Was testing out gtab dock ethernet - got 10 MB/sec - G Tablet General

Then it ****in froze..
heres the breakdown..
started a transfer to sdcard2 via cifs via the terminal.. ionice <pid> rt 1 and renice -20 <pid> immediately after.. bam.. 2.8 MB/sec tops..
then launched filexpert and setup a ftp server.. did this while the other transfer was taking place. 10MB/sec..
just finished typing this and noticed that my computer was still showing network xfer activity.. the tablet was completely locked up and the transfer was fluctating from 10 to 0.. as if it were filling up a buffer and then falling on its face. when it finished.. all was fine and dandy.. and no.. I did not give filexpert process any 'niceness' ..
the dual core tablet can't handle all that 100megabit power.. ugh such ****ing fail. Can we apx debian on this thing yet? Android really does poor job of representing linux.
besides my *****ing, one thing you can extract from this is -cifs, although handy, is probably not the best way to go about transfering large files over the network (nor is adb via usb/wifi).. I've seen the best xfer over ftp.. and thats just with filexpert. I suppose I should try filexperts smb plugin, perhaps it is similar to the situation in linux smbclient binary/browser rx > mount.cifs rx
edit: Was able to freeze it up again while 'pulling' files from the tablet via ftp (internal sdcard).. But this time I was able to hit the 100MBit wall. I'll post a pic of the craziness.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this might be a tad big.. if so, I can just remove the image tabs.. size is 1440x1200.. Its self explainatory.. The top image was taken at one of the peaks.. err.. rather spikes.
take note of the current speed on the first one.. heh.. On average this is worse than wifi.. because its faster? strange right?

Took a look at at my kmsg.. it was littered with crashes.. Mostly the cpufreq daemon, but some stuff ip related.. I set the min/max freq to 1k (cat cpuinfo_max_freq > scaling_min_freq).. It still looks very jagged (transfer graph).. but there is no long lock up (with matching 0B/sec speeds).. in fact.. the touchscreen works as I'm TXing a 600MB file to the device.
still somewhat poor performance. but better than wifi..

Related

Back up of call history databank

Dees any body have an idea how to back up and restore the call history databank. (clog database)
asked sktools and got this
on WM5 with current version you can save all PIM data (PIM.vol include clog database). Separate save only clog not posible.
Click to expand...
Click to collapse
Looking for a 2003 solution.
Do you know what else is stored on PIM.vol?
For instance, the 'Speed Dial List'?
My Wizard Runs pretty fast otherwise,
I dont have any extra Plugins other than SPB pocket Plus or Today Agenda.
When the Outlook is synched (contacts and appointments) I have around 3000 contacts Now.
The PIM file is 7 mb.
After the sync the device slows down a Lot.
Also there are two startup programs (system)
1 FILESYS.exe Takes around 1.8 MB at startup
2. GWES.exe . 1.28 MB(STARTUP)
As the device is used their size increases to ( 2-2.5 MB )this slows the device further.
Pls see pics attached <before and after>
using Oxios or any other memory closing app does not sort the problem out.
ONLY Rebooting sorts the problem.
Secondly, Is there any way I can shift my PIM.vol to the storage card?
coz I have noticed that when the Device memory is sufficient it also allocates sufficient Running memory to the Programs. I feel at least 20 Mb should be there.
Or is there any Program which allows to MANUALLY ALLOCATE memory to <STORAGE> and <PROGRAMS>
Like in My O2 XDA..In wizard the slider does not move...
MY MAIN PURPOSE IS TO LEAVE MAXIMUM SPACE EMPTY on My C drive.(device)
thanx in advance.....
Regards,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
______________________
GURJEET SINGH BAGGA
Microsoft Certified Proff.
[XDA2,O2MiniS,P900i,]
Say NO 2 Pirated S'Ware,Illegal Cracks
A BIG :"NO" TO WAREZ
Regardless of what others Preach & Practise.
Believe in urself And Just DO the Right Thing.

What is it? what can I do with it?

I bought a new phone/pda but can't identify what it is or what its running. it's model no is A858 and is IPTV compatable whatever that means. all the instruction are in Chinese. and there seems to be no way of messing with the software or adding progs as I don't know what it is running on, just says "Windows push technology" Help please.........
is this it? it doesnt run windows, it doenst look like...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
network frequency is "900/1800MHZ" which means its GSM, which means you can use it with everyone pretty much except Verizon but they might not be able to activate it since its a foreign model, but i think you are out of luck here anyway since the developers on this site program for windows mobile (which it doesnt run)
p.s.- IPTV stands for Internet Protocol Television...not sure what the heck that means in terms of your phone though
yes. It comes up with the windows logo & says "Windows push technology" in the startup screen, other than that I have no idea?
well, "push technolgoy", whether its windows or apple or whoever makes it...just means that your phone has the capability of constantly checking for email, messages, etc....it means that you can set it to check for email (if you have a data plan), ever 5, 10, or 15 minutes, etc...if you wish. data is constantly being 'pushed" to and from your phone, that's all it means, so it looks like you have a limited user interface, not windows by any stretch, but still microsoft based technology, while the base rom is probably made by some 3rd party subsidiary of the company that makes the phone.
so not supported by microsoft, but still usable.
Thank you for your prompt reply on this. It is a good phone but limited on it's PDA side, Music wise is excellent as it has an extremely loud MP3 player and plays videos downloaded from the net or from my own camera....It's just a bit annoying that the PDA section is worse than useless... but your help is appreciated

[Q] Why isn't Google Talk working? The application starts, but then closes itself.

My problems are exactly the same as the ones that can be found in this thread.
http://androidforums.com/incredible-support-troubleshooting/85756-gtalk-wont-open.html
The app pops up for a second, i see the icon and the words "signing in..." for about a second, and then it returns me to the home screen.
This is the log got by plugging the phone to my computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The thread seems to suggest a memory problem, but I've got 29MB free. Oh, and I'm running 2.2.
Does anyone have any idea what might be causing this?
davorb said:
My problems are exactly the same as the ones that can be found in this thread.
The app pops up for a second, i see the icon and the words "signing in..." for about a second, and then it returns me to the home screen.
The thread seems to suggest a memory problem, but I've got 29MB free. Oh, and I'm running 2.2.
Does anyone have any idea what might be causing this?
Click to expand...
Click to collapse
Well, I had the same problem, and I suspected memory as well, since I have been getting the low memory error for a few days now.
I uninstalled flash, which takes an enormous amount of space! 12 MB. But I also changed the Gmail policy for syncing. I had few very large folders set to sync 7 days worth, and one of those had a ton of inline images. I actually think that is what was causing the trouble, but I am not certain.
Either way, I freed up enough memory so that GTalk could turn on. I guess that sucker needs space, too! I wish more apps would use the install to SD card option. Especially giant ones, like Yahoo Fantasy Football (another 12MB one).
Oh well, I hope that helps.
P.S. I am on an original Droid running Froyo.
For me was the memory problem. I"ve uninstalled a 20 mb. prg and that solved the problem for me. I also needed to reboot my device after so the temp files will be erased along to. Now i have like 30 - 35 mb. free on the phone memory.

RT still slow wifi speeds

Good evening everyone,
I decided to look into improving speeds over wifi when remoting to my laptop(trying to play Diablo 3 from RT). I recall before February patch Tuesday that there were some issues with wifi, so I assumed that there would be no problems post patches. I decide to run some tests over speedtest.net and I noticed this drastic difference.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Router: Buffalo N300 <-link
Changed network mode(A/B/G/N). Changed channels/Channel width. Only thing I'm running into issues with is upgrading the firmware on the router(talking to buffalo about it now). Im willing to bet that I am missing/overlooking something simple as **** but I cant seem to figure it out.
Any help or direction would be greatly appreciated. Thanks in advance.
Holy ****sack, you've got 10x better download speed than I've ever had! Why does the world hate me...
Also back to the question at hand, I've also had a problem like this, even though the Surface has two network cards it's still slow, slower than other PC's in the house, I just guess this is another problem Microsoft will have to fix.
Dane Reynolds said:
the Surface has two network cards.
Click to expand...
Click to collapse
Its got a single network card with a dual tuner. Not two network cards.
As for the download speed. My home download speed is measured in kilobits per sec, I don't even get half a megabit, let alone 11.
SixSixSevenSeven said:
Its got a single network card with a dual tuner. Not two network cards.
Click to expand...
Click to collapse
Oh sorry, I'm sure I read that somewhere but cheers for giving me clarity. ?
I think you are right with MS needing to optimize a bit.
Another problem I notice is that being in a larger apartment building, there are a TON of networks. I will just have to do some tinkering to see what can be done.
I have to resurrect this thread as this problem, at least for me and a few fellow RT owners, still isn't solved at all. Under 8.0 as well as the 8.1 Preview and the final version the WiFi speed seems to be stuck at a maximum of 65 Mbps.
So far I tried various AP's and different settings: n-only, 2.4/5GHz, encryption disabled, channel width 20/40, etc. but all without success. Also a complete re-install of the Surface RT didnt help as well as the numerous times I have refreshed.

55GB space missing on SDCard after deleting file

I use Syncthing regularly to backup some things from the phone to my PC and it works rather nicely.
Syncthing - Wikipedia
en.wikipedia.org
However, it often chokes on big files, eg I wanted to copy some kiwix files (aka precompiled wiki) to my SDCard (the other way around which works also very well for small files).
Kiwix - Wikipedia
en.wikipedia.org
Welcome to Kiwix Server
library.kiwix.org
Well, that full wiki has some 99GB and it got stuck. So I stopped Syncthing and deleted the remnant incomplete file... took forever, I got impatient and rebooted my fon.
Ouch, no empty space was recovered - I am missing about 55GiB "emptiness". Remembering vaguely that exfat is windows, I thought to just check it quickly in Win10... except it didn't work (check via properties):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone explain this? What would be the proper way to enforce a check and free up my space?
PS: The card is a 512GB from Kingston with read/write above 70MB/s.
AFAIK modern SD-cards support CMD38 ( AKA TRIM ) command.
Check whether the SD-card in question supports CMD38 command and if, then apply it.
More info here:
Quickly Wipe an SD Card with ESP8266
In a previous story, I have written about connecting an SD Card to an ESP8266. During my adventures, I have discovered some interesting…
pawitp.medium.com
jwoegerbauer said:
modern SD-cards support CMD38 ( AKA TRIM ) command
Click to expand...
Click to collapse
Thanks! I would have expected a 512GB card is modern enough but no luck so far:
fstrim: /media/xxx/[email protected]: the discard operation is not supported
So I searched and found two apps:
https://forum.xda-developers.com/t/...ol-of-your-device-nand-chip-trimming.3038240/
https://forum.xda-developers.com/t/...tility-for-android-no-root-necessary.4258765/
Feature set was limited (basically just on and off, cannot select mounts/devices). Tried to set trim at reboot, no luck. Next step was busybox:
~ $ sudo busybox fstrim -v /storage/8549-8438
fstrim: ioctl 0xc0185879 failed: Function not implemented
Yeah, unless there is another idea... I think I just reformat it today (and won't reboot my fon next time so quickly if it occurs again).
PS: When moving all my files from sdcard to pc, something did get triggered and a lost-folder popped up. Unfortunately it was only half of it, instead of 55GB now "only" 34 were missing

Categories

Resources