So I have had issues with the head phone jack on two different thunderbolts.
When I plug in the head phones if the plug turns clockwise or counter clockwise at certain points I will lose sound from the left head phone. Same thing happens if you gently push the plug to the right.
I also tested headphones on the models verizon has on display and it did it on those too.
(note, I tried 3 different sets of head phones). This is really bothersome to me because if its in your pocket sometimes the plug gets nudged or turned).
Anyone else experience this? Not sure if I should attempt to exchange yet again.
Mine was working fine for a while but then my left side of ear buds went out. But then I plugged my ear buds into my PC. Turns out the Ear buds went bad. Skullcandy breaks way too easy...Phone is Fine though. just Coincidence I guess.
Strife21 said:
So I have had issues with the head phone jack on two different thunderbolts.
When I plug in the head phones if the plug turns clockwise or counter clockwise at certain points I will lose sound from the left head phone. Same thing happens if you gently push the plug to the right.
I also tested headphones on the models verizon has on display and it did it on those too.
(note, I tried 3 different sets of head phones). This is really bothersome to me because if its in your pocket sometimes the plug gets nudged or turned).
Anyone else experience this? Not sure if I should attempt to exchange yet again.
Click to expand...
Click to collapse
I discovered this same exact problem the other day and here's what I've found. I have 2 sets of headphones, 1 works perfectly fine and the other exhibits this same problem with the left ear going out. For the bad set, if I have them plugged in all the way then I have the problem, but if I pull it up a tiny bit after I've plugged them in it works fine. I don't know if there is a tiny difference in the length of the connectors or what but they just don't work when plugged in all the way. I figure I'll goto the hardware store and find a tiny little bushing and just put it on the headphone connector so it doesn't plug in all the way.
ikon8 said:
I discovered this same exact problem the other day and here's what I've found. I have 2 sets of headphones, 1 works perfectly fine and the other exhibits this same problem with the left ear going out. For the bad set, if I have them plugged in all the way then I have the problem, but if I pull it up a tiny bit after I've plugged them in it works fine. I don't know if there is a tiny difference in the length of the connectors or what but they just don't work when plugged in all the way. I figure I'll goto the hardware store and find a tiny little bushing and just put it on the headphone connector so it doesn't plug in all the way.
Click to expand...
Click to collapse
Not a bad idea my friend
im having the same exact issue as you. i need to experiment with it more before i swap it out
jacobk said:
im having the same exact issue as you. i need to experiment with it more before i swap it out
Click to expand...
Click to collapse
I also posted on the androidforums about this. Apparently it seems fairly common. I have exchanged my phone once for this issue and the new one came back the same way. I dont know if its a bad batch of phones or what. Even some of the display models did it at the store so it seems like a crap shoot.
The best thing to do would be call verizon support at this point I think and let them know its an issue so it becomes a known issue with them. They told me today that they haven't heard anything about this incident.
Same issue here. I noticed it when i had it plugged into my aux cable in my truck. Also, I don't know if its related but playing pandora over my speakers results in a really high pitched "click" from time to time. I never experience it when just my headphones are plugged in nor when i am using winamp.
I also have this problem - also the left speaker that gets cut out. I can either try to force the jack further in, pull it out a bit, or move it around until the connection is made. These are with UE TripleFi 10's.
I have the same problem.
Sent from my ADR6400L using Tapatalk
So verizon sent me a new phone and it does not have the issue the other two phones exhibited. It seems there are a bad batch of these headphone jacks. I suggest calling Verizon and letting them know that you are having an issue if its bothering you, so they at least recognize that there are quite a few people having the issue.
If the Thunderbolt's headphone jack is anything like my other smartphones, the reason you're having problems with your headphones is because you're not using the proper kind. Look at the picture on
http://www.appleinsider.com/articles/09/02/12/macbook_owners_frustrated_by_new_audio_jacks.html
Regular earphones have 3 metal bands separated by two nonmetal strips, whereas headphones for phones oftentimes have 4 metal bands separated by three nonmetal strips. This means if you're using a three-banded headphone into a four-banded jack, the contacts don't properly align.
The reason for this is simple: the headphone jack also serves as a jack for a microphone/earpiece.
I have a special set of stereo headphones that also have a microphone so if I'm listening to music and get a call, I can answer without having to unplug.
Hope that helps.
nerozehl said:
If the Thunderbolt's headphone jack is anything like my other smartphones, the reason you're having problems with your headphones is because you're not using the proper kind. Look at the picture on
http://www.appleinsider.com/articles/09/02/12/macbook_owners_frustrated_by_new_audio_jacks.html
Regular earphones have 3 metal bands separated by two nonmetal strips, whereas headphones for phones oftentimes have 4 metal bands separated by three nonmetal strips. This means if you're using a three-banded headphone into a four-banded jack, the contacts don't properly align.
The reason for this is simple: the headphone jack also serves as a jack for a microphone/earpiece.
I have a special set of stereo headphones that also have a microphone so if I'm listening to music and get a call, I can answer without having to unplug.
Hope that helps.
Click to expand...
Click to collapse
This is not the issue as the new phone has no problem with my 3 banded head phones work just great now. There is a defect in some of the inputs. And most high quality head phones such as etymonics and shures do not have the 4 banded design.
The description you mentioned does not support the anomaly that is happening, sound does not travel through one headphone nothing gets re routed the speakers on the actual phone.
Although this is very useful post it does not explain why the head phones now work perfectly as they did on some of the other TB's at the verizon store.
I also have post on android forums about this matter.
Strife21 said:
So I have had issues with the head phone jack on two different thunderbolts.
When I plug in the head phones if the plug turns clockwise or counter clockwise at certain points I will lose sound from the left head phone. Same thing happens if you gently push the plug to the right.
Click to expand...
Click to collapse
I had the same thing happen to me. I originally purchased mine on release day, they tested it with one of theirs and it didn't do it, so they gladly exchanged it for another one.
nerozehl said:
If the Thunderbolt's headphone jack is anything like my other smartphones, the reason you're having problems with your headphones is because you're not using the proper kind. Look at the picture on
http://www.appleinsider.com/articles/09/02/12/macbook_owners_frustrated_by_new_audio_jacks.html
Regular earphones have 3 metal bands separated by two nonmetal strips, whereas headphones for phones oftentimes have 4 metal bands separated by three nonmetal strips. This means if you're using a three-banded headphone into a four-banded jack, the contacts don't properly align.
The reason for this is simple: the headphone jack also serves as a jack for a microphone/earpiece.
I have a special set of stereo headphones that also have a microphone so if I'm listening to music and get a call, I can answer without having to unplug.
Hope that helps.
Click to expand...
Click to collapse
This makes loads of sense thanks I was having the same issue.
Sent from my ADR6400L using XDA Premium App
no issue with it here
This is going to sound like an odd solution and I may catch some flack for it but here it goes: Go to the auto parts store and buy spark plug Jelly. It has the unique quality of being able to transfer electric current hence no more losing audio L or R. I did this on my D1 and it worked perfectly. Just a tip; don't use a ton less is more.
stedrocklp said:
This is going to sound like an odd solution and I may catch some flack for it but here it goes: Go to the auto parts store and buy spark plug Jelly. It has the unique quality of being able to transfer electric current hence no more losing audio L or R. I did this on my D1 and it worked perfectly. Just a tip; don't use a ton less is more.
Click to expand...
Click to collapse
While that would help the connection, I can't say I would ever recommend it. It's going to be a dust collector, and nearly impossible to clean out. It is better suited on the spark plug because the plug is covered and sealed for most of its life.
Also, it can make a short between two of the connections, spark plugs only have one connection where the jelly goes.
Sent from my ADR6400L using XDA App
Ok those are good points. What I do know from experience is that it did work on my D1 and I never seemed to have an issue with dust but that might have been because the case I used plugged the headphone jack. So.... I will repeal my suggestion; don't use spark plug jelly.
nerozehl said:
If the Thunderbolt's headphone jack is anything like my other smartphones, the reason you're having problems with your headphones is because you're not using the proper kind. Look at the picture on
http://www.appleinsider.com/articles/09/02/12/macbook_owners_frustrated_by_new_audio_jacks.html
Regular earphones have 3 metal bands separated by two nonmetal strips, whereas headphones for phones oftentimes have 4 metal bands separated by three nonmetal strips. This means if you're using a three-banded headphone into a four-banded jack, the contacts don't properly align.
The reason for this is simple: the headphone jack also serves as a jack for a microphone/earpiece.
I have a special set of stereo headphones that also have a microphone so if I'm listening to music and get a call, I can answer without having to unplug.
Hope that helps.
Click to expand...
Click to collapse
this post is wrong. im having the issues and ive been using headphones with a mic and music controls since day 1. the issue is with the jack, not with the type of headphones being used. ive tried 5 different sets of headphones and they all exhibit the same issue.
jacobk said:
this post is wrong. im having the issues and ive been using headphones with a mic and music controls since day 1. the issue is with the jack, not with the type of headphones being used. ive tried 5 different sets of headphones and they all exhibit the same issue.
Click to expand...
Click to collapse
I agree with you, it should have nothing to do with having a mic, as the same exact pair of head phones I used ( 3 ring) that did not work on the older phone now work perfectly on the new phone.
Related
I'm actually having issues with my jack, I'm quite sure that its a manufacture defect. No matter what 3.5mm cable I use, any type of movement of the cable produces a 'keypress', either changing the song or pausing the song. Is there some way of using this information here to change the ability of my rooted, and un-warrantied, phone to fix my issue?
Samething happened to me last week one day when I was at the gym... but after a few reboots and pulling the battery out it went away. Hopefully it doesn't happen again and that it works for you....
wesbalmer said:
I'm actually having issues with my jack, I'm quite sure that its a manufacture defect. No matter what 3.5mm cable I use, any type of movement of the cable produces a 'keypress', either changing the song or pausing the song. Is there some way of using this information here to change the ability of my rooted, and un-warrantied, phone to fix my issue?
Click to expand...
Click to collapse
Is the metal of the jack exposed after plugging in all the way? (N1 design flaw imo). I've found that applying a tiny bit of tape over that exposed section on the headphone jack has eliminated this problem for me. I don't think getting a new phone will fix it.
its not a design flaw of nexus but of iphone 2g coz most headphones these days are capable to connect to iPhone 2g recessed jack without any adapter so these headphones became dominant during iPhone reign and still exist , i have a high range sony headphone with the same problem
Hello.
I'm trying to figure out and possible find a solution for why some headphones don't work with some phones?
For example a very well known brand Scullcandy. Their line of Skullcandy FIX Bud headphones work fine with Galaxy S2, but don't work with Galaxy S3, they also don't work with LG Nitro HD.
On GS3 they work for media playback, but when trying dial out or answer a call, the phone totally disconnects the headphones, the icon that shows when headphones are plugged in is no longer showed and at that point one has to physically re-plug the headphones in order to use them for media playback.
It does sound like phone's software issue, I sure hope so and there is a way fix it...
Another phone I had bad experience was LG Nitro HD. Even though the phone is totally waste of money it don't accept any iphone type headphones, they might work for playback, but mic or buttons don't work.
So what could possibly causing this issues?
I've tried post on phone related sections, but got no answers...
I also tried contact Samsung support regarding this issue, but they simply blew me off with "we don't provide support for 3nd hardware". Now I'm waiting for an answer from Skullcandy support.
Any ideas?
Thank you.
Probably the 3-pin layout of your phone. some are really weird in the way they work
x10man
There might be a couple reasons. The first is the connector. Some headsets use a three pole connector while others use a four pole connector. The other issue will likely be he pin out. The headphone jack might be a standard mechanical interface but not electrically. Both are hard problems but an adapter cable might help you.
All headphones connectors in question are 4 pin type, without using micrometer they look identical. Since all these headphones works fine in mp3 players, where only 3 pin connectors used, means the 3 out of 4 pins are in proper places and connected properly inside the wire.
So, without taking headphones apart it seems physically there is nothing different between them.
In addition, if there would be something physically wrong, it would not explain, why SGS3 sense when Skullcandy headphones connected, it shows headphones icon, but when a phone call initialized it "forgets" about it.
It sure seem to me like software related..
I hook up my phone to my auxiliary in my car and when it's fully plugged in, it only works with one speaker. Same happened when I used headphones as well. If I twist the aux cable a little, I can get it to work somewhat but it's very annoying because pretty much any movement causes it to go back to one speaker. Definitely an annoying issue especially while trying to use my phone as a music player as well. This happen to anyone else? Any type of fix for this?
I have the same exact issues. I don't believe there is a fix without opening the phone up. I have heard of others having the same issues but I haven't done any research on it.
I definitely thought I read about other ppl having this issue when the phone first launched. Also vaguely remember a thread about it too. But thanks for replying and def not opening my phone lol. It'll become a $300 paper weight
I had this issue as well. It was a problem from the first time i ever plugged headphones in. I thought i was going to have to send it back. It went on for weeks. Turns out, I didnt have them plugged all the way in even though i thought i did. I had to push much harder for them to go all the way in. I felt stupid. Work great now lol. Not saying that you have this problem. Just giving my experience.
Samsung uses a metric variation on thier male headphone jack. The actual female phono jack on the device is for 1/8" connectors. For some reason headphone/line cables are coming out in a metric size that the manufacturers claim is compatible with a true 1/8" jack and they are, but they are slightly undersized than a true 1/8" jack which can cause a loose connection resulting in channels not working properly.
The tip is also slightly modified on the metric male jacks causing that "not fully inserted issue".
Stick with good name cables/headphones with true 1/8" plugs, and that will stop alot of issues that may arise.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
My son works for verizon and has a GS3 also and he says try shutting off voice commands if you have them on. They cause issues with the head phone jack sometimes.
Settings/language and imput/voice command for apps.
incubus26jc said:
I had this issue as well. It was a problem from the first time i ever plugged headphones in. I thought i was going to have to send it back. It went on for weeks. Turns out, I didnt have them plugged all the way in even though i thought i did. I had to push much harder for them to go all the way in. I felt stupid. Work great now lol. Not saying that you have this problem. Just giving my experience.
Click to expand...
Click to collapse
Will try this next time I can and the other suggestions next time I'm in my car. Just don't want to jam it too far in though and end up breaking it lol. Too bad my cars blue tooth audio doesn't work because then this issue would be solved for most of my audio uses
Exact same problem here. Started within the first week of owning the phone. Cant plug it in any further. I think its a bad jack as every 3.5 mm connector ive tried including the one that came with the phone has the same problem. Found this on ebay http://www.ebay.com/itm/OEM-Flex-Ca...051?pt=LH_DefaultDomain_0&hash=item19d3950c8b Im guessing it will fix the problem but I am waiting to see if its more reliable then what shipped with the phone. I plugged mine in daily at least 5 times. Just using bluetooth now got a belkin bluetooth adapator for 25 from amazon that is tied in with a fm modulator from amazon for 14. A hack on a hack but it works. Not the best audio fidelity but good enough.
I've only been recently using my headphones with this phone, though they have worked fine. That final click for a positive stereo connection is more tough than one might expect for a portable device, but it's quite secure feeling.
With my Sennheiser PX-100 portables, there's no connection problem with this phone and balance between the speakers seems good. The connection needs to be made fully, pushed down flush with the phone edge and any phone protector needs to lie out of range of the connector, IMHO.
I then tested with my over-the-ear cans, but purposefully using a 1/4" to 1/8" adapter whose 1/8" connector was bent, and noticed a slight left channel bias. The bent adapter did seem to have a problem getting 100% into the jack, as well - still, it was pretty much all the way in with only the slightest bit of lift on one side.
So, I would agree with the poster above who mentioned that - if there are differences between your headphone's male connector and the type they happen to use in this phone - even a slight difference in connector vs jack size could cause an issue for playback.
If all male connectors give problems, I guess the possibilities are:
a. Male connector is not being inserted 100% flush to the phone edge
b. Phone cover is interfering with the connector being 100% inserted
c. Bad phone jack or downstream connection
- ooofest
Pushing it in all the way is not always the fix.. Cant push any of the several headsets I tried in any further. Bad jack add insult to injury the factory charger that came with the phone mysteriously just died wtf .
chickenmon said:
Pushing it in all the way is not always the fix.. Cant push any of the several headsets I tried in any further. Bad jack add insult to injury the factory charger that came with the phone mysteriously just died wtf .
Click to expand...
Click to collapse
If it won't push in such that the male connector's body is flush with the phone edge, then it is either a bad jack on the phone to begin with (your guess) or all your connectors are somehow incompatible with the new size of jack this phone uses, it would seem.
You're saying the wall charger just died? Might be a warranty on that from Verizon, I'd go to a store or give them a call.
- ooofest
Galaxy s3 headphone jack temp fix
I've had the same problem, tried buying a new cable but audio would only play from one channel
Today playing about I noticed if I pressed the jack slightly to one side it would work, so simple solution, I've bent the metal end of the jack ever so slightly and now it works like a charm with my galaxy s3. No more endlessly messing about playing withthe cable till iit works. Now I say again, vend the jack end slightly till it works, not too much else it might not plug in at all. Hope this helps people out!! Mark
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
I also have exactly the same problem in my car. I have a 3.5mm audio cable which worked fine for the first few weeks and then all of a sudden it stopped playing through the left speaker. At the same time, I also have crackling connection issues when I plug my S3 into a speaker in the kitchen. Headphones seem to work fine though.
It's almost as if some static caused a fault inside the female jack on the S3 given that it worked perfectly for ages and then all the problems came at once.
I tried disabling the voice commands as someone noted above (they were annoying me anyway) and it seemed to make a difference to the crackling but not the reception out of the left speaker - its still very low volume.
I was interested in the post from the guy who said there was a slight difference between 1/8 and 3.5 mm. Which way around is it? The cables I have all claim to be 3.5mm, so are you saying that the S3 has a 1/8th female jack?
I wonder also if there is a 3.5mm to 1/8 inch converter that would do the job. A quick google search didn't throw anything up though.
Hey guys,
I've heard all about the audio issues people have been having with output through an AUX cable and I have yet to test that. However, I have another issues where noise/hissing is introduced when I have headphones in and the charger is plugged in. It's especially prominent when not playing audio, but still having the headphones plugged in. I believe it is something to do with the poor grounding of the 3.5mm jack, so I am currently contemplating returning this device.
I was wondering if any of you guys can reproduce this issue or did I get a bad unit?
crazililazn said:
Hey guys,
I've heard all about the audio issues people have been having with output through an AUX cable and I have yet to test that. However, I have another issues where noise/hissing is introduced when I have headphones in and the charger is plugged in. It's especially prominent when not playing audio, but still having the headphones plugged in. I believe it is something to do with the poor grounding of the 3.5mm jack, so I am currently contemplating returning this device.
I was wondering if any of you guys can reproduce this issue or did I get a bad unit?
Click to expand...
Click to collapse
Could be poor grounding on the jack, but more likely is the Charger is introducing noise into the phone itself. lowerend chargers have this problem more often than others, or it could be something else plugged into your power strip per say. Since the phone has no "real" grounding to "earth" all noise from your outlet ie house also flows through the device.
I did a lot of research on this with my Skyrocket cause it was annoying to have that hum... ended up buying a grounding powerstrip to fix it. hope this helps a little..
Tweakecho said:
Could be poor grounding on the jack, but more likely is the Charger is introducing noise into the phone itself. lowerend chargers have this problem more often than others, or it could be something else plugged into your power strip per say. Since the phone has no "real" grounding to "earth" all noise from your outlet ie house also flows through the device.
I did a lot of research on this with my Skyrocket cause it was annoying to have that hum... ended up buying a grounding powerstrip to fix it. hope this helps a little..
Click to expand...
Click to collapse
I have tried with the LG charger and the charger that came with my S3 and both cause noise in the G3. Although I haven't tested it with a grounded powerstrip, I have never had this issue on my Galaxy S3. What I have tested is plugging in the charger to a powerstrip and an outlet in the wall and both cause the noise in the G3.
If you have a G3, are you able to reproduce this issue with yours?
crazililazn said:
I have tried with the LG charger and the charger that came with my S3 and both cause noise in the G3. Although I haven't tested it with a grounded powerstrip, I have never had this issue on my Galaxy S3. What I have tested is plugging in the charger to a powerstrip and an outlet in the wall and both cause the noise in the G3.
If you have a G3, are you able to reproduce this issue with yours?
Click to expand...
Click to collapse
Okay so i just used like 4 chargers, 3 sets of buds and 1 set of over ear headphones and 2 outlets. I can't get my G3 to make any noises what so ever except the slight hiss (only while playing music) with the over the ear headphones, but from what i read elsewhere i think it might have something to do with the in-line volume control.
Tweakecho said:
Okay so i just used like 4 chargers, 3 sets of buds and 1 set of over ear headphones and 2 outlets. I can't get my G3 to make any noises what so ever except the slight hiss (only while playing music) with the over the ear headphones, but from what i read elsewhere i think it might have something to do with the in-line volume control.
Click to expand...
Click to collapse
Hmm, that probably means that I got a bad unit then. I have tried with a set of of Beyerdynamic DT770s, my stock S3 earbuds, and Klipsch S3 earbuds. Since the DT770s have a higher impedance (80 ohms), I hear practically no noise. However, I hear a ton of noise with both of the earbuds. You think I should go get a replacement?
crazililazn said:
Hmm, that probably means that I got a bad unit then. I have tried with a set of of Beyerdynamic DT770s, my stock S3 earbuds, and Klipsch S3 earbuds. Since the DT770s have a higher impedance (80 ohms), I hear practically no noise. However, I hear a ton of noise with both of the earbuds. You think I should go get a replacement?
Click to expand...
Click to collapse
Don't know your set up but i would take it buy the store and ask to "test" it on another unit and see... something seems amiss for sure..
Tweakecho said:
Don't know your set up but i would take it buy the store and ask to "test" it on another unit and see... something seems amiss for sure..
Click to expand...
Click to collapse
I notice that the noises become more prominent whenever I do something with the touchscreen. Definitely seems like a grounding issue with the phone itself... Can you try your test again and see if your phone makes electrical noises when using the touchscreen?
Hey everyone, I took a leap of faith and bought the following product from Amazon...it's about $10:
http://a.co/49qKkqH
I'm shocked to say this thing works perfectly in my Mi Mix 2. I'm not an expert on audio but it sounds the same as with the standard included dongle, and the charging seems to work fine too but I think it's limited to 500mA perhaps as a USB-C limitation. I also tested the charge rates with my Axon 7 (which won't allow for audio with this thing, but does allow charging), and it *seems* that this charger works at about 0.5 amps only but at least it will allow for GPS/music, etc. without really bleeding battery power. I was able to keep a slight positive charge with WiFi off, GPS active, screen on low-ish brightness, and music playing (from internal storage...not streaming music) over the phone speakers..albeit only about 50-100 mA...but, the charge percent did slowly go up.
Of course, I'm not sure how long this thing will last...or if there may be some other deficiency with it that I'm not aware of, but so far so good and if you're frustrated by the lack of a headphone jack this may help you...and it's pretty cheap so I guess I'm not too worried.
EDIT: One limitation I just noticed...the microphone on my headset seems not to work during calls (the audio of the caller is fine though)...but the microphone on the phone is fine so you just have to aim your voice into the phone's base. Also, it seems like the controls on my headset don't work either (i.e., volume up/down, etc.). So, I'm not sure if different headsets will yield different results but just wanted to communicate this [apparent] limitation.
EDIT (AGAIN): The button issue/microphone issue seems to be resolved by reversing the orientation of the male USB-C connector. That is, if you only get a headphone and not a full-function headset when you use this, try unplugging the USB-C connector from the phone, flipping it over, and then reconnecting it.
https://www.amazon.com/Wofalodata-H...=1509570567&sr=8-1&keywords=wofalodata+type+c
I have that one, and it works well for charging and playing music.
flyer_andy said:
Hey everyone, I took a leap of faith and bought the following product from Amazon...it's about $10:
http://a.co/49qKkqH
I'm shocked to say this thing works perfectly in my Mi Mix 2. I'm not an expert on audio but it sounds the same as with the standard included dongle, and the charging seems to work fine too but I think it's limited to 500mA perhaps as a USB-C limitation. I also tested the charge rates with my Axon 7 (which won't allow for audio with this thing, but does allow charging), and it *seems* that this charger works at about 0.5 amps only but at least it will allow for GPS/music, etc. without really bleeding battery power. I was able to keep a slight positive charge with WiFi off, GPS active, screen on low-ish brightness, and music playing (from internal storage...not streaming music) over the phone speakers..albeit only about 50-100 mA...but, the charge percent did slowly go up.
Of course, I'm not sure how long this thing will last...or if there may be some other deficiency with it that I'm not aware of, but so far so good and if you're frustrated by the lack of a headphone jack this may help you...and it's pretty cheap so I guess I'm not too worried.
EDIT: One limitation I just noticed...the microphone on my headset seems not to work during calls (the audio of the caller is fine though)...but the microphone on the phone is fine so you just have to aim your voice into the phone's base. Also, it seems like the controls on my headset don't work either (i.e., volume up/down, etc.). So, I'm not sure if different headsets will yield different results but just wanted to communicate this [apparent] limitation.
Click to expand...
Click to collapse
Thanks! I was going to to start a thread asking if anyone found one that works.
I have a couple questions about the headphone buttons. Does the play/pause button still work with the combo dongle? Or do none of the buttons work?
Unrelated to the Amazon product, do your headphone buttons work with the Xiaomi dongle? I have a headset with a play/pause button and volume up/down that works perfectly with my Mix but only the play/pause button works correctly on the Mix 2. Are you running stock ROM? I have a feeling my button problems have to do with the fact that my Mix has a MIUI-based ROM and I have a Lineage-based ROM on the Mix 2.
Either way thanks for taking the plunge and sharing.
alose said:
https://www.amazon.com/Wofalodata-H...=1509570567&sr=8-1&keywords=wofalodata+type+c
I have that one, and it works well for charging and playing music.
Click to expand...
Click to collapse
Do headphone buttons work with this one? Is charging as slow as the one in the OP?
chimera533 said:
Thanks! I was going to to start a thread asking if anyone found one that works.
I have a couple questions about the headphone buttons. Does the play/pause button still work with the combo dongle? Or do none of the buttons work?
Unrelated to the Amazon product, do your headphone buttons work with the Xiaomi dongle? I have a headset with a play/pause button and volume up/down that works perfectly with my Mix but only the play/pause button works correctly on the Mix 2. Are you running stock ROM? I have a feeling my button problems have to do with the fact that my Mix has a MIUI-based ROM and I have a Lineage-based ROM on the Mix 2.
Either way thanks for taking the plunge and sharing.
Do headphone buttons work with this one? Is charging as slow as the one in the OP?
Click to expand...
Click to collapse
Yes I have the exact same experience with respect to the buttons...when I try the stock dongle, I do get pause/call answer functions but the volume up/down doesn't work. I know that Xiaomi does have their own headphones so maybe you don't get full functionality with non-Xiaomi headphones? Not sure...I'm using Bose headphones, as a reference.
Ok...so something really weird just happened...using the combo dongle I now *do* get phone microphone audio through my headset and also the call button does seem to work, but instead of ending the call it mutes the microphone. Also, the icon in the status bar now shows headset+mic and not just headset...maybe it was a quirk earlier or the headphone was loose or something.
Also, I seem to get much better charge rates with the Mi Mix 2 as opposed to the Axon 7...I'm getting about 1000 mA I think...I've attached a screenshot. It shows around 800 mA but I bet with the screen off you'd get around 1000.
Sorry for lots of inconsistency here! I'll have to keep trying this thing but it does seem that there's hope!
EDIT: Ok I think I figured out the inconsistent operation. I had purchased two of these dongles...one of them appears to have a defect where audio works, but buttons and microphone do not. The headphone jack is tighter on the [half] defective one so maybe there's just a bad connection in there...in any case it looks like there may be some manufacturing QA issues with the dongle which means they may have some inconsistencies between them...maybe it'd be worth buying two or three and and planning on sending back any that aren't needed.
Do headphone buttons work with this one? Is charging as slow as the one in the OP?[/QUOTE]
Fast charging is supported on the Wofalodata, and at least Pause/play works.
I ordered the one in the OP and I'm not impressed. Charging seems to be stuck around 500mA for me. I could live with that. Zero of my headphone buttons work which is less forgivable. But the worst part is it's already falling apart. The headphone jack was so tight that I pulled off the outer sheath while trying to cram my headphones into it. Picture attached. That silver part hanging loose around the wire should be attached to the headphone jack.
I ordered the second adapter from this thread today to see how I like it. Curse Apple for starting the no headphone jack trend.
Edit: I now also get really bad static through my headphones when I have the adapter plugged in to a power source. Before I was using it with a half charged phone. Now my phone is fully charged. That may be the difference.
chimera533 said:
I ordered the one in the OP and I'm not impressed. Charging seems to be stuck around 500mA for me. I could live with that. Zero of my headphone buttons work which is less forgivable. But the worst part is it's already falling apart. The headphone jack was so tight that I pulled off the outer sheath while trying to cram my headphones into it. Picture attached. That silver part hanging loose around the wire should be attached to the headphone jack.
I ordered the second adapter from this thread today to see how I like it. Curse Apple for starting the no headphone jack trend.
Edit: I now also get really bad static through my headphones when I have the adapter plugged in to a power source. Before I was using it with a half charged phone. Now my phone is fully charged. That may be the difference.
Click to expand...
Click to collapse
Yeah mine does the static noise if it's sitting at 100% charge too...best to unplug at that point if possible though I agree that's annoying.
Sorry to hear the silver part fell off...one of my adapters is a bit tight on the 3.5mm jack too but it has gotten better with use.
As far as the buttons - I think I've discovered the issue. It's totally bizarre...but...it seems that if I insert the USB-C male end in with the metal seam upward (i.e., so that the headphone jack is on the left side) the buttons work as expected (as does the microphone). In case you just want headphone functionality, the adapter can be flipped/inserted where the 3.5mm jack is on the right side of the USB-C port...the phone's speakerphone mic appears to pick up audio for calls in this use case but it actually is useful when I'm using my car's AUX port as I can make better calls way. Here's a video:
Thank you! It does matter how you plug it in. For me it's actually the opposite. I need to plug it in with the seam facing the back of the phone (headphone jack on right) to get my play/pause working. None of the other buttons work but I wasn't expecting them to.
I also get a slight hiss when the phone isn't at 100% charge and like you said a horrible static noise when plugged in at 100%. But I think I can deal with that.
I think now I can at least superglue the sheath back on and get some use out of it.
chimera533 said:
Thank you! It does matter how you plug it in. For me it's actually the opposite. I need to plug it in with the seam facing the back of the phone (headphone jack on right) to get my play/pause working. None of the other buttons work but I wasn't expecting them to.
I also get a slight hiss when the phone isn't at 100% charge and like you said a horrible static noise when plugged in at 100%. But I think I can deal with that.
I think now I can at least superglue the sheath back on and get some use out of it.
Click to expand...
Click to collapse
Sweet! How odd! Yeah definitely not the best-built accessory but so far it does seem to work...I hope at some point a more reputable producer makes something like this as it's a great idea but like you pointed out...not-so-perfect implementation. I will keep in mind your experience with that sheath coming off though...now I know to be super careful with that connection!
And I totally agree on the whole killing the headphone jack thing...really really aggravated with that development myself...it seems the OEMs are driving the marketplace whereas it should be the other way around.
flyer_andy said:
Sweet! How odd! Yeah definitely not the best-built accessory but so far it does seem to work...I hope at some point a more reputable producer makes something like this as it's a great idea but like you pointed out...not-so-perfect implementation. I will keep in mind your experience with that sheath coming off though...now I know to be super careful with that connection!
And I totally agree on the whole killing the headphone jack thing...really really aggravated with that development myself...it seems the OEMs are driving the marketplace whereas it should be the other way around.
Click to expand...
Click to collapse
This one works, I have this one I use while in bed with headphones and charging, Doesn't fast charge, but it's not really slow either.
Its made of metal and the cables are braided, Its good quality.
https://www.aliexpress.com/item/Typ...-3-5mm-Jack-Audio-Earphone-Y/32832185514.html
I have an alternative solution. I'm beyond impressed with these things for how much they cost. Good sound, good battery life, and good comfort. They don't ever drop connection either. I used to hate on BT headphones until I got these.
https://www.amazon.com/gp/product/B06VVL4WJZ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1