What software do you guys use to rip your dvd movies to install on your phones and why?
Here's a short list so far.
AnyDvD
DvD Fab
Handbrake
I'm looking for other suggestions to compare.
Handbrake doesnt actually rip. I use it for reencoding though. I use dvdfab
Sent from my SAMSUNG-SGH-I897 using XDA App
What? Handbrake does in fact rip DVDs. You just need to be running an on-the-fly decrypter like AnyDVD (recommended), DVD43, or DVDFab PassKey. The fact that it can be set up to encode that rip to proper Captivate specs in one step makes it the preferred way to do so in my book.
Personally, I rip through dvd::rip in linux with libdvdcss2 installed to get around copy-protection.
It is illegal to circumvent copy-protection in the United States though, so technically this method should only be done outside the US (where applicable, check your local laws) unless you don't mind the possible legal ramifications.
dvd::rip can be used as a standalone product WITHOUT libdvdcss2, but it will be unable to rip copy-protected DVD's, as you'd expect.
That's all good, but what software do you use to view this videos in captive.
Sent from my SAMSUNG-SGH-I897 using XDA App
Kaik541 said:
It is illegal to circumvent copy-protection in the United States though, so technically this method should only be done outside the US (where applicable, check your local laws) unless you don't mind the possible legal ramifications.
Click to expand...
Click to collapse
Oh, yes, thanks for the reminder. Everytime you rip a DVD, God kills a kitten. Please, think of the kittens
aksma said:
That's all good, but what software do you use to view this videos in captive.
Click to expand...
Click to collapse
If you are capable of ripping DVDs and putting the resultant file on the phone, you should be able to figure this one out yourself.
Personally I thought it was permissible to copy your own dvd to preserve and protect the original copy if you choose to.
What version of dvd fab do you use Max? I downloaded the trial version and it looks like you can only rip to mp2.
Shwiggie said:
What? Handbrake does in fact rip DVDs. You just need to be running an on-the-fly decrypter like AnyDVD (recommended), DVD43, or DVDFab PassKey. The fact that it can be set up to encode that rip to proper Captivate specs in one step makes it the preferred way to do so in my book.
Click to expand...
Click to collapse
What handbrake settings are you using? I just downloaded handbrake.
Short instructions for Windows users
If you are going to rip Bluray or any other HD medium you must first get AnyDVD HD it will counter any of the protection schemes that Bluray and HDDVD disks use as well as DVD. If all of your sources are DVD then AnyDVD will do. Of course for BR you must have a BR player installed in your computer.
You need the following tools, at the very least:
AnyDVD HD (Please buy this and don't torrent it, it is that good!)
RipBot264 (it is much faster than Handbrake at re-encoding)
VidCoder (requires Handbrake to be installed but is a better GUI for Windows users)
Simplistic instructions:
Place DVD/HDDVD/BR in drive
Allow ANYDVD HD to scan disk
Right click ANYDVD HD icon and select "Rip Video DVD to Harddisk"
Open VidCoder
Start with the Apple Universal profile and edit is as follows:
Picture > Max Width 800
Video Filters > Denoise Medium
Video > Average Bitrate (kbps) 1500
Audio > Target All, Codec AAC, Mixdown Stereo, Sample Rate 48, Bitrate 128
Make sure you change the Container and extension to .mp4 then Save As... and call it Captivate or any other meaningful name.
If you use those settings any HD (1080) source will likely end up being about 1-2 GB in total size. With the settings saved you can then select a video source, it can be anything that Handbrake supports from VOB to MT2S to MP4 to MKV files. Pick a Destination location and name and start encoding.
I have a Core i7 running at 3.5Ghz with 8GB RAM and a full length movie takes about 2x-3x the run length, so a 120 minute movie will take anywhere from 4 to 6 hours to encode, SD (DVD, 720p HDTV, SDTV) will encode much faster, sometimes even faster than 1x runtime.
You can also to the same with Ripbot264 with the added bonus that Ripbot can handle subtitles, but those instructions are for another day.
Shwiggie said:
Oh, yes, thanks for the reminder. Everytime you rip a DVD, God kills a kitten. Please, think of the kittens
Click to expand...
Click to collapse
I'm not saying it's an AWFUL thing to do, I'm just letting him know there are POTENTIAL legal ramifications.
Qmotion said:
Personally I thought it was permissible to copy your own dvd to preserve and protect the original copy if you choose to.
Click to expand...
Click to collapse
It is 100% legal to copy a DVD for this purpose IF you are not circumventing any sort of copy-protection mechanism on the disc. Let me quote wikipedia on this:
In the case where media contents are protected using some effective copy protection scheme, the Digital Millennium Copyright Act makes it illegal to manufacture or distribute circumvention tools and use those tools for non-fair use purposes. In the case RealNetworks v. DVD-CCA[2], the final injunction reads, "while it may well be fair use for an individual consumer to store a backup copy of a personally owned DVD on that individual's computer, a federal law has nonetheless made it illegal to manufacture or traffic in a device or tool that permits a consumer to make such copies."[3] This case made clear that manufacturing and distribution of circumvention tools was illegal, but fair use of those tools was not.
Source: http://en.wikipedia.org/wiki/Ripping#United_States
It's much like how jailbreaking and rooting has recently been made definitively legal through the DMCA, but the tools to do it and distributing those tools can still be illegal. So if you somehow manage to legally obtain the tools (which, there isn't an actual legal way to do so in the United States), you're right and this would be a 100% legal process. Fortunately, I doubt they'll actually chase you down for pulling the simple "libdvdcss2" file that's necessary (hell, I use it), but I'm just putting the information out there
WheresWaldo said:
If you are going to rip Bluray or any other HD medium you must first get AnyDVD HD it will counter any of the protection schemes that Bluray and HDDVD disks use as well as DVD. If all of your sources are DVD then AnyDVD will do. Of course for BR you must have a BR player installed in your computer.
You need the following tools, at the very least:
AnyDVD HD (Please buy this and don't torrent it, it is that good!)
RipBot264 (it is much faster than Handbrake at re-encoding)
VidCoder (requires Handbrake to be installed but is a better GUI for Windows users)
Simplistic instructions:
Place DVD/HDDVD/BR in drive
Allow ANYDVD HD to scan disk
Right click ANYDVD HD icon and select "Rip Video DVD to Harddisk"
Open VidCoder
Start with the Apple Universal profile and edit is as follows:
Picture > Max Width 800
Video Filters > Denoise Medium
Video > Average Bitrate (kbps) 1500
Audio > Target All, Codec AAC, Mixdown Stereo, Sample Rate 48, Bitrate 128
Make sure you change the Container and extension to .mp4 then Save As... and call it Captivate or any other meaningful name.
If you use those settings any HD (1080) source will likely end up being about 1-2 GB in total size. With the settings saved you can then select a video source, it can be anything that Handbrake supports from VOB to MT2S to MP4 to MKV files. Pick a Destination location and name and start encoding.
I have a Core i7 running at 3.5Ghz with 8GB RAM and a full length movie takes about 2x-3x the run length, so a 120 minute movie will take anywhere from 4 to 6 hours to encode, SD (DVD, 720p HDTV, SDTV) will encode much faster, sometimes even faster than 1x runtime.
You can also to the same with Ripbot264 with the added bonus that Ripbot can handle subtitles, but those instructions are for another day.
Click to expand...
Click to collapse
Great Stuff.
So you like AnyDvd better than DvD Fab?
Qmotion said:
Great Stuff.
So you like AnyDvd better than DvD Fab?
Click to expand...
Click to collapse
Yes
@Kaik541, Thank you so very much for the civics lesson, but it did not answer the question the OP asked. Nor did the OP state that he was illegally duping disks, you were presuming something you had no evidence to support.
I've been downloading movies for god knows how long. Now just reading your question and the replies so far made me want to reply.
Now my ans is none, no software what so ever, never used one and don't think I'll ever use on. If am burning a dvd then yes but to watch on my ph. or device, nope. Why? Because to me the best quickness and easiest way is to just down the rip version of the dvd. Now off course if u don't like downloading "copy protected" materials then I respect that, just gonna make ur task more time consuming. But for those of us that like our rip versions then this is the BEST WAY. u download ur movies, ANY format is perfectly find, that is. Avi,. Mpeg4,. Wmv,. Mkv etc. Now once you have your downloaded movies or ur rip movies that's it. Mission complete just drag the file to a video folder on ur SD card.
Here u go, u gonna need either rock player or yx player. Install any or both app. Both can play multiple video formats. Yx player plays ALL format including Mkv files.
Simple as that, no riping, converting or any thing like that. To me converting 1 movie is too much. The length of time it take one to rip or convert 1 movie equates to about 3-5 movies downloads for me using RapidShare.
Sent from my EVO using XDA App
I think you need a faster machine... i can rip a DVD in about 15 minutes. I don't think I download 8GB in that time.
As for others that are "Offended" by the civics lesson, it is point of fact, like it or not. I rip my own DVDs for viewing on my phone - and I consider it fair use. This is quite a bit different then downloading content you didn't pay for.
I use DVDFab and it works great. I make backup copies of my DVDs, then I create mobile formats when i need them. 300MB to 700MB per movie gives me a great picture - that even looks good if I play it back on a PC.
That's why I said it's not for every 1. It's def. Ly s matter of choice. I get about 6 movies in 10- 12 mins, (30 mbps down) so to me it's no biggie..
But u are rite, some like ripping their own movies, play the "fair game", all is well. Just give a different alternative.
Sent from my EVO using XDA App
I'm not quite sure why everyone is thinking I'm telling him not to do this, I even openly admitted to doing this very thing when I'm clearly from the United States where it's illegal. I also download movies for the same reason. And I'm sure more than half of us commenting here have downloaded movies that we don't even physically own just because we want to see them. (Streaming them on non-approved sites like hulu or netflix is essentially the same thing) But I honestly don't have a problem with this, I figured he should just be AWARE of the things you're suggesting to him.
I simply started my commenting as the fact that I use dvdrip which allows for a module known as libdvdcss2 to be loaded to circumvent copy protection. And that I use it.
Personally, I see no reason to transcode anything since our phones seem capable of taking just about any format you throw at it, unless you want to save space on the memory card.
I rent movies from Netflix. I don't always have time to watch them right away. I can be ripping them while I do other things and then watch them later on my phone if I'm away from home. I also have a large collection of movies that I've purchased. A couple of my favorites I wouldn't mind storing on my phone.
I just got the idea to install a movie on the phone to see how well it plays. I'm aware that the Vibrant came with Avatar. Too bad AT&T didn't think to give us something to show the video capabilities of the phone.
I also thought this might be an interesting post to make because I'm sure others might have interest in doing so. Many have never had a phone capable of viewing movies prior to owning a Captivate or simular device.
I think that anyone seeking advise from this thread won't be as concerened about any moral issues as much as just trying to learn what the best software that available to do the job. There are tons of software out there and it can be confusing trying to find what's best and how to use it.
If anyone knows of any other choices that works for them please feel free to add it and posibly explain how that particular software works.
Xilisoft suite works best for me, it's fast and easy, it's also one of the few that will actually max out all the cores in my cpu (i7-930),
others will use multiple cores, but my cpu graph shows that they won't max them out like xilisoft
Sent from my SAMSUNG-SGH-I897 using XDA App
Reason to transcode
The Captivate cannot play all HD content. If you are content with SD then you can rip your DVD's to MKV or MP4 but you are still transcoding from the multiple VOBs to a single file. If you are using HD sources like Bluray then you must transcode to lower the resolution. I cannot nor have I seen anyone able to play 1080p content directly on the Galaxy S phones, 720p can be played but why rip to 720p for your phone when it can't display it without reducing the size, nor can you play it with the TV out! Since you are transcoding anyway might as well make it fit the display size and code to a max width of 800 pixels.
Then you have file size issues, a BRD may have a movie in a single m2ts file or multiple m2ts files and most current movies exceed 20GB in size. DVD at a lower resolution can have main movies that uncompress to 4-8GB in size. How the heck are you going to fit them on a microSD card. If you say that your downloaded files aren't that big, it's because someone else transcoded it for you. I like to know what I am getting so personally I would rather transcode it myself, rather than let someone else make those choices for me. Since most of my movies are 1080p I have no other choice but to transcode. I do not want to carry around more than 2 or 3 movies at a time but I also carry about 8GB worth of music. Can't do both unless it is transcoded.
WheresWaldo said:
The Captivate cannot play all HD content. If you are content with SD then you can rip your DVD's to MKV or MP4 but you are still transcoding from the multiple VOBs to a single file. If you are using HD sources like Bluray then you must transcode to lower the resolution. I cannot nor have I seen anyone able to play 1080p content directly on the Galaxy S phones, 720p can be played but why rip to 720p for your phone when it can't display it without reducing the size, nor can you play it with the TV out! Since you are transcoding anyway might as well make it fit the display size and code to a max width of 800 pixels.
Then you have file size issues, a BRD may have a movie in a single m2ts file or multiple m2ts files and most current movies exceed 20GB in size. DVD at a lower resolution can have main movies that uncompress to 4-8GB in size. How the heck are you going to fit them on a microSD card. If you say that your downloaded files aren't that big, it's because someone else transcoded it for you. I like to know what I am getting so personally I would rather transcode it myself, rather than let someone else make those choices for me. Since most of my movies are 1080p I have no other choice but to transcode. I do not want to carry around more than 2 or 3 movies at a time but I also carry about 8GB worth of music. Can't do both unless it is transcoded.
Click to expand...
Click to collapse
Just to clarify, when trans-coding with Handbrake for Captivate (Blu Ray):
Picture: 800 x 480 (max)
Video: Codec can either be mpeg 4 (ffmpeg) or H.264 (x264) <---any difference?
Video: Bitrate (kbps) 1500 <---can you go higher (maybe 1800 or 2000) ?
Frame-rate FPS: 30
Audio:
-Codec AAC (faac)
-Mixdown: Stereo
-Sample-rate: 48
-Bitrate: 128
Is that about right? Did I miss anything?
P.S. I own all of my Videos that I trans-code, so there's no need for sacrificing Kittens....lol....
Credit goes to the original poster (you can download the APK files off xda website - I am a new member so I cannot post links in thread yet (just search under android app and development - hacking section if you want to locate the original thread):
I have reattached the APK files for convenience (v6 is for 2.0+, v3 is for anything below 2.0). You can also dl from the original thread if its still active.
Description:
Simple APK file and you are set - only works for swf files (not flv files - no conversion compatibilities/works poor on games). It works, but poor for file management, very little controls other than pausing (no picture resolution adjustments, controls to skip or fast forward rewind, speed controls, or playlist management), but the program parses .swf well and played well (it's just choppy) - it does not work like a shockwave player where you can play games and have interactive controls but it does display slideshows well.
I noticed speed of slideshow can sometimes increase or decrease depending on how/if the phone is rotated (personal observation). If anyone knows of a better program for android 2.1 and below (root or not - I use stock deox OC 710 mhz with good mem management and class 6 sd card apps2sd - large swap file and dalvik cache off sd), please let me know? I searched for over a yr and this was as close as I could find. I am happy to have found this but I am almost positive someone knows something or could improve on this even slightly?
Comments:
Per my understanding, there is currently no android port for this type of application, per my understanding and Adobe Flex/Air is still in the works for Android.
The best you could do with .swf files was to convert them either within the media player you used (there are none currently that do this, not now at least, if you know of one please share!!! - even those that claim to do it will not or will run into stability issues, or would be ridiculously expensive - some work on 2.2 I think), there used to be one which I used and it worked which was free in the android market way back in the day of 1.5/1.6 stock sense ui, but, whatever media player that was, it since has been removed from the marketplace or had the feature removed and I cannot find posts for it anywhere else on the web. I tested several players by the way on several settings, even ones for arm7 processors and even swapped roms to stable 2.2 cyanogen on cdma hero - this is sadly as good as it got for me?
The only way I was able to do this was to take the .swf file(s) and manually convert it on a PC (batch/or not) or to run it through the browser off my sd card, like dolphin (this is a pain and slow and there is no functional control).
It was thought to be impossible unless someone could port Gnash to android or some other open source swf player from a linux platform (android is more java than linux, I think? plus the arm6 processor limitations - this was considered unfeasible, you'd be better off programming a shockwave player from scratch than reverse engineer code, I think, even so, without Flex/open GL fixes, or some other mem management, it's not really worth the effort or risk).
Some company, apparently tried, and gave up because of this, I guess, but posted a feasible app for android which works - I think it could be improved on significantly - the dev has his email in the app about section - it just has limits and always defaults to the sd card directory when done vs. going back to folder where the swf files are located.
If anyone knows of a better program over this, again, please share (even paid vid player converter which can do playlists/sound/and/or even controls)! Otherwise, I am glad to share this with everyone - I have been looking "forever" for something like this - I just wish it had more controls or better file browsing/management. Maybe someone would want to work on this project?
Cheers,
Joe.
Hi Everyone,
I m kindly asking you to help me push MS into fixing the avi/xvid issue since conversion times are too long.
edit Several members have also raised concern that the Zune software transcodes videos where there is really no need!
ruscik said:
a 720p Family guy blue harvest in divx (my own copy) was converted to mp4 but resolution was not lowered.
A 720p family guy something dark side in mp4 was converted to mp4 but resolution was not lowered or audio adjusted.
Click to expand...
Click to collapse
I have created a post on the official MS support forums and the fellow users have supported the post but MS is trying not to give a proper answer on the issues unless people reply enough or click the "I would like an answer too" button. The post seems to be ending up unanswered and pushed back. I need to let the post grab MS attention!
I would like MS to escalate the issue internally but I need more input! So please be so kind!
I suggest that we could do this for other issues as well!!!
Their forum relies on Live IDs so it is just about entering your username. (Doesn't take long)
http://social.answers.microsoft.com...7/thread/b71af2ac-9f72-4b10-a5ee-eaa29c1933e7
It can be fixed quite easily.
1) Write down the spec of your computer on a piece of paper.
2) Go to your local PC shop
3) Hand them the piece of paper and ask for something faster at encoding video
4) Happiness
Yep. Crap computers suck at transcoding video. Even a better graphics card would work much better, since lots of GPUs these days can offload much of the conversion.
Some notebooks were sold without multi-core processors (but are still 64-bit, some people assume 64-bit = multi-core), and lots of consumers have things like mismatched ram sticks and the like that can reduce their computer performance for these types of tasks.
Thanks a lot guys!!!! Appreciated!
It looks like they are still ignoring the issue. I think I might try to upvote the thread tomorrow again.
My general issue is that I am accessing different PCs all the time. Let it be work, uni, friends, or my home laptop. So I generally just need a fast way to get stuff onto the device.
Maybe we get lucky and they enable it again
I personally don't think this issue should have a high priority, as Zune software reencode your file on the fly.
Even at Microsoft, ressources are limited, and there are lots a other stuff I would like first (custom ringtones, multitask, silverlight and flash on the browser...)
My 2 cents.
(nico) said:
Even at Microsoft, ressources are limited,
Click to expand...
Click to collapse
The issue here is that it works on the Zune HD without re encoding or demuxing and the same applied to the wp7 emulator until they decided to take the feature out...
Maybe it will be a OEM specific feature?!
Name one reason for DivX /XviD support, except that you want to play your pirated movies...
Transcoding XviD shouldn't take much time with a modern computer.
Why do they have to be pirated? There are those of us who have huge DVD/BD libraries ripped to xvid (and later on MKV). Personally I have several hundred DVDs that I have painstakingly converted to xvid for digital storage and easy access from my HTPCs.
Sir. Haxalot said:
Name one reason for DivX /XviD support, except that you want to play your pirated movies...
Transcoding XviD shouldn't take much time with a modern computer.
Click to expand...
Click to collapse
You could make the same assumption about mp3s. I started ripping in 99.. I don't have the resources to rerip my music into something better now. And in a real case scenario I don't want to be told 2 years from now that an MP3 player doesn't play mp3s anymore because they are "all" considered to be pirated .....
I have pleny of DVD's/BD that on top of normal movie have a digital copy that can be used with portable players. They come in many formats on those discs and all require to enter a code before 1st play so it can check if it is valid copy.
I do that and then can play them on my PC even via Zune. Formats I have are WMV, AVI, MP4 and DIVX.
My death race in wmv that works on windows 7 fresh install (with no extra codes and net access) is converted by zune. Annoying as zune officially supports WMV and even plays that movie.
Two mp4 movies (Mummy and Mummy 2) from the same Box set one just copies and works one is converted from mp4 to mp4. Some Divx movies are "converted" but it lasts 1 to 2 min aka it only changes extension while some are properly reconverted but resolution or quality are the same afterwards (720p or standard resolution no matter). There is a problem there.
So, some of the videos I want to put on my phone are over 4 gigs. I want to put them on my phone, and it's Fat32, so 4 gigs won't cut it. I figure if I downsample it a bit, it'll fit, not to mention my phone's resolution isn't huge.
So... is it possible?
There is a program out there can't remember the name that will take your video and resize it for your phone. Will let you know when I remember the name.
Sure you can
I use this app (SUPER) for the task, but maybe it requires some knowledge
google for: erightsoft super
and click the first post
give ir a try, you can find info about its options by googling, or ask if you like.
I use free video converter, just google it and you'll get a link. But it's free and converts any video file.
i just remember there is another tool for this, really easy to use, almost 1 click
search for: PocketDivXEncoder
its kind of old, but it does the job
You could try Badaboom if you have an nVidia GPU that supports CUDA, or for the ATi side, Avivo Video Converter, both of them allow quick transcoding speed using the GPU, which is pretty useful if your CPU is dated, in which most video transcoding software use.
Hi guys,
Just a quick question, hoping someone might know the answer?
Is there a max file size for a video to be synced to the phone using Zune.
I spent aaages last night ripping my Avatar DVD, and converting it to the correct format - i was hoping to have it at a decent quality, so the file ended up being 2.7GB, however it wont complete the Sync, it gets to around 80% maybe a little more but then fails saying the phone isn't responding... There is 3.6GB free on the phone so it isn't running low on space.
I've not got a problem syncing usually, and smaller video files sync fine with no issues - if there isn't a file size limitation, does anyone have any idea how to fix this?
Or maybe even some suggestions for software that would be able to split the video file into smaller parts?
Cheers
Paul
I've never run into problems syncing however I've nice synced a movie that damn big. Lol.
Sent from my SGH-i917 using XDA Windows Phone 7 App
Hi guys,
I've managed to split the file using a tool called Super This is a really great Tool for free.
Oh and Avatar looks incredible on the Omnia 7, ripped from the DVD following This Guide.
It took a few Hours altogether, but was really worth it.
This thread can be closed i Guess!
Cheers
Paul
what programs did you use to rip the movie?
I can find 100 programs online which convert each VOB file into a separate wmv file. I want of course a single movie.
I tried DVDFab but it has problems syncing the audio and video
Follow this great guide Here
It seems a little long winded but the results are Fantastic. On average from inserting the DVD and having the final file ready to transfer to your phone takes around 2-3 hours. Video ripping / conversion is really processor intensive stuff.
Once you have the final file ready to transfer - you may find it too large to transfer as i did, so use the Super tool to split the file - Here
Enjoy!