Database Info

"Quiet Time" settings

I just moved to the Maxx from a GNex that I've been using Carbon Rom (and Liquid before that). These Roms had settings built in that allowed me to mute sounds other than the phone on a schedule. Is this somewhere in the settings I haven't found or do we need to use something like Silent Hours from the Play store?
If we need to use a 3rd party solution, is there something better than Silent Hours?
Sent from my XT1080 using xda app

Check out "Assist," which comes pre-installed in the app drawer. It has a sleep mode that mutes everything, but there are options to allow calls from favorites and/or anybody who calls twice within five minutes.

jvflynn said:
I just moved to the Maxx from a GNex that I've been using Carbon Rom (and Liquid before that). These Roms had settings built in that allowed me to mute sounds other than the phone on a schedule. Is this somewhere in the settings I haven't found or do we need to use something like Silent Hours from the Play store?
If we need to use a 3rd party solution, is there something better than Silent Hours?
Sent from my XT1080 using xda app
Click to expand...
Click to collapse
Totally agree on checking out Moto Assist already on your phone but I am still using Tasker for this and it is working great as always!

Can you point me in the right direction to set up Tasker without learning some wild mix of Cobol and Fortran ?
The issue I have with Assist is that callers need to call twice or be marked as a favorite. I'd like ALL calls to come through but leave everything else silent at night.
Sent from my GT-N5110

jvflynn said:
The issue I have with Assist is that callers need to call twice or be marked as a favorite. I'd like ALL calls to come through but leave everything else silent at night.
Click to expand...
Click to collapse
Llama can do that, and it's a lot easier to set up than Tasker. After yo install it, change the Quiet profile to have a normal volume ringtone and a zero volume notification tone (Llama will try to protest that post-ICS that these volumes are linked, but you can tell it to set the volumes normally, as we all know they are discrete on the Maxx), and then go to the Events tab and adjust the timing of the Quiet at night event to how you want it to be (for timing; you an also delete the home condition if you like.)

jvflynn said:
Can you point me in the right direction to set up Tasker without learning some wild mix of Cobol and Fortran ?
The issue I have with Assist is that callers need to call twice or be marked as a favorite. I'd like ALL calls to come through but leave everything else silent at night.
Sent from my GT-N5110
Click to expand...
Click to collapse
Here is my tasker profiles and task that I've been tweaking for quite a few years now. It turns on if you are charging by either AC outlet or wireless and turns off if any call comes in, cancel it via the notification or take if off charging. It auto turns back on if still charging and the call has ended.
I find this method better as opposed to time based silent mode, as the weekend my sleep pattern is a little bit later compared to the work week. Enjoy! :victory:

opt05 said:
Here is my tasker profiles and task that I've been tweaking for quite a few years now. It turns on if you are charging by either AC outlet or wireless and turns off if any call comes in, cancel it via the notification or take if off charging. It auto turns back on if still charging and the call has ended.
I find this method better as opposed to time based silent mode, as the weekend my sleep pattern is a little bit later compared to the work week. Enjoy! :victory:
Click to expand...
Click to collapse
Thanks for sharing! I've just loaded your profiles and task into Tasker... without Cobol nor Fortran!
I'll try this over the next few days and see how this works.
Sent from my GT-N5110

Not a problem! Let me know what you think or if you have any questions about them.

??? MOD: Disable red "Battery LOW" LED ???

Hello,
I am frustrated to have no more control over this option. Perhaps I am awaiting too much, but a simple switch to control the Battery Low led -> is that too much for Samsung? I can see the percentage in AOD, so I must not have the LED blink when battery is low.
Did anyone find out how to disable only that message? Truely I can disable all messages (set the complete LED to off) but this I don't want.
Thanks @ all
Dirk

ChAoSWK said:
Hello,
I am frustrated to have no more control over this option. Perhaps I am awaiting too much, but a simple switch to control the Battery Low led -> is that too much for Samsung? I can see the percentage in AOD, so I must not have the LED blink when battery is low.
Did anyone find out how to disable only that message? Truely I can disable all messages (set the complete LED to off) but this I don't want.
Thanks @ all
Dirk
Click to expand...
Click to collapse
I would also like to be able to disable this and the charging status led setting. It was available on previous Samsung phones before the s6 series but for some reason they removed the option under led setting and changed the option to either have the led on or off.

amar95353 said:
I would also like to be able to disable this and the charging status led setting. It was available on previous Samsung phones before the s6 series but for some reason they removed the option under led setting and changed the option to either have the led on or off.
Click to expand...
Click to collapse
Xposed > gravity box
Sent from my SM-G935F using Tapatalk

Brava27 said:
Xposed > gravity box
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Not looking to root my phone. Waiting for Samsung pay to be released here in the uk.

amar95353 said:
Not looking to root my phone. Waiting for Samsung pay to be released here in the uk.
Click to expand...
Click to collapse
The don't ask for customizations on touchwiz. Good luck with Samsung pay. Hahahaha
Sent from my SM-G935F using Tapatalk

Tasker with "Samsung LED Controller" Plugin from PlayStore
There you can disable Charging Led, Low Battery Led, Missed Event Led and Voice Recording Led without Root

Brava27 said:
Xposed > gravity box
....
Click to expand...
Click to collapse
Never seen gravity box before. Installed Gravity Box [MM] and tested some functions. Because it is for AOSP the most functions does not seem work.
But disabling Battery LOW Led seems to work, now I am on 15% and no LED is on
Thank you in advance

if you are root , you can try gravaty Box ,and it have this control. but i hope you know the harm of root.

ChAoSWK said:
Never seen gravity box before. Installed Gravity Box [MM] and tested some functions. Because it is for AOSP the most functions does not seem work.
But disabling Battery LOW Led seems to work, now I am on 15% and no LED is on
Thank you in advance
Click to expand...
Click to collapse
I also customized the buttons, long press, double tap, etc... Removed media volume change, force media volume instead of ringtone, removed volume warning. There's lots of stuff
Sent from Toronto, S7 Edge on Bell

Brava27 said:
I also customized the buttons, long press, double tap, etc... Removed media volume change, force media volume instead of ringtone, removed volume warning. There's lots of stuff
Sent from Toronto, S7 Edge on Bell
Click to expand...
Click to collapse
Hello,
explecitely this are the things which are not working for me. I wanted to set long press on homebutton, but this does not work. Btw, surely I can confirm that the Battery Low LED is now disabled, but the green "Battery fully charged" LED seems also to be disabled, but for me this is no problem. Perhaps some interferences with my echoe rom V12?
Thanks

ChAoSWK said:
Hello,
explecitely this are the things which are not working for me. I wanted to set long press on homebutton, but this does not work. Btw, surely I can confirm that the Battery Low LED is now disabled, but the green "Battery fully charged" LED seems also to be disabled, but for me this is no problem. Perhaps some interferences with my echoe rom V12?
Thanks
Click to expand...
Click to collapse
Home button doesn't work. Everything else works. Just experiment stuff.
Sent from Toronto, S7 Edge on Bell

Schedule Always On Ambient Display to toggle off at night?

I enjoy the Always On display, but I don't want the battery drain while I'm sleeping. Does anybody know of a way to schedule it to toggle off? I wish it was an option in the Do Not Disturb menu.
Thanks.

BTW: I've tried to create a recipe in Automate, but I think their AOD option is in ref to the Galaxy S8.

I know this isn't really a great answer but I just turn my phone over so it's face down beside my bed. That way it turns the display off like being in my pocket.
Sent from my Pixel 2 using Tapatalk

I tried Macrodroid and it's AOD control didn't work for me. I do what marty does and turn it over now.

With the USB port taken by headphones at night, I can't plug in. So, I'm more concerned with battery consumption than ambient light.

marty_s13 said:
That way it turns the display off like being in my pocket.
Click to expand...
Click to collapse
Sorry. I missed that bit. Sometimes the easiest answer is the best.

Chargind led notification

Hi All
I just switched from an OP3 to an OP7.
I am missing very much the notification led for when the phone was charging... :'(
Any wau to go around that?
thanks
Reagrds
Luca

No for the moment... Same happened to me
There's an app called notify buddy but you'll miss ambient display

I saw the app, but I cannot add notification for gmail or for charging

I'm still waiting for my OP7 to arrive and I'm already missing the LED notifications..

I mean... how do you know if a telephone is charging without an LED?? :/

luca.costantino said:
I mean... how do you know if a telephone is charging without an LED?? :/
Click to expand...
Click to collapse
You can't... Just move the phone and see on ambient display if it's charging...
That also bothers me a lot buuut is one con vs a lot of pros for this phone. I hope some day there's an addon for ambient display (even on magisk module) to make a "notification led" under the notch

luca.costantino said:
I mean... how do you know if a telephone is charging without an LED?? :/
Click to expand...
Click to collapse
turn on screen saver when charging....... i set it to clock while charging so if it displays the time its charging.

aakarshmodi said:
turn on screen saver when charging....... i set it to clock while charging so if it displays the time its charging.
Click to expand...
Click to collapse
This workes for me sometimes only, its pretty weired. Sometimes it shows while charging sometimes not -.-
Android 10

Question GW4 raise to wake won't turn off unless I turn on power save

How do l stop gw4 raise to wake?

MKchrias said:
How do l stop gw4 raise to wake?
Click to expand...
Click to collapse
Under: Settings/Display
Turn off raise to wake

louforgiveno said:
Under: Settings/Display
Turn off raise to wake
Click to expand...
Click to collapse
It's turned off.

MKchrias said:
It's turned off.
Click to expand...
Click to collapse
Did you toggle it on/off?
Is setting in wear app reflecting the same setting on watch?
I'm not having this issue.
Perhaps its a setting in the watchface itself?

Settings are the same. Only thing that stops it is power save. It used to be ok, just suddenly changed.

I have the same issue. Same with the heart monitor lights. My watch 3, when it would go onto DND at night, all lights, display and sounds were off. Now when it goes into DND and you get "busy" in the bed, it looks like a freaking disco room! Even turning HR off completely and putting it in power save mode, theater mode or sleep mode, it still does it. Seems like a huge fail on a very basic long standard DND. And why when you put it in sleep mode, does it force the phone's screen in black and white???? What genius thought of doing that without any option to disable it????

Had watch update this evening,problem has been fixed