Hands Free Activation Fix - Touch Pro2 CDMA

SPRINT PHONES ONLY
Let me preface by saying I no longer own a TP2. So I cannot say it works 100% for all phones or anything. However the fix was developed in partner with HTC. So take that for whats it's worth. I ran into the HFA issue when I was camping last July and in a weak, low signal area. Had to hard reset when I was back in the "real world" and wait a day for my phone to work right again. I ended up getting an EVO in October and forgot about this.
However on SprintUsers, member MSU94, found this info while searching for a solution. Just thought I had to let ya'll know. Hopefully this will help people with the issue. Says it's not a guaranteed fix, but works for most. Hopefully some of you will benefit from it. The directions say to download the files from their site and it will prompt a soft reset. I don't know if you can just run the cabs, I assume you can. I attached them just in case. There is a 6.1 and 6.5 version, so be sure to use the proper cab.
If I helped, throw a thanks my way. Use these at your own risk of course.
LINK---> http://www.hchb.com/downloads/TP2Fix.htm
Info from site
Sprint HTC Touch Pro 2 Hands Free Activation Fix
Here are the two HTC FIX products for resolving the Hands Free Activation error on your device. These are ONLY for Touch Pro 2 Devices on the Sprint network, do NOT use on any other devices. Please download the correct file, depending on the Windows Mobil version installed on your device. See instructions for further details. Important Note: The device will automatically soft reset upon finishing installation.
Instruction for Downloading HTC Fix for the Hands Free Activation Issue
For Sprint Touch Pro 2 Devices ONLY
When and Why a device would need the HTC Fix
HCHB would like to make you aware of an issue with the HTC Touch Pro 2 devices on the Sprint network which can cause the device to enter Hands Free Activation (HFA) mode inappropriately. A device that has entered HFA mode will be sluggish and various applications, including PointCare, may not open. These symptoms are not to be confused with common slow performance and or battery length issues.
It appears that this issue occurs most frequently when the device is being used in rural areas or when the device attempts to reconnect to the Sprint network after being out of the coverage area. HCHB has collaborated with Sprint and HTC engineers to develop a patch to stop the HFA from invoking in these instances. The patch appears to be effective in most, but not all, cases. Therefore, we urge you to inform your Sprint HTC Touch Pro 2 users to regularly sync and back up their visits, especially if they frequent rural areas.
Where to find the HTC Fix
Please go to HCHB.com/downloads on your device, and download one of the two HTC Fix files.
Additionally, it’s IMPORTANT that you download the correct version of the HTC Fix. Depending on which Windows Mobil version you have (6.1 or 6.5) on your device, will determine whether you should download the 6.1 or 6.5 HTC Fix. On the site you will see two HTC Fix Downloads, please download the file that corresponds with the Windows Mobil version you have.
In order to find out which Windows Mobil version you have on your device, please follow the iteration path below on your phone:
Start–Settings–All Settings–System (could be a tab or file)–About
How to Download the HTC Fix
First you must navigate to the download site on you device, and then double click on the HTC Fix you wish to download. You will be asked by the device to allow the file to download, please allow it. At the end of the download the device will inform you that it must SOFT RESET it order to finish downloading, please say yes, your device will soft reset automatically.
Once the device boots back up, your phone will be finished installing the HTC Fix!

thank u very much. will try

No problem. Hopefully this has resolved the issue, or kept this issue from happening for you guys.

Related

NuB with a couple of questions...

Afternoon all,
This seems an excellent place for a new XDA IIi owner to start things off! Please forgive me if I repeat anything or if I am posting in the wrong place, just let me know and I will gladly fix it.
I'm just at this stage trying to get used to the XDA and add value to it by means of software and customisation to the extent I did with my P900 and P910i which I have been using for the past 2 years. In some ways I'm finding it quite hard to get my head fully around the XDA IIi?! I actually started out with the IIs a couple of weeks ago but found it to be way too unstable and too much of a problem so I jumped over to the IIi. So far things have been better but I have a few "things" I would like to ask in the hope that someone can help me.
Erm.. where to start...
1. Ok, O2 branding, the O2 active stuff and the icon in the title bar. Can it be removed? Currently my O2 icon is just a blank whit square, it never displays properly and just makes the phone look, well, pants!
2. The headset supplied with the phone seems awful! I get lots of complaints about volume fluctuating. Does anyone else find this?
3. Can you actually just turn the phone off?? If so... how?
4. When listening to music, I cant put the phone into "sleep" mode, ie turn off the screen whilst still having the music play. Is there a way around this?
5. I use AAC music files too, I have Betaplayer which obvioulsy plays them but I cant make the phone recognise an AAC file and associate it with betaplayer... is this possible? Currently I have to open the player then open the file.
6. Firmware. Gulp.
I updated my P9xx's regularly, not without issue I suppose though! Do you guys recommend regular firmware updates?
Currently I have:
ROM Version 1.10.00 WWE
ROM date 12/24/04
Radio Version 1.00.00
Protocol Version 1337.39
ExtROM Version 1.10.124 WWE
Any advice on f/ware would be greatly appreciated. It can be such an ordeal but if its recommended I would like to do it really.
There are more things but maybe I should be quiet now and see if anyones got any comments!
Any help would be gratefully received and as soon as I get up to speed I will put back into this forum.
Thanks
Fronty.
1) The o2 branding software can easily be removed. I myself have wrtten a couple of replies to this sort of thing and so have others. If you do a search for "o2" "activeUI" "remove", you'll find the steps needed.
2) I've only used the headphones for using the phone once or twice apart from the first XDA I ever had. If you go to start > settings > system > Microphone AGC and enable the auto volume, this may help. Noone's complained about my voice being too quiet or fluctuations since I got an XDA2, never mind the 2i I have now.
3) If you tap the network signal strength, there is the option to "Turn on flight mode" - this is phone OFF. More indepth explanation of this is included in the manuals you should have with your phone. If not, I believe o2 do a .PDF you can download from www.o2.co.uk/xda
4) If you're using WMP10 then I know what you mean. On the XDA2 I used to be able to select the Contacts button as "screen off", but whenever I try this on WMP10 on the 2i it won't map the button. I prefer to use a third party program called Pocket Player 2 from Conduits (http://www.conduits.com/products/player/). It's fantastic, highly customisable and the only drawback is that it's not free. Well worth the money though. And you can turn off the screen and map other buttons during playback.
5) Can't help you on that one.
6) I always update mine once the official update from o2 comes out, though I must admit I've presently got one from the Australian o2 comparable i-Mate. It's a slightly more stable ROM but is sometimes tricky to install. There are instructions on these forums on doing it - I followed them myself. Currently there are NO official updates for you to upgrade to; you are on the most recent o2 ROM. You'll soon know when one exists, if not already from the http://www.my-xda.com/xda2i_soft.html page.
Hope this helps, please post back if you need further help.
Cheers
Ant

HTC Bluetooth Hot Fix

Hi,
HTC today posted a hot fix for bluetooth at their e-Club.
Description:
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Br,
Mads
Downloaded it from HTc.cOM
Installation instructions
Follow the instructions below to download and install the hot fix on your device:
Make sure you have Microsoft ActiveSync® installed on your Windows XP PC or Windows Mobile Device Center on your Windows Vista® PC. You can find Microsoft ActiveSync from this link or Windows Mobile Device Center from this link.
Connect and synchronize your device with your PC via Microsoft ActiveSync® or Windows Mobile Device Center using the USB cable.
To download thehot fix, first select the check box below. Next, select thehot fix and the desired FTP site then click Download.
Copy the hot fix, which is a cab file, to your device.
To install the hot fix, tap the cab file and follow the on-screen instructions.
Here is the file:
http://rapidshare.com/files/77588898/TyTNII_BT_Hotfix.zip
Enjoy,
Nadavi
Extracted madsnm's posted cab, which is the same as nadavi's. This is a replacement file for OEM\OEMDrivers\TIInit_4_2_38.bts (a.k.a. \windows\TIInit_4_2_38.bts for non-chefs).
I've re-attached it as the naked file (without the cab installer or the self-extracting exe installer).
Any decent chef should be able to figure out how to turn a single file into an OEM package
Edit: Forgot to add that there are no registry entries, as I've already created registry dumps before/after install...
Edit3: It *IS* the same as the one in the AT&T 1.60 ROM. I did a file compare and there are no binary differences.
Although I am not having any problems as mentioned in the fix log, but the idea of HTC releasing something for us is great .
taiseer999 said:
Although I am not having any problems as mentioned in the fix log, but the idea of HTC releasing something for us is great .
Click to expand...
Click to collapse
Thats right!
Waiting for WM6.1 ROM! or maybe new WM06 Full Touch rom from HTC....
Just my two Cents....
Nadavi
Nadavi said:
Thats right!
Waiting for WM6.1 ROM! or maybe new WM06 Full Touch rom from HTC....
Just my two Cents....
Nadavi
Click to expand...
Click to collapse
well, 6.1 ROM doesnt really looks appealing to me, i believe most of us would want our freaking D3D driver to improve our kaiser speed.
come'on HTC, give us our driver. We want our kaiser to work @ its full potential!
almost forgot, to the brothers at the top 3 post, THANKS for sharing!
Solved my "bad" connection to the BT carset - thx....
ruffruff said:
well, 6.1 ROM doesnt really looks appealing to me, i believe most of us would want our freaking D3D driver to improve our kaiser speed.
come'on HTC, give us our driver. We want our kaiser to work @ its full potential!
almost forgot, to the brothers at the top 3 post, THANKS for sharing!
Click to expand...
Click to collapse
OT but the driver is there. Look here for more info. There's also an XDA thread on this. We just need to tweak it out for general purpose acceleration.
Sleuth255 said:
OT but the driver is there. Look here for more info. There's also an XDA thread on this. We just need to tweak it out for general purpose acceleration.
Click to expand...
Click to collapse
It doesn't say much if they hacked something for Coreplayer, or it was a general fix from HTC for all Windows Mobile devices running the MSM chipset.
Would be nice if the Kaiser was as snappy as that dual-keyboard Pantech running WM6 Standard.
I'm at loss to say if all the UI (and general system) lag is from too much use of .NET, lack of hardware accelerated graphics drivers, or Pro just runs slower than Standard because of the touch-screen support.
Hmm...wonder why i didn't get an email from the e-Club about this. I log into the site and find the fix just fine but I thought I'm supposed to get a notification about it (i'm pretty positive that was my preference when signing up)
Anyway, does this hot fix help in pairing bluetooth with car kits and devices that had problems or were incompatible thus far.
I've never experienced dropped calls with my BT connection, but I do have another problem that is pissing me off.
I have two different Pioneer stereos in two different vehicles. The AVIC-Z1 and the Premier DEH-P980BT.
When I first try to initiate a call with the 980, the connection is made, but the audio is somewhere in limbo between the phone and car speakers. There is a BT connection, but it takes about a minute and a half to actually start sounding through the speakers. By that time, the receiving end has hung up.
Since it only happens for the first call of the ride, I've been getting in the car, calling my voicemail, and waiting until I can hear the voicemail prompts. After that, I can make and receive call normally until I shut the car off.
If this fixes the problem I'm having, I'll be ecstatic.
Hi,
I have no noticable problems with BT exept the sound quality. Will be anything better or maybe worst if I install this upgrade? Does anybody have experience on it?
Thx
Mikus
NuShrike said:
It doesn't say much if they hacked something for Coreplayer, or it was a general fix from HTC for all Windows Mobile devices running the MSM chipset.
Would be nice if the Kaiser was as snappy as that dual-keyboard Pantech running WM6 Standard.
I'm at loss to say if all the UI (and general system) lag is from too much use of .NET, lack of hardware accelerated graphics drivers, or Pro just runs slower than Standard because of the touch-screen support.
Click to expand...
Click to collapse
Sounds like they had to change something with the drivers. So they're there but poorly implemented. And sounds like they'll give us driver info once its released. I'll buy it if it fixes the D3D support!
Still garbled on my Tilt with an Infinity G35..now how do I deleted the Kai6492_HotFix from my Programs directory? I can't see to find it...yet the icon is still there. Any one know?
Flapjack said:
I've never experienced dropped calls with my BT connection, but I do have another problem that is pissing me off.
I have two different Pioneer stereos in two different vehicles. The AVIC-Z1 and the Premier DEH-P980BT.
When I first try to initiate a call with the 980, the connection is made, but the audio is somewhere in limbo between the phone and car speakers. There is a BT connection, but it takes about a minute and a half to actually start sounding through the speakers. By that time, the receiving end has hung up.
Since it only happens for the first call of the ride, I've been getting in the car, calling my voicemail, and waiting until I can hear the voicemail prompts. After that, I can make and receive call normally until I shut the car off.
If this fixes the problem I'm having, I'll be ecstatic.
Click to expand...
Click to collapse
here's what causes that issue on my phone:
hit the ms voice command button and hear the beep prompt.
now hold the button down till you get the cancel beep.
now make a call. you will get no audio either direction.
turn the phone off, and the sound starts working. turn it back on and it's gone again.
key the ms voicecommand button again and let the time expire instead of holding to cancel.
make another call, and the audio will be fine, except for a 5 to 10 second delay.
see if this is how your phone behaves also. if I don't ever cancel a ms voicecommand by holding the button down, everything seems to work fine.
After installing the "fix" I could no longer use voice dial with any of my bluetooth headsets. Uninstalling the fix fixed it.....go figure.....
I think that HTC really need to have more, serious, knowledgable beta testers to tryout this stuff with various software and hardware scenarios before releasing the device. Some of these "bloggers" that they send new, unreleased devices to are either cronies or don't know much, or will not test the devices thoroughly and/or report back to HTC what problems that they experienced. I am a Verizon and AT&T user. Have seen these anamolies between diferent devices for some time now. The Mogul and XV6800 don't have the same issues we have, however, I guarantee you they do have others such as the De-activated GPS flaw that happened recently in the Mogul.
Unfortunately my Kaiser didn't work still with this hotfix. I installed on my device few times, I rebooted the headset and nothing. Probably it's like that because my ROM is 1.83, it's original polish version of it. How can I resolve the problem of bt headset ?
The fix file is a CAB (download from HTC e-club)... I install the CAB and find a link under software menu... I tap it... and another installation is done... I must soft reset the device... and stop...
Okai... so I think in this way the fix is gone... but... I have yet the cab installed under Software CAB and Installed application... can I uninstall it? The trashes pissing me :-D
or for att users go here....
http://forum.xda-developers.com/search.php?searchid=8811535

HTC s640 Windows Mobile 6.1 Release Date?

Hi folks,
Does anyone have information RE: the release date for WinMo 6.1 for the HTC s640? The Touch got its update a few weeks back, can we expect the same?
Telus is promising an update for RevA capability, I assume this will come with 6.1.
Im interested to know as well, been waiting.. and waiting... and waiting and getting very tired. When will we enjoy the upgrage?
Pretty stupid we haven't seen an update for the S640 yet! Telus doesn't even have any 6.1 Smartphone Standard devices... something that I find awefully wierd considering their promotion of WM devices and smartphone in general. This is seriously stupid. Even the old crusty S620 has the WM6.1 upgrade kicking around for it!
ya, new update came out.
and it's a wm6 update.
lol
nice telus.
I just installed the update on my phone. GPS still doesn't work for me; a Telus rep told me it would be included in this update.
No WM6.1 and no GPS. I am very disappointed by this.
quick update... I was able to get GPS working on my s640 using the instructions/apps found in this post: http://forum.ppcgeeks.com/showthread.php?t=36639
When using the GetSPC app on your phone, enter your HEX ESN in the top input box, push the left key twice until you don't see a cursor, then click the middle button. There is an "invisible" go button that the s640 doesn't display in this app... it should generate your SPC in the lower box.
I'm able to use both Gmaps and Live Maps w/ GPS now.
Enjoy!
I can verify Tatusmi success with his GPS, I updated my s640 via HTC's website, and followed along the instructions from the link he provided and the SPC program (after figuring it out it was case sensitive).
Good work Tatusmi, a feature that should have always been active now works.
I got the above to work )for a telus s640(. (although I lost everything on my phone because my activesync was messed).
But the HTC update to 3.0 worked great. The GPS enabled instructions worked flawlessly. I got google maps to find 10+ gps signals and was able to find my location.
but, I can't get TOMTOM to work. Won't find the internal GPS
NAV4all just sucks.
I am working on Garmin mobile XT to try it out - but I keep getting stuck with it triing to find a bluetooth unit. And it doesn't give the option to choose internal or com port or nothing.
any ideas?
nevermind, I got garmin to work.
Just couldn't get it to work automatically with some card id or something.
had to open garmin. go to settings -> about -> and the cardid is listed there.
once that is good, everything shows up properly.
I can write WM6.1 rom for s640. My ICQ - 731889 - write to me.
strik3r, I don't use ICQ anymore... can't you post here or use PMs?
Glad I could help you guys with the GPS!
I dont know about anyone else , But id be more excited to see Android on this device then 6.1 .... dont get me wrong winmo is a good plat. But Android would be killer ..
Ive been doing a little research .. and the Htc Vogue has a android version running and you can fallow the few steps to get it running with haret . well kinda .
Anyway just curious to know if anyone else has had any luck with linux on this device or anyone willing to help getting linux running on this device .
L8r
I've received confirmation from telus that they're not going to upgrade the Iris's rom. apparently there were compatibility issues, but i don't buy it.
I think someone should do this themselves, much akin to what seems to have been done in the other forums to other phones aka the 620. I'd do it but I really have no idea where to start.
monofonik said:
I've received confirmation from telus that they're not going to upgrade the Iris's rom. apparently there were compatibility issues, but i don't buy it.
I think someone should do this themselves, much akin to what seems to have been done in the other forums to other phones aka the 620. I'd do it but I really have no idea where to start.
Click to expand...
Click to collapse
I also received confirmation from Telus that this phone would never see WinMo 6.1, nor would any of their other existing WinMo Standard devices.
The line they gave you about compatibility is bull though, I called HTC about it and they said there is absolutely no reason why this phone can't run 6.1, it has more than the minimum required hardware.
I'd love to see a cooked version of 6.1 for the phone, but I also don't know where to start. I also don't use ICQ anymore so I can't seek out striker's help. Andrioid would be neat too, I don't have any experience with it... but anything is better than tired ole WinMo 6.
Well what a pissoff. 6.1s so nice. Makes me angry I didn't get a touch
IT WORKS on TELUS S640 with GOOGLE MAPS!!!
Thanks for all the information , I could not locate the driver that was listed in c:\windows\system32\drivers so I found drivers that work. Awsome, thanks everyone. Just a side note to take the phone out of diagnostic mode just ##3424 then hit "send" (same as to put into diag mode).
Confirmation on S640 GPS
i just want to confirm, so the s640 tweak for the gps, worked for telus s640.
i just need to confirm that once this is done, i would be able to use google maps to get my location using the internal gps of the phone or how ?
cause right now i am using a bluetooth gps to get navigation on my winmo. with out having to do anything to the Registrer or any other tweaks.
can you please confirm
typhoonk said:
nevermind, I got garmin to work.
Just couldn't get it to work automatically with some card id or something.
had to open garmin. go to settings -> about -> and the cardid is listed there.
once that is good, everything shows up properly.
Click to expand...
Click to collapse
I am wondering if you could help me in getting garmin to work on my S640, as i too am having problems with TOMTOM and GARMIN ?
do you have the REVA update for your phone?
and what have you done so far to get gps to work?

Sleepy Sprint CMDA after upgrade

I am having problems with a Sprint HTC TP2 after doing the 6.1 to 6.5 upgrade. I have had it into Sprint repair twice and hard reset it about 6 times. There are two problems I am encountering:
1) for about 2 minutes to 30 minutes at a time I cannot turn the unit on. The flashing green light is out during this time. I can call the phone and it wakes up, but you cannot wake it with any of the buttons. The reset button does not work either. You can pull the battery and that will reset it. Sometimes in this phase the white light behind the hard keys will light if you pull out the stylus, not always.
2) at random times the phone software gets really slow. For example, the flippity floppty clock animation will hang up and not move for 30-60 seconds, then it will move a little and eventually it will catch up. Other apps will do similar things, the clock is the obvious because of the animations.
This has occurred even right after a hard reset, within a few minutes. With no additional apps loaded (as Sprint told me the first time that was the problem.)
Sprint unofficially told me to downgrade it back to 6.1 using a variety of websites to follow, and officially told me to contact HTC support and gave me their 800 number.
Thoughts? Anyone else having this problem? Advice?
Being a Sprint corporate employee at a service and repair center, continue to go into the store if it is convenient for you to do so. Every eTicket they create builds a case for them to replace your TP2 with a new one. I would strongly suggest using Microsoft MyPhone to back up your information so if they do swap you out, you just need to log into MyPhone and sync your information.
The issue is with Sense
I experienced the same issues with the Sleep of Death in the device and had to remove the batteries everytime I finished a call. I got tired so I reflashed the phone, set it up and hard reset it again.
The problem persisted. I would have to click on the windows buttom and then could not click on the Today or Settings tab( I woud just hang there!) Then I disabled the SENSE UI and worked with the 6.5 default settings and no more lockup issues. Also, installed SPB Mobile Shell and it worked for 3 days without issues.
This makes me suspect the SENSE and HTC apps are causing the lockups. I am interested if other people are experiencing these issues. I installed MAX Manilla 2.5 two days ago and the device seesm to be stable. The only time I have issues is when I update the contact tab. It locks up, but that is not a function of Max Manilla but the core HTC contact app.
Had my phone for a week with Sense 2.5 and WM 6.5, stock. No problems like the ones mentioned in the thread yet...
It all depends on what you use your phone for. Try my ROM, see link below...
Sprint 6.5 Rom issues
There have actually been some similar issues with the new sprint 6.5 however, not to the extent of the phone having actually been stuck in sleep mode. Some things I can recommend that may help is to check your task manager frequently because programs don't fully close when you exit out of them. In addition to this you should consider installing cleanram which helps clear up memory. I’m not allowed to post the link because I’m still a new member however just follow this thread...
xda-developers > Windows Mobile Development and Hacking > Windows Mobile Apps and Games
[APP]htcAddicts - cleanRAM v2.1 (RAM Cleaner)
Also, there seems to be an issue with the manila 2.5 sense and the htc clock, if you have the htc clock open it can run sluggish at times..But I recommend that you pull up you quick tabs and minimize your htc clock for the sense 2.5 to run faster. Lastly keep the stock plain black screen saver because if you use a custom or different background the system can run slower.
I too also have the sprint tp2, and the 6.1 rom is considered to be one of the fastest and most stable rom for cdma tp2s. However, the downfall is the downgrade :/...
I have also worked for sprint corporate repair center, what might help and save you time before going to the repair center would be to call the technical support to see if they could solve your issue. Because by doing this a ticket is already created and the tech will be able to see the troubleshooting that was done. In addition to this repairs can be difficult and frustrating at times due to the fact that the problem that you’re having must be repeatable in order for sprint to repair or replace your phone (it really depends on the repair center). If you find that you continue to have errors with your sprint 6.5 rom, I would recommend trying other Roms to see if the issue is in fact the rom or the device...
Hope this can help!
-am
Sprint 6.5
Thank you for the good advice. I took my device into a store and they did the usual hard reset ( cannot reproduce the issue) process. I sat there and activesynched with Exchange server , made a call and had the phone locked up two times. I do have over 1000 contacts in my list ( Business, clients and my consultants!)
The tech said he had never seen this issue and ordered me a new device.I use the Clean Ram and task manager programs. I also ran a process explorer in the device and it finds Manilla to be the culprid of the issues. So I have installed Mobile Shell and am using that until my replacement arrives.
As I sat in the store there were 4 people with HTC TP2 with unresponsive screens. All 6.5 roms.
Sprint WM6.5
I have no idea what all the hype was about or what I'm missing in this upgrade. IT'S HORRIBLE!!! It's almost 10% cosmetic and 90% buggy. In my opinion, WM6.1 was stable, fast, and professional looking. The upgrade has done nothing for me in terms of productivity. It has turned my phone into a cartoonish, VERY sluggish, and a freeze worthy POS!!! I despise this upgrade, the colors, the themes, and most of--the stupid, sloppy, rolodex-like clock.
Anyone know where I could find the necessary information to 'downgrade' back to WM6.1???
jsonc78 said:
I have no idea what all the hype was about or what I'm missing in this upgrade. IT'S HORRIBLE!!! It's almost 10% cosmetic and 90% buggy. In my opinion, WM6.1 was stable, fast, and professional looking. The upgrade has done nothing for me in terms of productivity. It has turned my phone into a cartoonish, VERY sluggish, and a freeze worthy POS!!! I despise this upgrade, the colors, the themes, and most of--the stupid, sloppy, rolodex-like clock.
Anyone know where I could find the necessary information to 'downgrade' back to WM6.1???
Click to expand...
Click to collapse
WM6.1 is always faster than WM6.5. Besides WM6.1 has sense 2.1, which is faster than sense 2.5.
Downgrade 6.1
PPC geeks has the stock roms...
I still cant post links yet :/ but goto PPC geeks..then click on forums..from there scroll down to where it says htc device and click on touch pro 2...then click on cdma tp2 upgrades...then scroll down nd you should see a forum thread that says STOCK ROM collections..once u click that it provides u a link for the sprint 6.1 rom and many others...hope this can help!
-am

[Q] Device reset on incoming call

Hi,
does anybody knows, where could be bug? When I establish data connection on my raphael, any incoming call or message in most cases cause reset of device. I have no idea, what to check on..
kaliginium
kaliginium said:
Hi,
does anybody knows, where could be bug? When I establish data connection on my raphael, any incoming call or message in most cases cause reset of device. I have no idea, what to check on..
kaliginium
Click to expand...
Click to collapse
Can you give more informatiom?
Is your phone GSM or CDMA?
What ROM are you using?
Have you added any other apps?
Hi! It is important if you can tell us if this is a newer problem or if this had always been the case with your device. Also, if this always happened to your knowledge, can you tell us when you had acquired the device?
Here are a few suggestions:
1) If you can back up all your files/contacts/etc. and try to flash the stock ROM, assuming you are using the original ROM. It could be possible that software could be affecting it. This would be best to wipe evrything away and begin with a cleaner slate.
2) How about, if you can do this on your own, try to install HardSPL, and flashing it to a customized ROM. Chances are if there is a bug in the stock software it could be coming from the stock ROM that is being used (if the first way does not work for you).
3) could it be a virus? I would suggest to install an anti-virus program (I use Lookout Mobile for Windows Mobile - its free and has a pretty good security suite). I can't say how effective its anti-virus program is but it has been pretty good for me. Even install one that is only a trial (ESET for Mobile, Kaspersky for Mobile, etc.) and have it scan your device. If anyone know how good Lookout Mobile is please let me know!
4) Could it be a radio firmware issue? I am not too familiar with this I would hope someone can answer this and maybe they can help you get the proper radio verison and flash it (I believe that you would need to unlock the BIOS - HardSPL basically - to ensure safe flashing of the radio firmware).
5) If the software is not a problem, chances are it could be a hardware issue, as in maybe the GSM chip is bad. I would be more inclined that it is a software problem rather than hardware but you can not rule out hardware.
This is assuming that you are using the GSM version (not CDMA version as I believe there is a separate forum for that).
I hope i am able to help you! Yes I agree with johnjctt1 - It could be an application you have installed that would be simple enough to rememdy, maybe try uninstalling each app, beginning with the newest one you had installed, and try data/voice simultaneously to see if an app was causing the reboot of the device.
Good luck and let us know the progress! This is the best advice I can give you without knowing a little more about your device. johnjctt1 was correct in asking those set of questions. I love how we all can support one another!

Categories

Resources