Hello everybody, my touch screen didn't respond anymore, so i did an hard reset. Now, i'm stuck on the screen calibration tool, and i can't go on beacause is impossible to calibrate the screen.
What could i do?
Thanks
Have you attempted to flash it yet? Also, what do you mean that the touch screen is gone? Did you remove it, is it cracked etc... Any idea as to what is currently flashed, as in ROM? Supposedly there is a way to by-pass the calibration screen on initial start but I've never had a reason NOT to do it.
Related
I'm using Energy ROM with Manila 2.1 on my HTC Touch diamond. I have been having screen calibration issues since quite some time now. The phone works perfectly whenever I flash it with any ROM. But after a few days, if I tap at any point on the screen, the phone registers a touch on some other point. This problem persists until I run the screen calibration tool.
But at times, the touch response becomes so bad that it is not possible to click on start and then go to settings>system>screen.
So I have to reflash my ROM in these cases. I figured out that a lot of trouble can be saved if I can manage to have the screen calibration on startup. So whenever the touch response becomes bad, I can try and access the screen calibration tool from start>settings... But if I'm unable to do so, I have to simply restart my phone (as the screen calibration tool would run on startup)
For this purpose, can someone please tell me how do I create a shortcut to Screen Calibration in startup?
Thanx.
bump
Someone please help.
Put a shortcut to welcome.exe in your startup folder. And stop re-flashing-I read about people doing that all the time. It's a complete waste. Just do a hard reset.
Farmer Ted said:
Put a shortcut to welcome.exe in your startup folder. And stop re-flashing-I read about people doing that all the time. It's a complete waste. Just do a hard reset.
Click to expand...
Click to collapse
Perfect. Thanx a lot.
Hi,
I've flashed my phone (HTC Touch Pro) with Hardspl and then the latest Energy ROM.
Everything went perfectly and I was impressesd with how simple and easy it was and how much difference the ROM made to the phone.
Today, while using the camera, the screen went blank.
I tryed turning the phone off, pulling battery and a hard reset but its still the same.
Even after hard reset, the screen is blank but if i press the power button, on the second press, I get a flash of whats on the screen and then it goes blank again.
Should I try to reflash the phone again?
I've searched but not found the same issue
Thanks
The touch screen is still working and sometimes i can see the display, but its very dark and hard to read. Is the flex cable that needs changing?
Why would it stop working so suddenly?
Should i take it apart to reseat it?
Ok, I've found the same issue in a few other peoples phones but they seem to have beeen resolved by sendin the phone back under warantee.
I dont have that option unfortunatly so need to find a fix.
The only thing wrong with the phone is the screen backlight that suddenly failed
Can anyone help me or point me in the right direction please? I cant find a definite diagnosis anywhere
New Flex cable?
New Screen?
Pray?
Thanks
Back to stock SPL and stock ROM
Still no luck
Hello guys,
I got in trouble with my Polaris. I'm more then 1 year running ROM from Salvy (megan3)
Today my touch screen stopped reacting and unfortunatelly I'm in a lock mode, so to unlock my device I have to slide the button (that is impossible becouse of the not-reacting touch screen).
I tryed soft reset several times, did not help.
Calibrating the displaycould help to get my screen working, but how should I get to this if I'm not able to unlock the screen?
I'm afraid to do a hard reset becouse I'm not sure if the touch function of the screen will work (to calibrate the display) - i could get stuck on the calibrate display step of hard resetting.
So any advice how to get my polaris work?
Thank you for comments.
This issue make absolutely no sense to me, and only started yesterday.
First, I am stock, unrooted, no mods, no crazy sideloaded apps, just a good old Nexus 5.
When I go to wake the phone, I have noticed that the lock screen is 100% unresponsive. I cannot enter a pattern lock. I then switched to a PIN lock, thinking maybe there was an issue with the pattern. Again, unresponsive screen. So I took my screen lock off completely, thinking there is maybe an issue with the lock screen in general. Again, even with no lock screen, I cannot swipe screens, open apps, nothing. This also includes the soft keys at the bottom.
I decide to factory reset my phone. I update only my Google apps, and again notice the same issue. The screen is totally unresponsive, but then 2 white lines will flash at the top, and the screen will work.
Once those white lines flash, the screen is completely responsive like normal, there are no other issues until the phone goes to sleep again. Sometimes the little lines flash 2 seconds after waking up, sometimes 30 seconds, sometimes I have to hard reset the phone.
I also am linking to a YouTube video that I recorded of the issue in case I am not making sense.
So can anyone explain this to me? What could cause this issue on a phone that has never been rooted or flashed or anything?
Thanks in advance for the help!
https://www.youtube.com/watch?v=2r3U9MhZuG0&feature=em-upload_owner
Weird. Issue. Maybe you should stick everything from your sd to your pc.
And flash a factory image from fresh install from here - https://developers.google.com/android/nexus/images - if you're lucky the drivers maybe corrupt and not the hardware
Sent from my Android 5.0 Nexus 5
Could also be a loose connection. Maybe the flex cable to from your screen wiggled its way out a bit. I've never seen that before on any phone. I'd back everything up and flash a factory image. If the issue persists, contact Google and see if you can RMA the device.
Hello All,
Basically what happened is this:
I got phone D6603 with "Vodafone protect" lock on and owner gave me a possible code for phone. I replaced screen and then found that lock requires only numeric pin, not what I was given. So, he then reset pin and deactivated lock, but I still had it on no matter what. So, I tried to flash new firmware into it for same phone and got it done, but now phone screen stays black all the time with only backlight on. Phone seemingly loads something (probably the new phone welcome screen after flash), which I cannot see, but when connected to computer from fastboot or something then all system files are visible.
When I boot phone from off position, it boots to a point where I can use side button to switch on and off the screen but touch does not respond because nowhere it reacts to touch or maybe I do not know where and what to click on screen.
What could be the likely solution? I do not think that phone is bricked, but something is wrong with system as it does not light up the screen properly. I tired flashing 2 times successfully with same result.
Any advice would e appreciated.
Hi, can this thread be deleted because I am getting phone swapped and thread no longer relevant? Thanks.