Database Info

Motorola Backflip MB300 BIG PROBLEM

Well hello everyone to start off, i was trinketing around with rom manager and i think i flashed the original droid recovery and 2.5.0.1 into my phone on accident. now when i try to start the phone i get a white M and thats it tryed to boot into recovery only thing i can get to is the holding power and j and d down to get the usb flash init screen which is blue. can someone direct me in the ways of the force and help me bring this phone back to life or am i screwed? I have the j_rodd recovery image on the sdcard but adb wont pick it up as a device.

It is same with me...
Diremaker35 said:
Well hello everyone to start off, i was trinketing around with rom manager and i think i flashed the original droid recovery and 2.5.0.1 into my phone on accident. now when i try to start the phone i get a white M and thats it tryed to boot into recovery only thing i can get to is the holding power and j and d down to get the usb flash init screen which is blue. can someone direct me in the ways of the force and help me bring this phone back to life or am i screwed? I have the j_rodd recovery image on the sdcard but adb wont pick it up as a device.
Click to expand...
Click to collapse
I have problem with my Motorola MB300 ME600. when power even power + up OR power + down it only display and to M logo and make sound (has vib)... I can connect to fast boot even RSD. Help me! Plz....

CyanogenVietNam said:
I have problem with my Motorola MB300 ME600. when power even power + up OR power + down it only display and to M logo and make sound (has vib)... I can connect to fast boot even RSD. Help me! Plz....
Click to expand...
Click to collapse
firmware for your device.
You need to download these things...
RSD Lite 4.5.7
AT&T Stock Android 2.1 Blur v3.0.1390 - Original SBF by Skrilax_CZ @ ModMyMobile
And if you're doing this and haven't attempted root yet, or would just like to wipe your device through and through, HERE are the Moto USB drivers. Make sure to get the correct installer for x86 or x64.
Install your USB Drivers (if you haven't already)
Install RSD Lite
Turn off your backflip
Plug the USB cable into the phone and computer
Open the keyboard and press J+D+Power simultaneously and let up when you see the blue recovery screen with the black moto batwings. In the bottom left corner of the screen it will say in white letters "USB init mode"
Now when the phone boots to the recovery screen, Windows will begin installing a driver for the MSM720x flash recovery mode.
After the driver has successfully installed, open RSD Lite
Upon opening RSD Lite, you should notice ONE connected device in the table below. If not, post what you did exactly and we can help
Now that the device is showing in RSD Lite, click the "..." browse button to point to the Android 2.1 Blur 3.0.1390 image you downloaded earlier
Once that's selected, press start to start flashing your phone.... DO NOT UNPLUG UNTIL IT'S FINISHED.
Once finished, it will reboot itself and you should be presented with the Android Setup after a minute or two.

MY XOOM WiFi MZ604 is HEAVILY BRICKED! HELP ASAP, PLEASE!

Error : Starting RSD mode 3
I followed the steps on rooting the xoom wifi from this website : http://forum.xda-developers.com/showthread.php?t=1010568. I got to the step,"fastboot flash boot boot.img". Then it stuck at "Dual Core Technology". I rebooted my xoom, then it went to the same screen, but there is an ERROR. The error is "Starting RSD mode 3". PLEASE HELP ME WITH THIS PROBLEM!
EDIT : Also, I can't connect my XOOM to my PC via USB. It won't even play that WINDOWS sound when i plug it in to pc, it won't recognize.
EDIT2 : I can't get into fastboot. I powered my xoom down, then hold power and volume down button, and it just shows the motorola logo.
-shadowminh

if you press power and vol up till it resets then hold volume down it will boot into fastboot mode and you can try to reflash the boot img
Sent from my Xoom using Tapatalk

Sic123 said:
if you press power and vol up till it resets then hold volume down it will boot into fastboot mode and you can try to reflash the boot img
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
I reseted my xoom. But when i hold the volume down, it just show the motorola logo, with no error, and it freezes. It doesn't show the fastboot.

So the only option you have is rsd3? You can only run commands from fastboot. If you do a hard reset while its plugged into the pc, does anything happen?

Droid-Xer said:
So the only option you have is rsd3? You can only run commands from fastboot. If you do a hard reset while its plugged into the pc, does anything happen?
Click to expand...
Click to collapse
yes. I either go to rsd3 or nothing, motorola logo. adb, or fastboot, won't find my device. How do you do a hard reset???

Can someone help me with this problem! Pleaaaase!

Hold power and vol up
Sent from my MZ604 using XDA Premium App

ankorez said:
Hold power and vol up
Sent from my MZ604 using XDA Premium App
Click to expand...
Click to collapse
that's to reboot

Are you find solution?
tu peux essayer ça: http://forum.xda-developers.com/showthread.php?t=1052644
Sent from my MZ604 using XDA Premium App

shadowminh said:
that's to reboot
Click to expand...
Click to collapse
what OS are you using?????
did you make sure drivers loaded before trying to use fastboot?

If you get the rsd3 you should be okay. I had same issue and used rsd lite with the sbf and it worked.

There is no SBF for the WiFi only xoom. So he needs fastboot.

Please Help...
I got very similar problem.
I own Motorola Xoom WiFi only and I was trying to root it via Koush manual.
Everything works fine until step 9. Xoom didn't reboot. I'm just looking on Motorola Dual Core technology logo...
I try to restart it (Vol Up and Power) but nothing changed...
So sorry for my English
EDIT: reflash original motorola sw, so works fine now... without root

me to i have same problem
maybe the solution sbf file but where the sbf ???
every day i heard tomorrow

just reflash all original stock wifi images...

Unbrick your Motorola Fire XT

Download the two things needed:
ROM : XT530 European
RSD Lite v5.6 : Motorola Flashing tool
HI all I have seen many users on internet who had bricked their phone by rooting.(I was also the one :laugh: )
I will tell u how to unbrick your phone and bring it back to working state.
(I am not responsible for any damage to your phone. I have tried it on my cell and finished successfully)
You would be requiring Motorola USB drivers.You can download it from official website.
Steps:
1. Install RSD Lite v5.6(Link attached) and open it.
2. Take your phone in your hand connect to your windows PC via USB cable holding volume down (-) and camera button.
3. Once you see the boot-loader screen on your phone see if it's showing up in RSD.
4. If it is then you are ready to bring back your phone to working mode.
5. Extract the ROM you downloaded before in your pc using winrar.
6. Go back to RSD and navigate it to the file you just extracted.
7. If your device shows up and Rom loads in RSD then you are just a click away.
8. Finally click on start.
9. It will start flashing rom and within 4-5 minutes your phone will be working fine.
10. After disconnecting your phone, it will be in FTM mode. Just hold Volume up(+) and power button it'll restart the device.
Warning : It wipes all your data in phone memory including contacts,apps and messages.
Note : Do this if and only if RSD stuck for more than 5 minutes.
Its being very rare but if you get this problem that in the end after your phone gets in FTM mode and the process In RSD stuck on Executed 100%. Don't worry just unplug your phone, remove battery, keep it for 5-10 seconds place battery and again connect it and start boot loader mode as you started above. It will show finish.
All I want is you to click on THANKS
So it will increase my encourage me to post new threads.
If you face any problem please reply or message.
The whole process doesn't take more than five minutes.
Good luck. And reply me back your experience.

aweosomeabhijeet said:
Download the two things needed:
ROM : www(dot)mediafire.com/?h73a80xuhs0ii8j
RSD Lite v5.6 : goo(dot)gl/TuH91
(Please replace dot with . as i am not able to post links)
HI all I have seen many users on internet who had bricked their phone by rooting.(I was also the one :laugh: )
I will tell u how to unbrick your phone and bring it back to working state.
(I am not responsible for any damage to your phone. I have tried it on my cell and finished successfully)
You would be requiring motorola USB drivers.You can download it from official website.
Steps:
1. Install RSD Lite v5.6(Link attached) and open it.
2. Take your phone in your hand connect to your windows PC via USB cable.
3. Go into boot-loader mode by holding the volume down(-), camera and power button.
4. Once you see the boot-loader screen on your phone see if it's showing up in RSD.
5. If it is then you are ready to bring back your phone to working mode.
6. Extract the ROM you downloaded before in your pc using winrar.
7. Go back to RSD and navigate it to the file you just extracted.
8. If your device shows up and Rom loads in RSD then you are just a click away.
9. Finally click on start.
10. It will start flashing rom and within 20-25 minutes your phone will be working fine.
11. After disconnecting your phone, it will be in FTM mode. Just hold Volume up(+) and power button it'll restart the device.
Warning : It wipes all your data in phone memory including contacts,apps and messages.
Note : Do this if and only if RSD stuck for more than 5 minutes.
Its being very rare but if you get this problem that in the end after your phone gets in FTM mode and the process In RSD stuck on Executed 100%. Don't worry just unplug your phone, remove battery, keep it for 5-10 seconds place battery and again connect it and start boot loader mode as you started above. It will show finish.
Guys I am sharing my useful information with you so all I want is you to click on THANKS
So it will increase my encourage me to post new threads.
If you face any problem please reply or message.
Click to expand...
Click to collapse
Thanks! But, my Fire XT was unrooted and I'm not sure if I should proceed with this. You have read my other thread over at Android Q & A. Please tell me if I should proceed with this or not.
Sent from my asus_laptop using Tapatalk 2

You can use it.
It works on both
Sent from my XT530 using xda app-developers app

I tried it. My phone does not seem to go into download mode. Any idea why? I held down the three keys for more than 5 minutes, but the white lights just keep showing. Nothing else happens.
Update: The phone screen turned on after a few minutes of holding down the buttons. It shows a screen where there's a battery icon. I believe the phone was severely drained. No other reason for it. But why didn't the screen show when I had plugged it into the computer yesterday or when I tried charging it for hours long back?
I'll keep you posted when the phone turns on.

I think it's some hardware error you got.
I too had the same problem you have.
I returned it to the sc they replaced it's motherboard.
But I think your phone turned on for a reason known as stack charging.
It is cycle of continous charging. Let it charge and ensure that battery is more than 70%.
Then you can perform this procedure.
Sent from my XT530 using xda app-developers app

Nice
Thanks to you I have hope to fix my phone. I will post again if this works!
THANKS!

Help with bootloader
My bootloader wont install correctly. I can get into flash mode but it wont show up on my computer.

Froggywoggy25 said:
My bootloader wont install correctly. I can get into flash mode but it wont show up on my computer.
Click to expand...
Click to collapse
Try pulling the battery, putting again and connect your phone with volume down(-) and camera button pressed.
See if that works.
Sent from my XT530 using xda app-developers app

Didnt work
I tried it but the driver "Flash MSM7227" cannot install correctly. Because of this it wont show up in RSD Lite. Do you know how to go into download mode?

Froggywoggy25 said:
I tried it but the driver "Flash MSM7227" cannot install correctly. Because of this it wont show up in RSD Lite. Do you know how to go into download mode?
Click to expand...
Click to collapse
Install latest moto drivers.
Sent from my XT530 using xda app-developers app

Already did that. Do you know how to get to download mode?

Froggywoggy25 said:
Already did that. Do you know how to get to download mode?
Click to expand...
Click to collapse
There are only three modes in XT530
1. Flash mode
2. Recovery mode
3. FTM mode
Of them which one you are talking about?
I think other name of flash mode is download mode.
Sent from my XT530 using xda app-developers app

I think you did something wrong because all other people succeeded in this.
Sent from my XT530 using xda app-developers app

I plugged it into my computer. Went into flash mode. It doesnt show up on RSD lite because the driver is missing for some reason.
Unless im missing something?

Froggywoggy25 said:
Any of them. I can only get to recovery and flash. I dont think flash and download are the same though.
Click to expand...
Click to collapse
Enquired bout it. They are same only.
And try that with some other pc and follow the steps carefully.
Sent from my XT530 using xda app-developers app

Thanks
aweosomeabhijeet said:
Download the two things needed:
ROM : www(dot)mediafire.com/?h73a80xuhs0ii8j
RSD Lite v5.6 : goo(dot)gl/TuH91
(Please replace dot with . as i am not able to post links)
HI all I have seen many users on internet who had bricked their phone by rooting.(I was also the one :laugh: )
I will tell u how to unbrick your phone and bring it back to working state.
(I am not responsible for any damage to your phone. I have tried it on my cell and finished successfully)
You would be requiring motorola USB drivers.You can download it from official website.
Steps:
1. Install RSD Lite v5.6(Link attached) and open it.
2. Take your phone in your hand connect to your windows PC via USB cable.
3. Go into boot-loader mode by holding the volume down(-), camera and power button.
4. Once you see the boot-loader screen on your phone see if it's showing up in RSD.
5. If it is then you are ready to bring back your phone to working mode.
6. Extract the ROM you downloaded before in your pc using winrar.
7. Go back to RSD and navigate it to the file you just extracted.
8. If your device shows up and Rom loads in RSD then you are just a click away.
9. Finally click on start.
10. It will start flashing rom and within 4-5 minutes your phone will be working fine.
11. After disconnecting your phone, it will be in FTM mode. Just hold Volume up(+) and power button it'll restart the device.
Warning : It wipes all your data in phone memory including contacts,apps and messages.
Note : Do this if and only if RSD stuck for more than 5 minutes.
Its being very rare but if you get this problem that in the end after your phone gets in FTM mode and the process In RSD stuck on Executed 100%. Don't worry just unplug your phone, remove battery, keep it for 5-10 seconds place battery and again connect it and start boot loader mode as you started above. It will show finish.
Guys I am sharing my useful information with you so all I want is you to click on THANKS
So it will increase my encourage me to post new threads.
If you face any problem please reply or message.
The whole process doesnt take more than five minutes.
Good luck. And reply me back your experience.
Click to expand...
Click to collapse
Thanks for this turorial. You saved lot of my time..

xt311
goodwill2012 said:
Thanks for this turorial. You saved lot of my time..
Click to expand...
Click to collapse
is this for xt311

socioan said:
is this for xt311
Click to expand...
Click to collapse
The tutorial will be the same but ROM is not.
Sent from my XT530 using xda app-developers app

Deleted google play on unrooting
aweosomeabhijeet said:
The tutorial will be the same but ROM is not.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
I accidently deleted my google play store and google search app during unrooting by superclick. Where can I get this apps. Help

It works for boot loop?

Can't update (volume down + connect doesn't work)

The phone works, I can install apps, etc...
I have .12. No rooted, bootloader locked.
The other day I tried to unlock bootloader with flashtool, I got my code.
Clicked BLU, pressed volume down key and connected the phone.
Worked fine, showed some messages about the phone, and other window appears saying "waiting for fastboot"
In the guide doesn't say nothing about fastboot so I tried again about 4 times.
Then when the fastboot windows appear I tried volume up key and connect.
Flashtool show a message about drivers.
I tried again but now when I try connecting with volume key pressed nothing happens.
I thought it was something about my pc, but today I tried to update to .14 in other laptop (PC companion).
And when I have to connect with volume key pressed nothing happens. The key works when phone on.
Already reset.
Thanks.

You have to allow PC debuging in developer options, and maybe also unknown sources when working with flashtool - and of course installed correct drivers for your device before you start
Sent from my Nexus 7 using XDA Premium 4 mobile app

I already did that.

can u plz tell me which windows version u are using in PC and if u have installed fastboot and flash drivers or not????

I also experienced the same problem but I solved it. Just when trying to go to flashmode or fastboot mode, after inserting the cable push the volume down and power button at the sametime
Hope this works
Sent from my C2105 using xda app-developers app

remove sd card then try the same,hopefully it will work.

Ambi007 said:
remove sd card then try the same,hopefully it will work.
Click to expand...
Click to collapse
Thanks, I updated to .14 removing the sd

Power Off device
I faced the same issue few times.
Whenever it happened, what I did was, go into recovery and power off device and then try to enter flash mode/ fastboot mode. And it worked always.
So, I guess the problem behind this is incomplete power off.

[Help] Bricked my Nexus what's next? :(

Hi, this situation is kind of strange and I hope it's just the battery and not the whole goddamn phone.
What I'm dealing with at the moment is:
The phone doesn't boot
When plugged onto charger or USB cable it boots but stuck at Google logo after a blink and stays there. Also, Home, Back and other buttons are lighten.
When "forcefully" put into fastboot mode, e.g. after plugging it onto USB and instantly pressing Vol Up + Power it stuck there as well, volume rocker no more response neither does the power button. Also, I notice there are no commands at the end like "USB int" etc we see normally.
Fastboot or ADB returns no device found
Please help. I personally believe it could be due to battery, what do you guys think?
Thank you.

As long as you can see the google logo, your device is not bricked. GIve more useful information; like your computer operating system, the last thing you did before this happened, etc.

ej8989 said:
As long as you can see the google logo, your device is not bricked. GIve more useful information; like your computer operating system, the last thing you did before this happened, etc.
Click to expand...
Click to collapse
Thanks. My OS is Windows 8.1 Update 1. The last thing was to install UPDATE-SuperSU to root so that I can install ROM Manager to update Recovery but the installation was aborted so I attempt to flash it via Fastboot with success. Then, wanted to install SlimKat but it couldn't let me mount USB storage so that I can put the .zip file. I, then stupidly click on install via ADB but didn't know how to go back so I pulled the battery and powered up; used ADP push command to transfer said the file, but again for some reason I had to pull the battery and since then I am in above position.
Sent from my XT1032 using Tapatalk

Put the device in bootloader and plug it into the computer, be patient, my phone is rather slow to get detected sometimes.. (Up to 30 min.) Check your drivers on the computer, try rebooting the boot loader from just pressing the power button (while in boot loader mode)..
If all else fails, read up on Wugs NRTK page and about ODIN...
Sent from my Nexus S using XDA Premium 4 mobile app

Setting.Out said:
Put the device in bootloader and plug it into the computer, be patient, my phone is rather slow to get detected sometimes.. (Up to 30 min.) Check your drivers on the computer, try rebooting the boot loader from just pressing the power button (while in boot loader mode)..
If all else fails, read up on Wugs NRTK page and about ODIN...
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, device doesn't go into bootloader without plugging it to computer (I've to press required buttons BEFORE plugging OTG cable). And when it boots in fastboot mode it doesn't let me press any button either. I kept it plugged in for sometime as well when it when it was at Google logo; will try to do the same while in fastboot mode too and let you know. As for drivers, same computer was used before when it was working and it detected just fine immediately (gave me a pain to find the right drivers though - PDANet was a life saver).
EDIT:
I should mention that I broke the OS before this happened by formatting /system folder and wiping other data from CWM recovery - I think, I also rebooted it without flashing the ROM as well.

BaghiXDA said:
Hi, device doesn't go into bootloader without plugging it to computer (I've to press required buttons BEFORE plugging OTG cable). And when it boots in fastboot mode it doesn't let me press any button either. I kept it plugged in for sometime as well when it when it was at Google logo; will try to do the same while in fastboot mode too and let you know. As for drivers, same computer was used before when it was working and it detected just fine immediately (gave me a pain to find the right drivers though - PDANet was a life saver).
EDIT:
I should mention that I broke the OS before this happened by formatting /system folder and wiping other data from CWM recovery - I think, I also rebooted it without flashing the ROM as well.
Click to expand...
Click to collapse
I recently had to update my drivers on my computer.. after it did an update, my phone wasn't recognized..
Try Wugs Nexus Root Toolkit,.. use the options for "bricked".. do this from the bootloader screen (power/volume +)...
I don't have experience with ODIN, so you'll need to read that forum/threads...

Setting.Out said:
I recently had to update my drivers on my computer.. after it did an update, my phone wasn't recognized..
Try Wugs Nexus Root Toolkit,.. use the options for "bricked".. do this from the bootloader screen (power/volume +)...
I don't have experience with ODIN, so you'll need to read that forum/threads...
Click to expand...
Click to collapse
The problem is, even the Toolkit doesn't recognize the device no matter what. Even the keys for ODIN don't work, aren't they Home+VOL+ and Power?
EDIT1:
Kept plugged in for little longer as suggested but it heats up (it's too hot here) so I plugged out. Going to be running it off of Linux and lets see how it goes. :fingers-crossed:
EDIT2:
Tried Adam's UnBrickable method on Linux and even that couldn't find device. But that was to be expected since Adam clearly mentioned in his post that this tool isn't for those who see anything on their screen.

Whelp! Currently I can only see I:\ drive in device manager and that's all under portable devices and that's all. I see the same even in BIOS boot options, it's listed as "Google".

Guess need to close this thread now.