Related
I installed the Samsung USB drivers on my Win 7 64-bit laptop. I have ADB installed, and have used it for other devices, no problem. I can still use it to connect to my Color Nook.
I kill-server; start-server, and look for devices - nothing. But I can see the USB installer and those other few files on the phone, and I can see everything on the sdcard.
Any ideas? I'm going crazy here.
Do you have USB debugging on?
Sent from my SCH-I510 using XDA App
I had this problem as well.
First see if you have the "SAMSUNG usb driver" installed in control panel programs.
If not, take off usb debug and connect phone to computer. Then you should get a "install verizon software" option once you plug it in. Install software .. Then, enable "usb debuging" try it again, if that doesn't work .. remove verizon software, not usb drivers. This is basically what i did, and it started working
ok guys, here you go:
my phone doesn't make any ADB connections anymore with my mac.
points i already tested:
- reinstalled all the android dev tools
- flashed several rome on my sensation (tried: Beast rom, pyramid, arhd)
- reboot without fast boot
- usb debugging is active!
when i'm typing in terminal: "ADB devices" --> i get no devices.
where is the problem?
i already used adb while s-off my device, but now it won't work anymore.
just remember, i'm using a MAC, so i haven't got a pc!
yasinis said:
ok guys, here you go:
my phone doesn't make any ADB connections anymore with my mac.
points i already tested:
- reinstalled all the android dev tools
- flashed several rome on my sensation (tried: Beast rom, pyramid, arhd)
- reboot without fast boot
- usb debugging is active!
when i'm typing in terminal: "dab devices" --> i get no devices.
where is the problem?
i already used adb while s-off my device, but now it won't work anymore.
just remember, i'm using a MAC, so i haven't got a pc!
Click to expand...
Click to collapse
shouldnt it be adb devices instead of dab ?
I wanna try this ABD but there no link?!!
Shouldn't this ABC post be somewhere else?
you guys should quit cluttering this thread and help him figure this whole KFC thing out....
sheetmetalninja said:
you guys should quit cluttering this thread and help him figure this whole KFC thing out....
Click to expand...
Click to collapse
You're right.
But I also don't know anything about BAD or FASTBOOB or anything like that. I don't like reading. :[
yasinis said:
ok guys, here you go:
my phone doesn't make any ADB connections anymore with my mac.
points i already tested:
- reinstalled all the android dev tools
- flashed several rome on my sensation (tried: Beast rom, pyramid, arhd)
- reboot without fast boot
- usb debugging is active!
when i'm typing in terminal: "dab devices" --> i get no devices.
where is the problem?
i already used adb while s-off my device, but now it won't work anymore.
just remember, i'm using a MAC, so i haven't got a pc!
Click to expand...
Click to collapse
go into devmgmt.msc and see if your phone shows up under adb interfaces. if not, could be 1) bad usb cable, 2) bad usb port, 3) bad adb driver.
Check the drivers, you may need to update them
Sent from my Desire HD using XDA App
taney said:
go into devmgmt.msc and see if your phone shows up under adb interfaces. if not, could be 1) bad usb cable, 2) bad usb port, 3) bad adb driver.
Click to expand...
Click to collapse
how 2 do that? i mean what do you mean with devmgmt.msc(device management...?)
1) usb cable is good, the original one. also tried different usb cables, it doesn't matter.
2) usb port is also ok, other devices running out of the box (f.e. dvd drive oder dslr)
3) adb driver already updated via "Android SDK and AVD Manager".
i installed Android SDK tools, SDK Platform tools, sdk platform (--> is there sth. missing?)
Try disabling debugging on the phone, plug it in, reboot it, then enable debugging again
Romanbb said:
Try disabling debugging on the phone, plug it in, reboot it, then enable debugging again
Click to expand...
Click to collapse
no sorry...won't work..
getting the same:
Code:
adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
also tried without fastboot rebooting.
there are news guys:
just got an windows 7 personal computer for a couple of days.
installing the sdk and usb driver just worked fine.
why it doesn't work for mac?
already installed all new...
You may also check the cable you're using to connect the phone to your Mac. I was getting the same problem when trying to use the cable from my car charger - the phone was not even visible on the system list of USB devices. Using the cable that came with the phone did the trick.
(although if you used the same cable with Windows and it worked, my hint won't be of much help)
Do you got HTC sync installed on your PC?
TheStigx said:
Do you got HTC sync installed on your PC?
Click to expand...
Click to collapse
please remember - i'm using a MAC!
so finally i tested my device with several computers at the university.
i just found out, that the problem may been caused of my installed mac osx lion - but don't ask me why!
on the mac of my prof (also osx lion with latest updates) it worked out of the box...
--> so i'm gonna making backups now and will format my hard disk and reinstall lion again.
i'll give u feedback again ;-)
Have you closed the htc-sync application? solved the connection-error for me...
Maeffjus said:
Have you closed the htc-sync application? solved the connection-error for me...
Click to expand...
Click to collapse
again guys:
I'm using a MAC!
is there any official sync app for mac i don't know about??
ok guys,
just reinstalled my system an got the problem away..
i don't know why this was so, but i'm happy to make it work now.
yasinis said:
ok guys,
just reinstalled my system an got the problem away..
i don't know why this was so, but i'm happy to make it work now.
Click to expand...
Click to collapse
ok, just found out where the problem was caused. it was EasyTether!
this will help:
Code:
If you have installed EasyTether on OS X, the EasyTetherUSBEthernet.kext can prevent adb from communicating with your mobile device.
If you use Easy Tether, BEFORE you plug in your phone run:
sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext
(or unplug/plug your phone in after)
If you are done debugging and want to use EasyTether again, either restart or:
sudo kextload /System/Library/Extensions/EasyTetherUSBEthernet.kext
If you want to remove the EasyTether kext so it never hassels you again:
sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext
sudo rm -rf /System/Library/Extensions/EasyTetherUSBEthernet.kext
Is it possible to run ADB on the tablet with its dock? For example, to plug in my Galaxy Nexus to the tab and run commands like I would do on my PC.
Sent from my Transformer Pad infinity using xda premium
Use a terminal emulator - there's plenty in the Play Store
danger-rat said:
Use a terminal emulator - there's plenty in the Play Store
Click to expand...
Click to collapse
Ahh, didn't know I could do that. Thanks! Only error I'm getting is whenever I type "adb shell" it turns up with "error, device not found". What am I doing wrong? USB Debugging is enabled on the phone.
Sent from my Transformer Pad TF700T using xda premium
speedygonzo said:
Ahh, didn't know I could do that. Thanks! Only error I'm getting is whenever I type "adb shell" it turns up with "error, device not found". What am I doing wrong? USB Debugging is enabled on the phone.
Sent from my Transformer Pad TF700T using xda premium
Click to expand...
Click to collapse
Do you have sdk installed?
You don't need adb shell when you are working directly on the local device...
"adb shell" let's you connect to a remote device. When you work in a terminal emulator, you're working on the local device...
danger-rat said:
You don't need adb shell when you are working directly on the local device...
"adb shell" let's you connect to a remote device. When you work in a terminal emulator, you're working on the local device...
Click to expand...
Click to collapse
yeah my bad, did not read all the above, didn't know he's using terminal.
danger-rat said:
You don't need adb shell when you are working directly on the local device...
"adb shell" let's you connect to a remote device. When you work in a terminal emulator, you're working on the local device...
Click to expand...
Click to collapse
Oh, ok. I'm just so used to using it on my computer. Lol. Well I got it working! Thanks again!
Sent from my Transformer Pad TF700T using xda premium
ATTENTION: PUBLIC SERVICE ANNOUNCEMENT
It has come to my attention that under certain circumstances when the Kindle HD's get stuck in a bootloader bootloop the information on the "boot0" block of the internal storage can be ERASED and RESET.
This partition is special and contains ALL of your device's hardware specific information:
- Wifi MAC address + Encoded Secret for registering w/ Amazon services
- BT MAC address
- Serial #
etc
FOR BACKING UP THIS PARTITION:
Code:
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb pull /sdcard/boot0block.img
Place the "boot0block.img" file with the other files that you backed up in the original instructions for safe keeping.
FOR RESTORING THIS PARTITION:
(do not do this unless you are absolutely SURE that your boot0 block got wiped out -- hopefully you never need to)
This is done via adb from your PC while the device is in TWRP recovery or in the Android OS (not fastboot):
Code:
cd <your safekeeping files>
adb push boot0block /sdcard/boot0block.img
adb shell "echo 0 > /sys/block/mmcblk0boot0/force_ro; dd if=/sdcard/boot0block.img of=/dev/block/mmcblk0boot0;"
THIS FILE IS UNIQUE TO YOUR DEVICE AND CANNOT BE REPLACED OR REBUILT FROM ANOTHER DEVICE. DO NOT SHARE IT WITH ANYONE AS IT CONTAINS INFORMATION ABOUT YOUR DEVICE USED BY AMAZON DURING REGISTRATION.
very interesting Hashcode,thanks for the information :good:
Odd, I can't seem to find the file after I pulled it with ADB.
EDIT: I didn't even assign the command an output location to begin with. LOL.
Thanks for the info.
How can I access KFHD via ADB if CM10.1 installed.
I can't see my device in device manager only as a media storage or sth like that.
Should I remove KFHD adb driver and install the google driver?
Or just using the hidden trick in cm10.1?
"Enable Developer options in your phone (Settings > About phone and tap Build Number until you are a developer (about 7 times)
Set root access for APPS and ADB in: Settings > Developer Options > Root Access
Enable Android debugging at the same page (Developer Options). Enable ADB over network if you need.
Check if your Settings > Security > Unknown Sources is checked. you will need it to install over ADB."
Yeah...it helped
esox_hu said:
Thanks for the info.
How can I access KFHD via ADB if CM10.1 installed.
I can't see my device in device manager only as a media storage or sth like that.
Should I remove KFHD adb driver and install the google driver?
Or just using the hidden trick in cm10.1?
"Enable Developer options in your phone (Settings > About phone and tap Build Number until you are a developer (about 7 times)
Set root access for APPS and ADB in: Settings > Developer Options > Root Access
Enable Android debugging at the same page (Developer Options). Enable ADB over network if you need.
Check if your Settings > Security > Unknown Sources is checked. you will need it to install over ADB."
Yeah...it helped
Click to expand...
Click to collapse
Just turn on ADB debugging on the tablet, and plug it into the computer. On the computer, open command prompt, use the command "adb devices" to see if your ADB is working.
Other than that, I don't know what happened in your post.
Ok i really can't figure this one out, I used adb many times while testing KFFAide tool so I am 100% sure my adb drivers are installed correctly, But since i switched to cm10.1 (Thanks hashcode) ADB cannot recognize my device anymore, I have enabled ADB on my KFHD and when i connect it to my pc a small notification appears "Android debugging enabled" but when i use "adb devices" command nothing shows up!
Can anyone help me with this i'm completely lost here!
AmrBanawan said:
Ok i really can't figure this one out, I used adb many times while testing KFFAide tool so I am 100% sure my adb drivers are installed correctly, But since i switched to cm10.1 (Thanks hashcode) ADB cannot recognize my device anymore, I have enabled ADB on my KFHD and when i connect it to my pc a small notification appears "Android debugging enabled" but when i use "adb devices" command nothing shows up!
Can anyone help me with this i'm completely lost here!
Click to expand...
Click to collapse
Leave the device plugged in, go to Developer Setting and uncheck ADB debugging, then check it again. You should see a prompt, select OK for both.
seokhun said:
Leave the device plugged in, go to Developer Setting and uncheck ADB debugging, then check it again. You should see a prompt, select OK for both.
Click to expand...
Click to collapse
Ok thanks i tried but to no avail
AmrBanawan said:
Ok thanks i tried but to no avail
Click to expand...
Click to collapse
Yeah I actually have the same problem too now
Thanks for the heads up hash, got it on a usb stick now
---------- Post added at 11:41 PM ---------- Previous post was at 11:39 PM ----------
Protomartyr said:
Yeah I actually have the same problem too now
Click to expand...
Click to collapse
I had to manually check android debugging and usb debugging notify and it worked just fine.... make sure adb over network is not checked
Protomartyr said:
Yeah I actually have the same problem too now
Click to expand...
Click to collapse
AmrBanawan said:
Ok thanks i tried but to no avail
Click to expand...
Click to collapse
Why don't you guys try this, go into CMD while connected with the device (ADB debugging on), and type "adb devices" to start the daemon, then try the commands. Other than that, I don't know what else to do.
seokhun said:
Why don't you guys try this, go into CMD while connected with the device (ADB debugging on), and type "adb devices" to start the daemon, then try the commands. Other than that, I don't know what else to do.
Click to expand...
Click to collapse
Nope. Just get "List of Devices Attached" but no serial number. Checked device manager and it's showing up as a portable device. Probably will reinstall them and see if that solves it.
On a side note:
if we ran these commands in terminal emulator on the device, would that be sufficient?
Protomartyr said:
Nope. Just get "List of Devices Attached" but no serial number. Checked device manager and it's showing up as a portable device. Probably will reinstall them and see if that solves it.
On a side note:
if we ran these commands in terminal emulator on the device, would that be sufficient?
Click to expand...
Click to collapse
Yes
run the first command then pull it manually
But we need to know what's going on, i will need adb sometime soon when prokennexusa releases the next version of KFFAide
AmrBanawan said:
Yes
run the first command then pull it manually
But we need to know what's going on, i will need adb sometime soon when prokennexusa releases the next version of KFFAide
Click to expand...
Click to collapse
you can always open up your device manager and manually apply the adb drivers to your kindle
How do we know the boot0 partition is erased?
Sent from a Kindle Fire HD running CM10.1 using Tapatalk 2
had same probs on cm10 getting the files no matter what i tried.in windows 7 and xp it wouldnt install normal driver so i could see kindle as a drive so flashed an amazon zip and pc recognizes it without any problems and now have the files needed
dugoy13 said:
How do we know the boot0 partition is erased?
Sent from a Kindle Fire HD running CM10.1 using Tapatalk 2
Click to expand...
Click to collapse
Normally you would notice WiFi doesn't work under any circumstances same for BT. And when on Amazon's software it won't let you register.
Sent from my Amazon Kindle Fire HD using Tapatalk 2
I can't get ADB to find it either, think i'll revert back to stock to get the file then go back to CM - I notice though on CM turning USB Debugging on doesn't change anything in device manager, it still stays connected as a media device or camera, depending on which you have ticked in storage setting *shrugs*
Thank you Hashcode
PaulJCW said:
I can't get ADB to find it either, think i'll revert back to stock to get the file then go back to CM - I notice though on CM turning USB Debugging on doesn't change anything in device manager, it still stays connected as a media device or camera, depending on which you have ticked in storage setting *shrugs*
Thank you Hashcode
Click to expand...
Click to collapse
No don't, just type the command hashcode provided in terminal emulator and you'll find the backup in your sdcard, just copy it to your pc like normal!
You can do it from the terminal without typing ADB. that may be why people are confused. Start with hashcodes command but start with "su -c" in the terminal.
Sent from my Nexus S 4G using xda app-developers app
Just got a pixel 3a, it's running android 9. I want to unlock the bootloader. I'm following one of the popular root guides on this forum. I can't seem to get adb or fastboot to find my device.
Installed ADB applications from https://developer.android.com/studio/releases/platform-tools.html
Turned on developer options in phone, turned on USB debugging, plugged in phone.
Wasn't prompted for device authorization from phone.
Changed USB connection mode to PTP.
I have tried all USB connection modes, I verified the cable used to connect the pc to the pone is a data cable as I can transfer data when the phone usb mode is set to file transfer, ptp, or midiInstalled adb/phone device driver using https://developer.android.com/studio/run/win-usb
Still no debugging authorization prompt, but device manager lists the phone under 'Android Device' as 'Android Composite ADB Interface'.
'adb devices' doesn't list anything, tried 'adb kill-server', 'adb start-server', and 'adb usb'
'adb devices' doesn't list anything
reboot phone into fastboot by shutting down and holding power+volDown
'fastboot devices' doesn't list anything
Rebooted my pc, rebooted the phone, retried everything.
I'm at a loss, any suggestions?
Yea I've had some issues with adb/fastboot on windows as well. Sometimes it just won't detect the device, rebooting into my Linux install finds it instantly though. I haven't looked into how to fix it yet though as I can always just reboot to Linux. If you're on a version of windows that supports WSL, perhaps you should try that?
Sent from my Google Pixel 3a XL using XDA Labs