I was trying to installing the new nightly and I went ahead and formated/wiped everything.
I install CM7 nightly 13 and i get a loop... it would go into the setup after boot and then the CM bootloader would kick in again.
I then tried reinstalling another rom and the same issue.
So then I tred to use unrevoke to get it back to CWR and it got stuck...
I then try flashing the att ruu and it lost comunitaction with the phone...
So now I'm stuck with the damn thing in a loop with no CWR and I dont know what to do...
HAlp
Edit:
I can get into Hboot just fine but its like I have no recovery img at all.
Edit 2:
How to fix!
First you must have android sdk, HTC drivers (without sync) installed and the Rom.zip from the RUU.
Put your phone into fastboot by holding down the trackball and the power button.
Then plug it in and open the sdk.
Move the Rom.zip file to were fastboot.exe is located, in my case it was in my tools folder ( C:\sdk\tools)
After that make your way to the location in windows CMD.
In the command enter fastboot erase cache.
Then fastboot flash rom rom.zip and wait till you its says Finished.
After that pull the battery and turn it on.
It will take awhile to go into Android 2.1 but thats about it.
Rom.zip
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Noz85 said:
I was trying to installing the new nightly and I went ahead and formated/wiped everything.
I install CM7 nightly 13 and i get a loop... it would go into the setup after boot and then the CM bootloader would kick in again.
I then tried reinstalling another rom and the same issue.
So then I tred to use unrevoke to get it back to CWR and it got stuck...
I then try flashing the att ruu and it lost comunitaction with the phone...
So now I'm stuck with the damn thing in a loop with no CWR and I dont know what to do...
HAlp
Edit:
I can get into Hboot just fine but its like I have no recovery img at all.
Click to expand...
Click to collapse
In hboot run the 'install packages, a couple times. That should reload cwr. If that doesn't work:
Try running unrevoked again and see if it will reinstall clockwork.
Sent from my cm7 Aria using XDA App
Noz85 said:
I was trying to installing the new nightly and I went ahead and formated/wiped everything.
I install CM7 nightly 13 and i get a loop... it would go into the setup after boot and then the CM bootloader would kick in again.
I then tried reinstalling another rom and the same issue.
So then I tred to use unrevoke to get it back to CWR and it got stuck...
I then try flashing the att ruu and it lost comunitaction with the phone...
So now I'm stuck with the damn thing in a loop with no CWR and I dont know what to do...
HAlp
Edit:
I can get into Hboot just fine but its like I have no recovery img at all.
Click to expand...
Click to collapse
Put the phone in FASTBOOT and flash the RUU from there.
Shut down the phone completely, then to enter fastboot hold down the trackpad button and press power to start.
Plug in the USB after fastboot is started.
HTC SYNC should be off, with Android USB drivers installed.
Nope not working...
I get a connection error and after I exit the RUU setup I'm back to the damn loop with CM7...
Anyone else got any ideas on how to fix?
sent from my HTC Inspired Desire HD 4G
Did you try to reload unrevoked?
The new and the older version.
The new one doesn't even communication with the phone and the older one trys to push recovery and then the boot loop starts again.
what about the official att rom (the original)
Wont install gets to the point where its going to flash and a communication error kicks it out and hello boot loop
last one ive got (found this googling)
"extract the ROM.zip from the RUU, rename it PB99IMG and stick it on the sd card. Turn phone on whilst holding volume down to get to HBOOT and it'll find the file and reload the ROM"
Edit: I guess it should be renamed LIBEIMG
Fixed thanks to ATTN1.
Noz85 said:
Fixed thanks to ATTN1.
Click to expand...
Click to collapse
My two cents is, if you're going to post that it was fixed, at least explain what you did to get it fixed...that way if anyone else has similar issues and they just so happen to use the beautiful search feature this forum has to offer, they might find this thread and your fix
Seen that before.
Basically he had me force the restore thru fastboot. We took the Rom.zip from the RUU and put it in sdk/tools where the fastboot cmd file is. We then ran the Windows CMD window and went to the location of the tools and begain the fastboot clearing, and pushing the Rom to the phone. I'm sorry I don't remember the commands for the process. If I can find them in my history ill post them.
sent from my HTC Inspired Desire HD 4G
added fix to 1st post
Noz85 said:
How to fix!
First you must have android sdk, HTC drivers (without sync) installed and the Rom.zip from the RUU.
Put your phone into fastboot by holding down the trackball and the power button.
Then plug it in and open the sdk.
Move the Rom.zip file to were fastboot.exe is located, in my case it was in my tools folder ( C:\sdk\tools)
After that make your way to the location in windows CMD.
In the command enter fastboot erase cache.
Then fastboot flash Rom.zip and wait till you its says Finished.
After that pull the battery and turn it on.
It will take awhile to go into Android 2.1 but thats about it.
Rom.zip
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Thanks for the awesome write up.
Issue solved, closing thread
Related
My first post here so go easy on me
Anyway, I got an Evo Shift, I do not know its history, but its stuck in some sort of a boot loop, on the white screen with green HTC logo.
Things I know:
****UNLOCKED****
SPEEDY XE SHIP S-ON
HBOOT -0.99.0001
RADIO - 1.08.01.0111
Clockwork Recovery v5.0.2.0
I did not get an SD card with it, no recovery image.
RUU says version is 2.77.651.3
I know the S-on is a problem.
I have tried all 4 of the RUU versions - failed.
Tried RUU with Gold Card - failed.
Tried rom.zip from each RUU renamed to PG06IMG.zip - failed.
I have tried custom roms of all sorts, every methoud I found - failed.
Where do I go from here? Is there a way of manually flashing all the partitions from a ROM.zip file via fastboot? Is there a way of disabling a version check in RUU? Or is there a way of disabling MD5 sum in Clockwork so I can try flashing a restore image from another Shift?
I have spent 3 days on this phone, and I would hate to admit defeat, so I am reaching out to the genius minds here. Thanks in advance!
Okay, I fixed it. did a write up on how I did it in case someone else fubars their phone.
Things you will need:
Android SDK
HTC Drivers
7-zip
RUU_Speedy_Sprint_WWE_1.17.651.1_Radio_1.07.00.112 9_NV_SPCS_1.52_1103_release_160079_signed.exe
On your computer, search for ROM.ZIP. Include system locations and hidden files.
Delete any instances of it that you may find.
Take the SD card out of the phone.
Put your Shift into fastboot (vol/down + power)
Run the RUU, let it get stuck.
On your computer, run a search for ROM.ZIP while the RUU is running. Its gonna show up in some temp folder.
Copy it to your desktop.
Use 7zip to extract it (for whatever reasons Windows can't extract it).
Open the extracted rom.zip folder.
Copy all files and place them in your SDKs platform tools folder.
Shut down the RUU, reboot the phone into recovery (vol/down + power).
Run CMD and change directories to your platform tools folder.
Type the command "fastboot flash recovery recovery.img" (without the quotes) - this gets rid of any custom recovery like Clockwork, etc.
Reboot the phone into recovery again, you should have a triangle with an ! next to it on black background.
Go back to CMD and your platform tools, and start flashing the following:
fastboot flash boot boot.img
fastboot flash dzdata dzdata.img
fastboot flash partition partition.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Reboot the phone.
After 30 seconds of white HTC screen, your phone should boot up fine and you will be in Android 2.2.
Let me know if it worked out for you, I just fixed mine less than an hour before writing this up.
Also, if anyone out there sees anything redundant, or can help me clean this process up a bit, I welcome your input.
gzetski said:
Okay, I fixed it. Please delete the thread. Unless someone wants me to do a write up on how I did it in case someone else fubars their phone.
Click to expand...
Click to collapse
Did you unlock the bootloader with htcdev tool?
The bootloader was already unlocked when I got the phone.
Thanks for this. I will test it and add it to my guide.
VICODAN said:
Thanks for this. I will test it and add it to my guide.
Click to expand...
Click to collapse
You're welcome... I figured I'd just go hard since it was bricked already.
Speaking of guides though, can I get a bit of clarification on something?
http://forum.xda-developers.com/showthread.php?t=1357157
2.3.4 step 15,
Place misc.img and PG06IMG.zip on sdcard using windows explorer or "adb push /sdcard/file.xxx" via usb
Click to expand...
Click to collapse
Where is the MISC.IMG coming from, and what is ( rom? which one? etc.)in the PG06IMG.zip?
Thanks!
And BTW, I am now rooted, but with S-ON... Grrr. Superuser works, rom manager works, pretty much anything requiring root access works. I have rebooted the thing like 20 times to see if it goes away, and its sticking just fine, but I am afraid of trying to flash a custom rom with the S-ON.
All attempts to flash ENG bootloader fail, both by flashing via fastboot (all my MD5 sums match, the process is flawless from start to finish, when I reboot, still same bootloader with S-ON), or using ShiftRR.
Any ideas?
gzetski said:
You're welcome... I figured I'd just go hard since it was bricked already.
Speaking of guides though, can I get a bit of clarification on something?
http://forum.xda-developers.com/showthread.php?t=1357157
2.3.4 step 15,
Where is the MISC.IMG coming from, and what is ( rom? which one? etc.)in the PG06IMG.zip?
Thanks!
Click to expand...
Click to collapse
shift-rootkit.rar
Read the prereqs.
Okay, got it.
Too many things floating through the intertubes with similar filenames.
gzetski said:
Okay, got it.
Too many things floating through the intertubes with similar filenames.
Click to expand...
Click to collapse
Yep, I've finally got the thread pinned, and I created 2 videos on how to do it the right way. They are uploading to youtube now.
S-off?
Did you ever figure out how to get S-Off? I seem to be right where you were a few days ago with the phone appearing to have root, but S-on still there. I'm also running HBOOT -0.99.0001 and unlocked via the HTC Dev tool. Is there anyway to downgrade to .93 or to turn S-Off. My ultimate goal is to get Cyanogenmod on this Shift.
Thanks in advance!
I have not messed with the phone for a few days. I am gonna try to go back to 2.3.4 then downgrade again. Most likely what I ended up having is a bunch of borked files, hopefully the latest RUU will fix that. This was really intended as a brick fix and not a legitimate 2.2 downgrade. When I mess with it, I will post the results for you though.
Omg thank you! I accidentally bricked one of my evo shifts and spent 3 hours trying to figure out how to fix it. I'm so glad I ran into this thread. Worked like a charm for me.
MTsol said:
Omg thank you! I accidentally bricked one of my evo shifts and spent 3 hours trying to figure out how to fix it. I'm so glad I ran into this thread. Worked like a charm for me.
Click to expand...
Click to collapse
Its not a brick if you can fix it... Bricked phones are permanent paperweights, nothing more, nothing less...
Sent from my PG06100 using Xparent Blue Tapatalk 2
drob311 said:
Its not a brick if you can fix it... Bricked phones are permanent paperweights, nothing more, nothing less...
Sent from my PG06100 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Yes Sir . Been there done that. Had a HERO that somehow got " water damaged " after it was BRICKED .
signature verify fail
gzetski said:
Okay, I fixed it. did a write up on how I did it in case someone else fubars their phone.
Things you will need:
Android SDK
HTC Drivers
7-zip
RUU_Speedy_Sprint_WWE_1.17.651.1_Radio_1.07.00.112 9_NV_SPCS_1.52_1103_release_160079_signed.exe
On your computer, search for ROM.ZIP. Include system locations and hidden files.
Delete any instances of it that you may find.
Take the SD card out of the phone.
Put your Shift into fastboot (vol/down + power)
Run the RUU, let it get stuck.
On your computer, run a search for ROM.ZIP while the RUU is running. Its gonna show up in some temp folder.
Copy it to your desktop.
Use 7zip to extract it (for whatever reasons Windows can't extract it).
Open the extracted rom.zip folder.
Copy all files and place them in your SDKs platform tools folder.
Shut down the RUU, reboot the phone into recovery (vol/down + power).
Run CMD and change directories to your platform tools folder.
Type the command "fastboot flash recovery recovery.img" (without the quotes) - this gets rid of any custom recovery like Clockwork, etc.
Reboot the phone into recovery again, you should have a triangle with an ! next to it on black background.
Go back to CMD and your platform tools, and start flashing the following:
fastboot flash boot boot.img
fastboot flash dzdata dzdata.img
fastboot flash partition partition.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Reboot the phone.
After 30 seconds of white HTC screen, your phone should boot up fine and you will be in Android 2.2.
Let me know if it worked out for you, I just fixed mine less than an hour before writing this up.
Also, if anyone out there sees anything redundant, or can help me clean this process up a bit, I welcome your input.
Click to expand...
Click to collapse
First, I want to thank you for posting this even though it hasn't yet worked for me. I'm in essentially the same position you started in. Phone will not boot past the green-on-white HTC logo. I boot to recovery and can get to fastboot mode with USB detected. I flashed recovery.img and boot.img with no problems, but trying to flash dzdata onwards gives me the same error every time: "(bootloader) signature checking... FAILED (remote: signature verify fail)" and will not flash the other components from ROM.ZIP.
Any thoughts on how to proceed? This thing is rapidly approaching permanent brick status.
You need to unlock your bootloader and then flash the rom. zip files through fastboot
The "failed" message means that your bootloader is locked
to get S-off the easiest method is to downgrade your device from 2.3.4 to 2.2 and then FOLLOW THE SAME INSTRUCTIONS AS OBTAINING S-OFF ON 2.3.4. i had the same issue when i first unlocked my Shift bootloader.
(Method 1)
Ok so you're trying to put this really cool new custom ROM on your phone and then suddenly, your phone won't start up or go to recovery… well my friends, you have got yourself a bricked phone. The thing you worry about the entire time you're rooting, and flashing your phone, has now become reality. Well, fear no more, for I, have found a way to unbrick your device! after bricking my phone and finding different ways how to do it...
Because we are not able to swap or get the sdcard out from the phone, it makes it difficult on how to add a ROM.zip and re-install. Another issue I found is that CWM will not be able to read the sdcard if you do an adb push ROM.zip /sdcard/ROM.zip or by mounting the sdcard adb shell mount /sdcard . If you have this issue will explain later
So let's get started.
Step 1: Turning Off Your Phone and Reboot to Boot-Loader
Because you have a bricked phone, you can't just hold the power button. So if your phone is not already off then you're going to want to turn off by pressing the volume down + power button until the phone shuts off then turn on to boot-loader by pressing volume down and press for 3 seconds the power button. once in boot-loader select fastboot.
Step 2: Adb push to SD card
I assume that you have install CWM, if you don't you can download it from HERE. Once downloaded install CWM fastboot flash recovery CWM.TOUCH.5.8.3.1.img, where your done go back to boot-loader and select recovery. Once in recovery do an adb push of a ROM, in this example I used "Energy ROM" you can get the ROM from HERE. Once you have your ROM rename ROM.zip and push adb push ROM.zip /sdcard/ROM.zip, you will get a message stating the size of the the push.
If you can't do a push because you got an error message will explain later.
Step 3: Wipe The Phone
Make sure to do a Factory Reset / Wipe before installing ROM
Step 4: Reboot back to fastboot
Once you install the room you will need to make sure you have a boot.img for the ROM your using.
adb reboot bootloader
fastboot flash boot Recoveries/boot.img
YOUR DONE
If your the unlucky one's that can't do an adb push to the SD card do the following.
- Reinstall STOCK Recovery fastboot flash recovery recovery.img
- Lock OEM fastboot oem lock
- Unlock OEM fastboot flash unlocktoken Unlock/Unlock_code.bin
- Reinstall CWM Recovery fastboot flash recovery CWM.TOUCH.5.8.3.1.img
That should fix the problem on how to push back to the sdcard
If you have other methods post them below...
Sticky!!
But this won't work if you flash a wrong radio, will it? I thought that if you flashed a wrong radio, you couldn't get anything done, even not booting into bootloader, because it boots the radio first?
I'll second that this method works. Did for me and is easy to do once you take your time. Also make sure you have all the right files and you make sure to type everything word for word in ADB..
This tutorial already exists as a sticky in the Q&A section:
http://forum.xda-developers.com/showthread.php?t=1630459
Sent from my HTC VLE_U using Tapatalk 2
Nice writeup.
For every new Phone I own, the first thing I do after flashing a Custom Recovery is Making a Nandroid Backup of the stock Rom. If something goes wrong after flashing a bad rom I just restore to Stock rom.
A real life Saver for me.
snwman said:
I'll second that this method works. Did for me and is easy to do once you take your time. Also make sure you have all the right files and you make sure to type everything word for word in ADB..
Click to expand...
Click to collapse
It worked for me when I bricked my phone and had to find ways how to be able to load a ROM back to the SDcard and reflash it...
This is a combo of a tutorial cannondale wrote and one I wrote myself.
His is stickied in Q&A section, mine is in Android Dev section...
Not sure why this is here lol.
i get the error 155 when trying to install the RUU
420haxr said:
i get the error 155 when trying to install the RUU
Click to expand...
Click to collapse
Try to relock your bootloader first.
In fastboot:
fastboot oem lock
Sent from my HTC One S
Issue
Ok, still running into an issue. No errors when I push, I locked, unlocked, tried everything again. Reset everything, installed fresh CWM, tried it all over...
What's happening is that it's saying it pushed the file over, but I can't find it anywhere after it's done. This happened the first time I installed custom...I just can't remember what I did to get it to work...
Anyone has the link of stock recovery for HTC One S z560e(ville c2)?? i get error 155 when i try to install with RUU.
After i flash the cwm touch recovery I cant boot into recovery... my phone is stuck on the HTC boot logo with the red text underneath. Is it a problem with recovery or should i try install an RUU. My phone is HTC One S villec2 (S3).
Hi,
I have a rooted nexus 5 on stock android 4.4.2, after installing a boot animation my phone now hangs part way through the animation and so is unusable.
Its taken me ages but I am now this far:
Code:
* Boot into Recovery on phone
* You will see an Android with a red triangle and "no command" this is normal
* Volume Down to select "apply update from ADB" and press power button
* You should probably hear/see Windows loading the device
* On windows try "adb get-state" it should respond with "sideload"). The usual ADB commands do not work!
* adb sideload kitkat_Bootanimation.zip (http://d-h.st/4kc)
* sending: 'kitkat_Bootanimation.zip' 100%
* Fails with messages on phone (MD5 matches and also fails with known good "Tibuke1080x1920.zip"):
* Verifying update package
* E:footer is wrong"
* E:signature verification failed
* installation aborted
As the MD5 matches that listed on the site (and I've tried another known OK zip) I believe that the verification that fails is a comparison between the zip and the correct files for the version of android I'm on. If not let me know what might cause this.
The zip and the instructuions I'm basing the above on is at: http://forum.xda-developers.com/showpost.php?p=50201803&postcount=11
I seem to have a "BootBox" backup file in "/sdcard/BootBox/Backups/BHXIAY~A.ZIP", but that one isn't flashable... Ayyone know where I can get a flashable version or how to create one?
I am doing the above at the recommendation of someone in response to my question at "http://forum.xda-developers.com/showpost.php?p=50312962&postcount=12" (my questions weren't answered so I'm stuck that way).
Thanks for any pointers,
Dennis
If ur device is unlocked then, u can flash a custom recovery and flash back the stock boot animation zip
Did u tried the adb push command and send the stock bootanimation file to /system/media
varuntis1993 said:
If ur device is unlocked then, u can flash a custom recovery and flash back the stock boot animation zip
Click to expand...
Click to collapse
Thanks got some strange error/warning messages but that did the trick. Thanks.
varuntis1993 said:
Did u tried the adb push command and send the stock bootanimation file to /system/media
Click to expand...
Click to collapse
This doesn't work, it will next time after I install: http://forum.xda-developers.com/showthread.php?t=1687590
dbareis said:
This doesn't work, it will next time after I install: http://forum.xda-developers.com/showthread.php?t=1687590
Click to expand...
Click to collapse
Or adb whilst booted into custom recovery
Sent from my Nexus 5 using Tapatalk
dbareis said:
Thanks got some strange error/warning messages but that did the trick. Thanks.
This doesn't work, it will next time after I install: http://forum.xda-developers.com/showthread.php?t=1687590
Click to expand...
Click to collapse
rootSU said:
Or adb whilst booted into custom recovery
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yea that works but for that u need to be in the recovery mode....I m using twrp and I can push and pull files
This is a thread for installing TWRP on the Umi A1 Pro
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
TWRP 3.2.1-0: Here
Steps to install TWRP
First of all, you will be required to unlock your bootloader.
Activate OEM Unlocking in developer settings
Activate USB debugging in developer settings
Now, open a terminal, if on Linux, or command prompt if on windows, and enter the following:
Code:
adb reboot bootloader
Code:
fasboot oem unlock
Follow the onscreen instructions to unlock your bootloader. THIS WILL WIPE YOUR DEVICE!!!
Once this is complete, it will go back to the fastboot screen.
Now, from within your terminal/command prompt, navigate to the folder where you have downloaded the above recovery.img to.
Enter the following command once there:
Code:
fastboot flash recovery recovery.img
This will flash TWRP to your device, overwriting the stock recovery.
Once this is complete, there will be a screen telling you how long it took etc. Now you need to hold down your volume up button, and power button. Keep holding these until you reach the menu for recovery, fastboot or normal mode.
Select Recovery.
This will boot you into TWRP
You will have to go through the setup of the whole android system again, but its worth it you now have TWRP to install the Custom ROMs that will be coming shortly
Have Fun!
Is this twrp good for treble GSI install?
I'm assuming this TWRP doesn't have the encryption issue? The one I currently have keeps flagging for a password.
peetee0007 said:
I'm assuming this TWRP doesn't have the encryption issue? The one I currently have keeps flagging for a password.
Click to expand...
Click to collapse
This one is asking for password as well.
Does it actually work with your own password? Only way around it now is to wipe data and reboot into recovery before encryption takes place. Pain in the rear.
I can't get the Twrp flash to work. It stays with the old recovery mode no matter what.
Here's my story. I've managed to apply this correctly once to my phone before, but due to me messing around with system file I've soft-bricked my phone and had to flash the official stock rom for it, I picked the C390_FE_K8B_UMI_20180601_1838 cause "Hey, higher number should mean more recent." I'm not sure what was the version of the phone when it was brand new and now it seems that the phone is completely immune to rooting.
Any idea what I've might done wrong when unbricking my phone?
----------------------------------------------------------------------------------
I managed to get it to work again, turns out I had to let the wireless update take place, then after a couple fails with the "adb reboot bootloader" command I read the list of stuff that gets thrown into cmd when you just do adb. Reading the commands I saw a "adb reboot-bootloader" so I do that one, gets me to the fastboot screen and then I'm able to proceed along with the guide.
Moral: If you have to unbrick the phone by flashing the original rom into it, let the wireless update take place before attempting anything else with the phone.
Thanks for the twrp recovery, now I just gotta defeat the encryption.
Awesome work! How did you figure out how to get USB to work?
I will try this but can you share what custom roms can i use on this twrp/phone?
blitzlee06 said:
I will try this but can you share what custom roms can i use on this twrp/phone?
Click to expand...
Click to collapse
You can flash pretty much most of these GSI ROMs.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
stevea76 said:
You can flash pretty much most of these GSI ROMs.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Click to expand...
Click to collapse
how to check if im using the right architecture and partition style?
blitzlee06 said:
how to check if im using the right architecture and partition style?
Click to expand...
Click to collapse
64-bit quad core, ARM Cortex-A53= arm64bit ,bbut doen'st mean camera or other feature will work out of the box...
Diomorgan said:
64-bit quad core, ARM Cortex-A53= arm64bit ,bbut doen'st mean camera or other feature will work out of the box...
Click to expand...
Click to collapse
how about the partition style?
blitzlee06 said:
how about the partition style?
Click to expand...
Click to collapse
Arm64 A only
Hello , This is a guide for Flashing TWRP and Flashing GSI (Treble ROMS) on Infinix Smart 3 Plus .
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FLASHING TWRP
Pre-requisites
The main requirement before you can have this recovery on your Infinix X627 is that the bootloader MUST be unlocked. In addition, make sure you have ADB and FASTBOOT set up correctly on your PC.
N/B : Make sure you've the latest ADB & FASTBOOT Installed .
INSTALLATION INSTRUCTIONS
Download this Infinix-X627-TWRP-V2.img
Download this Vbmeta img
Boot your device into fastboot mode.
In the directory containing the recovery you downloaded, open up a CMD/PowerShell and run this command
Code:
fastboot flash recovery Infinix-X627-TWRP-V2.img
While in fastboot and run this command
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After Flashing , Boot Into TWRP(recovery) (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Infinix Smart 3 Plus
Incase you are asked for the password to decrypt your device, just ignore that step, go to the Wipe Menu and Format Data. This process will wipe all your data so make a point of backing up your important data.
yeahhh we have twrp
djancuuk said:
Click to expand...
Click to collapse
Which TWRP do you mean ?
Flashing ROMs tutorial coming soon
Thanks
majorkid said:
Flashing ROMs tutorial coming soon
Click to expand...
Click to collapse
AT Last Infinix Smart 3 PLUS Have TWRP.
I Was Waiting For This Recovery From past 5 months!
Thanks A Lot XDA And Its Developers Specially Include Who Made This Possible.
Many Major Problems!!!!
majorkid said:
Hello , This is a guide for Flashing TWRP and Flashing GSI (Treble ROMS) on Infinix Smart 3 Plus .
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FLASHING TWRP
Pre-requisites
The main requirement before you can have this recovery on your Infinix X627 is that the bootloader MUST be unlocked. In addition, make sure you have ADB and FASTBOOT set up correctly on your PC.
N/B : Make sure you've the latest ADB & FASTBOOT Installed .
INSTALLATION INSTRUCTIONS
Download this Infinix-X627-TWRP-V2.img
Download this Vbmeta img
Boot your device into fastboot mode.
In the directory containing the recovery you downloaded, open up a CMD/PowerShell and run this command
Code:
fastboot flash recovery Infinix-X627-TWRP-V2.img
While in fastboot and run this command
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After Flashing , Boot Into TWRP(recovery) (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Infinix Smart 3 Plus
Incase you are asked for the password to decrypt your device, just ignore that step, go to the Wipe Menu and Format Data. This process will wipe all your data so make a point of backing up your important data.
Click to expand...
Click to collapse
I have found 4 Major problems
1:- unable to mount /data/media/twrp/.twrps
2:-After wipe and formate data then internal storage mounted but After reboot and set up the Phone Then TWRP again show Internal Storage (0MB).
3:-Un root in Advanced option not working and MTP also not working. /data and /root and other directories also not visible even all option are marked inside Mount button.
4:- Root install in Advanced option or latest Magisk flash able zip file and Superuser file successful installed but after reboot these apps APK are not present in Apps list. Phone also not rooting via Magisk Patched image.
Request:- Please solve these major issues.
Infinix smart 3 plus(X627) architecture is (ARM) and this Phone support treble Slot A but no one ARM(Slot A and AB) and ARM64(Slot A and AB) GSI image working.
There is no Mooke ROM available for this device.
Sir i request to you.
Sir please make a full stable and fast custom rom for infinix smart 3 plus..Thanks Nice Work...Gor TWRP...??:good:
pliz make infinix smart 3 plus custom rom
It's Working
Thank you so much Sir
Reboot Issue
After installing recovery whenever I reboots to system(sooner or later),your recovery gets wiped off. Is this usual or I am doing something wrong.
please make it for infinix smart4
---------- Post added at 04:54 PM ---------- Previous post was at 04:50 PM ----------
Please make twrp infinix smart4:بكاء:
Dear Sir,
Thank you so much for this recovery. Please make recovery of Infinix Hot 10 (x682). I really need this to flash Custom Roms and GSI.
I shall be very thankful to you.
Best Regards
Bilal Nawaz
Bilal nawaz said:
Dear Sir,
Thank you so much for this recovery. Please make recovery of Infinix Hot 10 (x682). I really need this to flash Custom Roms and GSI.
I shall be very thankful to you.
Best Regards
Bilal Nawaz
Click to expand...
Click to collapse
Any update?
mr.namansoni said:
Any update?
Click to expand...
Click to collapse
Here is complete method to Install GSI Rom without TWRP....
Bilal nawaz said:
Here is complete method to Install GSI Rom without TWRP....
Click to expand...
Click to collapse
yeah method is good. But i was talking about twrp. Have you got twrp for infinix hot 10
mr.namansoni said:
yeah method is good. But i was talking about twrp. Have you got twrp for infinix hot 10
Click to expand...
Click to collapse
I asked from him. He is saying TWRP recovery of Infinix Hot 10 will release soon
Bilal nawaz said:
I asked from him. He is saying TWRP recovery of Infinix Hot 10 will release soon
Click to expand...
Click to collapse
okay waiting for it
I bro.I have infinix smart 3 plus 2gb ram and 32 gb rom not 3 gb ram.Can i use these same files!?
Bilal nawaz said:
It's Working
Thank you so much Sir
Click to expand...
Click to collapse
is your smartphone working with that root method??Did you really try it?
majorkid said:
Hello , This is a guide for Flashing TWRP and Flashing GSI (Treble ROMS) on Infinix Smart 3 Plus .
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FLASHING TWRP
Pre-requisites
The main requirement before you can have this recovery on your Infinix X627 is that the bootloader MUST be unlocked. In addition, make sure you have ADB and FASTBOOT set up correctly on your PC.
N/B : Make sure you've the latest ADB & FASTBOOT Installed .
INSTALLATION INSTRUCTIONS
Download this Infinix-X627-TWRP-V2.img
Download this Vbmeta img
Boot your device into fastboot mode.
In the directory containing the recovery you downloaded, open up a CMD/PowerShell and run this command
Code:
fastboot flash recovery Infinix-X627-TWRP-V2.img
While in fastboot and run this command
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After Flashing , Boot Into TWRP(recovery) (Power + Volume Up) to confirm that you have successfully flashed TWRP on your Infinix Smart 3 Plus
Incase you are asked for the password to decrypt your device, just ignore that step, go to the Wipe Menu and Format Data. This process will wipe all your data so make a point of backing up your important data.
Click to expand...
Click to collapse
After installing this recovery, whenever I try flashing any zip, I always get same error. 2 section of red lines.
Same problem even for rooting using internal option.