hi, first sorry for my english, I speak spanish as my native Language.
I try to install TNT 5.0.0 on my gtablet (i have instaled TNT 4.2.0) and now i canĀ“t turn on my viewsonic gtablet.
if I press ON and volumen + then show the massege:
DETECT A RECOVERY KEY PRESSED
BOOTING RECOVERYKERNEL IMAGE
and stop there.
I have left with this message for 2 hours and steal the same black screen with same messege.
PLEASE HELP !!!
thank you.
similar problem
When I press ON and volume + then I get the message:
DETECT A RECOVERY KEY PRESSED
Magic Value Mismatch
I am stuck!
Related
Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!
Hi guys,
first, sorry for my not the best english, Im guy from slovakia... I have problem with getting into recovery on my Gigabyte Gsmart 1305 / Orange Boston / Gigabyte Cod Fish.. ... i press end call button + volume up + power button. my phone switch on there are orange squares and up in left side of display is written " enter recovery mode " and here the phone freezes (if it help i can post photo).... And i can not get into recovery and install a new ROM.. I would like instal to my phone this ROM - Swedish Snow RLS7... because now I have cyanogen mod 7 and do not work WiFi, my friend has Swedish Snow RLS7 and he is satisfied... Please tell me what can I do, because I was google-ing for a week and I cannot find the answer.
Thanks a lot!!!
English is not my native language, bear with me.
Hello, I need help regarding with this Lenovo A536. Whenever I turn it on, it boots up however up to the "animated logo" and it keeps on looping there forever. I tried googling and found out you can hard reset this phone through recovery mode as what you called it. Pressed volume up + power button, behold I went to recovery mode but it was in chinese... found a translation of that and hard resetted the phone.
But the problem still persist. Any help/thoughts will be greatly appreciated.
You should hold "power button" and both "volume buttons" simultaneously to go to recovery mode
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Miticohtc said:
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Click to expand...
Click to collapse
Anyone can help me?
Guys guys Science may have found a solution right now ... will luckily I do not know, however, acts, then taken by anxiety, I did a downgrade of the OS taking it to the first version available from asus website:
https://www.asus.com/it/Phone/ZenFon...Desk_Download/ and download the oldest! that is, the first at the bottom, downloaded the zip file, and insert it in SD, reboot the phone in boot pressed power button and volume +, with selected RECOVERYMOD down key and select it with the power button, go into recovery and select update from SD car, flashed the firmware previously downloaded and placed in SD at the end you do the second wipe data factory and wipe cache, and reboot, there will dawn upgrade the touch, but the startup screen with the set of languages, now do not do anything and restart again, now it appears the annoying firmware upgrade again always with 0% but the screen "press and hold the power button ... etc .." do it and you will see that it will restart the cell, proceed quietly with the set of the options and creating acount, now every time you turn it on or ravviate, will win for a second the annoying pop-ups but the cell will reboot again and will turn on normally, it is not the best solutions but at least you can use your device, I hope I was helpful and let me know
PS SORRY FOR MY BAD ENGLISH
FIX FILE
HI guy this is a solution, download it,insert in SD card,and flash via recovery
https://www.dropbox.com/s/yyfuxude558rbpj/UL-ASUS_Z00D-WW-12.16.4.3-user.zip?dl=0
Hello everybody ! I have a biiiiig problem with my MT7 (L09)... I can't start the device.
Sorry but I'm french and my english is very poor, I'll hope everybody will understand my problem...
So, I tried to root and install the CWM recovery but i think something was wrong. The phone is rooted but I can't install the CWM recovery. I tried with any tutoials but when I flash the img file, the phone restart in bootloop. After a few moment, I don't know I did that but I take off the phone. But, now, I have a big problem... It don't restart.
When I press quickly the power button (1 sec), nothing happen, I have to press the power button during 10s to feel a vibration. Next, after 2-3s after the vibration, the logo Huawei appear but disappear after 2-3s and the screen turn off with a little vibration.
I tried each posibilities with the power button, the volume keys but nothing works to start or enter in a rescue mode or the bootloader. Nothing...
I don't know what can I do. Somebody have a solution ? Thaks all and sorry for my english...