A little direction... - General Questions and Answers

Hello Everybody!
It's been 3 days I am reading different discussion and threads. There is so much that it confuses me. If any of you pros can just redirect me to the resource which will full my need then please help me.
I have HD2 (Leo, T-mobile). I want to install Android on it but I don't want to lose WM6.5. I have been reading about installing Android SD card which seems like the option to work but still I have confusions in that.
Can you just provide me some or anything where I can follow the procedure and get Android install with disturbing my WM...
Thank you

There are plenty of SD builds for the HD2. You'll find the HD2 SD Android forum here: http://forum.xda-developers.com/forumdisplay.php?f=735&order=desc
If you like stock Android and not HTC Sense, I had a lot of good times with this particular ROM: http://forum.xda-developers.com/showthread.php?t=870518. It hasn't been updated for a while because more and more people are running it from NAND these days.
I'd recommend checking to see whether it's completely compatible with the TMOUS version (some ROMs aren't). Also, check a few out before settling on the one you like most, don't just take my word for it
Good luck, and welcome to XDA

I installed SuperRAM_Froyo_v1 on SD and it was working smooth. The next day I installed AmeriCanAndroid and it was also working fine. I kept switching back to WinMo. Just now when I tried to run CLRCAD or HARET it just says "The file 'CLRCAD' cannot open, etc etc".
I tried deleting the files and pasting again but it's just not working. Anyone been through such an issue?

I installed SuperRAM_Froyo_v1 on SD and it was working smooth. The next day I installed AmeriCanAndroid and it was also working fine. I kept switching back to WinMo. Just now when I tried to run CLRCAD or HARET it just says "The file 'CLRCAD' cannot open, etc etc".
I tried deleting the files and pasting again but it's just not working. Anyone been through such an issue?

Related

hero loads but then reboots to WM

hey i downloaded kaiser-hero-20-10-2009. i run the haret.exe and it loads. it goes into the hero and htc screen like its booting then reboots back to WM. does anyone know what it could be im lost right now.
Tips from little noob Joenie
Hey dude,
I am not sure what might be going wrong, yet, I do know a few checks:
- do you have the correct settings in default.txt? (see 1 of the many Android threats)
- did you download the latest basefiles and did you put them in the right folder on your SD card?
- some builds require extFS formatting, ensure that you have that or use another build
- does, for instance, the new ION or the newest Eclair build work?
I would like to help you further, since I love how Android can run on a Kaiser... However, I am still a bit of a noob... So I hope it helped, if not, feel free to ask additional questions... I am sure that the other Android devs can help you out then!

Best ROM for my Hero?

Hi guys,
am new to this whole rooting/ROM updating thing.
Would appreciate if someone could guide me to a good ROM for my HERO (currently running stock 1.5)...its an Eastern/Central European version (i.e. has language for Czech, Hungary, Poland etc) and has no market place.
Basically the ROM I am looking for should:
Give market ability
Android 2.1
Fast to use
Give a better/more practical contacts selection option...i.e. the fastest way to select contacts (bypassing having to go through multiple screens!)
Be generally cool and not make me want to buy a new android phone for the next few month!
would also appreciate instructions (or link to) for how to update the ROM.
thanks!
Raidroid seems happiest on my hero from the handful I tried so far
-------------------------------------
Sent via the XDA Tapatalk App
do you have a link where I can get it from (including instructions)?
thanks
I installed Fresh 2.1.2 a few days ago and am loving it! Looks slick and is fast.
I think in terms of speed, any of the 2.1 roms are great when the hero is overclocked (OC).
I had been using BeHero 1.2+ before the OC patch came out and it was occasionaly sluggish but after I applied the OC patch it is perfect now. LAGLESS
what i really need are links where i can download these things from...from whatever i've found, it seems to be through rapidshare.com which doesn't work...
Latest raidroid is here: http://www.multiupload.com/C54GAT6DLJ
thanks! finally found a site from your link that lets me d/load
Glad to be of assistance, is what we're all here for after all
Whatever ROM you install, I recommend that you install SpellDial to search for your contacts (it is free).
It gives you a T9-style search of your contacts. Type in the name on its telephone keypad and the you will usually get your contact listed within 3 to 4 key presses.
SenseUI already does this.
chachi said:
Glad to be of assistance, is what we're all here for after all
Click to expand...
Click to collapse
hello again
now that I finally downloaded this, I don't know how to install it!...
I have an unbranded Hero (i.e. not locked to any network)... do I still need to root my phone first etc?
where can I get instructions on how to install the ROM?
many thanks!
MNK78 said:
hello again
now that I finally downloaded this, I don't know how to install it!...
I have an unbranded Hero (i.e. not locked to any network)... do I still need to root my phone first etc?
where can I get instructions on how to install the ROM?
many thanks!
Click to expand...
Click to collapse
yup...you need root access to install ROMs. Google Search on how to unlock your version of the HERO. Good Luck!
What he said.
Google 'how to root HTC hero'
Basically:
allow 3rd party installs, dl and copy the Rom zipfile, flash backup/loading tool and the recovery image to SD, install the tool, run it, backup, then flash the recovery bin to the phone, power off, power back on holding home and power until the green on black text recovery screen comes up, wipe all, then flash from SD and select the raidroid zip
Will take a few mins to flash and reboot, reboot will take a bit longer than usual but that's it in a nutshell.
Good luck ...
ok.. so the day started off with trying to root my hero with the 'one click' unlocker...
finally d/loaded the program, ran it but it somehow couldn't find my android phone (on Win 7)...
wasted a couple of hours on above, then tried it on a WinXP machine... found phone no problem, ran the one-click unlocker and got an error while trying to 'update' (i.e. downgrade ROM)...
so then thought I'd give the 'goldcard method' a go...
followed instructions to the letter...got as far as trying to write the image on the SD card till when I pressed save (on the hex editor) and it gave me a 'cyclic redundancy error'...
not sure what the heck that means!... don't know whether it had anything to do with me not formatting the SD card when sticking it in my PC since WinXP said it needed to be formatted....
however, the instructions didn't say anything about formatting it!... tried to re-insert it and format it but don't get the format option this time....
SD card works fine in phone...
Don't know whether its to do with brand of SD card not being compatible with the 'goldcard' method (San Disk)... read that Kingston works... can't be asked with all the hassle and going out to buy a different one etc etc...
Hoping that a new ROM is released by HTC officially, soon!

[Q] Switch between OS on HD2 / uninstalling froyo 2.2 from hd2

Hi,
I am new to this forum. sorry if i repeat the question but I tried looking all over and I could not find any answer for my question, which is as follows...
1. If I experiment froyo 2.2 on my HTC HD2, how do i swith to and forth between Android (froyo 2.2) OS and Windows Mobile OS. Is it easy to do so?
2. If I don't like froyo running on my HTC HD2 because of technical difficulty, how do I switch back to original HD2 operating system, like I never tried Froyo installation (in other words - how do i completely uninstall froyo from the device)?
Sorry if I repeated the questions, but, again as I said, I could not found it on the forum.
Thanks
It actually just runs from the memory card so basically you just have to restart the phone, let it load windows mobile then delete the android mobile on the sd card. Below is the section for android roms basically just download and unzip to your sd card in an "Android" folder there might be more to it, but there is a thread with instructions too.
http://forum.xda-developers.com/forumdisplay.php?f=735
I had the same question and searching for the answer has led me to your post. I understand that the Froyo system files reside on the SD card but I'd imagine some sort of startup file on the phone itself has to be modified to point the boot sequence to the SD card. Is that correct and if so, what file(s) is modified on the phone? More specifically, I'm researching the Froyo install and want to do it without any custom ROMs, just stock, but I'd like to make sure I can remove all traces should I need to send it in for warranty purposes.
abc12121, did you get any more information on this that you could share? Can anybody else explain what, if anything, is modified on the phone to point to the Froyo install on the SD card? Or how the boot process works?
Thanks!
Superram Froyo not loading
I recently installed Superram Froyo from Darkstone on my HD2. It worked absolutely great for a day. Then all of a sudden, it stopped loading. I tried to repeat the process of booting but all it does is shows the green HTC logo and then the screen goes dark...and stay that way. Any advice or help is appreciated since I was begining to really enjoy it.
Regards

[Q] Problem SDcard and Apps [XDAndroid FRX06]

Hello,
I have a HTC Touch Diamond 100 and I installed the "Froyo FRX06 XDandroid NEW system update" review in the post "[prj] [XDANDROID] [AOSP] [FroYo | GINGERBREAD] [31.03] System Update" and everything works fine except that it doesn't recognize SDcard applications.
There's no Error Message in the screen, is just that the system doesn't recognice anything in the SDcard. I put my apps in the folder: AndroidApps-> Other. I think it's not the common fault that I have read many people have "Waiting for SDCard error. For people who have problems with sdcard message, add this to your startupmsmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave" because for instance the phone let me save the pictures i've take with the camera phone or install and recognice any app from the market.
I 've Format the card with the HP tools after initial installation and then i had restore all the files in the internal storage.
P.S. Sorry for my possible spelling mistakes but English is not my native language
Keep in mind if you put the apk in anything other than the AndroidApps folder you will need to install them yourself. See THIS FAQ for further explanation. As far as the wating on sd card message you get when you are booting into Android, I get those all the time and have no problems with taking pictures. I would suggest that you use the full bundle from THIS post to ensure you have the latest. Unless you know what you are doing
R^7Z said:
Keep in mind if you put the apk in anything other than the AndroidApps folder you will need to install them yourself. See THIS FAQ for further explanation. As far as the wating on sd card message you get when you are booting into Android, I get those all the time and have no problems with taking pictures. I would suggest that you use the full bundle from THIS post to ensure you have the latest. Unless you know what you are doing
Click to expand...
Click to collapse
Oh what A noob mistake xD I didn't know that apps in the "Other" folder doesn't follow the "typical rules" for instaling apps (i've come from previous releases of Android, Eclair specifically, and in that version it was only place in this folder to install apps).
I'm using froyo instead of gingerbread builts because HTC touch Diamond it's quite old and i don't know if the performance would be better or slower than froyo performace but if you recomend me to use that gingerbread bundle i would use it.
Thanks R^7Z.
Honestly, Gingerbread is "better" but it is alpha release at the moment. Yes, this means that there are quite a few more "improvements" to under-go! I only recommend it if you like the idea of Android. The latest releases for FroYo aren't bad but it seems there are a few hard instability hits it has taken since FRX03 (last time I really enjoyed running a FroYo build from the XDAndroid project). Since then, I've been playing around with a few things and builds to include but not limited to this new idea of CWM (clockwork mod/Gingercherry tutorial) which is posted in the neopeek forums. So, unless you've got an idea as to how neopeek variants work, it's suggested to stick with the XDAndroid builds...
R^7Z said:
Honestly, Gingerbread is "better" but it is alpha release at the moment. Yes, this means that there are quite a few more "improvements" to under-go! I only recommend it if you like the idea of Android. The latest releases for FroYo aren't bad but it seems there are a few hard instability hits it has taken since FRX03 (last time I really enjoyed running a FroYo build from the XDAndroid project). Since then, I've been playing around with a few things and builds to include but not limited to this new idea of CWM (clockwork mod/Gingercherry tutorial) which is posted in the neopeek forums. So, unless you've got an idea as to how neopeek variants work, it's suggested to stick with the XDAndroid builds...
Click to expand...
Click to collapse
I see what you say but honestly, right now, I'm looking for stability and performace, if you know that gingerbread build GBX0A have better performance (i supose that it's less stable because it's an alpha) than FRX06 i'll choose Ginger
Thanks again R^7Z.

[Q] HTC Touch diamond - Fully working Android version wanted.

Hi all,
I am not starting this thread without doing my research.
I have installed few android versions (some will install and some won't). And the one I was able to install were not fully functional. They were either alpha or beta versions.
I can do with either 2.1, 2.2 or 2.3.
Can someone please tell me if there is a version out there that I can install and work perfect or near perfect on my HTC Touch Diamond?
I have been trying to search this forum and everytime I come accross a perfect version, it won't load on my phone. I am not sure what am I missing.
Hope someone understand where I am coming from.
I can describe where I am getting stuck etc as well.
Cheers
SB
stuck
I have just installed FroyoBV6
1. my device is: HTC Diamond
2. I'm using kernel: Default from Froyo B-V6
3. I'm using Ver: Froyo B-V6
4. the problem is: my phone is not going past the initital animation. I have rebooted and ran Haret.exe several times now.
Any ideas..????
I want a version that can let me use -
- WiFi
- 3G
- Camera
- 2G
- Market
- downloading on my SD card...
- GPS/Google map
Anyone who has tested or is still using anything similar to this on their HTC touch Diamond, please let me know...
Have either of you checked out this thread for known issues?
http://forum.xda-developers.com/showthread.php?t=1178546
A Small Query Regarding Andriod Installation on HTC Touch Diamond
Hi All,
I have a small query.
I am trying to install Andriod on my HTC touch diamond after reading from threads, the query is that where exactly i have to dump the extracted files. what is meant by "Internal storage"
If i place it in Internal storage i.e the 4GB one and try to run "haret.exe" its says that "cauld not read trailer"
and if i am trying to place it in the root folder i.e "my device" in parallel to "windows", "program file" etc its says not enough disk space. when i checked the memory available its less and data is larger... and just to be clear that HTC is not having data i already did a hard reset and removed my all data.
can you please help me.
Thanks!!!
small problem
i downloaded xdandroid for htc touch diamond...but while booting it shows "cannot find rootfx file on sd card,extracrt it"
but when i try to extract in mobile r laptop it shows...operation failed,i used many software to extract but no use...
pls tell me how to extract it...??
thanks..

Categories

Resources