Help. Please. - HTC Inspire 4G

My phone is stuck in a bootloop, and I can not get into clockwork and my phone won't flash a rom! It always just says parsing... and goes back to the menu. Recovery goes to a fading black screen. How do I fix this thing? None of the other posts are descriptive enough or actually worked.

So you can't even get into recovery?
Are you familiar with ADB?
If not just google it and see if that helps any.

I'm pretty green myself, but if you hold the down volume and power can you get to hboot? If you can, put the stock rooted PD98img.zip file on you sd card. Go to hboot. Select recovery and see if it can find that file on your zip card. That should get you back to stock rooted (You are rooted I'm guessing). From there you should be able to flash a back up or a new ROM. Again, I'm a noob too, but that worked for me.

Alright, that was gonna be the next thing I tried actually, I guess the stock rooted rom has something special about it that makes it work?
Magic?

When all else fails that has just been the easiest place for me to go back to and start over.

Also, what is the best version of CWM to flash from rom manager to ensure CWM works without the black screen issue that you get without Eng S-OFF?

I get black screen with all of them. I did try down grading my hboot with this process:
http://forum.xda-developers.com/showthread.php?t=1003086&highlight=eng
And it worked, but then when I tried to back uo with CWN 2.x i ended up in a soft boot loop. I haven't tried it agian yet but I am going to. Then I will use CWM 3.X to do the back up and see if it works.

Alright, be sure to get back with your results, my phone is flashing right now! I can't thank you guys enough! I'll rep you and what not (am I thinking of the right forum?), major thanks guys!

Related

[Q] Soft-bricked my phone. Help?

So last night, I root my Inspire with the 1-click method.
This morning, I notice it won't download anything from the marketplace, no matter how many times I clear market data/cache, download manager cache etc., so I figured I might as well go ahead and flash a custom rom.
I load up the latest Cyanogenmod for my phone on the SD card, flash CWM, and reboot into recovery. However, there's an issue with the 1-click as it turns out that makes recovery boot to a blank screen for some people, including me apparently. So, instead of leaving it as it was and using the fix in the 1-click, I for some reason not terribly clear to me, decide it would be a good idea to pop out the battery. Now, it gets stuck at the HTC screen if I try to power it up normally, and if I do the hold power+vol up+vol down thing to try to get it to boot into recovery, it just sits at a blank, as in off, screen. Googling about leads me to wipe and flash a new rom, but if I can't get in to the phone, how exactly do I Do that?
Also, fiddling with the phone as I write this, I put the gold card in and was able to boot into hboot. I can fix it from here, right?
Edit: It turns out letting hboot do its thing brought it out of the boot loop.
Sorry to waste the time of anyone who read this, but it may serve useful to someone else with this problem.
Edit 2: It still, however, won't let me download Anything from the market. Any suggestions there?
OMGMatrix said:
So last night, I root my Inspire with the 1-click method.
This morning, I notice it won't download anything from the marketplace, no matter how many times I clear market data/cache, download manager cache etc., so I figured I might as well go ahead and flash a custom rom.
I load up the latest Cyanogenmod for my phone on the SD card, flash CWM, and reboot into recovery. However, there's an issue with the 1-click as it turns out that makes recovery boot to a blank screen for some people, including me apparently. So, instead of leaving it as it was and using the fix in the 1-click, I for some reason not terribly clear to me, decide it would be a good idea to pop out the battery. Now, it gets stuck at the HTC screen if I try to power it up normally, and if I do the hold power+vol up+vol down thing to try to get it to boot into recovery, it just sits at a blank, as in off, screen. Googling about leads me to wipe and flash a new rom, but if I can't get in to the phone, how exactly do I Do that?
Also, fiddling with the phone as I write this, I put the gold card in and was able to boot into hboot. I can fix it from here, right?
Edit: It turns out letting hboot do its thing brought it out of the boot loop.
Sorry to waste the time of anyone who read this, but it may serve useful to someone else with this problem.
Edit 2: It still, however, won't let me download Anything from the market. Any suggestions there?
Click to expand...
Click to collapse
Were you able to re-flash the same ROM or flash a different one?
I re-flashed the same rom, just a stock root.
I can install apps fine by sending them from the market on my Desktop, but every time I try to download something through the market on the phone itself, it starts the download before immediately sutting to a "download unsuccessful, try again later" dialog box.
OMGMatrix said:
I re-flashed the same rom, just a stock root.
I can install apps fine by sending them from the market on my Desktop, but every time I try to download something through the market on the phone itself, it starts the download before immediately sutting to a "download unsuccessful, try again later" dialog box.
Click to expand...
Click to collapse
Try to unmount and remove the SD card and then try to download from market.

Evo Shift Stuck In Boot Loop Please Help!

Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06img that I found on here on the root of my card, and it will never load it up.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!
Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk
Rooster85 said:
Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!
samcrac said:
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!
Click to expand...
Click to collapse
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Sent from my Supreme Shift
notsointeresting said:
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Click to expand...
Click to collapse
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???
samcrac said:
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???
Click to expand...
Click to collapse
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible
notsointeresting said:
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible
Click to expand...
Click to collapse
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!
samcrac said:
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)
notsointeresting said:
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)
Click to expand...
Click to collapse
Make it 2! Thanks for your help though!!!
Also Stuck In A Bootloop
samcrac said:
Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06IMG that I found on here on the root of my card, and it will load it up (I'll see the blue loading bar and then the brown loading bar in the top right hand corner of the screen), but it then checks it again, and then goes back to the original screen for the bootloader.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!
Click to expand...
Click to collapse
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.
Ok .. HERE'S THE SOLUTION:
First off all if your S- ON it means you are NOT rooted
If you get stuck in a bootloop .. don't worry it can be fixed.
What you need to do is download PG06IMG.ZIP and place it on your sd card, you can access your sd card by going into recovery then mount section, then usb. This will allow you to move the file from your computer to the root of your sd card.
Once you do this be sure you back up any info you don't want to lose. Once you have the file in place, go back to fastboot ( hold vol down and power) it will read file and when it asks you to update press vol up. It will take a few minutes to update this will revert your phone back to stock but if you have an old recovery it will not do a full restore, it will only update the rom.
Once you get your phone back to working, I recommend updating your recovery by downloading Rom Manager and flashing the latest clockwork recovery. This problem happens usually due to an old recovery.
One other thing you can try if you do NOT want to reset your phone, you can try flashing a new kernal.
Sent from my PG06100 using Tapatalk
RUU won't work if your stuck in bootloop ..
Sent from my PG06100 using Tapatalk
If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
flylike2kites said:
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk
Also if your phone can't be found its b/c you need to put it into diag mode .. ##DATA .. if you need more help google
tech-9 said:
If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk
For the thread starter, the person that sold you the phone probably tried writing to the system partition with s-on. Since you can get to the bootloader, see if you can get into recovery. If you can, recovery can be seen in adb, even the stock recovery. From there, gingerbread root, plenty of guides out there, make sure you flash the misc.img, download the froyo downgrade zip (that pgimg09.zip or something like that, just search for it, but not with the numbers I just gave, those are made up.)
From there either flash the gingerbread zip or ruu, and goon with a unrooted life. Or follow one of the many guides to froyo root, and live the life of the rooted. Your choice.
For the second person with a similar issue, the same method will work for you (assuming you can get to recovery), gingerroot, froyo downgrade, and since you like being unrooted, just ruu or zip back to gingerbread.
Solution found enjoy, and just think, if root hadn't been discovered for gingerbread, you would be screwed right now, make sure to thank otaking.
I have the same boot loop problem. I tried using the PG06IMG.zip file and fastboot/bootloader screen says I have the wrong image. It's most likely because it's for 2.2 and I have 2.3. I also don't have any recovery. Is there a PG06IMG.zip for 2.3 or the like?
similar problem here
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54
zdavidzz said:
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54
Click to expand...
Click to collapse
Try downloading the zip again and re run it. Possibly a bad download?
Sent from my PG06100 using Tapatalk
also adb is telling me device not found. i think i might have to factory reset. is that crazy?
---------- Post added at 01:31 PM ---------- Previous post was at 01:27 PM ----------
and... that didn't help
i'm downloading the zip again right now.
since i have s-on, will i be able to install it though?
i can get the file on the root of the sdcard with an adapter since i can't push from adb. and i can't temp root the phone because if i try a normal reboot i get this stupid boot loop. is there a way to get s-off through hboot on the phone?
i don't know why i didn't notice that first file was messed up, it was only 6MB.

Stuck on HTC screen, flashed wrong radio? Pls pls can you help.

Hey guys,
ok, so I flashed an incorrect radio onto my phone (i think) I was running CM7 and flashed a new radio to try and fix the GPS and now it's stuck on the white HTC screen. I cannot boot into recovery because all I get is Hboot and no option to run a restore.
I put the SD card into another phone and downloaded the correct radio, rebooted to recovery and ran the update, but it still gets stuck on the white HTC screen.
Im in a bit of a panic here please can someone help me.
Sorry I know im not the first guy whos done this and im sure you gusy get sick of people asking for help but im really desperate here.
Many thanks,
Adam
We have all had that feeling ^^
Do this:
1. - Open the back cover
2. - Remove the SD Card
3. - Pull the battery out for 5 secs and put it back in
4. - Put the cover back on
5. - Press Vol Down and Power at the same time. Keep holding on Vol Down till you get in bootloader
6. - Select Recovery
7. - Wipe Cache
8. - Put your SD Card back in
9. - Reboot phone and its all working again. Yey.
It was in the thread
Thanks for the quick reply, I'll give that a shot and see how I get on, really appreciate the support.
Adam
flashing radio
I wouldn't have flashed a radio unless I absolutely had to if you can boot into recovery and you have a backup of your original radio and do a full wipe and do a clean install if you still have all your zip files in recovery see this why the dev's tell you don't mess with the radio your going to have this pushed from a pc good luck
There's nothing wrong with flashing a radio. It's a very simple procedure and shouldn't cause any problems if done properly.
Hey guys,
Just to let you know popping the SD card let me get into recovery and fix the problem.
As you can see from my sig it's been a loooong time since I played around with Android and I probably mis-read (didn't read) something.
You have my very humble thanks.
Thanks TheStigx! Really helped, I was freaking for a minute there
nichos said:
Thanks TheStigx! Really helped, I was freaking for a minute there
Click to expand...
Click to collapse
does anyone know exactly why sometimes flashing a radio does this? is it cause they didnt clear cache? im jus wondering so i can avoid this issue alll togetherrr
i tried the instructions in post#2 and it worked, thanks so much i was freaking out too lol. just goes to show how little i know. just an edit though, i had to pull my sd car out, boot into the bootloader, then install the sd card back in and reboot into recovery, then i got a bunch of errors about mounting so i ignored that and then just did the wipe cash and rebooted. then it came back to life! i thank you guys

More B63M users here?

Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
B63M... thats my phone
Henkdrenth said:
Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
Click to expand...
Click to collapse
Now that makes us 2 people who owns a B63M and got it from cect-shop.
What I find out about their phones is that it may not easily allow you to perform some insider operations, for instance, maybe its me but I could not find any custom recovery installed and this led to my first issue after I rooted, and installed the ROM manager, I saw the 'fix permission' and clicked it hoping to resolve my force close issues and it asked me to reboot after performing the process but it never got out of the boot, the loop continued, trying to boot into recovery become impossible but somehow a combination got me into a mode where I was able to clear flash and this took me back to a pre factory flash good thing I backed up titanium so I cld restore my apps and upgrade.
Right now I have tried to flash and the screen has gone blank yet the phone is responding to touch as I can hear sounds when the screen is clicked, indicating that its not bricked I just cant see anything going on (this is my current situation and seriously looking for help).
Lastly, I am trying to find out the htc equivalent to this b63m, it looks htc but I cant be sure which of the htc has been more or less cloned... this is going to help with a lot of things if known.
Cheers
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Cect is German
Henkdrenth said:
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Click to expand...
Click to collapse
Yeah thanks, I have also stumbled on the site forum before but I cld not get something out of it, maybe I have not taken time enough to search, I am back on it now and hope I get a solution to the blacked out screen problems I have after flashing.
You know cect-shop is German, they are a German company in China... I am talking to them on skype and hoping they can help me out but they seem pretty busy or cant be bothered because their response is so much delayed or even not at all.
Well technoforum has a special B63M section with all tools required.
They also have nice custom roms like a Cyanogen fork.
I also don't speak Italian, but with the help of Google translate I'm getting pretty far.
But I do let Google translate from Italian to English, that gives me the best result.
Good luck!!
Do you also get no working screen after a reboot with both volume + and power button?
That should get you to the recovery screen without any ROM drivers.
Very correct, no screen even in recovery
When I do the button combination, I believe that it may have responded to my combination for recovery mode but I just cant see anything on the screen, it just remains the same way it was... maybe it graphics issue, as in is the graphics is messed up for some reason or resolution issue, you wont see anything being displayed.
I am just guessing here but all I did was to simply flash an update.zip from sd card.
That is very strange, since flashing a rom does not affect the screen of the recovery boot.
The rom video driver gets only active during the boot process of the rom.
In the past I had some boot problems with my Wildfire start-up that I solved by removing the SIM card and SD card, removed the battery for some minutes and them booted completely resetted.
You could try that, if that does not solve the problem, the only way to wipe the phone back to factory-reset is doing it blind.
After I get my phone I could make a step-by-step guide so you could get to the reset menu...
Another possibility is to re-flash a fresh recovery img to the phone. Since I don't know what was in your update.zip, you could messed up the recovery menue, or even the bootloader.
Re-flashing those could also help and you don. t need the display from the phone, since you use the PC for that.
Here it is
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Waiting on you... I hope my blank screen gets sorted.
balamu96m said:
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Click to expand...
Click to collapse
Ahh thanks man... Ii will wait to hear from you tomorrow, I aim in UK and depending on what time zones you are in but I hope to find you online to connect again.
I hope you have understood my particular issue here tho, the screen if blank even tho the fone seem to be alive and it follows the boot sequence, I can even find it using 'adb devices' command, it just the screen gone blank.
Someone suggested it may be the boot.img but I dont know about that.
Cheers
I'm from India - Local time here is GMT+5:30......!!
So, here you go !!
B63M= MTK6573 + 650mhz + Android 2.3
So, one modded recovery.img can't be used for every B63M.......this is because a different B63M phone will have a different recovery.img..........(hope u understand)
Backing up everything:
1) ROOT is necessary. It is recommended to put the phone in 'Airplane mode' so that it won't disturb the process and make sure you have ~500 mb space in SD card.
2) Download 'BackUpTools.rar' from HERE and extract it to your SD Card. You'll have 2 folders - 'gscript' and 'Install'.
3) Install 'GScriptLite.apk' from gscript folder.
3) After installation, open the 'GScriptLite' application -> Menu -> Add Script.
4) Tick 'Needs SU ?'
5) Click 'Load File' and select 'Back23.sh' and then select 'save'
6) Now Click on 'Back 23' and Super User will ask for Permission and allow it. Nothing more to touch. Wait for few minutes. After few mins, it will say 'Auto Close is Cancelled'. Now its safe to close.
7) Your Back-Up will be in 'backup_' folder located in your SD card's root.
It will have files named ' firmware.info, preloader.img, nvram.img, seccnfg.img, uboot.img, boot.img, recovery.img, secstatic. img, misc.img, logo.img, expdb.img, cache.img, system.img, data.img' in that folder. Copy it to your computer and keep it at a safe place. More Over if you are posting in the forums or sharing it online, don't include ' data.img, cache.img and nvram.img' as they contain your personal information.
Here i need two files.One is recovery.img and the other is firmware.info.
If you give both, i can port one for your phone !! Also mention your phone's model name/number because, without that it is not possible.
xdadeem said:
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
HTML:
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
Click to expand...
Click to collapse
That was the problem, you flashed only the update, not a complete Rom.
I suggest you make a complete re-flash vorm scratch, so refash a fresh recovery.img and re-flash als a new Rom.
You can vind one at technoforum' as earlier mentioned
I thot you shd read my latest.
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Great to hear that you have visual again!
You still have root yes?
The golight rom from technoforum is a good one.
I expect mine any moment now so I can customize mine too.
Good luck!
xdadeem said:
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Click to expand...
Click to collapse
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
It was always so
balamu96m said:
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
Click to expand...
Click to collapse
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
xdadeem said:
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
Click to expand...
Click to collapse
Now, is the recovery working??
Does the phone boot properly??
Wrong section. Moving to general.
YES and NO
balamu96m said:
Now, is the recovery working??
Does the phone boot properly??
Click to expand...
Click to collapse
After many troubles, I found a mod for w690 which is the build version of my phone, I could not boot to recovery so used flashtool and when I load the scatter text of the one I found, it automatically load in every item on the list including recovery and boot img , etc, so I flashed these to my phone... and for the first time I was back in how the phone came to me,
Gingerbread has now returned to 2.3.5.
One thing I have noticed is that the phone freezes on me and then reboots?
I still cannot boot into recovery, I tried this again using mobileuncle tools...
It seem that I have flashed my phone which is good, but I was unable to wipe cache because I could not boot into recovery to do this which may be the source of the current freeze and reboot.
Can I solve this using the mobileuncle or what can I do to wipe cache, if that is the problem
Well, received mine, rooted it an flashed a new recovery from technoforum using myuncletools.
All went well, so I suggest you do also a fres re-flash with a proper recovery.
Hope that should solve your problem.
Edit: moved from my tablet to my PC to look for the link of a correct recoveryfile for you.
First, load this recovery.
Unpack it and put the content to the root of your SD card.
Use myuncletools to flash this recovery.
Now you should have a usable custom recovery that allows you to factory-reset and wipe your phone
Install a fresh rom
How to? Look here

[Q] help with clockwork/softbrick

so I am new to the sidekick as I just got mine today. and I know it has issues with the stock rom freezing ect.
so i wanted to put glorious overdose on it. followed all instructions to get a dead link for the recovery file and update.zip.
then found http://forum.xda-developers.com/showthread.php?t=1275116 with a new link
however when I download the recovery and update and open it in root browser lite, it comes up as recovery.rc instead of just plain recovery. assuming this must be a mistake I renamed it to recovery and replaced mine with it. my sidekick was hanging on the boot screen when trying to go into recovery. but if I messed with the power button enough i could get it to boot normally. after redownloading and repeating what i did hoping maybe I copied the wrong file I tried it again. no luck. so i tried using quickboot (was suggested off a site I googled) and now I can't get the phone to boot normally anymore. just restart and hang at the boot screen.
I read this was fixable by using something call odin, so I'm going to try that while I wait for a reply.
but even when i get the phone back to stock and re-root it I still would like to know how to get clockworkmod working so I can load up glorious overdose and enjoy my new phone. I'm new to flashing roms to my phone. but I've done many gaming console and computer hard/softmods so I'm not incompetant. any help will be apprieciated.
EDIT: figured out odin. still looking for an answer to why my recovery comes up at recovery.rc
go here
http://forum.xda-developers.com/showthread.php?t=1965239
grab that recovery
rename it to update.zip, then flash it

Categories

Resources