OK, so after some work(and luck) I think I have the APN settings for the Inspire figured out for those that are using custom ROM's. Here is my step by step guide to get it all working. Data, MMS, all work great like this for me on CM7 and others.
1. Boot into your favorite custom ROM.
2. Go to Settings, then Wireless and Network, then choose Mobile Network, then APN settings (YMMV, ROMS can differ, but the actual APN screens are the same once you get there)
3. Check what APN you have already. If your name is "phone" and there is no wap.cingular, go to step 3a. If you have wap.cingular and no "phone" as name, go to step 3b.
3a. Create new APN (menu key, new APN) The Name field can be MMS, or AT&T or whatever. The following are the settings that have yet to fail me(the password is CINGULAR1):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once entered and saved, go to your other APN and verify mms is NOT listed under it.
3b: Create new APN named MediaNET(rename other if needed, this MAY not be necessary, but it is what I did) and set it up as follows: APN: phone; APN Type: "default, supl". Menu button - Save. Change APN Type on other APN to "mms". Menu button - Save.That's it for this one. Once done, the new APN should be the only selectable one.
4. Enjoy.
The final settings should look lime the following:
Name: MediaNet
APN: phone
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: default,supl
Name: mms
APN: wap.cingular
Proxy:
Port:
Username: [email protected]
Password: CINGULAR1
Server:
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: mms
So.. you lost me. I have one APN with the following settings:
Name: AT&T
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: WAP.CINGULARGPRS.COM
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: mms
This gives me MMS and calling features but no internet obviously. What settings do I use to make the correct APN to get the internet to work? I just want to make sure I have everything exactly correct so I resolve this problem.
brandon827 said:
Just to clarify, this will give me two APN's right? And does the MediaNET APN have any other settings? It seems to be working instantly as soon as I changed it to this.
Click to expand...
Click to collapse
Yes, it gives you two, and no, the default info in the MediaNET APN is all you need.
I reset to default APN, it made one for me and I made another. Now I have two APN's... The first is the default, second is the one I made for mms.
Name: MediaNet
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: WAP.CINGULARGPRS.COM
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.32
MMS port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: *
Name: mms
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: WAP.CINGULARGPRS.COM
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: mms
The only one that can be selected under APNs is the MediaNet one. Are my settings correct?
The first one is wrong. The APN Name should be phone. Almost none of the other info is necessary.
Sent from my Desire HD using XDA Premium App
Brandon, here is how it should be.
Name: MediaNet
APN: phone
Proxy:
Port:
Username:
Password:
Server: <not set>
MMSC:
MMS proxy:
MMS port:
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: default,supl
Name: mms
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: WAP.CINGULARGPRS.COM
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: mms
Sent from my Desire HD using XDA Premium App
I nominate this for a Sticky!
Haha I will clean the op in the morning. I typed this up while trying to leave work.
Sent from my Desire HD using XDA Premium App
Well... I set everything to that EXACTLY and on Auto GSM/WCDMA it worked. Then I restared my phone and its back to the same old crap. Only works in GSM only. I'm ready to take this thing out back and put a few rounds in it with my .45
Now it works. Hmm. 871kbps down/609kbps up. I'm thinking it's just AT&T's network having issues.
brandon827 said:
Now it works. Hmm. 871kbps down/609kbps up. I'm thinking it's just AT&T's network having issues.
Click to expand...
Click to collapse
A very distinct possibility. I have had zero trouble with these settings.
Sent from my Desire HD using XDA Premium App
Yeah since I just got 3041kbps down/1275kbps up, lol.
No mobile data stuck on GSM
I am having this same kine problem.. last night edge and Hspa stopped working.. I spent an hour talkin to an att specialist and he could not help..I changed my apn settings.. nothing phone wont go past GSM... no edge no hspa nothing...
If this keeps up then imma have to take it back and get a new one.. sucks cuz i'll have to root again and it was a pain in the butt last time ..
I have no idea what happened
Went down the street where there is better signal and it started jumpin on EDGE and HSPA... so I don't know if its a weak antenna in the phone on or a weak signal from At&t
I fixed my problem with the hinky switchover from wifi to 3g/4g by adding a second apn by choosing 'reset to default' which created a new one named MMS/wap.cingular.
brandon827 said:
I reset to default APN, it made one for me and I made another. Now I have two APN's... The first is the default, second is the one I made for mms.
Name: MediaNet
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: WAP.CINGULARGPRS.COM
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.32
MMS port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: None
APN type: *
The only one that can be selected under APNs is the MediaNet one. Are my settings correct?
Click to expand...
Click to collapse
That's what I have and Data and MMS are working fine on the cellular network and on WiFi.
im on cm7 nightlys and this is what i have...
Name: ATT
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: WAP.CINGULARGPRS.COM
Password: <not set>
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,mms
Should i change it to what the settngs are on the first post...
I tried both the nightly settings and these settings and never really had an issue with mms. These settings did help with android revolution though. Only problem I had with nightlies was that data speed went down to only 12 KB up and down. Slower than edge so had to go back.
Sent from my Inspire 4G using XDA Premium App
I
ive reset to deftault and i have two apn
1. Media Net
phone
2. MMS
wap.cingular
they are both locked so i can not alter them, ive tried going off the information above but it does not work, tried restarting 3 times and deleted all messages and tried to send new one, still no go.
i see an issue from the number 2 apn is
the user name is [email protected]
instead of what you guys have it as wap.cingular.com
Please help I'm in desprite need of this feature my job relies on picture messaging
RiNo808 said:
im on cm7 nightlys and this is what i have...
Name: ATT
APN: wap.cingular
Proxy: <not set>
Port: <not set>
Username: WAP.CINGULARGPRS.COM
Password: <not set>
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,mms
Should i change it to what the settngs are on the first post...
Click to expand...
Click to collapse
If our suppositions are right and the first nearly empty APN is the "4G" APN, then yes. If not, then it won't matter a bit.
Related
Does anyone have the apn settings for tmobile? I can't find them and so far the phone can receive but not send
Theses are the settings I am using on T-Mobile US, and they work great. In my case I had to get GoSMS and manually add the User Agent and UA Prof before my MMS would come through where they could be seen.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN Type: default,supl,mms
I tried those but it doesn't work, anything else I can mess with?
Wanted to see if I could get some working APN settings for unlocked atrix 2 mms web ect...... With the default apn i was unable to send mms but i could receive them..... Currently i am unlocked on T-mobile and this config seems to work.....
Name: T-Mobile Data (or T-Mobile US)
APN: epc.tmobile.com
Proxy: <Not set>
Port: <Not set>
Username: None
Note: For the Username, enter "None" with the keypad. Do not leave it not set.
Password: <Not set>
Server: <Not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Not set>
MMS port: <Not set>
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: default,supl,admin,dun,mms
Press the Menu key.
Touch Save.
Power off turn on and good to go
Took a few before it worked I have heard you have to send or receive 2 pics before it works?????
If anyone would like to add other provider apn's or a better T-mobile apn pls do so.....
Edit: I take no credit for this but found it could be helpful.....
installed new base and update as well as modem successfully. I am having trouble with the 4g connectivity on ATT. I imputed all the APN input information that was provided by this link: http://forum.xda-developers.com/showthread.php?t=1653022
asking for help with how to fix this issue. Simply put my data wont turn on. any solutions.
furthermore here is what i have now
Name: ATT LTE
APN: pta
Proxy: <not set>
Port: <not set>
User Name: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: internet + mms
Bearer: LTE
APN Type: internet + mms
I am having a problem with the latest version of the cm9 pics from and getting and sending moms. Help please
Change your mms proxy to....
Sent from the Black Star`d ICS GNote.
What about all of the other settings. It does not allow me to edit an existing APN but only allows me to create a new one.
Name:
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC: http ://mmsc.cingular. com
MMS port: 80
MCC: 310
MNC: 410
Authentication type:
APN type:
APN protocol: IPv4
Bearer: Unspecified
What should I enter on all of these or should I just leave them blank and use the settings that you showed me.
Here is what mine is at on Uniporn build 39:
Name: ATT
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS port: 80
MCC: 310
MNC: 410
Auth Type: Not set
APN type: default,supl,mms
APN Protocol: IPv4
So should I make a change under the Bearer selection
It gives me 3 choices.
LTE
eHRPD
Unspecified
Had to do a factory wipe on my kind-of-stock One S. Tried all APN settings on the SM website but had no mms or data and kept getting APN error notices. Spent an 2 hours on the phone 3 times with Simple Mobile tech support. They were worthless. Flamed them on FB and after 2 emails was sent the APN data below. Applied it and device works perfectly again. Interesting that the APN is accessing Cingular authentication severs...
APN Name: Straight Talk
APN: att.mvno
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
Save from Menu and select the new APN then power your phone off and on. Worked for me just fine. Hope it does for you!
alylea said:
Had to do a factory wipe on my kind-of-stock One S. Tried all APN settings on the SM website but had no mms or data and kept getting APN error notices. Spent an 2 hours on the phone 3 times with Simple Mobile tech support. They were worthless. Flamed them on FB and after 2 emails was sent the APN data below. Applied it and device works perfectly again. Interesting that the APN is accessing Cingular authentication severs...
APN Name: Straight Talk
APN: att.mvno
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
Save from Menu and select the new APN then power your phone off and on. Worked for me just fine. Hope it does for you!
Click to expand...
Click to collapse
Thanks for the settings. But I guess these settings also working:
Name: simple mobile apn
APN: simple
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: <Not set>
MMS Port: <Not set>
MCC: 310
MNC: 260
APN Type: default,supl,mms,admin