Related
Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..
schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.
Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.
I just joined your club. Wow this sucks.
So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?
I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App
Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?
have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331
same problem..... anybody find something to fix this yet?
From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X
Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.
Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.
Good Morning Everyone, This is my first post. I try to never post just read. I have read and read but to no avail. I have a AT&T Samsung infuse 4g. it WAS running froyo. What I mean by WAS, is that I was trying to install the modded 3e recovery so I could install clockworkmod recovery. During this process I read that I need to mount the /system partition as read/write I did this using the tool box that was created by some of your developers. It is awsome by the way. Well I did that and put a new recovery file in the /bin but it did not work as the website claimed so I thought well I should delete the old one. Bad Idea when I did the reboot it stopped me at the samsung screen. I tried to hard reboot it pulled the battery talked to it with a really kind voice and nothing happend. So I decided to use GEG's Ultimate Unbrick because this has worked for me in the past when i have messed up. So I put my phone into download mode and started the process with Odin. And here is where it gets bad.... one of my children was talking with me during the process and he decided to unplug my phone.. AHH EFFFFFF! I thought. Well when I tried to fix it it was to late. My phone will no longer turn on or even pretend to start. I am broke and cannot afford a new phone plus my wife would kill me seeing we have 6 children and it is right before christmas if I came home with a new galaxy note 2 Please Please can any one help a desperate dad with a busted Samsung Infuse. Thank you all for this awesome website that has taught me alot.. Please dont kill me for posting something someone has already posted because I could not find anything that was helpful for this situation with my phone.
Xda is awesome!
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
MerkTheMedia said:
Well I didnt read good enough I guess because while I was waiting not so patiently for a reply I found this http://forum.xda-developers.com/showthread.php?t=1194294 which got me back to download mode yes!!!! Thank you thank you thank youXDA love you guys! Merry Christmas! PS I still want the Galaxy Note 2 so if you have a extra one please PM me and I will give you my address LOL!
Click to expand...
Click to collapse
Awesome! Glad you got your phone functioning again. Being persistent in searching and reading and trying to find answers usually results in good outcomes. :thumbup:
Sent from a de-Funkt Infuse
Okay now I have really done it this time. So I worked a 18 hour day and thought well instead of getting some rest i will install Gingerbread on my infuse. To make a long story short while I was using odin to install it paused for a long time at the format stage, so I thought well I will just turn it off even though it says not to and then.....well it did a rainbow colored screen I tried to figure it out last night with no luck. So I have been working on it all morning the rainbow screen is gone but now it just goes from black to all white screen. I have tried every possible way to get into download mode with no luck. Am I screwed or what? Does anyone have any suggestions. If I am out of luck does anyone know if bestbuy's warrenty covers rooted phones that are [email protected] bricked?
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
saxk said:
You just need To update your boot loader.
You can navigate in the screwy screens but it takes patience and some guesswork. Been there
Also...
Good instructions here
http://forum.xda-developers.com/showthread.php?p=14550608
USB cables have given me issues as well as drivers. Install Kies to get the drivers.
Another...
http://forum.xda-developers.com/showthread.php?p=23118134
Sent from my SGH-I997 using xda app-developers app
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
MerkTheMedia said:
It still will not get me into download mode it is powering on and off connecting and disconnecting I have the drivers installed I have tried gtg's guide I have tried qstars one click nothing is working. These have worked for me in the past but that was because I can get into down load mode. Unfortunately not any more Is there a way to make the phone stay on and connected so it stops going black to white to black screen? I am so bummed out! I have been reading for so many hours my brain hurts. I have learn a ton but I can't do anything with my new knowledge with no phone!!!AAAHHHHHH
Click to expand...
Click to collapse
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
qkster said:
if you're boot looping in the samsung logo, it could be your power button. search for how to fix power button
Click to expand...
Click to collapse
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
MerkTheMedia said:
Qkster its a honor to have you comment on my thread, Unfortunately Im not boot looping to the samsung logo it is just a black then white then black back and forth taunting me with every blink. I did read the thread about the power button earlier though and that is unfortunately not the fix either. I do appreciate the input you guys really do try and help! Maybe you can answer a question for me is there a way to get to the phone through command prompt? I really need this phone fixed. My wife has been telling me I shouldnt be messing around with it because im gonna break it. I really dont want to tell her she was right. I will never hear the end of it lol!
Click to expand...
Click to collapse
You're too kind, Merk.
I'm not sure what happened to your phone. The Infuse is pretty sturdy. Flashing should not cause much of an issue. The faulty power button and corrosion of the circuit board were the most I've seen reported.
This is what I use to force the phone into download mode:
http://www.ebay.com/itm/Micro-USB-J...665854?pt=PDA_Accessories&hash=item3f201c4f3e
Once in DL mode, it's a matter of choosing Odin or Heimdall to bring it back to stock.
One other thought, try a different battery as well.
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
Well im going to give it a shot I still have the old infuse I tried to make my own jig which didnt work for me so I took it into bestbuy and they gave me a brand new phone and in all of the hustle and bustle of christmas shopping going on around me they did not take my bricked infuse so now I have a spare to tinker with. Thanks I will definately give it a try and report with my findings
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
michaelsinbad said:
I had the same exact problem. If the only thing the phone will do is go into download mode, then Samsung will fix it (if your still under warranty). They fixed mine and sent it back to me. Then I tried to flash another ROM on there and while it was flashing, I went to the store, and when I came back it said failed. Then it would only go into the other download mode. The one that has this (phone...!...PC). It wouldnt show up on odin 1.7 anymore. So I ended up trying a USB cable for my HTC evo v, and the drivers installed, then it popped up on Odin. I used G2G's Ultimate Unbrick (dude is a f-ng genius, all credit goes to him) and instead of putting the pit, PDA, and phone file on there and flashing, I flashed one at a time......then....I went back and flashed all at once and everything worked perfect. If your still having trouble with it, I can tell you exactly how I did it, and maybe that will work for you. Sorry to but in on this post and sorry it was so long of a reply. I just no what its like when you half brick an infuse. Mine was like that for 6 months because I couldn't get any computer to recognize it. But anyway, I hope I was helpful.
Sent from my SAMSUNG-SGH-I747 running CM10 4.1.2 JB using xda premium
Click to expand...
Click to collapse
okay I tried but that didnt work either. Can you go ahead and explain "exactly" what you did maybe it will work!
Thanks again for everyones help!
Ok first I downloaded the unbrick package from this website. I downloaded the drivers for the infuse (not sure exactly where I got them from). I would just Google them. Then I tried every USB port on the laptop. Then switched cables and it finally worked. Opened Odin 1.7 and clicked pit, then flashed. Then I unplugged it, took the battery out and put back in and tried to boot. Didn't work. Then flashed PDA. Did same steps as before and still didn't work. Then flashed phone file. Tried to boot and still didn't work. Then I flashed all 3 files at once. Also, not sure if you know or not but the only thing that should be checked in Odin is f: reset time. Then the phone booted up and it stayed on at&t screen for about 5 minutes then finally came on. Also, you could also try to flash this other PDA file on there. I have the link saved on my computer but I'm not at home right now so I'll have to post that later. In easier steps
1. Put phone in Download mode and plug into pc.
2. Run Odin as admin and only thing checked is f reset time.
3.Flash pit then try to boot
4. Flash PDA then try to boot
5. Flash phone then try to boot
6. Flash all three at once
7. After flash While in download mode, unplug USB cable, take battery out and put back in
8. Reboot phone.
Sorry everything is all jumbled, I just got back to my home state from a road trip and I'm running on about 6 hours of sleep in 3 days. I hope this works for you. Also, there is a video on YouTube of a unbrick service for the phone. Its $30. I personally would not try it but its just an idea if you would want to.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had the issue where I had the phone, the exclamation mark, and the computer symbol (The Black Screen of Death: Imaged Attached), that is all it would show when I turned it on. I thought the phone was completely bricked until I did the following, which put it into a hidden download mode and allowed ODIN to recognize it. I DID NOT NEED TO BUY A USB JIG.
1. Make sure you have Odin already downloaded and ready to go.
2. Remove the SIM and SD Cards
3. Load up Odin and make sure it is up and running on the computer. DO NOT plug your phone into the computer yet.
4. Reinstall the Battery and plug the phone to the USB cable to the computer.
5. Hold down both Volume keys and then push and hold the power button
6. Keep holding the buttons until it goes to black, KEEP HOLDING A SECOND TIME until it goes to black and the icon comes back on.
7. Now when it goes Black the second time release the Power button only.
8. You should now be in Download mode. The key is holding the buttons, letting it go to black once, and then letting it go to black again, and then release only the power button while your fingers are still on the volume buttons.
9. Now Odin should recognize the phone on a Com port (turn yellow).
10. You are now ready to return it back to stock.
I hope this helps!
did you ever get your infuse fixed man?
Sent from my SAMSUNG-SGH-I747 running CM10 JB 4.1.2 using xda premium
Yes I tried to make my own jig but my fat shaky hands could get the end of the wires to hit the correct contacts so I ordered one online and that got me into download mode! Now I'm running jelly bean! Thanks to everyone that helped out I love you guys!!!! PS. Don't skip backing up your efs folder!! Unless you want a headache. But with all my problems it has taught me a lot. My number one tip is to read read read there is always an answer! Thanks again everyone! Always hit the thanks button its the least we can do for all of these brilliant hard working developers.
Sent from my SGH-I997 using xda app-developers app
I have like many, played with my Android for 2 years now. I have a bricked Infuse GB (finally toyed with it to its death last week), so I pulled out my old Froyo unrooted backup. I rooted with SuperOneClick - easy. I made some kernel tweaks in Rom Toolbox Pro, and also changed a few status bar icons. I did several reboots and all was running well. I did need to adjust some more tweaks but I saved those for my next big change, when I decided to.
...look into more of what I could do and downloaded the zip file for Voodoo Sound. I read that this could do wonders on my Froyo stock rom and was compatible - actually, I read fairly safe. So I can't say if this caused this or not. It could have been my lack of booting after each simple change, font, notification icons..etc. But I didn't do much more before I flashed Voodoo Sound
I downloaded SGS Kernal Flasher from the market, and when I flashed and it booted, I got the SAMSUNG screen. Then followed by a new black screen with GALAXY S GT-I9000 in white with Samsung logo on bottom. And it stays frozen. I cannot enter recovery mode or download mode to my knowledge - or should I say, experience.
Since this was my backup and what I was doing seemed relatively harmless Im a bit shocked. I loved that my font and icons were changing, something I couldn't do with my gingerbread infuse using rom toolbox pro.
So now I am stuck on a bootscreen I've never seen before, nor intended to flash if that is what happened. Was this flashing Voodoo Sound or was it my negligence with other? I just rooted this yesterday after getting too frustrated to fix the GB. I don't think I had but 4 apps downloaded and really left most of the build.prop stuff alone beyond some minor adjustments for battery life.
So I'm stuck on a boot screen with a phone model I am not familiar with, cannot get into download mode or into recovery mode. I had a TWRP Recovery zip file I never set up yet, never got CWM recovery working - regardless, I just started playing with it so I'm lost as I thought I could just wipe, reinstall packages and reboot fresh. I hate this to be my first post, but I usually find all the answers I need from you guys and I appreciate all the efforts you put into this site to help noobs like myself from creating disasters. I just didn't know what to do and if I'm not hard bricked, I don't want to end up that way.
I thought unrooting would work, but I can't get into the phone so it won't connect to the computer. Also, when plugged in, it shows a battery frozen at zero. I know it's probably charging but that must mean I messed up something that starts at boot. Anyone willing to help me resolve this issue and get me back on so I can make phone calls again - something I should probably stick too, haha. But sometimes, mistakes are the best teachers...so maybe I'll learn something easy from the pros here.
Well u have the wrong kernel flashed some how
I would try a different computer and go for the heimdall package to take phone back to stock.
As soon as you do get to download mode and I know it sucks with bad kernel flash I did before my self. Gotta just keep trying ..... If you got power u can get download mode.
For more information go to qkster thread ...
Sent from my SGH-I997 using xda app-developers app
Prometh1216 said:
Well u have the wrong kernel flashed some how
I would try a different computer and go for the heimdall package to take phone back to stock.
As soon as you do get to download mode and I know it sucks with bad kernel flash I did before my self. Gotta just keep trying ..... If you got power u can get download mode.
For more information go to qkster thread ...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you, I'll search that out. Well, I thought bricking was more potential, but if I can do a recovery on both that'd be great. I backed all up to laptop and gdrive before - and actually thought about leaving it "new". As my first root and tweaking, or "modding" out the GB was great. And I never picked Froyo back up, but I just wiped it and rooted it yesterday, and I only used it for a month when I got it (long story with phone provider and a dent on the side (but I have two Infuses,Froy and GB)
But I am going to stay away from flashing. That got the GB...but since you brought up the power option. I thought they were toast. If it takes me a few days to learn, I'd do it in a heart beat - they both have power and that means I can get them both working. The GB has a PC on left, Phone on right and a triangle in middle. I didn't read into fixing that - which I thought would be tougher than grabbing my other. Maybe I can get both working and get some more insight.
I appreciate it, and anyone else who inputs. I'll start reading into that other thread after dinner, cross your fingers for me. :fingers-crossed:
I cannot find the specific thread you were directing me to. But I was successful after many attempts to enter download mode. It is being recognized but unable to access the insides of my phone. If I click reboot from download mode (volume down), it boots to the stuck Samsung logo. If I push up, it's in download mode, but I have nothing to send commands to it as it's not being recognized beyond the Samsung USB composite.
Can someone direct me to where the thread may be about the frozen/stuck Samsung boot logo? Also, frozen 0% battery level but charged all night.
I'm trying to find something specific on this but it's difficult being an Infuse Froyo and I'm stuck on the Galaxy S GTI900 which was never there before my last reboot - obviously whatever I flashed was probably for the Galaxy S. I get SAMSUNG, then the Galaxy S screen...can't seem to get into recovery because it's too fast before stuck again.
Take out the battery, put it back in do not turn it on hit volume up and volume down plug in USB that's the download mode you are looking for
Sent from my GT-P3110 using xda app-developers app
Sorry everyone for this annoying post but I have done research enough to think that I may be out of luck so you guys are my last hope here.
Here is the senario;
I have been running Cyanogenmod 12 (courtesy of Sultan). Once the ROM was discontinued I decided to give Paranoid 5.1 a shot. I downloaded the new rom, suggested SuperSU and Gapps and booted to the most up to date TWRP. I flashed the rom, then supersu, and finally Gapps and then rebooted my phone. The phone stayed in the boot screen for about 45 minutes (maybe even an hour) so I powered off the phone, pulled the battery, and attempted to boot back into recovery using the power and volume buttons but nothing was working. The phone would just keep vibrating (pulsing) until i let the buttons go and then jump right back into the booting screen until I turned the phone off again. Hopefully I am doing something wrong and there is an easy fix but Im afraid that I now havae a brick on my hands.
Please help,
SuperNewb
[Update]
Now the phone will hold the boot screen for a couple minutes then the screen just goes black. Not sure what that means.
Also, just so you guys dont think im too ignorant, I will say that I I have flashed at least 10 different ROMs before this so I would like to think that I have a decent understanding of how this all should work.
Odin to stock and start over. See vincom's stickies.
Sent from my Nexus 5 using XDA Free mobile app
Sorry everyone for this annoying post but I have done research enough to think that I may be out of luck so you guys are my last hope here.
Here is the senario;
I have been running Cyanogenmod 12 (courtesy of Sultan). Once the ROM was discontinued I decided to give Paranoid 5.1 a shot. I downloaded the new rom, suggested SuperSU and Gapps and booted to the most up to date TWRP. I flashed the rom, then supersu, and finally Gapps and then rebooted my phone. The phone stayed in the boot screen for about 45 minutes (maybe even an hour) so I powered off the phone, pulled the battery, and attempted to boot back into recovery using the power and volume buttons but nothing was working. The phone would just keep vibrating (pulsing) until i let the buttons go and then jump right back into the booting screen until I turned the phone off again. Hopefully I am doing something wrong and there is an easy fix but Im afraid that I now havae a brick on my hands.
Please help,
SuperNewb
[Update]
Now the phone will hold the boot screen for a couple minutes then the screen just goes black. Not sure what that means.
Also, just so you guys dont think im too ignorant, I will say that I I have flashed at least 10 different ROMs before this so I would like to think that I have a decent understanding of how this all should work.
Finally got back into recovery using advise from this post
http://forum.xda-developers.com/showthread.php?t=1769102
hopefully a traditional whip can get me back on track
I had to use ODIN, go back to stock rom, reflash TWRP and then install paranoid. But were all good now. Sorry guess I didnt do as much research as I thought.
Help
harrisd23 said:
I had to use ODIN, go back to stock rom, reflash TWRP and then install paranoid. But were all good now. Sorry guess I didnt do as much research as I thought.
Click to expand...
Click to collapse
i made a factory reset and my phone doesn't want to pass the "upgrading app"