Related
Okay so I am about to go insane trying to get this to work. I've got a MyTouch3g which I just flashed cyanogens 5.0.7 this past week and haven't been happier.
However I was trying to get ADB to work on my new laptop, as my desktop machine is out of commission at the moment. I remember how much of a pain it was to get working, but this is getting ridiculous.
I am running Win 7 64bit with all windows updates. I downloaded the Android SDK and followed all the instructions to the T from cyanogen wiki. Except when I plug my phone in, it reports USB device is not recognized and has 'malfunctioned'. I don't even get anything reported under Device Manager except 'Unknown Device'. From here I've tried updating the device via numerous google reports of 64 bit usb drivers to no success. I also tried the Motorola Droid drivers for the 64 bit via a installer and still no success. I even tried the HTC Sync which still, no success.
I tried using USBDeview and removing any HTC and going from those steps as well, there were two HTC devices listed from when it previously worked fine on my 4.2 cyanogens, and again this didn't help the matters.
At this point I am wondering if something is wrong with my phone? I cannot even mount my SDCard anymore.
So I had the dreaded Win 7 x64 crash. I uninstalled IE 9. No go. Used that DLL fix (which I can't remember where I found it). Still crashed. So here's how I got around the problem.
Note:
I'm just sharing what I found since none of the solutions I googled up worked for me (maybe I'm the only one). For those who wonder why anyone would bother with stock Froyo, I'm sure there are reasons. I just wanted to do some testing of the upgrade exactly as it came from Samsung. There's probably an Odin flashable package somewhere which may be bit-for-bit identical, but I didn't bother looking. I'm hoping this will work if another update comes down the pike (Ha!) and Kies is still broken.
Here's what worked for me. It may brick your phone so understand that before you start.
Step 1:
Load up Virtual PC.
In Virtual PC:
Install the Samsung drivers
Install Kies Mini
Install Samsung PC Studio (for Gadget Serial driver)
Step 2 - back to the phone:
Flash stock. I flashed one-click JF6, but use the right stock firmware for your phone (build 1010 and later phones should use something like this)
Step 3:
At this point you may want to make sure the Gadget Serial driver is loaded and working (if you one-click flashed JF6 skip to step 4), so put the phone into download mode and plug it into the PC.
In Virtual PC:
USB Menu->Gadget Serial Attach
Insure that driver is working. If it isn't then the update won't work because Kies Mini will not be able to communicate with the phone after it goes into download mode. If it works then skip to step 5. If not then do step 4.
Step 4:
Have CWM update.zip on you sdcard root directory
Reinstall packages
Reinstall packages again
Install zip from sdcard
Install sbl_CWM_update.zip (attached to this post)
Do the step 3 check. If that fails then the Gadget Serial driver isn't recognizing you phone and this isn't going to work unless you can fix it.
Step 5:
Reboot the phone, turn on USB debugging then plug it in to the PC.
In Virtual PC:
Start Kies Mini
USB->Samsung_Android Attach
Start the upgrade
Wait 12 years or so until the phone goes into download mode
USB->Gadget Serial Attach
The install should continue automatically. If it doesn't there is an upgrade button which should be enabled when driver is loaded and the phone is detected.
Wait for the install to finish, at which point to phone should boot into Froyo.
Done.
thanks
cool, i had tried all of the other ways of forcing kies to recognize my computer... but it always ended with the same crash, nice little white box where the program should be. so im trying this out but its taking forever to get xp virtual machine up and running. i will post again with my final results
ok now for my story
i have had flashed multiple versions of cognition on my phone and have become very familiar with the process. i do love cog 3.04 but the problem is that the swype that is loaded on the rom is a 60 day trial version and it ran out. so i wanted to try out the stock froyo and see what improvents i wanted so i could cook my own rom.
i went and got kies mini on the release date for froyo and it was crashing everytime i used it, giving me this lovely white box on my windows 7 x64 ultimate computer. i tried multiple work arounds and have never thought of virtual machine so thank you for that.
i want and ran my odin one click reflashed to jf6, then decided to see if kies recognized my phone. it imediately was recognized and started to update in the virtual machine.
it is currently downloading to my phone and i will repost again if my phone either becomes soft bricked or if the update goes through
Please help me find the Gadget Serial Driver for My Samsung Vibrant
I've been trying to Update my Samsung Vibrant from version KA2 to version KB5 using Samsung Kies mini to no avail. I am running Windows XP SP3.
I know, this is a developer site but I have a feeling I won't be able to develop at all because I when I try to update to (Official) Froyo (Provided through Kies mini), I get stuck in download mode with the yellow sign forever. Luckily I can restore by taking the battery out and rebooting my phone. This is problem is due to not having a Gadget Serial Driver installed. Now note, I have all the other USB drivers installed properly. They all show up in Device Manager, however the darn Gadget Serial Driver is MIA and Windows only notices that is missing the driver when the phone enters Download Mode. I have searched xda developers for this issue and I have seen a number of posts where other people have had the same issue and maybe a couple of people solved it by installing PC Studio. I have Googled up and down the internet, went to Samsung's website and even spoke to a Samsung Representative for a link to Samsung PC Studio. However all of the links I found were either dead, contained fake software or were just shady.
Samsung's site no longer contains an actual download link to PC Studio or New PC Studio (I don't know the difference). Can someone please help me get this Gadget Serial Driver or the PC Studio software which may solve this driver issue? Please don't point me to any "Samsung USB Drivers For Mobile Phones" links because I've downloaded that driver and it has solved nothing. Thanks in advance and sorry for sounding like a complete n00b.
privetKalla said:
I've been trying to Update my Samsung Vibrant from version KA2 to version KB5 using Samsung Kies mini to no avail. I am running Windows XP SP3.
I know, this is a developer site but I have a feeling I won't be able to develop at all because I when I try to update to (Official) Froyo (Provided through Kies mini), I get stuck in download mode with the yellow sign forever. Luckily I can restore by taking the battery out and rebooting my phone. This is problem is due to not having a Gadget Serial Driver installed. Now note, I have all the other USB drivers installed properly. They all show up in Device Manager, however the darn Gadget Serial Driver is MIA and Windows only notices that is missing the driver when the phone enters Download Mode. I have searched xda developers for this issue and I have seen a number of posts where other people have had the same issue and maybe a couple of people solved it by installing PC Studio. I have Googled up and down the internet, went to Samsung's website and even spoke to a Samsung Representative for a link to Samsung PC Studio. However all of the links I found were either dead, contained fake software or were just shady.
Samsung's site no longer contains an actual download link to PC Studio or New PC Studio (I don't know the difference). Can someone please help me get this Gadget Serial Driver or the PC Studio software which may solve this driver issue? Please don't point me to any "Samsung USB Drivers For Mobile Phones" links because I've downloaded that driver and it has solved nothing. Thanks in advance and sorry for sounding like a complete n00b.
Click to expand...
Click to collapse
This is for the flight II but the software has the PC Studio download. Good Luck!
http://www.samsung.com/us/support/downloads/SGH-A927ZAAATT
privetKalla said:
I've been trying to Update my Samsung Vibrant from version KA2 to version KB5 using Samsung Kies mini to no avail. I am running Windows XP SP3.
I know, this is a developer site but I have a feeling I won't be able to develop at all because I when I try to update to (Official) Froyo (Provided through Kies mini), I get stuck in download mode with the yellow sign forever.
Click to expand...
Click to collapse
Thanks man. That made my day. I needed that.
You can also get the Heimdall suite and open the drivers folder and run Zandig. Then connect your phone in download mode it should show gadget serial in the device window click install and it should complete and you're good to go, this is how I did it after 3 days trying to get my phone to stop showing the device malfunction error which is due to another problem on my main xp machine, a sony which I can't get usb 2.0 drivers for from sony or anywhere else to work correctly even though all 8 ports are 2.0 according to support, my manual, and previous xp install and that's after installing xp 4 times to get the graphics driver to install right so I could then install the right ati driver which everyone online with this model sony seems to have to do, but back on topic. I hopped on my windows server 2k3 machine which had correctly working usb 2.0 drivers ran zandig with my cappy in dl mode and BAM finally working gadget serial driver, just make sure you have zandig.exe open, and connect your phone in DL mode or you'll just install the equivalent of the standard samsung drivers which you prolly already have, I haven't been able to test this on a win7 machine but from what I've read the heimdall driver should work on them and worked great on both xp and server 2k3 on my home server machine.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jsmokey said:
You can also get the Heimdall suite and open the drivers folder and run Zandig. Then connect your phone in download mode it should show gadget serial in the device window click install and it should complete and you're good to go, this is how I did it after 3 days trying to get my phone to stop showing the device malfunction error which is due to another problem on my main xp machine, a sony which I can't get usb 2.0 drivers for from sony or anywhere else to work correctly even though all 8 ports are 2.0 according to support, my manual, and previous xp install and that's after installing xp 4 times to get the graphics driver to install right so I could then install the right ati driver which everyone online with this model sony seems to have to do, but back on topic. I hopped on my windows server 2k3 machine which had correctly working usb 2.0 drivers ran zandig with my cappy in dl mode and BAM finally working gadget serial driver, just make sure you have zandig.exe open, and connect your phone in DL mode or you'll just install the equivalent of the standard samsung drivers which you prolly already have, I haven't been able to test this on a win7 machine but from what I've read the heimdall driver should work on them and worked great on both xp and server 2k3 on my home server machine.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Best first post I've seen in quite some time. Thanks for that.
boborone said:
Best first post I've seen in quite some time. Thanks for that.
Click to expand...
Click to collapse
Thanks I appreciate that I just wanna give back as much as I've received from the forums here its a great place to start. If anyone runs into any problem with this let me know and I'll see if I can reproduce and come up with something.
Sent from my SAMSUNG-SGH-I897 using XDA App
(I posted this in the guide to installing s-off etc etc but yeah I don't know if anyone's going to pay it any mind there :S If I was wrong to create this, I'm sorry ><)
Hi,
I keep getting a Communication interrupted error. I don't know if anyone else had this problem and can help me? I'm a n00b with this s-off thing and I triple checked with like 4 different websites to make sure I'm going the right way with this.
Doing this on Windows, I got the HTC driver, removed anything that would sync the phone to the computer, everything going well up until this point:
Zerging Root... this may take a minute or so..
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
Whien life gives you lemons, don't make lemonade. Make life take back the lemons
Waiting for fastboot...
Rebooting to fastboot (again)...
Communications with phone unexpectedly interrupted. Try Again.
Press (almost) any key to exit.
What's wrong with it?
also:
I put on the USB Debugging, I turned off Fastboot, and yes, I checked - it is still S-ON *sad*
HTC Sensation 4G (pyramid-1.17.0008, Android: 2.3.3, ROM version: 1.29.531.2)
I have tried with the fastboot on as well
As for these troubleshooting methods, I've been through it over and over:
Revolutionary Hanging on "Method 3"
1. Make sure you have installed all the drivers from above.
2. Please Make Sure you have HTC Sync uninstalled and Droid Explorer uninstalled.
3. Install These Drivers HERE:
4. Basically anything and everything that will allow your phone or other phones to automatically connect or sync to your computer has to be uninstalled
5. Try another Computer or Factory Reset your device as a last resort.
I've tried 3 different computers (I have no access to anyone who has a Linux computer) I've factory resetted my phone twice + my SD card. I really don't know what else to do
I've tried it in Charge Mode, and HTC sync mode as well.
Can anyone help me? :S
you have to do it in charge mode, make sure fast boot is off, and here is the tricky part, ANY app that could sync with the fone, needs to be uninstalled.
for me Zune kept messing with the install cuz it kept trying to sync...
Also, make sure your HBOOT is compatible with the version of revo you are using
so try this:
1) uninstall itunes (and other apple device software), zune, and any htc software (plus the stock drivers)
2) reboot
3) clean the registry (regclean or something similar)
4) reboot
5) reinstall stock drivers then plug in the phone (charge only) and let the pc detect the hardware.
6) unplug the fone and reboot the pc
7) NOW try to S-OFF, should work, this is the process i had to take
Thanks, i tried everything you told me and it still won't work. I'm running out of ideas. Isn't there another method I could go through so I can just flash a custom rom. Lol...
if its unbranded, you can try the HTC method, but im not a fan of their approach to it...revo is much more user friendly in the long run...
also have you tried disconnecting all usb devices other than the keyboard, mouse and phone? also try doing a battery pull and leave it out for 10-15 seconds, and give it another shot
also, what ver of revo u using? the latest? and whats your hboot?
EDIT nm, saw your hboot etc in your first post long night at work
also, this may be a super stab in the dark, try another cable if you have one, just try to eliminate any possible issue
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
DJW6927 said:
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
Click to expand...
Click to collapse
yeah, apparently win7 is giving different users this problem, i used WinXP SP2 32bit with no issues
Yup. Definitely related to Win7 64 bit version for me. Although the user didn't report what version they were using.
It's also worth remembering that all USB ports aren't all the same.
I have to use the ports on the front of this particular 32 bit XP workstation for some operations and the ports on the back for other. Magldr for my HD2 never works on the front.....
Like Rev say in their FAQ... there's something about the USB stack on windows that sucks. Not surprising really when we're talking about interop between such dissimilar operating systems (Android vs MS Win). Its gonna be a headache sometimes.
I'm on Win 7 32 bit, when I tested Revolutionary my device wasn't detected at all.
Rebooted many times, installed drivers and did lots of things and still nothing.
I changed USB port, and it worked xD
Try different USB ports and another USB Cable in-case
Gd luck
Edit: Just found out that you tried 3 different computers... Sorry then, if I come up with anything I'll tell you
Edit 2: Can't he try it on Safe Mode? Maybe it would help?
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Solidus_n313 said:
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Click to expand...
Click to collapse
Wow
Way to go Microsoft xD
I'm having the exact same problem as with the poster of this thread. I've tried a fresh install of xp sp3 via vmware on my macbook pro. I've also installed Ubuntu but can't even get the revolutionary.exe file to open. Linux is too foreign for me, can anyone help me with that?
I had to use HTC sync mode in order for it to work on Windows 7 64 bit.
Sent from my HTC Sensation 4G using Tapatalk
Run it 3 times, each step completes as normal and it'll say it's done
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Sent from my HTC Sensation Z710e using XDA Premium App
lalitsehgal21 said:
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Click to expand...
Click to collapse
listen to this, his situation was WAYYYYY worst than yours, and he got his fone working perfectly and S-OFF'd
By flashing, I assume you do mean using the revolutionary program? I will try this process a little later and will post results. Thank you
i also had this problem when i wanted to set my sensa s-off. i run the tool several times and i always got this error message. So then i plugged of the phone, plugged it on again and then the tool says my phone is already s-off.
i boot the phone into bootloader and yes, the phone was s-off, on top is the revolutionary text and the bootloader version is 1.17.1111
Just got a HTC One SV this afternoon for the missus. (I am a Note 2 owner) and part of the deal to get her away from wanting an iPhone 5 was to convince her Android was the way to go. Of all the phones she looked at, she chose the HTC One SV because of its size ...
Brought it home with the promise I would set it up like my phone for her and all would be good.
Proceeded to follow instructions found in the HTC One SV section of these forums on unlocking the bootloader and so forth.
What a complete and utter nightmare HTC put their customers through for a simple unlock! Went to their site, followed the instructions, joined, emailed, got my "token" <-- what a joke! and proceeded with the next set of instructions which was to place a TWRP img on the phone.
Next thing I know windows pops up and says Device driver was not successfully installed. ? MTP USB Device ...
This I dont get at all. When I first plugged the phone into the PC the forst thing Windows did was install the drivers. The phone popped up in windows and I could access the internal storage.
I've installed HTC Driver & SyncManager but still whenever the phone is plugged in I get the MTP error and no phone in windows. So how am I to finish setting up this phone now?
The only reason for this post is I am exhausted, I've been searching these forums and the net for an answer, and I'm completely at my wits end.
I have an unlocked HTC One SV which may as well be bricked if I can't access it via PC. Maybe I should of let her have that damn iPhone 5 after all ...
Massive props to Seanie280672 who helped me get a recovery.img onto the phone. Phew!
Missus won't be giving me any grief over not getting an iPhone 5
That said, even though I managed to somehow connect the phone to the PC, it is still not coming up in windows explorer, and upon connection of the phone (USB) to the PC, windows always throws up the message that the drivers are not installed?
Check device manager and there's the dreaded little yellow astrix next to the mobile device. Somethings amiss here ...
Thx for the help, muchly appreciated. :good:
Since JB all HTC devices are recognized on PC as MTP device. Previous used UMS was kicked out.
Install the latest version of htc driver
I'm in Australia so I got the drivers from HTC.au site:
http://www.htc.com/au/support/news.aspx?p_id=537&p_name=htc-one-sv
The driver file is called setup_2.1.55.0_htc
Is this the latest or is there a different driver I should be using?
Burginthorn said:
I'm in Australia so I got the drivers from HTC.au site:
http://www.htc.com/au/support/news.aspx?p_id=537&p_name=htc-one-sv
The driver file is called setup_2.1.55.0_htc
Is this the latest or is there a different driver I should be using?
Click to expand...
Click to collapse
have u tried to enable usb debugging? Go to settings > developer options
If your driver is including HTC Sync, you should be fine.
You can uninstall Sync afterwards, driver for the phone will still remain.
Strangely deleting Sync did the trick. Plug in the phone and no pop ups saying drivers are not installed. Phone is now showing up in My Computer.
Yup, not the first time, Sync makes the problem.
Hi all,
I am have bricked my device, its in fastboot mode but wont do anything anymore.
Ive tried literally everything possible, ive read numerous manuals, seen tons of video tutorials but nothing works.
The main issue I am facing now is that MSMDownloader tool does not recognize my phone because of an Driver issue.
However, whatever I am doing I cant get the correct driver to function on my Windows 10 machine.
Whatever I do, it either does not recognize the device, or shows it as Kedacom USB Device / Android Bootloader Interface.
I have manually removed the drivers from the device manager as well as removing them manually with pnputils, it does remove the driver and then shows it as Android Device.
If i then scan the folders (whole windows is in testing mode like many manuals tell me to) it just wont install the driver and if i do that manually using pnputils it changes nothing.
The only moment it changes is when I connect to the internet and search for a driver and the old samer driver will be installed.
I have tried the OnePlus driver installer, I have tried the All In One tool, I tried the Qualcomm QDLoader HS USB Driver, I tried it totally disconnected, i rechecked if i was running cmd and the msmdownload tool as administrator, i have rebooted and updated my pc, rebooted and tried again.
I am pretty sure its an driver issue, but apparently whatever I do i cant seem to be able to fix it, and another way of fixing this phone is probably not gonna work as whatever I do with the volume, power buttons, how many times i reboot i just keep getting the same Fastboot/Download screen.
Does anyone have any other idea, am i missing something? I really have no idea. I have followed several manuals step by step, googled and found people with similar issues tried those solutions, i am now busy for like over 12 hours and am really getting the idea that i cant fix it
This can be closed, I have used the info from this thread:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It helped me revive my phone without having to deal with the USB issues and MSMDownloader.
schorrie said:
This can be closed, I have used the info from this thread:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
It helped me revive my phone without having to deal with the USB issues and MSMDownloader.
Click to expand...
Click to collapse
THREAD CLOSED on request of OP!