Related
HOWTO : Flash the Huawei Ascend to stock
These directions are for metroPCS the next post contains directions for Cricket
Fastboot Method
(Note:This method will work even if the phone will not start or go into recovery)
Download the Following Package:
MetroPCSStock Recovery Package with Scripts
678041208774eab0aed1005f287d71ab MetroStockRecover.7z
1)Attach phone to USB
2)Power Phone Off
3)Enter Fastboot (End Call + Volume Down - while phone turns on)
4)Run script relevant to your OS
metroPCSStock-linux.sh
metroPCSStock-mac.sh
metroPCSStock-windows.bat
5) Your phone will automatically reboot
WARNING: Only the linux version has been tested. All other versions should work though. DO NOT power off the phone during the process.
Nandroid Method
(Note:Working custom recovery is needed for this method)
Download the Following Package:
MetroPCS Stock Nandroid Backup (Phone Right Out of Box)
663fab87380e87c8c158a2f5d0c4495e MetroPCSStock.7z
1) Place nandroid backup files into a directory on sdcard:
/nandroid/mem=211M/stock/
2) Boot into recovery (Send Call + Volume Up - while phone turns on)
3) Go to Backup/Restore.
4) Select Nand restore
5) Select mem=211M
6) Select folder named "stock"
7) Proceed with on screen instructions
Directions
These directions are for Cricket the previous post contains directions for MetroPCS
Force Update Method
(Recommendation : When the OS of handsets could not start up successfully)
Download the Following Package:
Cricket Stock Recovery Package
d97ed410ffa518c689e2444d21007daa M860V100R001C153B251SP03.zip
1) Copy "dload" folder to SD card
2) Switch off the handset ,then press "Volume Control Upper Key +End Key+ Power Key"
3) Showing successful
4) Remove battery one second ,then power on ,waiting till the os start up
Normal Update Method
Download the Following Package:
Cricket Stock Recovery Package
d97ed410ffa518c689e2444d21007daa M860V100R001C153B251SP03.zip
1) Copy "dload" folder to SD card
2) Settings--SD card & Phone storage--Software Upgrade
how do i download this?
I did it, and it worked! but theres no signal?
neko423 said:
I did it, and it worked! but theres no signal?
Click to expand...
Click to collapse
Thats strange, try dialing *228, tell them I sent you and you'll get a free pizza.
neko423 said:
I did it, and it worked! but theres no signal?
Click to expand...
Click to collapse
Can you post back and let us know if you were able to get your signal back and the phone working?
Thanaks
semyazza said:
To flash your metroPCS phone back to stock.
Download the Following Package:
MetroPCSStock Recovery Package with Scripts
1)Attach phone to USB
2)Power Phone Off
3)Enter Fastboot (End Call + Volume Down)
4)Run script relevant to your OS
metroPCSStock-linux.sh
metroPCSStock-mac.sh
metroPCSStock-windows.bat
5) Your phone will automatically reboot
WARNING: Only the linux version has been tested. All other versions should work though. DO NO power off the phone during the process.
Reserved for future use. Directions on how to flash to come. In the mean time please check the post above for the available files.
Click to expand...
Click to collapse
I am assuming those users like me that have already rooted and installed AmonRA could use your nandroid backup to recover to stock "out of the box"?
Can you give directions for doing that?
Thanks,
opsguy said:
Can you post back and let us know if you were able to get your signal back and the phone working?
Thanaks
Click to expand...
Click to collapse
well so far is still searching for service.
neko423 said:
well so far is still searching for service.
Click to expand...
Click to collapse
Do you have "bars"? If so dial *228 and speak "Update Roaming List" when the menu prompts you to. That will update the PRL file. You should NOT need to do this though unless you did other things to your phone.
My guess is that you flashed the cricket update? If that's the case let me know and I will guide you through the process of manually programming your phone to metro.
opsguy said:
I am assuming those users like me that have already rooted and installed AmonRA could use your nandroid backup to recover to stock "out of the box"?
Can you give directions for doing that?
Thanks,
Click to expand...
Click to collapse
Better directions are on the way. I just have no time to post them today. I will update more directions tomorrow and gradually make the directions better.
General Idea though is copy raw nandroid files to sdcard to a folder within the folder "nandroid" boot into recovery and select the option to flash nandroid backup.
semyazza said:
Do you have "bars"? If so dial *228 and speak "Update Roaming List" when the menu prompts you to. That will update the PRL file. You should NOT need to do this though unless you did other things to your phone.
My guess is that you flashed the cricket update? If that's the case let me know and I will guide you through the process of manually programming your phone to metro.
Click to expand...
Click to collapse
I have no bars ..
and idk if thats the case.
opsguy said:
I am assuming those users like me that have already rooted and installed AmonRA could use your nandroid backup to recover to stock "out of the box"?
Can you give directions for doing that?
Thanks,
Click to expand...
Click to collapse
I need this too! This is my exact setup. I uninstalled google talk, couldn't use the market, found new apk files to install, got it working again, but still get fc's in the market now and then. So I'd like to start from out of the box knowing what I know now!
If you have a custom recovery installed already. My guess would be to do the following to resore.
1. Drop the files to your sd card in a folder structure somewhat matching nandroids structure. /nandroid/mem=211M/Stock/.
2. Boot into recovery (press and hold vol up and send then press power)
3. Go to Backup/Restore.
4. Select Nand restore
5. Select mem=211M
6. Select Stock(if thats what folder you named it).
7. Follow the instructions on the screen.
I haven't actually done the restore but, I did do the steps up to but not including the actual flashing. There was also a recovery image in the nandroid backup. I removed it on my card so I wouldn't overwrite my custom recovery. You can do whatever you want.
foltz61 said:
If you have a custom recovery installed already. My guess would be to do the following to resore.
Click to expand...
Click to collapse
Pretty new to all this, so if I do a full nandroid backup of my current system, then try this, and sumthin doesn't work right, I can restore my current system back to the way it is before the attempt? Scared to be the first one to try this.
Also, do I need to copy every file in the archive? Or just the .img and md5?
I tried something similar but never could get it to restore the stock nandroid. I didn't try to rename it though...
S.I.™ ©®77
morningsidesanitarium said:
Pretty new to all this, so if I do a full nandroid backup of my current system, then try this, and sumthin doesn't work right, I can restore my current system back to the way it is before the attempt? Scared to be the first one to try this.
Also, do I need to copy every file in the archive? Or just the .img and md5?
Click to expand...
Click to collapse
Thats what is supposed to happen as long as the custom recoveries (ie Amon-Ra and/or Clockwork) were ported to our phones correctly. I would remove recovery.img so your custom recovery partition isn't overwritten.
foltz61 said:
Thats what is supposed to happen as long as the custom recoveries (ie Amon-Ra and/or Clockwork) were ported to our phones correctly. I would remove recovery.img so your custom recovery partition isn't overwritten.
Click to expand...
Click to collapse
Now all we need is a guinea pig...hehe. I'm still scared.
Metro pcs
HOWTO : Flash the Huawei Ascend to stock
These directions are for metroPCS the next post contains directions for Cricket
Fastboot Method
(Note:This method will work even if the phone will not start or go into recovery)
Download the Following Package:
MetroPCSStock Recovery Package with Scripts
678041208774eab0aed1005f287d71ab MetroStockRecover.7z
1)Attach phone to USB
2)Power Phone Off
3)Enter Fastboot (End Call + Volume Down - while phone turns on)
4)Run script relevant to your OS
metroPCSStock-linux.sh
metroPCSStock-mac.sh
metroPCSStock-windows.bat
5) Your phone will automatically reboot
WARNING: Only the linux version has been tested. All other versions should work though. DO NOT power off the phone during the process.
I tried this for my phone more than once but how can it boot the info automatically when the computer canot detect the phone during fastboot?
babblescreef said:
HOWTO : Flash the Huawei Ascend to stock
These directions are for metroPCS the next post contains directions for Cricket
Fastboot Method
(Note:This method will work even if the phone will not start or go into recovery)
Download the Following Package:
MetroPCSStock Recovery Package with Scripts
678041208774eab0aed1005f287d71ab MetroStockRecover.7z
1)Attach phone to USB
2)Power Phone Off
3)Enter Fastboot (End Call + Volume Down - while phone turns on)
4)Run script relevant to your OS
metroPCSStock-linux.sh
metroPCSStock-mac.sh
metroPCSStock-windows.bat
5) Your phone will automatically reboot
WARNING: Only the linux version has been tested. All other versions should work though. DO NOT power off the phone during the process.
I tried this for my phone more than once but how can it boot the info automatically when the computer canot detect the phone during fastboot?
Click to expand...
Click to collapse
You need the correct drivers for your operating system. Use google or the forum search feature.
Every fellow ascend user if we want the souce code (to make custom rom's)
ever1 please make an email to Huawei's email.
Their email is [email protected]
The email was not found by me.Just trying to help so we can get source code.
I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot
MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App
Why ji6? What are the benefits other than the audience chip will work?
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
If its going to the stock recovery, its working fine! when you are on stock recovery menu, choose install packages (or whatever it is) and that will get you into clockwork recovery.
But its not loading to clockworks revovery. It just goes to standard start up when that option is selected.
correction
Sorry correction- I try that, and it says "signature verififaction failed- installation aborted." Why?
cpkfolief2 said:
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
Click to expand...
Click to collapse
why are you using ROM manager to flash the recovery if your on SMX ? SMX has bali 2.2 in it wich has CWM built into the kernel so your recovery should be the RED voodoo CWM recovery by default. and if stock blue recovery is coming up for some reason yu should be able to reinstall packages cause SMX has the modded stock recovery already
No no no, I'm not on smx- I'm trying to install the darn thing. I'm still on the stock rom. When I boot into recovery there are 4 options-
Reboot now
Wipe data
Wipe cache
Install packages
When selecting install packages, it fails via signature verification. There are no cwm recovery options available, either.
ooh .. your problem is you have to be rooted which im sure you already are ..
then go to the CWM thread in the DEV section and apply the modded recovery to system/bin . this will make the recovery ignore the signature check so you can flash CWM then SMX
use root explorer or adb push this file
http://dl.dropbox.com/u/2993191/recovery
to /system/bin
then put this file on the root of ur sd
http://dl.dropbox.com/u/2993191/update.zip
and put maximus x rom on ur sd
reboot recovery
reinstall packages
now ur in cwm
- Wipe Data/Factory Reset
- Wipe Cache Partition
Go to mounts and storage
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM
install zip from sd
choose zip from sd
look for maximus x rom install and u should be good
after you flash, go back to mounts and storage (before rebooting) and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
this is as easy as i can put it
Thank you very muych for your persistence to help! I am a noob and cannot find the ty button. I'm a newb, I know.HOWEVER....…I am not a newb to this in general, and I have tried that already. I read that forum . Duh!this is what happens when trying to move the file to sys.bin:
Root explorer says:
Paste operation failed-
Does not say why. I found a solution! Another forum says to downgrade to stock recovery e2, then cwm will work. But I have to get odin and crap. So if there is something I'm STILL missing, and can't move the file there for that reason, don't hesitate to enlighten me.
you need to move the modded recovery to /system/bin/recovery, anything that tells you to downgrade is not correct, as we do not have anything to 'downgrade' to. The modded recovery from Krylon does the same thing. you should be following this:
1. download the recovery.zip from krylon
2. extract the .zip and copy the recovery file to your sdcard
3. use root explorer to copy the recovery from the sdcard to /system/bin/recovery
if it fails, make sure that /system is mounted as read write, rather than read only, there should be a button in root recovery to mount read/write.
Thank you sir! I was comitting a syntax error... maybe by attempting to copy the file from the wrong directory. No, the downgrade works... I was reffering to e2 recovery for samsung rather than e3 which requires signature ver. But that takes waaaaaay longer. So thank you. I was trying to copy the whole zip, rather than the actual file because I thought I had extracted it(stupid). But yeah. Ty! Will see if cwm works now.
Glad to hear that it worked for you, let me know how cwm works out for you, as well as whatever parts come after that for you. Don't forget the Thanks button if someone helps you
The files are in their proper places, all is right.
But when I boot into recovery, I am startled with fright!
For its still normal, its still stock-
So help me ill throw this phone like a rock!
Haha. But seriously. Still same issue.
FAILS TO INSTALL ANYTHING
"Signature verification failed- installation aborted."
It seems I will have to do it the hard way by installing e2. This was this issue for the galaxy s.
Why does no one else with a sidekick have to do this!!!!? Why is it not giving y'all signature verification errors! Why is there no video yet?
Sig verification issues relate to the recovery. it should still look like stock, as the original CWM is a fake flash. Make sure you have the cwm update.zip from Krylon's thread in your sdcard.
It is!!!!!! I think I'm going to cry.
Recovery is saved (overwrite) as instructed.
Update is on sd card as instructed.
Can't be corrupted, deleted files and tried again.
Boot into recovery and stock shows (as it should.)
Re-install from package (only option other than data wipe and reboot)
Whole signature failure
Signature verification failure
Installation aborted. :'(
i'll make you a script and a zip of everything to do this for you later, but that won't be until a bit later, still have to drive my girl home. in the meantime, can you try redownloading the cwm from ayo's original post? also, have you tried the rom manager version of cwm?
Roger that.
And it would be greatly appreciated. If it is, however, just another list of the instructions as mentione previously in this thread, or in the original rom post, forget it. But if there's something new then sure. Heck, a video would be great. I'm sure I wouldn't be the only one watching it either. And I will redownload all of it again(non-existant jesus christ) and try again in the meantime. Thank you again for your effort and supporth surely it must be that I am the only on with this issue. So I am unique on xda! Silly video...
i could even go so far as to skype someone to SHOW them ive got it right or what i have done, in which case i would hope for an "ah ha!now that thurz ya problem right thur neow."
Ok, I have a script for you, it's semi-tested? I already have root in my adb, so I can't test it as well, but it should work. let me know what happens. just unzip this, and run the run.bat.
this will reboot you into recovery after it's done, so make sure you're not doing anything on your phone when you run it.
https://sites.google.com/a/stephenduvick.com/www/files/sk4gtestoneclickroot.zip?attredirects=0&d=1
Credit to Noobnl for the original script, and krylon for the fake flash.
So how exactly do I run the run.bat? Its not an exe or script file... is there a command list I need to put in? (Gawd, the last custom rom I installed(cliq xt) was so much easier, before there even was a clockwork mod. It was easier, and that was when it was the hard way!) And my phone is already rooted, sure that doesn't matter though.
I rooted my device and tried to install a custom ROM. But something got messed up and I had to unrooted the device and restore it to factory version with an RUU given by Hack Ace.
After restoring the device, Market doesn't upgrade to Google Play. I tired to restart and it did not help.
I'm now running GingerBread 2.3.3 with a HTC Sesse 2.1
Can anyone help me with what is wrong?
Try logging out of google if you haven't or look for the google play apk file and install it should be one floating around here somewhere
Well just read through and see if this helps
http://forum.xda-developers.com/showthread.php?p=24416330
Or go into settings apps then look for you market app clear data cache if u can and try going back onto your market and see if that helps
My Inspire
i was able to install Play Store by downloading the Vending app from Media fire.
Thanks for the Link though.....it has lot of useful information in it.
kandalaphani said:
i was able to install Play Store by downloading the Vending app from Media fire.
Thanks for the Link though.....it has lot of useful information in it.
Click to expand...
Click to collapse
Awesome.. ? for you why did you go back to stock or are you planning to root again?
when i tried to flash the new ROM from ROM Manager...it left my Phone in a wierd state and i was not able to access Gmail or Play Store.
This is the first time i tried to root and Flash a new ROM and i am not exactly sure about the recovery process. So i decided to RESET everything. I am now looking into more videos and articles and videos to get familiar with the process. I would certainly try rooting again ASAP.
kandalaphani said:
when i tried to flash the new ROM from ROM Manager...it left my Phone in a wierd state and i was not able to access Gmail or Play Store.
This is the first time i tried to root and Flash a new ROM and i am not exactly sure about the recovery process. So i decided to RESET everything. I am now looking into more videos and articles and videos to get familiar with the process. I would certainly try rooting again ASAP.
Click to expand...
Click to collapse
Well I never used the Rom manager aka clock work mod to flash a rom. Alway down load it and drag n drop to the sd card and boot into recovery mode and flash but you have to have cwm first and flash it to the recovery mode which there fore allow you too boot up into recovery with out issues.
Well once you do root again look me up. I can help with some basic info if I get time I can post or message you with some steps that I do that could help you out.
My Inspire
CYRAXDroid said:
Well I never used the Rom manager aka clock work mod to flash a rom. Alway down load it and drag n drop to the sd card and boot into recovery mode and flash but you have to have cwm first and flash it to the recovery mode which there fore allow you too boot up into recovery with out issues.
Well once you do root again look me up. I can help with some basic info if I get time I can post or message you with some steps that I do that could help you out.
My Inspire
Click to expand...
Click to collapse
Sure...Thanks for your time..
kandalaphani said:
Sure...Thanks for your time..
Click to expand...
Click to collapse
Hey no worries.. once you flash roms and get into kernels scripts etc its not all that bad
My Inspire
So this is an idea of what I do when I flash a rom and some other ideas/tips.
Getting Started or Flashing A Rom:
Once you root your phone (this is not in any order really) you should get ROM Manager aka Clock Work Mod. Once you get that, open the CWM and the first top half you will see flash clockworkmod recovery make sure your on wifi I would at least for the updates. You will see a dialog box click desire hd. This will allow you to make back ups of your settings that you made when you flash a rom its always a good idea to make your backups its a life save!! So, once you made your back up and this is what I do.. I plug in my phone to the pc switch to disk mode which will let you see whats on your sd card. Since you flash the CWM and recovery you will see on your sd card a folder called clockworkmod open then backups folder you will see you back that you made, drag and drop that backup file that you made to your fold that you made on pc to save it for later. And thats pretty much how I save my backups of roms etc.. Now if you need to load that back up just plug phone in disk mode cwm fold>backup drag and drop back up that you need. And boot into recovery mode and select back up and restore and select restore and the file boot and your good..
I would download which Rom I would like to use. Save it to pc to a folder that I have made that I store all my roms, backups,radios & rils, kernels..etc.. just to keep myself organized. Once you get your rom just drag and drop it to the ROOT of the sd card do NOT add it in any folder thats on the sd card. Once you have it on the card just boot into recovery flash your rom.. Other then that its easy to flash the rom.. And when you get all your settings set up make a back up and when done save it to the pc and delete it from the sd card if you dont want to keep on the card I do that..
When it comes to battery life it depends on what the rom.. But I like to use killers http://forum.xda-developers.com/showthread.php?t=1305228&highlight=killersolth scripts for the kernels.. For me I always flash a different kernel upon flashing a new rom. For me having the kernel and killers script is the best combo for me to have for performance and battery life.. now since I have inspire I use the uv lites scripts.
For the most part flashing radios & Rils you would never really need to do that so I wouldnt recommend it for now maybe later but read about it its good to know what it does..
Other sides which I for got to add.. When you flash a new rom its always good to wipe user data.,cache, delvik it makes it for a good clean install with other roms..
Also the desire HD thread which the inspire can use the roms from that thread to.
Well I hope this helps you in any way.. if you need help PM me best of luck
Hi guys
It has been a long time since my phone has been this bad.
So last night I go to charge my phone because I had ZERO battery. So I turned it on and then plugged it in. The phone booted fine but then I noticed that the screen was not shutting off. I even tried hitting the "Go to sleep" button from the pull down menu and nothing happened. I also realized the phone was not loading my calendar. When I went into the file manager it didn't show SDCARD 1 or 2.
I decided to clear the memory (dalvik + cache) = SAME PROBLEM
I did a factory restore = same problem
Finally I cleared the system = now i have no OPERATING SYSTEM ON THE PHONE
I went to the external sd card and tried to install the latest version of OMNI....IT SAYS IT CANT READ FROM THE SD CARD.
I also tried to copy the file from external sd to internal sd card and it says FAILED
I don't' know what to do...
I am using Team Win Recovery Project 2.6.3.0
I have the latest omni rom on my external sd card. I can see it but install fails.
Please help :crying:
mfisher0 said:
Hi guys
It has been a long time since my phone has been this bad.
So last night I go to charge my phone because I had ZERO battery. So I turned it on and then plugged it in. The phone booted fine but then I noticed that the screen was not shutting off. I even tried hitting the "Go to sleep" button from the pull down menu and nothing happened. I also realized the phone was not loading my calendar. When I went into the file manager it didn't show SDCARD 1 or 2.
I decided to clear the memory (dalvik + cache) = SAME PROBLEM
I did a factory restore = same problem
Finally I cleared the system = now i have no OPERATING SYSTEM ON THE PHONE
I went to the external sd card and tried to install the latest version of OMNI....IT SAYS IT CANT READ FROM THE SD CARD.
I also tried to copy the file from external sd to internal sd card and it says FAILED
I don't' know what to do...
I am using Team Win Recovery Project 2.6.3.0
I have the latest omni rom on my external sd card. I can see it but install fails.
Please help :crying:
Click to expand...
Click to collapse
Calm down dear. Same happened with me. I formatted /system and find that I don't have any operating system in my mobile.
Just pluggin your mobile in recovery mode to your PC. transfer the file-> Flash the ROM-> Gapps -> BINGO..
BTW, wrong area for creating a thread.
Don't worry. Do what D™ said.
Alternatively you can use "adb sideload" method. I used it once with Philz recovery. In sideload method, you won't need to copy the file in Sdcard. File existing on pc can be directly flashed. This would help if you still face problems copying file to Sdcard. Search it on google. You will find steps for it.
A bit more clear please...
D™ said:
Calm down dear. Same happened with me. I formatted /system and find that I don't have any operating system in my mobile.
Just pluggin your mobile in recovery mode to your PC. transfer the file-> Flash the ROM-> Gapps -> BINGO..
BTW, wrong area for creating a thread.
Click to expand...
Click to collapse
Hey
Ok I am a bit calmer knowing I didn't brick my phone or anything...
But when I connect my phone to my computer I know it is connected (I see GTi9103 in device manager with an "!" ) but I cant transfer files.
Could someone provide a link to the adb method or maybe give a bit more advice on this problem..
Thank you guys!
mfisher0 said:
Hey
Ok I am a bit calmer knowing I didn't brick my phone or anything...
But when I connect my phone to my computer I know it is connected (I see GTi9103 in device manager with an "!" ) but I cant transfer files.
Could someone provide a link to the adb method or maybe give a bit more advice on this problem..
Thank you guys!
Click to expand...
Click to collapse
It must installed drivers.. If u cant access the storage, just flash ics via odin and further known actions.
Sent Using my MOTO© G® from Tapatalk Pro - D™
Thanks dude! I will give it a try and post a response! It was just so strange that I couldn't see any of the drives (sdcard 1 or 2) in filemanager. I guess something must have got corrupted? Right now I am trying to push from adb method mentioned from Nikhil.
I am following this procedure.
http://hackerspace.lifehacker.com/how-to-install-a-rom-via-sideload-1505153925
PS. the android SDK is massive!
ADB FAIL
ADB IS WAY TOO complicated for me right at this moment (actually exhausted).
********Can someone provide me with a ICS download link? *******************
I'm going to try out the ODIN method
http://forum.xda-developers.com/showthread.php?t=1406664
again thanks to ALL who are constantly helping out!
mfisher0 said:
ADB IS WAY TOO complicated for me right at this moment (actually exhausted).
********Can someone provide me with a ICS download link? *******************
I'm going to try out the ODIN method
http://forum.xda-developers.com/showthread.php?t=1406664
again thanks to ALL who are constantly helping out!
Click to expand...
Click to collapse
Download Stock Indian ICS
Btw, adb sideload method is as follows.
0. Install adb for windows (assuming you have windows). (There shouldn't be any driver missing)
1. Enter into sideload mode in recovery
2. Open cmd in computer with the directory in which zip file is kept. (shift + right click -> open command prompt here would do)
3. Enter adb sideload xyz.zip
Thats it.
I've tried it with TWRP recovery in my friend's phone. It didnt work. But When I tried with Philz recovery, It worked well.
Anyway, if you are finding it complicated, flash stock ics.
Edit : Did you try "mount usb storage" in recovery? because it is required to do. else computer won't recognize your device.
success!
OK so I successfully flashed via ODIN....Can I directly flash omni now? I am assuming yes...Can I flash it through ODIN?
Also can you recommend any good versions of ICS? It is really quite a bit faster than omni...
AGAIN thank you all
mfisher0 said:
OK so I successfully flashed via ODIN....Can I directly flash omni now? I am assuming yes...Can I flash it through ODIN?
Also can you recommend any good versions of ICS? It is really quite a bit faster than omni...
AGAIN thank you all
Click to expand...
Click to collapse
Omni is best until now.
you can't flash omni via odin. Flash Philz or TWRP first and then flash omni.
Lv5 ZCLPD is best ICS Rom. But I would choose Omni over Lv5,
reinstall twrp?
Nikhil said:
Omni is best until now.
you can't flash omni via odin. Flash Philz or TWRP first and then flash omni.
Lv5 ZCLPD is best ICS Rom. But I would choose Omni over Lv5,
Click to expand...
Click to collapse
Do I need to reinstall TWRP>??
mfisher0 said:
Do I need to reinstall TWRP>??
Click to expand...
Click to collapse
Reinstall!
Not if you already installed it.
Read OP of discussion thread. Instructions are there. You will find everything you need.
ICS will faster for few days and then it slow down.. hang.. GB is best for our device..