[Q] Partition problem - General Questions and Answers

Hey, I keep trying to extend my U20i memory following this guide http://forum.xda-developers.com/showthread.php?t=804574 ..and keep failing
I made it through once, but for some reason it didn't move the apps onto my sd card - maybe cause I haven't flashed my ROM before..
But as I try it again now, with my ROM freshly flashed, SD card freshly divided(http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning), every time I try the command adb shell, it gives me an error Device not found. (card unmounted..)
Could anyone help me? Thanks
PS: Since I don't see a way of searching through this forum, I created a new thread.

Related

[Q] Help fixing soft brick

My t-mobile one s has no os right now. I'm unable to run ruu because my hboot version is 1.14.004, I followed the instructions on how to mount the sd card but it still gave me the same error, I'm going to try to mount the sd card again right now but if that doesnt work then I'm all out of ideas. Any help would be appreciated.
Here is where im at now. The sticky didnt help me access my sdcard so im trying to adb push a rom onto my sdcard but it keeps giving me the eror that more than one device is attached, "adb devices" gives me the same 2 serial numbers but one is offline and the other is in recovery. If anyone can help me please do.
I fixed my previous issue, I'm still unable to push files onto the sdcard, im getting the cannot stat update.zip no such file or directory. I've completely run out of ideas can anyone please help me.

[Q] Help please

OK here is my dilemma I have tried every method for transferring apps to SD and none of them work. I have tried partitioning SD w/Odin and cwm
'I have tried directory bind but when I get to the point to select file I can't find it in directory bind - I have tried the titanium backup method in there help section,tried the ROM manager, tried link to SD and apps of that such,I tried flashing a mod that was sup post to trick my tab into thinking my extsd was my intsd e folder manager and script manager,I have been sorting thru hundreds of forums for about 2 weeks now with no success even following directions to a t or I get to a point they r and its different on mine than theirs. I have even tried 3 different ROMs. I'm kind of a noob at this so I must be doing something wrong. I don't know where else to turn for insufficient storage space andapps to SD fix lucky patch works but only for a short time. I have a galaxy tab 2 7.0 3113 w/32gb micro SD and am running chili mango ROM. Please help thank you in advance.

[Q] Phone broken or still hope?

Hello everydody, I am experiencing some difficulties with my Samsung, model GT-I9003-phone which "dropped off a lorry" somewhere next to my relatives somewhere in Asia. When I goth the device, it was in a non-working condition, except a boot-loop and the download-mode. Back then, I had the package of the phone where the exact version ( I don't know if this is what is called "Baseband" or at least is called baseband at my wife's GT-I5003) was specified. So, back then, I was able to find the exact ROM for the device. Unfortunately, the box with the version number now is - somewhere.
After flashing a stock-rom, I managed to enter recovery-mode where I read something about the internal memory being corrupt. As far as I can recall, I then mounted the external SD-Card and somehow managed to reboot the system back to almost normal operation. Even reboots appeared to work normal, besides the fact I had no memory access, neither to internal nor to external sd. In addition, GPS malfunctioned, too.
Unfortunately, even this state didn't last for long time. After several weeks of now-and-then-use, the system just broke down again into a boot-loop. After some time of flashing a variety of stock roms, I managed to flash clockworkmod recovery which works perfectly well. Unfortunately, I didn't manage to root the phone before it "collapsed" again. Besides the possibility, I'd guess this could be a resaon for CWM being unable to flash a custom rom? Otherwise, I'd just test my way through the varieties of versions .
Basically, I do have two questions: 1. is there a possibility to find out if internal memory has failed - and if yes: How?
2. Is it possible to install any version of CM on that phone in the condition it is in?
Thanks a lot in advance for any answers
Hello everybody, I finally found the box . It reads GT-I9003MKDTHL. Is my assumption right that there are no such things as basebands in the GT-I9003 any more and I should be able to flash pretty much any firmware? Furthermore, today I tried to format what is specified as "sd-card ext" in CWM fir GT-I9003 and it gives me an error-message. When I flash "sd-card", my external sd-card gets formatted. So, I'd presume the internal sd is just fried. I read about a workaround for GT-I 9000, where someone installed Androd on a partitioned external SD. Is there somebody who knows someboy having heard about somthing similar working with the GT-I9903?
One step forward...
Hello everybody, I finally managed to get some light into my issues as I once again figured out how to get a software installed and running . It's this one:
http://forum.xda-developers.com/showthread.php?t=2329200
Thanks a lot to the guy who just posted it somewhere where id could do good...
By the way, I figured out that this software actually includes the Baseband.
As in this version, the original recovery system is running and giving me an error message when I start it without external SD-card, I am now quite sure that the internal memory has just failed as this error message was specified in another posting of someone who had a similar issue with a GT-I9000.
The biiiig "Outch" is, that I am unable to install any CWM Recovery System with that Baseband..This results in me not being able to upgrade the software to ICS, where - as far as I read some troubleshoot-information - will enable me to mount an additional partition on my SD-Card as Data-Partition which isn't possible yet (i.e.: I can't access my SD for storing data or whatever - it's just specified as "not there").
I tried to install the XXKPE-Baseband to be able to go for KPQ which would enable me to install CWM Recovery. I also installed Bagarias CWM-normalboot-image via Heimdall - but I was unable both to boot the OS and to find any trace of a zip-file on the SD-card.
Edit: I managed to install the right CWM - it's mentioned in the post where I've got the firmware from... now, I only have to figure out how to deal with the fact that "officially" there is no SD-card inserted - or, better, that this SD-card is now flagged as "internal SD" - and how that machine can find the zip-file on it
Thanks for every bit of help with that issue
Try Aroma File Manager with Terminal
For SDCard issue you could probably switch them in vold.fstab in /system/etc
Good Luck !!!
try this- http://forum.xda-developers.com/showthread.php?t=2329200

No SD Card/Insufficient Memory Error

Hi guys, I installed the kitkat 4.4.2 update a few days ago to try it out (the international patched version from here http://forum.xda-developers.com/showthread.php?t=2581548 I installed the file using CWM and also made a back up of my phone.
I then went back to my backup as kitkat was running terrible and I couldn't get in to setting menu plus all the lag.
When I did the restore everything seemed fine but I realise now that I am getting a lot of errors with the file system, I can't take pictures as it says "your internal storage is running out of space, delete some images or other files". If I try and view images on the phone it says "no external storage available" and the other place the error is obvious is when using chrome or any browser it will say "no sd card" and will not allow me to save any files.
I'm unsure whats happened. I'm also getting another error using PDANET the app will connect while the phone is running the OS but when in the bootscreen it simply says "HTC error- 1" which is supposed to be an issue with HTC phones.
If anyone knows anything or can help me get this back to normal please help as i'm completely lost.
Thanks
Ryan
I had the same problem
I had the same problem in exactly the same circumstances, I tried various things and thought I had bricked my G as I had nothing except fastboot and that was a bit flakey
However, the files linked to on this page, http://www.theandroidsoul.com/install-moto-g-uk-generic-firmwarestock-rom/ seem to have brought back my phone and solved the SD problem
R
I had the same problem and I was freaking out as there was no clear solution on the internet.
Then I did some research, and found the cause to be the partitioning of the SD card. It happens either when you format your internal SD card using the recovery or when flashing ROMs that fail to partition SD properly. The solution is not to format the SD again as this didn't work for me but to fasboot the stock firmware which re partitions the SD card in the correct format.
Hopefully this helped! The links to the stock firmware can be found in the android development section.
Sent from my Nexus 7 using xda app-developers app

[Completed] CM11 not visible in recovery

Hello XDA:
Earlier today I successfully flashed my nook color to CM7.2 using TWRP 2.3.0.2 as described in this tutorial http://forum.xda-developers.com/showthread.php?t=1030227.
After that I successfully flashed TWRP 2.8.3.0.
Right now I am trying to flash CM11 with the corresponding g.apps, but the files are not visible in recovery. What can I do? This is my first time rooting/loading roms so any help I can get is much appreciated.
Hi there,
Try to put that files (zips of CM and GApps) on the external SD Card and try again. maybe is something wrong with that recovery and didn't recognize your internal memory.
Also give us more details about your device for better pointing to the right forum.
Thanks
Hi thanks for the reply. I was actually trying to load the files from an external SD the entire time.
I managed the fix the problem luckily. I had an extra SD card on hand so I re-downloaded the files and tried flashing them to the device from the other card. It worked.
Is this a good way to do things in the future? That way I can keep my files intact on the main SD card and use a seperate SD card to flash new ROMs etc. Though I dont know if the file systems on the main SD card will be interchangeable between ROMs.
The device is a Nook Color (encore). I used the link that I posted in the OP to load CM7 and then CM11. The Nook Color community seems rather dead, so I posted here.
Glad to hear that you have done it.
Take care with SD Card no name. You can loose important files like photos or other docs if something goes wrong.
Good luck
Thread closed

Categories

Resources