There are two ways to root your galaxy 3 on 2.2/2.1
Z4ROOT(2.1)
1.Download the attached z4root.apk and install it.
2.Enable USB Debugging
3.Go into z4root and click on Permanent Root.
Super One Click Root(2.2)
Make sure your phone drivers are installed on the computer (Samsung Kies). Then follow the steps:
1. Enable USB Debugging.
2.In Superoneclick 1.7, check regeagainstthecage then click on the 'Root' button. After a few seconds, it'll say 'Waiting for device'.
3. Connect the phone to the computer using the USB Cable.
4. Superoneclick will detect the phone.
5. Now the phone will be rooted.(don't touch while it is going on.)
6. After rooting, download and install busybox on your phone.(get it from market)
If you run into any problems then, follow the instruction s given below..(by hodostamas)
If the program stucks here:
Running rageagainstthecage...
or
getting mount path...
Do this:
1. If touchwiz is the default launcher, set it.
2. Reboot your phone
3.Try to root again following the above instructions
(It should be pass Running rageagainstthecage...)
Restart phone, and try again.
It should work now.
small supplement:
If the program stucks here:
Running rageagainstthecage...
or
getting mount path...
Do this:
If not the touchwis is the default launcher, set it.
Reboot your phone
Try root again
It should be pass Running rageagainstthecage...
If loop in getting mount path...
Remove SD card, or unmount it.
Restart phone, and try again.
It should be work now
hodostamas said:
small supplement:
If the program stucks here:
Running rageagainstthecage...
or
getting mount path...
Do this:
If not the touchwis is the default launcher, set it.
Reboot your phone
Try root again
It should be pass Running rageagainstthecage...
If loop in getting mount path...
Remove SD card, or unmount it.
Restart phone, and try again.
It should be work now
Click to expand...
Click to collapse
Thnx for the added info....added it 2 the main post...
Sent from my GT-I5800 using XDA App
Although i use a prerooted rom and it is the best way z4root also worked great for me when on the stock rom and its easier and faster!
cdesai said:
Although i use a prerooted rom and it is the best way z4root also worked great for me when on the stock rom and its easier and faster!
Click to expand...
Click to collapse
personally z4root has never worked for me on 2.2!!
z4root i guess is not for froyo!....i last heard it was for 2.1 eclair
the 2.2 rootin software wz this superoneclickroot! :O
whats prob with superoneclick 1.7 ?? it dsnt need any turnoff-turnon ..!! i succesfully rooted my jpm ... used over 10times ... no prob with that ..!!
BUMPED!!
THANK ME
|
|
|
v
Already rooted using superoneclick long ago.
Just wanted to know-
if manual rageagainstthecage method using terminal emulator works with g3?
And update.zip method works for froyo? (they say it's for eclairs, I personally never tested on froyo or eclairs, but it seems to be the easiest method if it works, after z4root which doesn't work)
is there any new way to root the phone ?
AccountSaver said:
is there any new way to root the phone ?
Click to expand...
Click to collapse
and why would u need that sir?
does superclick or z4root doesnt work for u?
AccountSaver said:
is there any new way to root the phone ?
Click to expand...
Click to collapse
I find that flashing a custom rom is a lot easier since it is pre-rooted and it's got a lot of performance tweaks etc but i'm using stock rom atm and i rooted it using superoneclick. If you have android 2.1 then use z4root (an app on your phone) which i have used for my first time rooting on this phone when i had android 2.1 and if you have android 2.2 then use superoneclick root (a program on your computer). Hope this helps.
AccountSaver said:
is there any new way to root the phone ?
Click to expand...
Click to collapse
Flash via cwm recovery and get root access if u have not yet
u dont need a laptop (super one click root) u only need a custom recovery,
btw every custom rom comes prerooted, it is only usefull for those who have stock rom (Odexed or deodexed) with a custom recovery(g3mod kernel)
View attachment Superuser.zip
AccountSaver said:
is there any new way to root the phone ?
Click to expand...
Click to collapse
Cf-root kernel
Or wait for some more time, we(me n dympy) are testing new method(s)
I rooted using Superoneclick but my data access is off now. When I check on, & go to browser. The datacheck box becomes off again.
Any fix for this?
Related
Hi,
I tried doing the Oneclick root with my Epic that is running 2.1 Eclair. When I installed Titanium and busybox it said phone is rooted. BUT when I start the phone in Manual mode to install update it only has 4 options:
Reboot
Install update
Wipe data
Wipe Cache
When I scroll down and select Install update it starts the process and then says e.signature verification failed update aborted. Is there something I am not doing right? I tried to unroot and reroot the phone but still get the same thing.
When I try the Root process with Oneclick Software for Samsung Galaxy One Click root it says the phone will restart and to select reinstall packages but I do not have that option. It still has the options shown above.
I know when I did my Hero and Evo I could get root and install Roms with no problems.
Can someone help please.
From reading you just need to install clockwork and then install roms and stuff. The kernels include a root, so install clockwork and install the rom I have in my signature. It already includes a kernel so that helps by one less thing you have to do. The one in my signature I have had no issues at all.
I installed rom manager (which is clockwork, right?) and tried to install a rom that way but when it reboots it goes to the same screen and gives the same message.
KateC1 said:
I installed rom manager (which is clockwork, right?) and tried to install a rom that way but when it reboots it goes to the same screen and gives the same message.
Click to expand...
Click to collapse
How are you rebooting into recovery? It sounds like you're hitting the stock recovery. Shut the phone down entirely and hold Vol -, Camera, and power. Keep holding until after the Samsung logo goes away.
Does this bring you more options?
If you still get nothing, try this instead
http://forum.xda-developers.com/showthread.php?t=808103
Nope.... Same options. I will read the link you provided.
Also, Busybox says that my phone is rooted then I click install and it says I do not have nand unlocked. Maybe this is the problem?
KateC1 said:
Nope.... Same options. I will read the link you provided.
Also, Busybox says that my phone is rooted then I click install and it says I do not have nand unlocked. Maybe this is the problem?
Click to expand...
Click to collapse
I might be wrong here, but I'm pretty sure getting nand-unlocked is a part of the rooting process. Perhaps the root didn't work entirely for you, I had a lot of problems using the 1 click root with my first epic because of timing, I had to open the batch file and replace the ping 127etc (the delays) with a pause command because the phone took too long to respond and the second half of the rooting process would fail. Try the link I posted, it worked out well on my first phone.
Thanks....So far I have removed the Oneclick root from it and now it says the phone is not rooted. My next step is to root again... Hope it works.
Worked great! Thank you!!!
KateC1 said:
Worked great! Thank you!!!
Click to expand...
Click to collapse
Awesome, Glad to hear you're up and running, Now you get to do the fun stuff (roms!!!!)
Yup.... Already got my Rom of choice installed and happy... Did not take long at all.
Hi,
Im trying to root my G2X using superoneclick but everytime it reaches step#6 the program says not responding and it just locks up. Has anyone had this issue and knows how to resolve it? Im running the G2X with the gingerbread update and the latest superoneclick which I beleive is 2.1. I unmounted the SD card and I have the USB debugging checked.
Anyone?
Thanks
Superoneclick does not work on gb update, nvflash custom recovery, then just flash any rom you want.
Look in dev section on how to nvflash custom recovery.
Start here http://tinyurl.com/3ejyxct
Dude u people need to do a little research wtf man u probably been at this for days all u have to do is flash recovery with nvflash use tga gunman's guide its a one click tool like the tool we use for root its one button done, then u just flash xboarders rom or cm or even restore a backup if u have one anything with root will give u root privileges, I myself updated with LG updater tool (I just wanted baseband) I then flashed recovery, then restored my cm nightly backup, still had new baseband and was rooted again
fcisco13 said:
Superoneclick does not work on gb update, nvflash custom recovery, then just flash any rom you want.
Look in dev section on how to nvflash custom recovery.
Start here http://tinyurl.com/3ejyxct
Click to expand...
Click to collapse
Thanks, it worked perfectly
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
So that worked with stock gingerbread?
phburks said:
So that worked with stock gingerbread?
Click to expand...
Click to collapse
As far as I know the exploits are blocked for security reasons so they never get root access. Without temporary root super one click cannot install the programs needed to make root permanent. If this is a work around that would be a new development.
still don't get it
read the posts but still dont understand how to root my galaxy s2. SOC freezes at step 6.
info: GS2, 2.3.3 phone bought in hong kong, flashed to new european firmware. insecure kernel. bb: I9100XXKDH. Original version "2.6.35.7-I9100XWKDD-CL161513 [email protected]#2" Compilation number "GINGERBREAD.XWKDD"
Can someone please help me?
androst said:
read the posts but still dont understand how to root my galaxy s2. SOC freezes at step 6.
info: GS2, 2.3.3 phone bought in hong kong, flashed to new european firmware. insecure kernel. bb: I9100XXKDH. Original version "2.6.35.7-I9100XWKDD-CL161513 [email protected]#2" Compilation number "GINGERBREAD.XWKDD"
Can someone please help me?
Click to expand...
Click to collapse
Um...GS2? This forum is for G2x.
If you happen to have a linux machine you can root this way.
http://forum.xda-developers.com/showthread.php?t=1259852
Man of La Mancha said:
Um...GS2? This forum is for G2x.
Click to expand...
Click to collapse
Awesome. Sorry guys.
@jcbofkc thanks! if it looks promising i'll create linux partition
guys ! help me ...
Hi Guys,
I am also getting the same old Freeze error at step 6.. i am trying with samsung mini and i use super one click 2.1.1 . please help.....
premsurya said:
Hi Guys,
I am also getting the same old Freeze error at step 6.. i am trying with samsung mini and i use super one click 2.1.1 . please help.....
Click to expand...
Click to collapse
seriously???
Again, this is G2x forum not samsung xxx!
jose makalolot said:
seriously???
Again, this is G2x forum not samsung xxx!
Click to expand...
Click to collapse
doesnt matter what device people use. ultimately, stock GB freezes at step 6. can anyone can validate the steps above, "to unplug the cable and toggle usb debugging" works or not?
if the only way is to flash the device, then there is no Rooting tool available yet for GB stock devices.
em0101001 said:
doesnt matter what device people use. ultimately, stock GB freezes at step 6. can anyone can validate the steps above, "to unplug the cable and toggle usb debugging" works or not?
if the only way is to flash the device, then there is no Rooting tool available yet for GB stock devices.
Click to expand...
Click to collapse
If the device has an alternate recovery (doesn't matter which one) you can use by G2X root zip to root it. It will work on any GB device that has an alternate recovery.
..well i do have a G2X, with 2.3.3 out of the box.... and it get stuck on step 6 too
"rooting device...-step #6
that's it!...
vourinen said:
..well i do have a G2X, with 2.3.3 out of the box.... and it get stuck on step 6 too
"rooting device...-step #6
that's it!...
Click to expand...
Click to collapse
You can't superoneclick root 2.3.3 only 2.2. You have to flash CWM recovery then install a root zip or pre rooted ROM. All can be found in the Dev forum.
Sent from my CM 7.1.0 G2x using XDA app
i myself would like to see a new biuld of this pragram that works with the g2x w/gb 2.3.3. who made the software ?
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
Worked for me. Thank you, sir!
Thanks
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
This worked for me. Thanks
Hello from greece
i have just bought samsung galaxy s plus....i have decided to root it so i could manage to connect it to android manager......
so i have
2.3.3
i9001xxkg1
with kernel [email protected]#1
i succeded to root with odin 4.43 and the ariesve.ops and fm root_xxkg1.smd procedure.....all went well i did see the super user icon in the menu but everytime i m trying to connect it to android manager or any other manager it keeps showing that you canot use superusers settings because is a stock something.....
and i am asking is my phone rooted?yes root check gives me thumb up.....so WHTA IN THE EARTH ITS WRONG.........i cant understand it at all....please help me and how to connect to kies rom my phone?
sory for the attitude i really need someone to clear this situation for me....
thanks in advance to all
mikrokatevas said:
Hello from greece
i have just bought samsung galaxy s plus....i have decided to root it so i could manage to connect it to android manager......
so i have
2.3.3
i9001xxkg1
with kernel [email protected]#1
i succeded to root with odin 4.43 and the ariesve.ops and fm root_xxkg1.smd procedure.....all went well i did see the super user icon in the menu but everytime i m trying to connect it to android manager or any other manager it keeps showing that you canot use superusers settings because is a stock something.....
and i am asking is my phone rooted?yes root check gives me thumb up.....so WHTA IN THE EARTH ITS WRONG.........i cant understand it at all....please help me and how to connect to kies rom my phone?
sory for the attitude i really need someone to clear this situation for me....
thanks in advance to all
Click to expand...
Click to collapse
You need to flash a custom rom.. superuser app will not work on any stock rom...you just succeeded in installing the superuser app but your phone is not rooted.
push thank you button if my post helped
neoxyrel said:
you just succeeded in installing the superuser app but your phone is not rooted.
Click to expand...
Click to collapse
Nope, the fm_root install su, too. So it should normally work.
But mikrokatevas, just try the rooting-method described here: http://forum.xda-developers.com/showthread.php?t=1253707
neoxyrel said:
You need to flash a custom rom.. superuser app will not work on any stock rom...you just succeeded in installing the superuser app but your phone is not rooted.
push thank you button if my post helped
Click to expand...
Click to collapse
thanks for the response
but as another user said the fm root is a custom rom.....
reneph said:
Nope, the fm_root install su, too. So it should normally work.
But mikrokatevas, just try the rooting-method described here: http://forum.xda-developers.com/showthread.php?t=1253707
Click to expand...
Click to collapse
are you sure its going to work?because i am a little confused.....i will try it thow
mikrokatevas said:
are you sure its going to work?because i am a little confused.....i will try it thow
Click to expand...
Click to collapse
is working. I'm using root explorer and chainfire with root permision
nemec1982 said:
is working. I'm using root explorer and chainfire with root permision
Click to expand...
Click to collapse
i need this root so i can communicate sgs+ to android commander.......it dosent working so far
Hai it sound creazy but i rooted my lg o3d with vipermod primer for asus transformer prime this link http://forum.xda-developers.com/showthread.php?t=1427125, i just downloaded and unzip the file (i use windows xp sp3 32bit), connect my phone to computer (you must have driver for your phone, and in debug mod) and run viperMOD primer tool (it must be connected in internet because will download nacho Root) it will booting 3 times and always ask to install driver just ignor it, and voila your phone is rooted thanks for vipermod primer tool team
ps i 'm not responsable if you brick your phone. this method work for me
ps if shell id not 0 please repeat this method, after root get superuser from market
Hi, your windows are 64bit or 32bit?
my windows is 32 bit
yea http://vipermod.tiamat-dev.com/2012/01/vipermod-primer-tool-for-asus-transformer-prime/
Nive going to try this when i get homr
Sent from my LG-P920 using xda premium
Not working
not working for me.. goes to last step asking uid and sid should be 0 . But its not
I try this method, and do not work, uid and sid are 2000.
can somebody test this
http://forum.xda-developers.com/attachment.php?attachmentid=761956&d=1319631837
and this
http://forum.xda-developers.com/attachment.php?attachmentid=841876&d=1325678726
Problem
Not work... any not Work
I can also confirm, none of the above methods worked, including the OP..
Doesn't work for me either... :-(
Sent from my LG-P920 using xda premium
Try these method for temp root.
In attachment
adixtra said:
Try these method for temp root.
In attachment
Click to expand...
Click to collapse
do not working
I started manually from adb nachoroot.bin, it try to patch some non existent files which are specific to asus (sensor, some config..), i can post later screenshot. With this patch is impossible to root optimus 3d.
If you really rooted it successfully it was one step before viper and viper only copied su, please try to remember what else you tried.
@adiextra Can you make flashable recovery from PC? With this we can easily root phone.
Best Regards.
it shows me that
one thing i remember that i came from v21a rooted, and then i flash with v21b adixtra style (so i already have superuser on it), after that i rooted with vipermod just once and it's rooted easily, it's work for me i have v21b rooted
bnorontako said:
one thing i remember that i came from v21a rooted, and then i flash with v21b adixtra style (so i already have superuser on it), after that i rooted with vipermod just once and it's rooted easily, it's work for me i have v21b rooted
Click to expand...
Click to collapse
Just to be sure before i try, phone is flashed (upgraded firmware on already rooted phone) with this method: http://forum.xda-developers.com/showthread.php?t=1287236 and then after that rooted with vipermod?
yes you can try it, unzip the file from your download in windows ( i use windows xp sp3 32 bit), connect your phone to computer (your computer must have driver for the phone and phone must be in debugmod) run viperMOD primer tool.exe (your computer must connected to internet because will download nacho root), there will be three options choose one for root and hit enter, it will download nachoroot and push automaticly to phone and reboot by itself, wait until reboot complet (if windows ask to install driver just ignored it) by it self will rooting wait you will be ask uid and gid must be 0, check your result if your uid and gid 0 respond yes (if not repead the procedure)now it will rooting your phone and will booting by itself after booting compled your phone is rooted
ps i am not responsable if you brick your phone
pelopicopata1969 said:
I try this method, and do not work, uid and sid are 2000.
Click to expand...
Click to collapse
Got the same. Did not work for me. I gave up on v21b and went to v21a.
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Isn't g3mod prerooted already?
No, Superuser isn't installed. Set Cpu and Titanium Backup can't obtain root acess
There are also many other ways, I've read about it. But I ended at SuperOneClick also. Check this method out (rooting is on 3rd page, but try to take a look at previous, too). I see (from my FF internet history) that I've read it once...
And, please, tell if it worked
T1ll said:
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Click to expand...
Click to collapse
You probably did this since you already used Super one click but I will still ask...
Have you enabled USB debugging mode?
you can use unlock root if superoneclick don't work.for me it's the best for root
I'll write a little guide and you'll see if you forgot any steps...
1.) Activate USB debugging (settings > applications > development > USB debugging
2.) Unmount SD card (settings > sd and phone storage > unmount sd)
3.) Shut down phone
4.) Open superoneclick and connect phone to computer via usb
5.) Click ROOT
6.) When it says waiting for device turn on phone and wait
7.) Superoneclick should show msg "Your phone is rooted"
8.) As soon as it starts up, phone will be rooted and ready
T1ll said:
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Click to expand...
Click to collapse
I would assume none of these steps worked because the same happened to me once and I couldn't do anything
How to fix: make sure debugging is enabled on phone and put it away for now. Uninstall Kies and Samsung drivers and then re-install them. Now simply reinstall Kies and connect phone. Voila, you can now use super one click to root. (Make sure you use 'rage against the cage for old version and auto for new )
I think g3mod is indeed pre-rooted and it isn't recognized bij superoneclick (I think). You just have to install superuser from the market. This works for me. It only takes some time the first time superuser access was asked.
The G3 Mod Kernel is really not rooted
-> http://forum.xda-developers.com/showthread.php?t=1252698
The G3 Mod ROM however is
-> http://forum.xda-developers.com/showthread.php?t=1252719
Easy to mix in mind.
T1ll is using stock ROM with G3 Kernel.
-> no root by default
Cheers
qaysed
T1ll said:
Hello,
today I wanted to root my g3, because i flashed a stock firmware. Now with super one click it doesn't work anymore but many times before it always worked without any problems. Super one click says:"Waiting for device.." and after that nothing happens. So is there any other possibility to gain root acess??? My firmware is JPU and i flashed G3 Mod kernel 2.3.
Thanks in advance
Click to expand...
Click to collapse
This happends to me too, but I didn't enable USB debuging mod.
I have another probelm with SuperOneClick, as I try to download it my NOD32 antivirus detekts some trojan virus inside, so I would it not recomend anymore!!!
I just rooted my i5800 XXJPS with Unlock Root application.
After I finished with rooting, the instruction was to restart my phone, and than
my phone started to flash white light.
I had to take battery out, and than I started my phone.
It worked, the rooting was succesufull, but I don't now why my phone started to flash???
just give a f*ck to any virus scanner warning on your pc
its an exploit (!), so the virus warnings are consequent
do it or let it be
or
use a CR, they are all (?) prerooted
okan5 said:
This happends to me too, but I didn't enable USB debuging mod.
I have another probelm with SuperOneClick, as I try to download it my NOD32 antivirus detekts some trojan virus inside, so I would it not recomend anymore!!!
Click to expand...
Click to collapse
If you read superoneclick root's xda post, you would know that it would definitely b detected as a virus
Cheers
Sent from my GT-i9003 powered by MIUI
The same thing happened to me,when i was on JPS i rooted my phone easily.The after that i used several Custom Roms,and when i eventually went back to stock JPU the superoneclick apk wouldn't work for me...So i tried Unlock Root tools,and success it worked
yes, i got that problem in JPU too.....just try "rageagainstthecage"