this Boot Animation is Base on the new Mortal Kombat Game....well this is a special case my favorite character from the series " SCORPION " face off Olympus god killer "KRATOS"
using Liberty ToolBox is the easy way to install the animation or any boot animation IF YOU ARE USING LIBERTY ROM...rename the zip file as " bootanimation.zip " as need it
if you are using LIBERTY 1.5 ROM do the follow :
*- copy the animation zip file to your Root SDcard
*- then run "Liberty Toolbox"
*- goto "Liberty Tweaks"
*- goto "Manage Boot Animation"
*- then "Install /sdcard/bootanimation.zip"
Reboot and enjoy the animation ...
using ADB :
1. download files below
2. put the file in your sdk/tools folder
3. rename the file to "bootanimation.zip" if is need it
4. go into adb and push file as follows:
adb push bootanimation.zip /data/local
adb reboot
Reboot your Droid X and Enjoy
Using ROOT EXPLORER to the follow :
1. copy the bootanimation.zip in your SDcard.
2. using Root Explorer copy/Move the bootanimation.zip
3. goto " data "
4. goto " local "
5. copy/move file here. NOTE: if there is another "bootanimation.zip" file here rename it sample = original_animation.zip
6. long press "bootanimation.zip" and click Permissions then select every single checkbox there click OK.
7. press BACK till you're out of Root Explorer.
8. REBOOT and enjoy
you can download this animation from :
Click here to download the file
and you can check the video in action here
http://www.youtube.com/watch?v=RgL-h4zwh00
ENJOY
Related
Can someone direct me to a tutorial on how to change the boot animation either from modifiying the .zip file ROM or just doing it after installing the ROM?
Instructions are available for nearly every phone if you search your device's specific forum. This one is for the (g2 and desire z) basic idea. I'd do some searching in your thread though.
**ROOT Is Required**
For BootAnimations:
The usual notice i am not repsonsible if you brick your device but this is pretty easy to do... follow the instructions below:
1. Follow the link to download.
2. Download and rename the file to bootanimation.zip
3. Put it on your sdcard
4. Open terminal enter these commands: (for Cyanogen and Stock Rom)
su
cp /sdcard/bootanimation.zip /data/local/
For those of you who have it the root explorer.apk also works to install
1. Same as above
2. Same as above
3. Same as above
4. Open Root explorer
5. Select bootanimation.zip from sdcard
6. Select move
7. Find Data folder
8. Find Local folder
9. Paste into Local folder
SENSE Roms Instructions: (Absolute System.apk Needed)
1. Download and install Absolute System.apk
2. Select download bootanimations
3. Press Menu
4. Change Install Location
5. Select EVO4G
6. Download Bootanimation
7. Use a File Manager to move Bootanimation into sdcard/goodies/bootanimations
8. Open Absolute System.apk
9. Select Downloaded Bootanimations
10. Select the Bootanimation you just placed in the file
http://forum.xda-developers.com/showthread.php?t=1139219
Post by shadyx513
Hello CS968/TV01/CR11s owners.
There are too many specific bootanimations for some devices and I think why not for ours?
So...
I've created a few bootanimations for our ugly CS968 :laugh:
I must warn you these animations are HD Quality (1280*720) and very bigger than normal animation files, about 10 mb (most of them).
Note:
There is 2 way to install this animations to your device.
1- Any Bootanimation changer application from market.
Just search "Boot animation" you'll see like this one:
https://play.google.com/store/apps/details?id=bas.com&hl=tr
2- Old fashioned way, for this you need terminal emulator and Root access capable browser, because of the protection your bootanimation.zip file will be replaced with factory one, so there are things to do.
It just happened with me and I achieved this issue while typing a few commands.
I'll explain the How, follow the steps.
Download as much as you want bootanimation.zip files from here.
Copy your prefered animation to a USB drive, or SD card or Network disk, just remember where it is.
Connnect your storage to CS968, now go to applications and select the browser which has root options.
Copy bootanimation.zip file from the storage where you put to
/System/Media folder.
When it asked to replacement then choose YES.
Go to Terminal application...
Type:
Su
cd /system/media
chown root bootanimation.zip
chmod 06755 bootanimation.zip
If above not works then : chmod 0644 bootanimation.zip
reboot
If you see your newest bootanimation then you done it, not then there is something wrong.
So here the thumbnails...
Note : THESE ARE ONLY GIF IMAGES.
Click to expand...
Click to collapse
1 - Andro-Fusion - Download Link...
2- Metalburner... - DownloadLink
3- The Future Device - DownloadLink
4- Strange Scanner - Download Link
5- Core-Bios - Download Link
6- XDA-Dev fanatics : Plasma Fire... - Download Link
7- XDA-Dev Fans : Expanded Regular Fire... - Download Link
Hey Gyzz here is cool boot animation for most of many Mediatek devices this succesfully tested my me.
Requirements
*Rooted phone
*TWRP unlocked
*ES Explorer
*ROM tool box lite (available of playstore)
Downloads:
www drive google com/open?id=0B8aFDxlDTqcvZXBlLVlaYzJUM28
(Replace the spaces between the links with dots and then paste it into the browser)
Procedure
1. Switch off your phone
2. Go to TWRP recovery mode then go to install
3. first you have to install boot animation file and then boot logo zip file
4. reboot your phone you will get the boot animation but not the sound
5. Open es explorer then go to home,system,media
6. There will file as bootanimation of stock sound juzz rename it by adding 1 i.e bootanimation1
7. Paste the sound file and rename it by the stock file name
8. Open rom tool box then root browser then system then media then press and hold the file of WD sound file
9. Goto properties the only tick the option as shown in image i.e is ss while chaing sound file
10. All done juzz restart the phone you will get the sound too
Enjoy, if you get any problem Comment
Required:
1. Devices Rooted
2. Root Explorer
Steps:
1. Please do backup your device before to do this tutorial for just in case system failure.
2. Open Root Explorer if has installed.
3. Find SystemUI.apk file at System -> Priv-app folder.
4. Then copy and paste in the root of Micro SD Card.
5. Click and hold SystemUI.apk then choose to Extract All.
6. Go find SystemUI extracted file folder on SpeedSoftware folder -> Extracted folder.
7. Open SystemUI folder -> Res -> drawable-hdpi.
8. Find this 6 files on Drawable HDPI folder:
stat_sys_gemini_data_connected_4g_orange.png
stat_sys_gemini_data_connected_4g_orange_roam.png
stat_sys_gemini_data_connected_h_plus_orange.png
stat_sys_gemini_data_connected_h_plus_orange_roam.png
stat_sys_gemini_signal_3g_orange.png
stat_sys_gemini_signal_4g_orange.png
9. Copy those 6 files from Drawable HDPI folder then paste on new folder to edit.
10. Please do not confuse it & here's you must to do:
Rename "stat_sys_gemini_data_connected_4g_orange.png" to "stat_sys_gemini_data_connected_h_plus_orange.png" (without ").
Rename "stat_sys_gemini_data_connected_4g_orange_roam.png" to "stat_sys_gemini_data_connected_h_plus_orange_roam.png" (without ").
Rename "stat_sys_gemini_signal_4g_orange.png" to "stat_sys_gemini_signal_3g_orange.png" (without ").
And if it ask to overwrite or replace, just click or choose yes.
11. And if it has done, you just choose and copy only 3 files:
stat_sys_gemini_data_connected_h_plus_orange.png
stat_sys_gemini_data_connected_h_plus_orange_roam.png
stat_sys_gemini_signal_3g_orange.png
12. Paste back to folder SystemUI folder -> Res -> drawable-hdpi on folder that you've been extracted before & please click or choose yes if it ask to overwrite.
13. When everything has done, then click on SystemUI folder & hold to choose Zip this folder.
14. Rename from SystemUI.zip to SystemUI.apk then copy & paste back to System -> Priv-app folder and please click or choose yes if it ask to overwrite or replace notification.
15. Click or choose and hold SystemUI.apk and please edit permission to R-W-R-R or enter Octal to 0644. Click yes if it appear notification "The current file system is read-only, do you want to remount as read-write and continue the operation?" and put it back to read-only mode if it has done.
16. Reboot your device if you has ready for big surprise and some "Forced Close" notification, and please reboot again your device for more stable & please let H+ data network become 4G on your Android device status bar.
(Tested working fine on Acer Liquid E700 Triple SIM - MTK6582 - Android Kitkat 4.4.2 Stock ROM)
PS: Please do it at on your own risk. i'm not responsible if your Android device bootloop or system failure because this modifying.
why i cant find "drawable-hdpi" ???
just "drawable & drawable-hdpi bla bla" ??
Download Invicta OS Bootanimation for Your Device
We all Love Invicta OS bootanimation, Right ?
I have Done Alot Of Hardwork And Made It For All Of US
Please Press The Thank Button And Give me 5 Star Rating it would help me alot
How To Do That
STEP 1 :-
Download The bootanimation.zip File Below :-
If You Have Phone With 1080p Resolution - Download Here
If You Have Phone With 720p Resolution - Download Here
STEP 2 :-
Open File Explorer (Root Supported)
Recommended - MixPlorer - Download
Step 3 :-
Copy the bootanimation.zip File You Downloaded
Goto Root > System > Media
You will Find A bootanimation.zip File there
Rename It to bootanimation.zip.bak
Now, Paste The bootanimation.zip File That You Have Downloaded Now
Select The bootanimation.zip File Go To Properties Set The Permissions AS RWRR - Owner | Group | Others
Read tick tick tick
Write tick
Execute (Blank means Not Ticked)
RESTART YOUR DEVICE
IF You Want Your OLD bootanimation Back
just Delete The New One And Rename The Old bootanimation.zip.bak to bootanimation.zip
:good: PRESS THE THANKS BUTTON IF I HELPED YOU YOU CAN ALSO GIVE ME 5 STAR RATING :good: