My replacement phone came with Froyo already on it. Rooted using 1-click, but when I try to install CWM I get the not signed error. What's the easiest way to get CWM working so I can flash Cog 4 or Andromeda (probably Andromeda)? I looked at the 3e thread, but as I have no apps installed yet I have no Root Explorer or TiBU to be able to follow those directions. Should I 1-click Odin back to JF6? Is that even working on 2.2?
Miami_Son said:
My replacement phone came with Froyo already on it. Rooted using 1-click, but when I try to install CWM I get the not signed error. What's the easiest way to get CWM working so I can flash Cog 4 or Andromeda (probably Andromeda)? I looked at the 3e thread, but as I have no apps installed yet I have no Root Explorer or TiBU to be able to follow those directions. Should I 1-click Odin back to JF6? Is that even working on 2.2?
Click to expand...
Click to collapse
On the vibrant forums you can find a cwm for 3e recovery.
Miami_Son said:
My replacement phone came with Froyo already on it. Rooted using 1-click, but when I try to install CWM I get the not signed error. What's the easiest way to get CWM working so I can flash Cog 4 or Andromeda (probably Andromeda)? I looked at the 3e thread, but as I have no apps installed yet I have no Root Explorer or TiBU to be able to follow those directions. Should I 1-click Odin back to JF6? Is that even working on 2.2?
Click to expand...
Click to collapse
You got it. One-click, wipe, root, install CWM, flash to Cog/Andromeda/Serendipity.
That's impressive that they shipped you one with 2.2 already. I guess when it rains it pours!
2.2
for x-mas i got a refurbished captivate and i checked the firmware and im pretty sure it was at 2.2. but i have a rom on now and its still at 2.2 but tht could be the rom. so idk
OK, ran Odin 1-click and it failed twice. Now what?
Miami_Son said:
My replacement phone came with Froyo already on it. Rooted using 1-click, but when I try to install CWM I get the not signed error. What's the easiest way to get CWM working so I can flash Cog 4 or Andromeda (probably Andromeda)? I looked at the 3e thread, but as I have no apps installed yet I have no Root Explorer or TiBU to be able to follow those directions. Should I 1-click Odin back to JF6? Is that even working on 2.2?
Click to expand...
Click to collapse
Just out of curiosity, when did they process your replacement? My replacement is showing up tomorrow, so it'll be interesting to see if I get Froyo, too.
Thx
rileyh1278 said:
Just out of curiosity, when did they process your replacement? My replacement is showing up tomorrow, so it'll be interesting to see if I get Froyo, too.
Thx
Click to expand...
Click to collapse
The packing slip says it went out on 2/21. It is a 1008 build.
[RECOVERY] 3e Recovery Modded w/ No Verification
Miami_Son said:
OK, ran Odin 1-click and it failed twice. Now what?
Click to expand...
Click to collapse
Is Odin recognizing the phone when it's connected? Also, do you have USB debugging turned on and is the internal SD unmounted? I flashed mine to the Samsung/AT&T 2.2 and was able to use Odin to get back to stock, so I know it ought to work.
Miami_Son said:
OK, ran Odin 1-click and it failed twice. Now what?
Click to expand...
Click to collapse
Are you starting Odin as administrator before plugging in the phone then plugging in the powered off phone with the volume buttons pressed?
ajh5408 said:
Is Odin recognizing the phone when it's connected? Also, do you have USB debugging turned on and is the internal SD unmounted? I flashed mine to the Samsung/AT&T 2.2 and was able to use Odin to get back to stock, so I know it ought to work.
Click to expand...
Click to collapse
Unless you are talking about the master clear function, none of that stuff matters.
ajh5408 said:
Is Odin recognizing the phone when it's connected? Also, do you have USB debugging turned on and is the internal SD unmounted? I flashed mine to the Samsung/AT&T 2.2 and was able to use Odin to get back to stock, so I know it ought to work.
Click to expand...
Click to collapse
Yes, yes and yes. I'm trying to root the phone and 1-click root doesn't work either. Guess I have to try Z4root and see if that works. Thank you, AT$T!
OK, here's where I'm at. Got 3e done. Got rooted. Got CWM installed. When I go into CWM recovery I get a green menu instead of the familiar red. When I select zip from sd card and then click on yes to install the ROM, I get an error saying "can't mount SDCARD, installation aborted." What now? Should I try Odin again?
Miami_Son said:
OK, here's where I'm at. Got 3e done. Got rooted. Got CWM installed. When I go into CWM recovery I get a green menu instead of the familiar red. When I select zip from sd card and then click on yes to install the ROM, I get an error saying "can't mount SDCARD, installation aborted." What now? Should I try Odin again?
Click to expand...
Click to collapse
Are you trying to load the zip from your external sd? I know dumb question just trying to help.
zelendel said:
Are you trying to load the zip from your external sd? I know dumb question just trying to help.
Click to expand...
Click to collapse
No dumb questions at this point. I have the zip on the internal SD card. I don't have the external installed at this point. Just tried Odin3 again, just sitting at "analyzing files..." Can't believe how freaking complicated this has gotten compared to my other Cappy. Why did they send this with 2.2 on it? Uggggghhhh!
Miami_Son said:
No dumb questions at this point. I have the zip on the internal SD card. I don't have the external installed at this point. Just tried Odin3 again, just sitting at "analyzing files..." Can't believe how freaking complicated this has gotten compared to my other Cappy. Why did they send this with 2.2 on it? Uggggghhhh!
Click to expand...
Click to collapse
Try the new AIO tool, might work better since he abandoned Odin.
ryude said:
Try the new AIO tool, might work better since he abandoned Odin.
Click to expand...
Click to collapse
I downloaded it, I think. Is it Captivate_SGS_Tools_45.apk?
I used SuperOneClickRoot to root my phone and then used 3eRecoveryInstaller that I found on here that someone put together using Vibrant fix to remove the signature check and the wipe when installing and update.zip. Haven't flashed clockwork yet to see if it works because I dont' have time to reflash if it fails because I have to work tonight.
Dnorwood said:
I used SuperOneClickRoot to root my phone and then used 3eRecoveryInstaller that I found on here that someone put together using Vibrant fix to remove the signature check and the wipe when installing and update.zip. Haven't flashed clockwork yet to see if it works because I dont' have time to reflash if it fails because I have to work tonight.
Click to expand...
Click to collapse
I'm past all that, but thnks. Downloading a ROM using AIO's SGS Tools right now. Fingers crossed!
Miami_Son said:
I'm past all that, but thnks. Downloading a ROM using AIO's SGS Tools right now. Fingers crossed!
Click to expand...
Click to collapse
It's not an app... You can't install ROMs using that app unless you have CWM installed (and working).
I'm talking about bay_wolf's AIO tool in the android development forum. It's the very first post.
Related
Looking for the stock AT&T update.zip file. I did search, but now luck. Thanks.
http://forum.xda-developers.com/showthread.php?t=731989
I just need the update.zip file. Thanks anyway.
No problem. That was the closest thing I could find. Best of luck with whatever you are doing.
Are you talking about the update.zip file to root your device? I have that.
No, the stock update.zip file. I am running stock and tried to run the restore and it said the file is missing. I was going to put it back on and try and run it again. I've been having trouble powering on. I can only power on if I have it plugged up.
AT&T is sending me a new phone, but I just wanted to try and restore it for giggles and also to make sure my data is gone.
??
there isnt a stock update.zip........
The phone says that update.zip cannot be found on the sd card when I try to restore. I'm running stock on it. It may be that its just fried. Once it boots up it seems to run ok. I just got the new one from AT&T and going to send the old one in in the morn. Just wanted to try one last fix because everything worked great the past few days, even the gps was working better. I guess I will see how the new one does.
sclRanger said:
The phone says that update.zip cannot be found on the sd card when I try to restore. I'm running stock on it. It may be that its just fried. Once it boots up it seems to run ok. I just got the new one from AT&T and going to send the old one in in the morn. Just wanted to try one last fix because everything worked great the past few days, even the gps was working better. I guess I will see how the new one does.
Click to expand...
Click to collapse
i dont think anyone here has any idea what you are talking about.
the stock phone doesnt have an update.zip on it. reinstall packages in system recovery doesnt mean it reinstalls stuff you removed from the OS. it allows you to flash zip files created for things like clockwork mod recovery and rooting on the 2.1....
sclRanger said:
The phone says that update.zip cannot be found on the sd card when I try to restore. I'm running stock on it. It may be that its just fried. Once it boots up it seems to run ok. I just got the new one from AT&T and going to send the old one in in the morn. Just wanted to try one last fix because everything worked great the past few days, even the gps was working better. I guess I will see how the new one does.
Click to expand...
Click to collapse
There is no update.zip for stock firmware. Reinstall package in recovery mode is for flashing ROM updates and other stuff. If you delete something from stock ROM or messed up, there is no way to get it back or restore other than flash the stock ROM via ODIN3 and load stock firmware file.
Actuallu dg posted one... Unfort I dont have the link
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
Actuallu dg posted one... Unfort I dont have the link
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
DG posted OneClick ODIN flash to stock. It is not an update.zip OP would like to have.
foxbat121 said:
DG posted OneClick ODIN flash to stock. It is not an update.zip OP would like to have.
Click to expand...
Click to collapse
....... No the .zip like the OP was requesting... If my sig shows up you can find it in the link
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
....... No the .zip like the OP was requesting... If my sig shows up you can find it in the link
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I think you're confused with the JH7 update.zip that DG releases. It is not a recovery package zip OP like to have. You have to install CWM in order to flash this zip file.
What the OP doesn't exist. For the Captivate there are two options unless a developer creates another one:
1)Odin One click to I897UCJF6
2)ZIP of th I897UCJH7 firmware
/thread
I would advise you use the ODIN 1 Click to resolve any issue your having. I made a video on how to do this in my video archive thread...
http://forum.xda-developers.com/showthread.php?t=877652
Can anyone help please? I was running stock ED1 and decided to update to EE4. I put Voodoo lagfix on, then flashed the EE4 update that was in the general forum through recovery as an update.zip. It stopped about halfway through for some reason, leaving me with an "unknown" baseband and thus, no way to get a signal. All attempts to flash different radio updates failed. So, I decided to flash everything over. I flashed the stock ED1 through Odin, but it keeps saying the MD5 checksum is invalid, so I flashed Altered Beast. This got me clockword mod, but still no baseband. Finally, I tried to flashed debloated EE4 through clockword and now, I'm stuck at the Samsung screen, with no way to get into recovery. Any suggestions for my noobness? :/ I can still get it to connect to Odin.
Ok, quick update. I got Altered Beast reflashed. CWM is still on there. I'd like to get back to stock, ED1, ED2, EE4; I don't care which, as long as I have a working baseband. Suggestions?
try redownlolading ed1 because the md5 has to do with the file itself not the phone. Then connect to wifi and update to ed2. after, try flashing the update .zip thats from the forums while you are stock, no custom recovery or anything other than root ed2. if none of this works, then you probably burnt out your sim card like i did accidentaly by activating my old droid x. so if you did burn the sim card, go to best buy or verizon or the costco wireless booth and have them activate a new sim card for you. this happened to me where i couldnt get data or anything and i got a new sim card and pow! it worked. try my initial instructions first. and make sure you are using the PDA button in odin
empyreandance said:
Ok, quick update. I got Altered Beast reflashed. CWM is still on there. I'd like to get back to stock, ED1, ED2, EE4; I don't care which, as long as I have a working baseband. Suggestions?
Click to expand...
Click to collapse
whenever you flash an update you need to be completely stock thats including the kernel
i would disable lag fix then flash ED1 downgrade and try to update if it doesnt let you i would unroot and bring your phone into VZW tell them the update failed and left you with unknown baseband.
you may be a good test subject to try out his idea on flashing a radio , if he is there yet
also you posted in the wrong section
rami98 said:
try redownlolading ed1 because the md5 has to do with the file itself not the phone. Then connect to wifi and update to ed2. after, try flashing the update .zip thats from the forums while you are stock, no custom recovery or anything other than root ed2. if none of this works, then you probably burnt out your sim card like i did accidentaly by activating my old droid x. so if you did burn the sim card, go to best buy or verizon or the costco wireless booth and have them activate a new sim card for you. this happened to me where i couldnt get data or anything and i got a new sim card and pow! it worked. try my initial instructions first. and make sure you are using the PDA button in odin
Click to expand...
Click to collapse
you cant get the update over wifi im pretty sure he will need to download the update.zip files for each update if he doesnt already have them
Hah im trying to figure out how to get outta bootloop forgot to disable voodoo odin'd back to ed2 w/root and now i have bootloop..
Sent from my SGH-I897 using XDA App
Ok, I'm still getting a MD5 mismatch on the third try with the stock ED1 file. any other ideas?
mv1luv said:
Hah im trying to figure out how to get outta bootloop forgot to disable voodoo odin'd back to ed2 w/root and now i have bootloop..
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
flash altered beast, then boot up , boot into recovery disable lagfix then try again
empyreandance said:
Ok, I'm still getting a MD5 mismatch on the third try with the stock ED1 file. any other ideas?
Click to expand...
Click to collapse
redownload the file
i've done that three times today. i think something else is going on
I would suggest reinstalling the Samsung drivers for the Charge, then open Odin, use a different USB port and try again. I had a lot of issues with flash ED1 and one of the ways I found worked around this (for me) was to make sure the drivers were messed up.
empyreandance said:
i've done that three times today. i think something else is going on
Click to expand...
Click to collapse
where are you downloading the file from?
RaptorMD said:
I would suggest reinstalling the Samsung drivers for the Charge, then open Odin, use a different USB port and try again. I had a lot of issues with flash ED1 and one of the ways I found worked around this (for me) was to make sure the drivers were messed up.
Click to expand...
Click to collapse
MD5 mismatch happens when a file is corrupt or not fully complete
ok, good news (sort of). the md5 mismatch was being caused by the way chrome was naming the multiple instances of the download. I renamed the file and got back to stock ED1. still no signal, but i got the pop up saying i had a system update waiting, i just have to wait for the battery to charge a bit. I'll check back in soon. in the meantime, thanks for all the help and patience everyone.
ok, installing the update didn't help. is it possible my sim card is fried?
empyreandance said:
I put Voodoo lagfix on, then flashed the EE4 update
Click to expand...
Click to collapse
wait i thought if you wanted to flash to stock you want the Voodoo lagfix off? i think your problem might be that your flashing non voodoo kernals to a system that has voodoo on i dont think you should do that, try flashing a voodoo kernal maybe instead of the stock stuff
Sent from my Transformer TF101 using Tapatalk
well, a trip to verizon and trying new sim cards didn't fix it. guess i'll need to wait for a replacement.
My wife's GS4G connects to the computer but only charges. The phone does not recognized that it's plugged in to the computer, and the computer doesnt acknowledge the device either. I doubt I have a driver issue because the computer would at least tell me that it couldnt find them. The phone only charges when it's connected. I want to know if there's a way to root the phone without using the computer. I could then use wireless adb after that I guess. I looked at this one tutorial but I couldnt flash any Rooting Zips from the bootloader because my bootloader is version e3 (?) and I guess you need e2. Is there a workaround for this or am I forever doomed?
Assuming you're on Froyo, download the update.zip from this post:
http://forum.xda-developers.com/showthread.php?t=1099374
That will get you CWM.
Download the Bali kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=1080871
Once you put it on your sd card and use the update.zip from the first post to get into cwm, flash the new kernel since it's got a newer version of CWM + root. You'll be able to tinker with your phone after that. Note that you will only have support for Froyo CWM roms after that so don't try flashing any Gingerbread CWM roms until you manage to get your computer to recognize it.
Great! Now what's restricting the ROM flashing to Froyo only? I've talked to a few people that think the usb port on the phone is broken. I've gotten no other explanations. It doesn't look like I'll be getting it connected at all.
damastah said:
Great! Now what's restricting the ROM flashing to Froyo only? I've talked to a few people that think the usb port on the phone is broken. I've gotten no other explanations. It doesn't look like I'll be getting it connected at all.
Click to expand...
Click to collapse
To upgrade to Gingerbread you need to install a new bootloader that is only installable via samsung kies or via odin/hemidall. All of which require you to be hooked to a computer.
eollie said:
To upgrade to Gingerbread you need to install a new bootloader that is only installable via samsung kies or via odin/hemidall. All of which require you to be hooked to a computer.
Click to expand...
Click to collapse
What eollie said is true. We've tried experimenting with flashing bootloaders via CWM, but that just wound up bricking phones, so you WILL need a computer to get on Gingerbread.
Maybe you can try to get a phone repair company to fix your USB port for you once you verify that it IS broken.
FBis251 said:
Assuming you're on Froyo, download the update.zip from this post:
http://forum.xda-developers.com/showthread.php?t=1099374
That will get you CWM.
Download the Bali kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=1080871
Once you put it on your sd card and use the update.zip from the first post to get into cwm, flash the new kernel since it's got a newer version of CWM + root. You'll be able to tinker with your phone after that. Note that you will only have support for Froyo CWM roms after that so don't try flashing any Gingerbread CWM roms until you manage to get your computer to recognize it.
Click to expand...
Click to collapse
cwm recovery didnt work. esignature verification failed or something like that.
What colors were the letters when it said signature verification failed?
Sent from my SGH-T959V using XDA App
FBis251 said:
What colors were the letters when it said signature verification failed?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Red
Sent from my computer using Google Chrome
damastah said:
Red
Sent from my computer using Google Chrome
Click to expand...
Click to collapse
And you got that after trying to flash bali?
Once you put it on your sd card and use the update.zip from the first post to get into cwm, flash the new kernel since it's got a newer version of CWM + root. You'll be able to tinker with your phone after that.
Click to expand...
Click to collapse
No, you said flash cwm first... I couldnt do that so I didnt want to continue. Didn't want to risk bricking her phone.
damastah said:
No, you said flash cwm first... I couldnt do that so I didnt want to continue. Didn't want to risk bricking her phone.
Click to expand...
Click to collapse
"use the update.zip to get into cwm" The update.zip file will get you yellow cwm. Don't worry it won't brick her phone if you're on Froyo and you have the SGH-T959V. The bali kernel won't work unless you flash it from the yellow CWM. If the screen you're trying to flash from has mostly blue letters, you're in samsung recovery which will only let you flash the update.zip to get yellow CWM.
Ok, This is what I did. I downloaded the second linked file from the thread you linked. It was an update.zip. I booted into the screen with the mostly blue letters,
did you select install update zip bro?
yeah. Thats how I got to what you see in the second image
Since your phone is probably not rooted you'll need to use this exploit to get it rooted directly from the phone:
http://kimete.com/z4root.html
Skip steps 1 through 4 since you're gonna download the apk directly to your phone.
Yeah, the phone's not rooted. I'll try that.
How long does z4root take to run? It just spins and spins for me...
damastah said:
How long does z4root take to run? It just spins and spins for me...
Click to expand...
Click to collapse
Hmm, it took less than 2 mins in the description video I watched.
damastah said:
Ok, This is what I did. I downloaded the second linked file from the thread you linked. It was an update.zip. I booted into the screen with the mostly blue letters,
Click to expand...
Click to collapse
Is the name of the update.zip actually "update.zip" if it isn't then the recovery isn't going to recognize it.
It was named update.zip... and z4root didn't work for the phone... it crashes at the end
Okay, So I just rooted and unlocked the bootloader on my Verizon Galaxy S III and tried to flash Cyanogenmod 10 (the latest on on rom manager) and its now stuck on the boot animation. I created a backup before I did this through rommanager but when I try to utilize it, it says the file is empty. HELP PLEASE!! :crying:
Rom Manager strikes again. lol Odin back to stock and start over.
jljones06 said:
Okay, So I just rooted and unlocked the bootloader on my Verizon Galaxy S III and tried to flash Cyanogenmod 10 (the latest on on rom manager) and its now stuck on the boot animation. I created a backup before I did this through rommanager but when I try to utilize it, it says the file is empty. HELP PLEASE!! :crying:
Click to expand...
Click to collapse
I have used it a couple of years ago on my galaxy s fascinate but i forgot how to use odin. Any download links and tutorials you know of? Thanks again
Pulled link from other noob. Yall on a roll today. LOL
http://forum.xda-developers.com/showthread.php?t=1762709
If everything you need not in that section read the rest of Droidstyle's thread.
prdog1 said:
Pulled link from other noob. Yall on a roll today. LOL
http://forum.xda-developers.com/showthread.php?t=1762709
If everything you need not in that section read the rest of Droidstyle's thread.
Click to expand...
Click to collapse
What's wrong with RomManager? Screwing everything up.
Anayalata said:
What's wrong with RomManager? Screwing everything up.
Click to expand...
Click to collapse
You should always be sure to check the total size of the backup file before continuing with low level flashing. With the SGS III CWM has been notorious for not working properly with recovery processes. I switched over to TWRP after my dilemma with CWM.
So yeah, ODIN back to stock and start over.
Be thankful you only have a bootloop and not a total brick.
tekrhino said:
You should always be sure to check the total size of the backup file before continuing with low level flashing. With the SGS III CWM has been notorious for not working properly with recovery processes. I switched over to TWRP after my dilemma with CWM.
So yeah, ODIN back to stock and start over.
Be thankful you only have a bootloop and not a total brick.
Click to expand...
Click to collapse
Well I ended up reflashing the stock rom last night then tried to unlock bootloader again and when I started the ez unlock app it said my phone didnt have root access. So I rooted again the same way I did the first time and now when I try to launch the app it just sits there with a white screen. So then I downloaded a rootchecker app from the market and it says I dont have root access which is probably why the EZ_Unlock app isnt working properly. Thoughts?
jljones06 said:
Well I ended up reflashing the stock rom last night then tried to unlock bootloader again and when I started the ez unlock app it said my phone didnt have root access. So I rooted again the same way I did the first time and now when I try to launch the app it just sits there with a white screen. So then I downloaded a rootchecker app from the market and it says I dont have root access which is probably why the EZ_Unlock app isnt working properly. Thoughts?
Click to expand...
Click to collapse
Open up superuser and update the binaries
Sent from my S3 running Eclipse 2.1
kintwofan said:
Open up superuser and update the binaries
Sent from my S3 running Eclipse 2.1
Click to expand...
Click to collapse
That worked! So now that I've pretty much back to step one, is there anything I should watch out for while trying to flash another ROM? Maybe any ROM suggestions? Thanks
Just flash the ROM yourself in recovery, don't count on RM.
apacseven said:
Just flash the ROM yourself in recovery, don't count on RM.
Click to expand...
Click to collapse
Ill for sure keep that in mind.
Once you get on CM10 their built in updater works pretty well. I haven't heard anyone complain except for the fact it doesn't do an autobackup for you, it just dirty flashes it.
Hello everyone,
It's my first time witnessing this issue, I do have a Samsung Galaxy S 4G. So I decided to upgraded Eclairs to Gingerbread. Which I did.
Somehow I downloaded the CM7 ROM in the SGS 4G section, I have flashed it and now everytime I click "reboot system now", it's just putting me back to CWM Recovery over and over again. Now I got tired of it, so I tried flashing the SlimBean in hopes of making my device work the way they should, but it's the same result. When I cleared data, flashed the ROM and Gapps and when I click "reboot system now", It shows the boot screen but then it transferred me back to recovery. I don't really know what to do.
Urgent help needed. Thank you all.
can you acess into download mode?
PuNeTZzZ said:
can you acess into download mode?
Click to expand...
Click to collapse
Yes I can, also tried it with CM9, same results it shows recovery everytime. I need some help. :crying:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
You are missing the boot loader if you went straight to Gingerbread. Use Heimdall One Click to flash to Gingerbread. Also click on the bootloader option as well when you flash.
Sent from my SGH-T959V using xda premium
Theraze said:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
Click to expand...
Click to collapse
Can you give me the names of the GB one-click?
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
champ1919 said:
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
Click to expand...
Click to collapse
Can anyone tell me this guide works on starting from a CM7 Rom. I don't get it at all. Since it started from Stock Froyo.