Related
I'm not expert enough to say this is the answer to a lot of people's problem -- but I'm going to throw it out anyway and hopefully some of the "really expert" people will jump in.
Several times when I have had major problems, I have found that the file structure/files/etc. on my tablet were messed up. Before I could reinstall, I had to re-partition, wipe caches, etc.
I read a lot of posts about people having major lockups or loops and then just trying to reload and reload software assuming that is the only problem -- and not getting good results.
It seems to me that if there is a serious enough malfunction to have to nvflash or do a major recovery -- it would be good to re-partition, wipe caches, etc. in case there is corruption or other structure problems.
What I think we need is for one of the gurus to make us a procedure for "Rebuilding the /sdcard File Structure" (or something like that. Repartition to 2048 and 0 --- and then what else? Which things need to be wiped, formatted, etc.
I'm pretty good a discerning what's wrong -- and I think some of these rebuilds are failing because of this problem.
Right? Wrong? Other ideas? Procedure?
Rev
P. S. -- Enough folks are having these problems right now that this could be an important help for them if I am right......
I PM'd, but the short version for the forum.
I've obviously seen a lot of issues with the TNT Lite 5.0.0, and I've whittled it down to two major problems. First off, not everyone reads instructions. This was fine pre-TNTL 5.0.0 as the instructions really were the same for every version preceding it. But 5.0.0 changed the playing field drastically. Which leads me to the my second point....
I think that some of us have been using mods for so long now that stock was no longer an option without an nvflash. Viewsonic, for example, had a bootloader update in December and I believe a recovery change with 3588. But since a lot of us have been using mods for months, we never got those updates. So, when the time came to revert back to stock, there were problems.
In some ways, TNT Lite 5.0.0 is almost like a tablet cleanup - it's the first update I've had where a stock pre-req was required, and the first one in a very long time where I added a stock bootloader and recovery.
nvflash and tnt 5.0
I tried to go 5.0 after i did nvflash and it instantly did an update ota so when I tried tnt 5.0 it got stuck at the birds for like 15mins, so I nvflashed again.
What am I doing wrong?
Charles77 said:
I tried to go 5.0 after i did nvflash and it instantly did an update ota so when I tried tnt 5.0 it got stuck at the birds for like 15mins, so I nvflashed again.
What am I doing wrong?
Click to expand...
Click to collapse
Not sure -- sounds like you did it correctly. nvflash to 2967, OTA to 3588 and then TNTL 5.00. You didn't install clockworkmod, correct? You need 3588 recovery for this to work.
oops yes I did. ok
Charles77 said:
oops yes I did. ok
Click to expand...
Click to collapse
That would do it. The reason why 3588 recovery is needed is because it updates the bootloader, whereas I believe clockwormod does not.
I'm kinda stuck here, and need some help...
A co-worker has this G-tablet, and gave it to me for the weekend, to load a custom ROM on it so she can watch Hulu and other videos on it.
I did my homework prior to touching ANYTHING, so I made sure it was at 3588 stock, then downloaded the TnT 5 images, along with nvflash and the stock image in case anything went wrong.
Got Tnt 5 up and running, but ran into the issue where it wouldn't sleep (required a reboot to work again). This wouldn't do, so I decided to downgrade to TnT 4.25. The hell started from there...
After flashing TnT 4.20, it got stuck on the birds boot screen. No worries I thought, just run nvflash and everything will be out-of-box new 'n fresh.
I have nvflashed this damned thing about 18 times now, and keep getting the problem where it will flash fine, then reboot fine. But if the unit is powered off or reboots, it gets stuck in APX mode, and won't do anything until it's nvflashed again.
Please help! At this point, I'll be happy just with getting back to status quo ante...
UPDATE: I forgot to mention: I'm accessing this G-tablet from a Win 7 laptop, to which I installed the nVidia USB driver.
darthbubba said:
I'm kinda stuck here, and need some help...
A co-worker has this G-tablet, and gave it to me for the weekend, to load a custom ROM on it so she can watch Hulu and other videos on it.
I did my homework prior to touching ANYTHING, so I made sure it was at 3588 stock, then downloaded the TnT 5 images, along with nvflash and the stock image in case anything went wrong.
Got Tnt 5 up and running, but ran into the issue where it wouldn't sleep (required a reboot to work again). This wouldn't do, so I decided to downgrade to TnT 4.25. The hell started from there...
After flashing TnT 4.20, it got stuck on the birds boot screen. No worries I thought, just run nvflash and everything will be out-of-box new 'n fresh.
I have nvflashed this damned thing about 18 times now, and keep getting the problem where it will flash fine, then reboot fine. But if the unit is powered off or reboots, it gets stuck in APX mode, and won't do anything until it's nvflashed again.
Please help! At this point, I'll be happy just with getting back to status quo ante...
UPDATE: I forgot to mention: I'm accessing this G-tablet from a Win 7 laptop, to which I installed the nVidia USB driver.
Click to expand...
Click to collapse
Hi,
I would hold off doing anything else until someone more knowledgeable posts some help, or maybe get on the irc channel.
There was another user, tcrews, who had what sound like the same problem. I don't know if he's still posting, but he had a thread "need some guidance", and I don't think he ever resolved it.
Sorry if this is not much help.
Jim
Deleted dupe
FIXED IT!
jimcpl said:
Hi,
I would hold off doing anything else until someone more knowledgeable posts some help, or maybe get on the irc channel.
There was another user, tcrews, who had what sound like the same problem. I don't know if he's still posting, but he had a thread "need some guidance", and I don't think he ever resolved it.
Sorry if this is not much help.
Jim
Click to expand...
Click to collapse
I FOUND A FIX!!!!
Link here: http://forum.xda-developers.com/showpost.php?p=12030351&postcount=14
I got my wish, now I'm back to status quo ante...
I sent tcrews a PM with this link, hopefully it'll fix his too...
darthbubba et all,
The files from otreblada that are in this download are the same files roebeet and others have provided -- just packaged together in one set.
To nvflash you have to have:
1. the files for the program nvflash
2. the .img, boot, etc. files
3. the USB driver files.
All of these are referenced and available in several places.
I am glad, however, that this might be a solution for some of you who seem to
have recurring problems.
Rev
I installed TnT 5.0.1 on my gTablet, and it's running like a charm. However, I would like to install Vegan-Tab 5.1.1 (or some other ones using ClockworkMod 0.8) and try a few things out. One of the caveats that Roebeet put in his TnT post is:
<quote>
- Also for 5.x.x users, flipping between mods will be more difficult, since 5.x.x changes the bootloader. To go to VEGAn, gADAM or any of the other mods will require an nvflash back to bekits 1105 image first, at least via the testing I've done.
</quote>
I have nvflashed the gTablet before when I accidentally semi-bricked it, so that's not the issue. (In fact, I found a rar somewhere with all required files in it---awesome!) My question is whether there is a way for me to make a full backup of my ROM (so TnT 5.0.1 with all apps and settings), so I can revert back to it should I choose to. Or is the only way for me to reinstall TnT 5.0.x fresh and then reinstall all apps (or restore them from Titanium backups)?
(I'm new to the Android world, so I apologize if there is an easy, obvious answer to this question.)
Thanks!
Ron
dutch_in_seattle,
As an early "nearly-bricker", I have been following 5.0.0 and 5.0.1 almost since the
beginning and have been trying to do all I can to help folks with problems. I also
have been trying to provide roebeet with material to help.
If I understand it well -- what roebeet has been saying is that the "3991"/5.0.0 stuff represents kind of a new generation and setup for the G-Tablet. It is the moving from the older generation to the newer that has caused all the problems.
The problems are that some of the underlying files have changed to newer versions and if you don't go to 3588 "completely stock" before going "up" -- you will have trouble jumping the gap!
I'm going to extrapolate from that -- that you should be careful going down too. If you are at 3991/5.0.x and want to go down, I would reload 3588 to make sure you
get a fully stock system with the older generation files -- and then I would install whatever old-generation rom you wish.
This is the best suggestion I can make based on several times up the system (with a couple of regressions nfflashing down for repairs!).
Good luck. Let us know how it goes.
Rev
EDIT: Thinking about it, I don't see anything wrong with my suggestion. But the quote with roebeet's comment to "nvflash back to bekits stock recovery version" probably
does add another layer of protection to the process. He certainly is more expert than me by far!
I've used nvflash before, so it's not so much that I'm worried I can't go back to Vegan-Tab or a different "older-generation" ROM. What I would like to do before going back is do a full system backup of TnT 5.0.1, with all my settings and apps, so I can easily revert to that Android environment if and when I want to, rather than having to reinstall TnT 5.x and then set up my environment again. I would normally restore using ClockworkMod, but you can't use this for TnT 5.x and I don't believe the new recovery mode has a restore option (but I could be wrong there).
Ron
I'm thinking you should be able to do a backup with the new clockwork recovery required for tnt, nvflash and start over with a new rom, then when you want to go back install tnt and the new clockwork from scratch and do a recovery from that point.
THIS MOD HAS BEEN RETIRED. This was a pre-release version based off of the vendor's UAT 3991 build. It was pulled shortly after it was released due to a large number of soft-bricks, and has never been reactivated. I am leaving this post up as a reference, only - and also leaving the supplement link up for current users who still need that.
----------------------------------------------------------------------------------
TwoTapsX is a an EXPERIMENTAL ROM for use with the GTablet. It is based off the vendor's "1.2" dev branch which replaces the bootloader on the device. What this means is that 1) you need standard recovery (not clockworkmod) to upgrade to the ROM and 2) you need standard recovery to backout to an older mod or old stock. Please read the instructions CAREFULLY and FULLY. Failure to do so can cause you to soft-brick you device. Viewsonic does not support this mod and will not help you!!!
---------------------------------------------------
REQUIRED Pre-requisites
If you are coming from a 1.0.1 or 1.1 stock ROM or mod, you need to be running the 3588 stock ROM, ESPECIALLY 3588 recovery. In other words, you need to be a complete stock device as that causes the lowest risk of soft-brickage.
Recommended Pre-requisites
1. Setup and learn how to use nvflash. This is your backout in case something bad happens, so I would highly recommend you understand how to use this, in advance. Link details: http://forum.xda-developers.com/showthread.php?t=861950. nvflash is specific to Tegra 2 devices only.
2. Setup and learn how to use adb. This is a standard Android tool that will give you a remote shell into the device. This is helpful to push and pull files, and do general troubleshooting. For example, you can do a data wipe within adb if your device boot loops by typing "adb remount" and then "Adb shell wipe data" and then reboot. A VERY helpful tool for anyone modding their device.
Information on adb and how to install it / use it can found in several areas in XDA, or on other Android sites. It's part of the Google Android SDK.
---------------------------------------------------
Installation:
The base mod has been PULLED, due to installation issues
---------------------------------------------------
Backout from TNT Lite 5 / TwoTapsX to TnT Lite 4.3.0 or 3588 stock:
Pre-requisite: You MUST have standard 3991 recovery. If you installed the 3991-friendly clockworkmod (see references below), then you need to remove it. The easiest way to do that, at the moment, is to reflash to 3991 standard recovery, using the reference update.zip (see the References area). If you did not install cwm, then you have 3991 recovery already.
Once standard 3991 recovery is confirmed installed, you can use any of the following ROM's to backout to a "legacy" 1.1-based firmware: 3588 stock, TNT Lite 4.3.0 or gADAM 1.3.0. You would just use the standard instructions for these (ie. add the update.zip and recovery folders to the root of your drive, and reboot into recovery).
I have tested all of these scenarios and the backout does work. However, as always, there is a risk here so I would HIGHLY recommend that you setup and master nvflash BEFORE you attempt backing out. That's just in case the backout fails and you need an emergency procedure to unbrick your device.
TO STRESS -- DO NOT, under any circumstances, backout directly to anything other than 3588 stock, TNT Lite 4.3.0 or gADAM 1.3.0, nor use clockworkmod as you WILL most likely semi-brick your device!!!
NOTE FOR TNT LITE 4.3.x -- recovery will be broken, after the downgrade. In this case, just run the Recovery Pack and you can fix it (see the TNT Lite first post, for details)
---------------------------------------------------
Downloads:
TwoTapsX .902 pre-release SUPPLEMENT only: http://www.mediafire.com/?k5x5if1qoeeh8u0
md5sum: be43c8a02474a0984d5f292ad55e35d4
Note: This is JUST the supplement, for TNT Lite 5 / TTx users only! I have NOT reactivated the base ROM. It has been pulled.
---------------------------------------------------
Your device is bricked, what to do:
See this post for details on nvflash : http://forum.xda-developers.com/showthread.php?t=861950
---------------------------------------------------
Reference Links
- Clockworkmod bekit v.8 only (1.2-3991 friendly) update.zip (for technical users only -- ONLY use with TnT Lite 5.x, 3991 stock or TwoTapsX!!!!): http://www.mediafire.com/?ykn3jwq7kvegc4g
This is a replacement for standard recovery. It adds the ability to backup and restore system images, for example. WARNING: YOU CANNOT BACKOUT to 1.1-based legacy mods with clockworkmod, you WILL semi-brick the device if you try. If you already installed this, then reflash to 3991 standard recovery, as mentioned below.
- 3991 standard recovery update.zip -- ONLY use with TnT Lite 5.x, 3991 stock or TwoTapsX!!!!): http://www.mediafire.com/?ripr3c96h55alg0
This will add the 3991 standard recovery back on a TNT Lite 5 / TwoTapsX system. You'd need this if you wanted a functional recovery to backout to 3588 stock, TNT Lite 4.3.0 or gADAM 1.3.0.
Extra placeholder, for future use.
I assume the theme around the new name for the rom is the next generation, or the 2nd generation of the custom Viewsonic Tap-n-tap rom.
It's a sad day in mudville, but it's probably for the best. Let's get this party started....
Woo Hoo! I'm nvflashing back to stock just for the fun of loading it all over again!
Uh Oh, ready the F5
Tegra devices and their bootloader/kernel combination differences are such a pain. This means that without a newer patch, pershoot's kernels won't work, right?
Butch1326 said:
I assume the theme around the new name for the rom is the next generation, or the 2nd generation of the custom Viewsonic Tap-n-tap rom.
It's a sad day in mudville, but it's probably for the best. Let's get this party started....
Click to expand...
Click to collapse
The initial pre-release will be the exact same code as TNT Lite 5.0.0 and 5.0.1 - I'll even keep the supplement. All I'm going to do is change the name so as to pull it out of the main TNTL thread.
So if someone has TNT Lite 5.00 and loads up this supplement, it will work just fine. And the name gets changed, too.
rothnic said:
Tegra devices and their bootloader/kernel combination differences are such a pain. This means that without a newer patch, pershoot's kernels won't work, right?
Click to expand...
Click to collapse
Correct. This is like a "Black Box" - isolated and on its own.
As a virtual middle finger I am gonna keep the name tnt lite 5.0.1 until a new supplement. Or release. Forces the change!!!!hahaha!!!
sigvader said:
As a virtual middle finger I am gonna keep the name tnt lite 5.0.1 until a new supplement. Or release. Forces the change!!!!hahaha!!!
Click to expand...
Click to collapse
A new supplement is already coming. Flash 10.2 just got released and it's actually a newer version that what got leaked.
Now I have a BIG problem, which is the problem I was trying to avoid with TNT Lite 5, which is supporting yet another build. I might have to freeze TNT Lite 4.25 until I know what Viewsonic is doing.
Again, keep in mind that if you have TNT Lite 5.0.0 or 5.0.1 you CAN update to TwoTapsX .9.02 supplement, when I build it. It will definitely work.
I realise that many people have had a very difficult, or impossible, time moving up to TNT Lite 5.0.0, and that it seems to be a frustrating, hit-or-miss situation, but I, for one, like 5.0.0, and i'm sticking with it, for now, at least. Everything is working-- ui is snappy, market is relatively complete, with full stars, camera works in both orientations, etc. In addition, it may be that VS sees this direction as its path to "Honeycreams", and if so, then we're perched on the right branch to take advantage of it. If they should abandon this path, though, I believe (hope) I have nvflash all ready to go in Win 7 just in case I need to jump back into the original roms. From what I've picked up in the 5.0 thread, VS MAY be preparing to release an update soon, and this will tell us (maybe) where they're headed.
Hopefully in a few weeks, we will know and either TNT Lite is going to phased out, or this pre-release will. They won't be supported for long - one of them is going to die.
Thanks Roebeet for all your efforts to keep the VS Gtablet alive. I have loaded up your TwoTapsx v.9.02 ROM on my Gtablet and it seems to be very stable. Looking forward to what VS has in store for us next. Knowing you and the other developers will take whatever VS dishes out and make it better for our Gtablets.
Again, thank you for all that you do....
Gramps
I agree. .. will stay with 5 until (if) it dies. Then will grieve!
Hi Roebeet...
This is your instructions to "backout" of TTx (which is the same as 5.0.1)
Backout (ie. to old stock, VEGAn, TNT Lite 4.x, etc):
I have successfully backed out of TTx in two ways:
1- Re-run a stock ROM. Specifically, I tested 3588. STOCK is important, as the bootloader will be downleveled to the necessary revision.
2- nvflash, using bekit's 1105 image.
In the case of stock, you might get stuck in a boot hang due to the possible need to wipe user data. So, I would recommend running the update.zip off a microSD so you can install clockworkmod .8 (old version) to give you the ability to wipe data.
Once you have old stock back, you'll be able to install older versions of TNT Lite, VEGAn, zPad, etc. as the bootloader is downleveled again.
using the new cwm thats on it now(blue writings) can we wipe data and cache, then put 3588 update zip and recovery folder on internal sd and things will resort back to stock with no snags?
thxs
mike
mikesal57 said:
Hi Roebeet...
This is your instructions to "backout" of TTx (which is the same as 5.0.1)
Backout (ie. to old stock, VEGAn, TNT Lite 4.x, etc):
I have successfully backed out of TTx in two ways:
1- Re-run a stock ROM. Specifically, I tested 3588. STOCK is important, as the bootloader will be downleveled to the necessary revision.
2- nvflash, using bekit's 1105 image.
In the case of stock, you might get stuck in a boot hang due to the possible need to wipe user data. So, I would recommend running the update.zip off a microSD so you can install clockworkmod .8 (old version) to give you the ability to wipe data.
Once you have old stock back, you'll be able to install older versions of TNT Lite, VEGAn, zPad, etc. as the bootloader is downleveled again.
using the new cwm thats on it now(blue writings) can we wipe data and cache, then put 3588 update zip and recovery folder on internal sd and things will resort back to stock with no snags?
thxs
mike
Click to expand...
Click to collapse
That should work. It's VS stock recovery, not cwm (it just looks like cwm). I added 3588 stock as an update.zip, with the recovery folder and ran it and it worked for me. The only caveat is that you might need a data wipe, so try to do that before you reboot after the flash update. The reason why is because 3588 stock doesn't have a "user data wipe" option in its recovery, so better safe than sorry.
I'm actually going to update the first post with that, as I think it's pretty important. Data wipes between old mods and this new one are pretty critical.
I just upgraded my 5.0.1 to .9.02 and I still have flash 10.2.155.67, where's the upgrade?
thxs Rb...
TTX and TNTL
I know it was a lot of work, but splitting the two right now is probably a good decision for novice users. The TNTL allows users with CWM to continue to flash between roms and backups until they are ready for the plunge to TTX. Thanks for all your work.
olddocwhite said:
I know it was a lot of work, but splitting the two right now is probably a good decision for novice users. The TNTL allows users with CWM to continue to flash between roms and backups until they are ready for the plunge to TTX. Thanks for all your work.
Click to expand...
Click to collapse
Honestly, when one of the moderators brought it up it made a lot of sense. TNT Lite 5 was a tough one and I kept hoping things would die down, but they never did. It was getting tough to keep it going as a "released" mod. I also didn't release how many users were still on TNT Lite and the impact it would have - I underestimated the user problems it would create.
joe2262 said:
I just upgraded my 5.0.1 to .9.02 and I still have flash 10.2.155.67, where's the upgrade?
Click to expand...
Click to collapse
You need to wipe data to get it - that's because the shell script won't (or can't) run if Adobe is already installed.
Alternatively, you can sideload it - it's under /system/etc in the supplement zip. Or, remove the old version and reboot and the shell script might re-install it (I think).
(At the request of management). Even with all the unsticking / mod intervention and warnings up the wahzoo, there are still a lot of user problems. It may return in a week , but for now it is PULLED. The moderators have hidden the thread, at least for the short term.
For those of you on TNT Lite 5 / TTx, just keep using it and no worries. Once we know where VS is headed, I will have a plan to either ask you to downlevel or upgrade. Again, depending on what they do.
EDIT: For those of you who had issues, could you please write up the steps you used before it failed? It would help everyone to understand why there are so many problems with this 3991 stock / TNTL 5 / TTx. From the posts and PM's I've seen, the majority have been either:
1- The device was flashed with clockworkmod to 3991/TNTL5/TTx and gets stuck at the birds or
2- The device was being prepped to stock 3588 and recovery was broken, after the 3588 reversion.
But I'm hearing that others might have applied all the proper steps and still had problems. We're trying to gauge just where the problem lies with this 1.2 UAT of Viewsonic's.
From my own device, I know that clockworkmod flat-out does not work. That's because the BCT partition is being touched by standard recovery, which clockworkmod does not replicate (and seems to be required). But as long as I have a clean 3588 stock ROM running on my device, I have not had an issue upgrading to 3991/TNTL5/TTx, it has worked for me 100% of the time.
Stock 3991 / TNT Lite 5.xx / TTx .9x backout instructions:
There are two way I know of to back out of these:
- Flash to stock 3588. This assumes you have NOT added clockworkmod and have standard recovery. I have done this several times and never had a problem. Stock 3588 link: http://forum.xda-developers.com/showthread.php?t=842000
- nvflash using bekit's 1105 image: http://forum.xda-developers.com/showthread.php?t=861950. This is still the best way to back out, as far as I'm concerned. You can do a full erase first, to wipe user data as well, thread is here: http://forum.xda-developers.com/showthread.php?t=974422
NOOOOOOOOO. Hopefully VS will decide what they are going to do by the end of the month. I am enjoying TnT Lite 5.0 with no issues at all. Thank you for all your hard work Roebeet, it is unfortunate that so many have had problems with this.
Damnnn, was about to install it
Really sucks that people have had problems maybe people should read and then re-read instructions instead of jumping into things and just assuming devs and mods can help them out. They have a life and dont think that after putting in all the work in to create something they want to hear from whiny a$$, irresponsible people that probably caused their own problem
Now people, like me, that wanted to install cant. nice.
thank roebeet tho and all the other g tab devs
I'm running two tap x. 9.0.2 with absolutely no problems. Never did have any problems from the beginning of 5.0.0. I'm am ferry close to being a noob, but I just had the instructions up on my laptop and followed them step by step. Will the new version of clockwork work to go back to 3588 if nessacery?
Thanks for all your hard work Roebeet. I barely use my laptop now that I have this tab.
One of the obstacles I've had in the last 2 weeks is that this is a UAT, not a released firmware from Viewsonic - so its validity is in question (and understandably so). If they release it with the same bootloader and upgrade requirements, it's going to shake things up here a bit.
I still think the odds are that they will - from their standpoint, they are only supporting stock users so, as long as they can ensure that a user is on 3588 stock, then the upgrade should work. In our case, many of the issues were either getting from a mod to 3588 stock, or using clockworkmod by mistake. Viewsonic doesn't have to worry about either of those issues.
But, there's still the X-factor -- everything is 3588 stock and the upgrade still fails. That might be what's holding them back.
bkbrod said:
I'm running two tap x. 9.0.2 with absolutely no problems. Never did have any problems from the beginning of 5.0.0. I'm am ferry close to being a noob, but I just had the instructions up on my laptop and followed them step by step. Will the new version of clockwork work to go back to 3588 if nessacery?
Thanks for all your hard work Roebeet. I barely use my laptop now that I have this tab.
Click to expand...
Click to collapse
No, clockworkmod won't work (even the new one) - if you wanted to backout to old stock (3558, for example), you'd have to use Viewsonic's recovery. Clockworkmod will kill your device, trust me on that. nvflashing to bekit's 1105 also works, that's how I've been backing out to old stock.
Hmmm
In the last 24Hrs, my gTab v.9.02 just decided to go totally nuts. Constant FC's, lockups, lost sound. Tried every fix listed on XDA, wiped /data , re-downloaded apps from Market instead of restoring with TiB; wotked for a little bit, then the same FC's. And random loss of sound.
Going back to 3558 and CWM and 4.2.5.
We'll see what VS throws our way.
Keep up the good work Mr.Roe!!!
roebeet said:
The backout, btw, is the same -- run stock 3588 and it will downlevel you back to the old bootloader. BUT, make sure it's standard recovery and not clockworkmod.
Click to expand...
Click to collapse
Perhaps you should post the method and files in this thread. I know that it's in multiple places, but it never hurts to have them handy in a thread that is this important. Just a thought.
TwoTapsX works great for me so far. Had TNT Lite 5.0.1 but it wouldn't run some apps correctly. Tried all the ROMS and they all had sleep of death problems. TwoTapsX works the best for me without giving any glitches.
TwoTaps .9.2
Thanks Roebeet for all you do here. I am finding this ROM easier to work with than any other. I have noted that periodically it will flash the home screen while I am working. Mostly this has been while in Dolphin Brower HD.
jholmes5 said:
Perhaps you should post the method and files in this thread. I know that it's in multiple places, but it never hurts to have them handy in a thread that is this important. Just a thought.
Click to expand...
Click to collapse
Good point, since the other thread is hidden.
So far I have installed both version and removed them a few time without issue but the last time I removed it...
I needed to re-flash and wipe a few time, it was booting into the launcher but flashing the screen like crazy...
but since the nvflash recovery doesn't erase the root of the device something was making the screen flash black and reload of the desktop repeatedly.
I was able to run root explorer (that survived the nvflash restore) and copied another rom (calkulin) and even there after using his erase tool and running all wipe available from clockwork and calkulin one after the other... (I load clockwork with the part9.img trick) I had to re flash twice until the desktop loaded properly without flashing..
I would like to find a tool that can erase and rebuild the WHOLE tablet...
I have away updated to 3588 thru the online download each time. Anyway I will hold to the current rom for a bit!
P00r said:
So far I have installed both version and removed them a few time without issue but the last time I removed it...
I needed to re-flash and wipe a few time, it was booting into the launcher but flashing the screen like crazy...
but since the nvflash recovery doesn't erase the root of the device something was making the screen flash black and reload of the desktop repeatedly.
I was able to run root explorer (that survived the nvflash restore) and copied another rom (calkulin) and even there after using his erase tool and running all wipe available from clockwork and calkulin one after the other... (I load clockwork with the part9.img trick) I had to re flash twice until the desktop loaded properly without flashing..
I would like to find a tool that can erase and rebuild the WHOLE tablet...
I have away updated to 3588 thru the online download each time. Anyway I will hold to the current rom for a bit!
Click to expand...
Click to collapse
In the dev sub forum there is format utility thread that will completely wipe out all the partitions on the tab.
manikin13 said:
In the dev sub forum there is format utility thread that will completely wipe out all the partitions on the tab.
Click to expand...
Click to collapse
It does not... if you install a custom boot animation it stay there... so it's not full even if after the unit doesn't even start (red text) it's not fully wiped...
I have used clockwork with the partition option, this seem to perform a full format with either the nvflash format or bekit recovery but I am not sure why we can't get this done tru the nvflash...
manikin13 said:
In the dev sub forum there is format utility thread that will completely wipe out all the partitions on the tab.
Click to expand...
Click to collapse
It's in my first post, as well. Run that nvflash first to erase the device, then the bekit 1105 nvflash to complete the process.
What seems to happen is that the old stock / new stock user data setups are not compatible. When going to new stock, it's not so bad because new stock has a better recovery. But when reverting, old stock has a crappy recovery with no user data wipe options. Even Viewsonic understood the limitations which is why they changed their recovery in this UAT of theirs.
I mentioned to jerdog that I wanted to see if I could port their new recovery to old stock (using an old kernel). If that works, we could conceivably offer a "bekit 1105 enhanced" version that adds it. This is better than clockworkmod in that it's the vendor's own recovery and includes the ability to wipe user data, calibrate the device AND update / downlevel the bootloader. For the purposes of getting users backed out if needed, it might be a critical piece of the puzzle.
EDIT: No go. The recovery functionality is actually IN the kernel, my bad. So it can't be ported over. Oh well.
You guys are GODS at this. Simply amazing what you are all doing with this G Tab. So I guess I'm one, of some lucky few, that ACTUALLY READ the install instructions for 5.0 and 5.0.1.
Glad I did because I love the market on this thing.
Eagerly watching what happens with Viewsonic......Any chance they did this as a step to make a Honeycomb upgrade easier? I doubt it since the original G Tab with OTA updates is still crippled.
First off just want to give my thanks to roebeet and the devs here at XDA. I've been running TnT Lite 5.0 / TwoTapsX ??? since the day I bought my Gtablet on 3/11 with no problems. On Friday the 11th I was itching for a Xoom somehow managed to find out Staples had the Viewpad 10 but not in store and somehow managed to end up finding out that Office Depot had the Gtablet for $379.99 in store. I read roebeet's at the time TnT Lite 5.0 thread several times before walking to my nearest Office Depot and brought home a Gtablet within minutes of reading that thread.
Out of the box from 2967 I went to 3588 through stock recovery and not OTA; and then did the same thing to go to TnTLite 5.0.0
I have successfully backed out of TNT Lite 5 in two ways:
1- Re-run a stock ROM. Specifically, I tested 3588. STOCK is important, as the bootloader will be downleveled to the necessary revision.
2- nvflash, using bekit's 1105 image.
In the case of stock, you might get stuck in a boot hang due to the possible need to wipe user data. So, I would recommend running the update.zip off a microSD so you can install clockworkmod .8 (old version) to give you the ability to wipe data.
Once you have old stock back, you'll be able to install older versions of TNT Lite, VEGAn, zPad, etc. as the bootloader is downleveled again.
Click to expand...
Click to collapse
My question to roebeet or anyone who has gone from TnTLite / TwoTapsX back to 3588 using stock recovery. I could swear the above quote from roebeet had an additional line about using stock recovery to run the 3588 stock rom and then wiping user data from stock recovery. From TnTLite 5.0.0 can I go back to 3588 using the stock recovery and wipe user data with the stock recovery after running 3588 but before rebooting?
Android system recovery <3e>
Wipe Data/Factory Reset
Wipe Cache Partition
Click to expand...
Click to collapse
If it is possible to wipe user data after flashing back to 3588 do I need to just wipe data or do I need to use the 'wipe cash partition' as well.
edit: never mind my rambling probably better to wait until we know what Viewsonic is going to do and at that point roebeet will let TTx users know how to proceed from TTx to whatever comes down the pipe from VS
I did have a line (I think in the TwoTaps thread) about reversion and wiping data before you reboot into 3588 stock. But, I tried this once myself and it didn't work.
Maybe I should make a special 3588 "mostly stock" with clockworkmod, as a backout solution (so that, if you get into a bootloop situation post downgrade, you already have clockworkmod installed to fix it - that could work). It's the "wipe data" option, btw.
But first, lets see what the vendor does - if they stick with this new bootloader then TNTL5 / TTx users might already be one step ahead of everyone else - you may not want to backout.
Using it since first release with no problems. I always read the entire first post as well as user issues prior to updating. There are probably many users that try before reading which can lead to issues.
I think this is a great ROM.
Sent from my GTablet-TwoTapsX using Tapatalk
I'm one of the ones who ran into troubles getting this to load and I honestly believed I followed all the instructions when doing so. I've tried mostly all of the custom ROMs and was on the Vegan experimental before loading TTx. Not sure what the problem was but nvflashing with or without recovery didn't take. Kept getting stuck in APX mode. I wasn't really worried since I could always get the tablet to take the nvflash so I just kept playing with it until lo and behold, I was able to enter the TTx recovery mode. Been working fine since. I really like this ROM but I definitely feel like the disclaimer is justified - if you're not into tinkering this isn't something you wanna try.
The only problem I've run into so far is that when I recover my Angry Birds file and run the app it FC's. Runs fine if I just install either version, but when I try to restore my saves by using TB, the app refuses to run. Weird. Other than that, no problems. I don't really like the default browser, but understand that it's required at this point. FLash works fine and I haven't had any issues at all with the market. Even found a few apps that were supposedly only available with XOOM builds.
Many thanks Robeet and hopefully we can get a more "idiotproof" upgrade process.
T
roebeet,
Where can we obtain the bekit 1105 file?
I remember seeing the name somewhere but don't remember seeing the D/L source.
Rev
I originally purchased a GTablet from the original Woot! sale based on reviews during that sale that this was a wonderful tablet once a new rom was installed. The first tablet I purchased as a gift for my wife. I received it on a Friday after I got off work. Within about an hour, I was up and running with TNT Lite, a fully functional app market and Adobe Flash Player.
I primarily followed this guide from these forums. I had zero problems and everything worked flawlessly following the guide.
I was so impressed with the tablet, when it came up on Woot! again, I decided to purchase another one. This tablet arrived quickly, and by all appearances was the same as the tablet for my wife. I checked the stock OS, installed the OTA update and verified I was on 1.1 3588. I proceeded to follow the guide again and ran into problems immediately with the app market.
I used the basic app market fix listed and no matter how many times I did it, I couldn't see the majority of apps. I then began looking around the forums and found this guide for the titanium backup method. I followed this exactly and still the market wouldn't work.
I found one more guide (can't find the link now) that instructed me to edit files on the tablet to known working configurations. I grabbed the files and they already had exactly what the guide was telling me to change to. So no luck there.
I then remembered reading that some Roms had a working app market out of the box. I figured I'd try VEGAn or Cyanogen Rom instead of TNT Lite to see if this fixed this problem. This is when I ran into another brick wall. I was completely unable to load these Roms on my tablet. After performing the install in ClockWork Mod and rebooting, the tablet would get the ViewSonic screen with Birds and never complete the boot. I left it on that screen for as long as an hour and still nothing worked.
I came back to the forums looking for more information. Buried deep in the VEGAn 7.0 thread I found a gem from someone who had a similar boot problem (they made no mention of market problems). This person said they were able to fix the boot problems by using NVFlash to restore the tablet to original settings and pointed towards this thread as a possible fix.
I followed the steps in there directly. I was hung up for about 20 minutes trying to figure out how to use NVFlash and ClockWork mod until it dawned on me that accessing for NVFlash was used with the Volume Minus button instead of the Volume Plus button. So if you are confused in that section, keep in mind they use different power up methods and don't conflict.
After using NVFlash and restoring back to the original settings I was able to get into the stock rom. I tried the OTA update immediately and it failed after the download. Restarting the tablet fixed the problem. After you are able to boot back into the stock rom, I recommend a restart just in case. Then do the OTA 1.1 3588 update.
I then followed the original guide again. This time, everything worked as expected. Using TNTLite and the Market Fix worked the first time. I formatted and installed VEGAn and it worked on the first time too.
I decided to make this post as a thank you to everyone out there who works on these ROMs and everyone who has posted fixes to their problems. Hopefully this will help anyone else that is having problems.
My wife and I absolutely love our tablets and this wouldn't be possible without the fine people here.
TLDR;
Market was broken and known Market Fix didn't work. Used NVFlash and it fixed it.
NVFlash uses Volume Minus not Volume Plus
Restart Stock OS after first boot before installing OTA update
Thanks for posting this. I plan on switching to vegan from tnt lite soon. This is good info to know ahead of time.
Thanks for the info from someone who is waiting to theirs in the mail.