass effect is same as stock not like dsp manager...
equalizer and presets all are working ...also surround sound (vpt) working efficiently as works in stock ...
I'm enjoying real sound enhancement of stock sony not only music player in cm11... and i posted if people like to use sound enhancement same as stock... i found it's working for me so i share trick...I'm not developer....
Thanks :good:
it works 100%
Thanks Bro. You are Awesome.. It works 100%. Thank you so much...
Hi,
I've tested the built-in 'screenrecord' binary of CM11 and it works quite well but it lacks sound. Is there any solution/app that enhances this functionality with sound support? The new app 'mirror beta' just seems to provide mic audio that i don't want. I need system audio to record games and such. Any ideas?
Player Sony (updated through Google play), and system equalizer DSP + (compatible from player settings).
Archive removes from the system Dolby Atmos.
Please make a backup before installing the files.
After installing the files, clear the data Google play and reboot the device.
Link
@noskojv Good job,
With Vibe X3, I think we should not remove Dolby App, Without Dolby App, system will set the Dolby flag default as enable, and they will resample everything to 48 Khz.
If you don't like Dolby, you can just remove it in audio_effects.conf.
I checked : Viper , Maxxaudio, your DSP+ here. But ufortunately, nothing supports Hi-Res.
But I think Maxxaudio (Lenovo version with parametric equalizer give best sound - but with >96 Khz file, you need to set Min CPU freq about >800 Mhz
ctheanh said:
@noskojv Good job,
With Vibe X3, I think we should not remove Dolby App, Without Dolby App, system will set the Dolby flag default as enable, and they will resample everything to 48 Khz.
If you don't like Dolby, you can just remove it in audio_effects.conf.
I checked : Viper , Maxxaudio, your DSP+ here. But ufortunately, nothing supports Hi-Res.
But I think Maxxaudio (Lenovo version with parametric equalizer give best sound - but with >96 Khz file, you need to set Min CPU freq about >800 Mhz
Click to expand...
Click to collapse
There is always a choice
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Arise. Simple to use, great sound quality and a lot of customization.
There are many Arise editions but I find the attached one simplest to use.
Steps:
1. Flash the attached file (ARISE Sound Systems Deuteronomy 2.2.3 Mac 'n Cheese Edition FINAL) through TWRP
**For Android Oreo flash the included (ViPER4Android_2.5.0.4_Wonder_Wicked_Witch_12-Jan-2018.zip) file through TWRP instead.**
2. Reboot to OS
3. Install Busybox (https://play.google.com/store/apps/details?id=ru.meefik.busybox) from Play Store
4. Open the Busybox app and install busybox
5. Enter the Viper4Arise app
Done!
Next, you need to set up the sound mod.
*I only use Viper4Arise for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Arise's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi 4X are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.rar into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
wow your profile settings and irs file make the sound on my headset amazing ??? thx ?
How much sound difference between viper and a dedicated dac say dragonfly black?
Del 10char
Hi, i am looking for system wide parametric EQ for android that also works on built in speaker mode. I do have root access on my device and i already tried Viper4Android and JamesDSP but Viper4Android does not have parametric EQ and even it has convolution EQ as far as i know, i does not seems to be available in built in speaker mode. JamesDSP on the other hand, does not have parametric EQ either and even if it had, when i turn on JamesDSP on my device, it makes audio crack and stutter. I do have AudioModificationLibrary already installed on Magisk. I also tried Poweramp Equalizer on Google Play Store but it limits gain values to max 15dB which is not enough for me at least while equalizing my built in speaker. I could not find any solution yet on internet. Any help is appreciated!
bump. I'd like to know too.