After flashing the ROM Axlor_NexS_HDBlog not reading that it contained a radio and mine is a ATT Nexus s and after flashing the rom i no longer have service and i restored to an older ROM and still no service. I changed the radio back to the one i had before and still nothing. Any suggestions are greatly appreciated.
Do you get emergency calls only or nothing at all? I would say dial *#*#4636#*#* and mess with your radio options to see if that helps, but I could be wrong
Sent from my Nexus S using XDA App
PoseyBAH said:
After flashing the ROM Axlor_NexS_HDBlog not reading that it contained a radio and mine is a ATT Nexus s and after flashing the rom i no longer have service and i restored to an older ROM and still no service. I changed the radio back to the one i had before and still nothing. Any suggestions are greatly appreciated.
Click to expand...
Click to collapse
I have the exact same AT&T Nexus S and ran into the SAME problem last night. I am currently using it on Rogers. What you should do is flash your phone with 2.3.4 GTJ61 (NOT GRJ22 - for some reason it wouldn't catch radio connection).
You can find the full ROM in the following thread: (you MUST flash using Clockwork mod recovery bootloader)
http://forum.xda-developers.com/showthread.php?t=1063664
Android 2.3.4/GTJ61/UCKE1 Radio/KA3 Bootloader
After having a number of FC and random issues with my phone I decided to return it to factory state, I flash the stock image from the Clockwork app and ever since I have no service. I let the phone go through the update from 2.3.3 to 2.3.4 via wifi and had the same issue. I tried to manually flash the latest AT&T radio with no luck. My phone is now flashed the stock GRj22 Rom and baseband KD1 and I still show no signal please help!
HavocDroid said:
After having a number of FC and random issues with my phone I decided to return it to factory state, I flash the stock image from the Clockwork app and ever since I have no service. I let the phone go through the update from 2.3.3 to 2.3.4 via wifi and had the same issue. I tried to manually flash the latest AT&T radio with no luck. My phone is now flashed the stock GRj22 Rom and baseband KD1 and I still show no signal please help!
Click to expand...
Click to collapse
KD1 is a tmobile baseband/radio
http://forum.xda-developers.com/showpost.php?p=13475125&postcount=1
Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)
I've tried just about everything to flash a new version of the radio firmware on my 9020a. I've used the Radio Flashing Guide and tried every version available for the 9020a. Each time, the flash reports that it was successful, but no matter which one I choose, baseband still shows I'm running i9020aucke1 when I boot it back up.
I've also flashed the stock ICS OTA update 4.04 for the 9020a, thinking "well, THAT has to do it." but still I'm stuck on cke1.
Are there permissions that may be wrong? Is there anything else I can do? I want to flash a new radio because e1 is terrible for me. It won't switch between "3g" to "H" and just spins it's wheels and I get no data. Sometimes I get ZERO signal. If I reboot or switch Airplane Mode on & off, data comes back and works for a while, but then reverts back to working like crap.
Thanks a lot.
Update
I was trying to flash via Clockworkmod. I used ADB FASTBOOT and the radio is now on J1.
So, if Clockworkmod isn't working, use ADB FASTBOOT.
metalgeek said:
I've tried just about everything to flash a new version of the radio firmware on my 9020a. I've used the Radio Flashing Guide and tried every version available for the 9020a. Each time, the flash reports that it was successful, but no matter which one I choose, baseband still shows I'm running i9020aucke1 when I boot it back up.
I've also flashed the stock ICS OTA update 4.04 for the 9020a, thinking "well, THAT has to do it." but still I'm stuck on cke1.
Are there permissions that may be wrong? Is there anything else I can do? I want to flash a new radio because e1 is terrible for me. It won't switch between "3g" to "H" and just spins it's wheels and I get no data. Sometimes I get ZERO signal. If I reboot or switch Airplane Mode on & off, data comes back and works for a while, but then reverts back to working like crap.
Thanks a lot.
Click to expand...
Click to collapse
What recovery and what version are you using?
Hi all,
I have a problem with my one S s4 europe
I have no signal on network and my wifi doesnt work
It was rooted and not working and i reversed it back to stock
so i relocked the bootloader and flashed it with ruu 2.31.401.5
Now everything works except the wifi and celluar
it ask for my pincode but there is no reception
The wifi shows its on but there are none wifi spots to connect
i think something is wrong with the radio or with the HBOOT (1.14)
ive have tried rooting it again and flashed a new rom with no succes
i dont know what to do now
maybe someone here has a solution?
sorry for the language,i am dutch
Did you pull and reinsert your sim
Redo your apn's for your carrier
Flash a CM rom like a nightly, they have radio built in--might help
Be aware you will need flash boot image from fastboot after rom and gapps
Or, if can't do fastboot, download Flash Image GUI from market to pc and copy to sdcard. You would then have to get .apk file install as an apk--
Hi rugmankc
I did pull the simcard with no succes
I did the apn settings to
But i will try a nightly rom today and let you now if it works or not
thanks for your advice