Database Info

[Q] Last resort before i have to replace :/

Yesterday i decided to test few roms out so i backed up my current and flashed.
had no problems until i flashed cognition 2.3b2 , after i had i felt i didn't like it and went to restore my backup. Instead however i received errors in the recovery and it seemed to restore way too quickly still with errors. As of that point my phone will not boot my screen seems to glow after hitting the power button but nothing ever comes up its completley black , i can however get into download mode and i have tried numerous times to restore with odin , instead of restoring to stock though it gets stuck on odin at :
Code:
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
and occasionally at :
Code:
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> boot.bin
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
the only thing i can think of that could have caused this is possibly voodoo being enabled when i tried to restore. If this is the case , is there any way to fix it , assuming people have done this before.
If all else fails i will just get the phone replaced, not an issue of money however there is a lot on my internal that i would like to keep , would there be any way to get it off the internal without having to start the phone , maybe through download mode ?
In advance, thank you
-Cristian

Man, that sucks. Have you tried one of the one-click odins? I think there's a one-click that can take you back to stock JF6, and I know there's a leaked 2.2 one-click floating around. Maybe you will have better luck with those, since they're all-in-one packages?

modest_mandroid said:
Man, that sucks. Have you tried one of the one-click odins? I think there's a one-click that can take you back to stock JF6, and I know there's a leaked 2.2 one-click floating around. Maybe you will have better luck with those, since they're all-in-one packages?
Click to expand...
Click to collapse
thanks for the input, The problems im having are with the stock jf6 one click odin.
Should have been more specific ,
This 2.2 one click seems promising though, im willing to try anything at this point!

Here's what I would do:
0. Download ODIN3. http://forum.xda-developers.com/showthread.php?t=731989
1. Pull the battery, sim card, and external SD card.
2. Start ODIN3.
3. Insert your battery, then press and hold the volume buttons.
4. Connect the phone to your PC.
5. Click start.
Once the new ROM is installed, boot the phone and enable USB debugging. Start ODIN3, connect the phone, then click master clear.

kegobeer said:
Here's what I would do:
0. Download ODIN3. http://forum.xda-developers.com/showthread.php?t=731989
1. Pull the battery, sim card, and external SD card.
2. Start ODIN3.
3. Insert your battery, then press and hold the volume buttons.
4. Connect the phone to your PC.
5. Click start.
Once the new ROM is installed, boot the phone and enable USB debugging. Start ODIN3, connect the phone, then click master clear.
Click to expand...
Click to collapse
This is what ive been trying to do,
it hangs up during the flash however, ive left my phone connected for 3 hours while doing it to see if it was just going to take a long time and that didnt even help still stuck on one of the 2 parts that i posted in my original post.

[Q] Odin3 - Stuck on "DO NOT TURN OFF TARGET"

Need a little help. I'm in the process of testing out FF 2.04, coming from Andrometa. I'm trying to flash back to stock, but it's getting stuck in Odin3. I can get the phone in download mode, it just won't complete. Any ideas?
This is the output from odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
Normally this process goes quick, so I know something is out of whack. Thanks for any help!

My fix for this has always been to pull the battery and try again. It'll work eventually. Last night I did it five or six times before rebooting my laptop, then it worked right away. Keep in mind that this puts you in the phone-! -computer screen, so if you have a phone that doesn't have the three button combo wait and see if anyone else has better advice.

Pull the plug and see if the phone will boot. If odin never started writing to the phone you will be back where you started. Then just flash straight to next rom. Odin sometimes acts up and a reboot of computer, different port, change of cable, or just trying again seems to normally fix the issue though.

rebooting my pc fixed the issue. Thanks for the help!
Sent from my SAMSUNG-SGH-I897 using XDA App

Blaze Hard Bricked

Long Story Short:
I think I hard bricked my blaze
LONG STORY:
1. I tried flashing CWM into rooted konane's kernal (Stock ROM)
failed numerous times , accidently left "Re-partition on" ; but still the phone booted fine
every thing was working ;
2. Went into CWM ; made a nandroid backup
3. installed Dknight rom
4. Flashed Dknight (Wipe cache ; davlik cache wipe; then flashed)
5. phone never booted beyond the RED ORBS
6. I realized Now Im soft bricked
7. went into odin tried the soft brick method ; failed all the way
8. "Firmware upgrade encountered" error message ; phone is not recognized by windows neither kies nor ODIN
Conclusion:
I think I hard bricked
I NEED HELP !!!!!!!!!!

Not hard bricked that's soft bricked luckily for you and that's just another form of download mode
Take out battery and dc from USB cable now with Odin open and USB cable connected to PC only. Then put battery back in and hold the two volume buttons and plug the USB cable into phone then you will again see ur screen but Odin should recognize iit now ans well flash the tar
Just fyi if your phone turns on to any screen it isn't hard bricked
Now if it doesn't turn on at all then it might be hard bricked
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol

I did that same crap when i first rooted this phone i didnt realize repartition rechecks it self that little silly [email protected] progam made me think i destroyed my phone but...eventually found a guide on google but what erik said will fix your issue, just to verify.
Sent from my SGH-T769 using xda app-developers app

Lol yep yep I've had my share of soft and hard bricks so I know how to fix em
Also, this is the main reason I hate Odin and prefer heimdall over it.
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol

erikmm said:
Lol yep yep I've had my share of soft and hard bricks so I know how to fix em
Also, this is the main reason I hate Odin and prefer heimdall over it.
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Click to expand...
Click to collapse
OMGGG it freaking worked !!!! ****you very much (xtreme form of my thanx) ~~~~~

atifahmed33 said:
OMGGG it freaking worked !!!! ****you very much (xtreme form of my thanx) ~~~~~
Click to expand...
Click to collapse
Lol glad I could help but if you are thankful hit the thanks button
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol

btw ... erik whens the new update coming for Dknight ROM... :highfive:

atifahmed33 said:
btw ... erik whens the new update coming for Dknight ROM... :highfive:
Click to expand...
Click to collapse
I think you're new here but not sure so just to let ya know asking for ETA's isn't cool around here...
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol

Yaah dude ..... Kinda new ... just wanted like a update thingy... As you're ROM made me kinda jumpy lol
Btw sorry
Sent from my SGH-T769 using xda premium

spsamat thefe
my is with same mode but it wont work
i forgot to uncheak re partiiton
i try and it does not do anything
i goes to that odin mode screen and connects to odin but it say
and then i follow this steps hear to flash to stock http://forum.xda-developers.com/showthread.php?t=1591601
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> 7z¼¯'
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help i cant get it fixed

Boss777 said:
my is with same mode but it wont work
i forgot to uncheak re partiiton
i try and it does not do anything
i goes to that odin mode screen and connects to odin but it say
and then i follow this steps hear to flash to stock http://forum.xda-developers.com/showthread.php?t=1591601
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> 7z¼¯'
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help i cant get it fixed
Click to expand...
Click to collapse
are you getting the same screen as atifahmed33? with the "Firmware upgrade encountered an error"? if so, do what erikmm said:
disconnect usb
pull battery
open odin application
put battery back in
plug in usb cables
push and hold BOTH volume up and volume down
press and hold power until the download mode warning screen pops up
release all buttons held
press volume up once
voila! you're in download mode
Odin should now recognize your device. if it doesn't, verify your computer recognizes your device (in windows, go to computer management->device manager, cant remember in linux, who cares in OSX, its an inferior OS)
I must have soft bricked my phone about 10 times over the weekend forgetting that stupid little check

I cant remember if you need the drivers too...
http://www.samsung.com/us/support/owners/product/SGH-T769NKBTMB
Check and see if that fixes. Also are you getting into download mode?

dispozable said:
I cant remember if you need the drivers too...
http://www.samsung.com/us/support/owners/product/SGH-T769NKBTMB
Check and see if that fixes. Also are you getting into download mode?
Click to expand...
Click to collapse
for odin, yes. although if you have kies installed it should be good to go :/

i got kies it connects to odin but i know how to go to download moad it wont go there when i hold buttons it goes to that manu that says push up for download moad i did and it goes to that firmware upgrade encountered an issue please select recovery mode in kies and try again window but i can connect to odin and it starts but it gives me that error
---------- Post added at 07:03 AM ---------- Previous post was at 06:59 AM ----------
hear i just did again it connects to odin i can see that yellow but it wont go truth
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> 7z¼¯'
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
just did it again

it does not meter if i go to download moad or just power the phone it always goes to this screen and wont connect to kies but i connect to odin and it wont do all restore thing

hear is what it looks like

Do you MD5's match?

chjema said:
Do you MD5's match?
Click to expand...
Click to collapse
that's the only thing I can think of... bad download....

Boss777 said:
hear is what it looks like
Click to expand...
Click to collapse
I ran into a similar problem yesterday while trying to Odin back to stock. Couldn't figure out what going on after 2 or 3 unsuccessful attempts. I redownload the tar file several times, and decided something else had to be the culprit. And VOILA, it was my usb cable. It wasn't connected good, I think my port is a little loose. So before I clicked "start" in ODIN, I held the phone in my hand and made sure the usb had a good firm connection with the other and it worked. It may work for you as well.

Captivate-me said:
I ran into a similar problem yesterday while trying to Odin back to stock. Couldn't figure out what going on after 2 or 3 unsuccessful attempts. I redownload the tar file several times, and decided something else had to be the culprit. And VOILA, it was my usb cable. It wasn't connected good, I think my port is a little loose. So before I clicked "start" in ODIN, I held the phone in my hand and made sure the usb had a good firm connection with the other and it worked. It may work for you as well.
Click to expand...
Click to collapse
good idea. also, its always best to use the USB cable that came with the device

Need help with failed Root attemt Galaxy S3

Hello, wasnt sure where to put this thread, so i put it here.
I tried to root my GS3, that vent very wrong, now i cant start my phone, it only say "Samsung Galaxy S III" and thats it,
i tried to get back to stock using Odin, but odin stops at "Nand write start"
tried re-partionating with new Pit file, same problem still as above, (used pit file for 16gb, witch my phone is) when i do this with odin everything works fine, until im im putting Stock firmware into "pda" in odin, then it locks "nand write start"
Hard reset dont work, (pwr-home-volume Up) does nothing, but i can get my phone into download mode,
Usb Debugging was on before we started,
Unknown sources was on.
everything "kies" shut of
tried diffrent USB cables and ports.
Branded Yes.
event tried with Antivirus and firewall shut off.
anyone know what i can try next? cant it be anything with Bootloader or the kernel?
thanks alot for answers
and sorry for bad english.

glennisn said:
Hello, wasnt sure where to put this thread, so i put it here.
I tried to root my GS3, that vent very wrong, now i cant start my phone, it only say "Samsung Galaxy S III" and thats it,
i tried to get back to stock using Odin, but odin stops at "Nand write start"
tried re-partionating with new Pit file, same problem still as above, (used pit file for 16gb, witch my phone is) when i do this with odin everything works fine, until im im putting Stock firmware into "pda" in odin, then it locks "nand write start"
Hard reset dont work, (pwr-home-volume Up) does nothing, but i can get my phone into download mode,
Usb Debugging was on before we started,
Unknown sources was on.
everything "kies" shut of
tried diffrent USB cables and ports.
Branded Yes.
event tried with Antivirus and firewall shut off.
anyone know what i can try next? cant it be anything with Bootloader or the kernel?
thanks alot for answers
and sorry for bad english.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1331782 Here you can see how to make so called "restore cable", maybe more luck with this one?

correct Pit file solved everything btw Usb Jig dont do anything to GS3 exept starting download mode

I am currently having this same problem, and what I get back from Odin is (when I try to use the PIT file to repartition)
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Now I'm guessing I used the right PIT file, but I really don't know what I'm doing with it.

[Q] can't get into download mode

So I was trying to root my phone. Kinda went through a quick crash course of it with Odin. For some reason it kept hanging up at boot.img but that's a different story. Long story short, after numerous tries, I forgot to unclick repartition. Why it clicks itself when you load up the PIT is beyond me. Personally, I think the developer got a kick out of people bricking their phones that way. **** him/her. Anyway, I can't get into download mode anymore, even with a JIG. Anybody got any ideas before I send it for JTAG?

crimsondragon said:
Personally, I think the developer got a kick out of people bricking their phones that way. **** him/her.
Click to expand...
Click to collapse
Talking like that will likely not get you any help here...
Please everyone refrain from posting the rule about searching and reading as this should resolve itself (should the OP actually search and read).

anactoraaron said:
Talking like that will likely not get you any help here...
Please everyone refrain from posting the rule about searching and reading as this should resolve itself (should the OP actually search and read).
Click to expand...
Click to collapse
I've searched through enough threads as it is with a combination of different keywords and all I've found is a bunch of people explaining how to get into download mode or others saying so and so can be fixed as long as you can get into download mode. With the latter, if you can't get into download mode, then what?

Just for the record, I've already tried reflashing it to stock with a .tar file. That failed miserably.
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Kind of an improvement as before it would just hang at boot.img but now at least I can get a confirmation of whether it works or not. Currently the phone is still showing the "Firmware upgrade encountered blah blah" crap. But I tried it anyway as I read that it's supposedly a front.
Can't get into stock recovery either. Top left corner says Odin mode. Odd as the JIG puts it into Factory mode. I've uninstalled/installed the Samsung drivers several times. I've changed the USB cable to a Samsung one that I got like a month ago. I have Kies installed. Can't connect the phone to it either. I've tried flashing with Kies not installed and with it installed and shut down/not shut down. Don't think I missed anything else but if I did I'll add it.

crimsondragon said:
Just for the record, I've already tried reflashing it to stock with a .tar file. That failed miserably.
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Kind of an improvement as before it would just hang at boot.img but now at least I can get a confirmation of whether it works or not. Currently the phone is still showing the "Firmware upgrade encountered blah blah" crap. But I tried it anyway as I read that it's supposedly a front.
Can't get into stock recovery either. Top left corner says Odin mode. Odd as the JIG puts it into Factory mode. I've uninstalled/installed the Samsung drivers several times. I've changed the USB cable to a Samsung one that I got like a month ago. I have Kies installed. Can't connect the phone to it either. I've tried flashing with Kies not installed and with it installed and shut down/not shut down. Don't think I missed anything else but if I did I'll add it.
Click to expand...
Click to collapse
I believe that has been discussed also. Pull the battery, re-enter download mode and flash again. When it doesn't complete properly it won't let you Odin again until the battery is pulled.
Just curious but are you on ICS 4.0.4? If so the Odin root is exclusive to gingerbread... Odin cwm and a flash a rom or just Odin back to stock. Root through ICS is obtained by flashing supersu zip through cwm when on ICS.
I realize you are frustrated, but the devs here are awesome and deserve respect, especially since they just brought 4.3 to us.
Sent from my SGH-T769 using xda app-developers app

anactoraaron said:
I believe that has been discussed also. Pull the battery, re-enter download mode and flash again. When it doesn't complete properly it won't let you Odin again until the battery is pulled.
Just curious but are you on ICS 4.0.4? If so the Odin root is exclusive to gingerbread... Odin cwm and a flash a rom or just Odin back to stock. Root through ICS is obtained by flashing supersu zip through cwm when on ICS.
I realize you are frustrated, but the devs here are awesome and deserve respect, especially since they just brought 4.3 to us.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Got it figured out. I was surfing the other subforums and landed on the thread talking about Odin 3.07 and I figured why the hell not. The flash to stock was a success. Then I did the root and CWM Recovery. All is well. 3.07 is much better than 1.85. For the record, I am on GB. Thanks for the help. I apologize for earlier as it was indeed frustrating.