Related
I installed Access Netfront to my XDA a while ago but, due to lack of memory, had to uninstall it. I now have a 1GB memory card. I tried to install Access Netfront today using Active Sync. I thought I installed the programme to my memory card as I had selected,but, after switching off and switching on my XDA sometime later, I found that Netfront was not installed and my memory card was blank. I had actually watched the memory go up on my memory card earlier so assumed that the programme had installed to it.
I know the memory card works as I copied files to it.
Please can someone advise me how to install software to a memory card.
Thank you.
Gill said:
I installed Access Netfront to my XDA a while ago but, due to lack of memory, had to uninstall it. I now have a 1GB memory card. I tried to install Access Netfront today using Active Sync. I thought I installed the programme to my memory card as I had selected,but, after switching off and switching on my XDA sometime later, I found that Netfront was not installed and my memory card was blank. I had actually watched the memory go up on my memory card earlier so assumed that the programme had installed to it.
I know the memory card works as I copied files to it.
Please can someone advise me how to install software to a memory card.
Thank you.
Click to expand...
Click to collapse
Its because the registry still points your previous installation to your Device. A hard Reset and a Fresh reinstall shall solve the problems
Cheers !!
Hello
Anyone got the SD HC (High Capacity) drivers for OMAP850/Tornado? If yes could please attache here or contact me via PM?
i don't think you'll find that driver here...!!! but god luck...!!
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
..and some luck comes over us, if we need a special Hardware!Some HTC Devices handles SDHC, others do not...is this possible?Or not?
Extracting and installing the driver may be possible, Omap850 is there, but what about the CardSlot? Ive heard, there are some Specifications for SDHC...
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
bellevue Washington..I live not too far from there, i live in Everett.
SDHC driver
I happened to see a file called omap850_sdhc.dll in your own post:
http://forum.xda-developers.com/showpost.php?p=1407553&postcount=856
You opening this thread means this one doesn't work?
I already baught a 4 GB SDHC card a month ago to find out it doesn't work in any device i have... damn. Hope somebody can get a hold of the driver for us.
May not work..
...because ive read the sdhc.dll means HostControl and not HighCapacity....
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
DSF said:
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
Click to expand...
Click to collapse
Hello,
Tried it on my Tornado, but doesn't work with SDHC. It doesn't detect the Storage Card. It does work with a 2 GB non-SDHC card. So no harm to install it, but you still cannot read SDHC. damn.
hi and thanks for testing
.. strange.. maybe we need newer version of omap850_sdhc.dll?
Unless I'm missing something here: The file you had linked was from a post in the Universal forums. The Universal doesn't have an OMAP850 cpu but an Intel Bulverde. Since the driver support is cpu dependent, it was to be expected that the one for the intel won't work for the omap.
Yes, but I can see and use the storage card with these dlls.
I've tried to copy sdbus.dll & sdmemory.dll from other WM5 build (omap850 smartphone) and the phone doesn't recognize the storage card anymore. After deleting these dlls (when deleting , the original file from ROM comes back) and rebooting , storage card is avaiable again.
Hi there..
I have a Problem, with the WM6 roms.. I tried TNT and XDA, but they don't detect my miniSD Card.
This always worked with the Original Orange Switzerland ROM..
What could cause this problem and how can I resolve it?
what process did you use to upgrade your wizard to wm6?
I followed the following instructions:
http://forum.xda-developers.com/showthread.php?t=285435
First I installed the T-Mobile 2.26 and upgraded to 3.08..
did you remove your card before flashing?
ytsejam_ said:
did you remove your card before flashing?
Click to expand...
Click to collapse
Not 100% sure, but I think so ;-)
hhmm.. because i know, there are issues regarding upgrades killing the memory card..
did you apply the paradis change pagepool via activesync?
Well I tried two different storage cards, so it can't be the card itself..
What is a paradis change pagepool?
it's a program to change your pagepool (memory cache allocation).. don't mind.
you mean 2 different cards don't work? hhmm.. now i'm baffled.. have you tried performing a hard reset yet?
hmm, no.. But I tried now.. No difference..
I will try to reinstall my operators ROM..
Are you using File Explorer / My Device and not finding the card?
If so, touch My Device for the drop down menu, then click on the card as it should show there. Once you actually go to it, it should show in the My Device screen like all the other folders.
I've had this happen to me a few times with some of the newer Mobile 6 roms and this has always worked for me.
Good luck.
My Qtek 9100 won´t detect my storege card after upgrading to WM6 (release 3). What do you mean by "drop down menu"? I´m completely new with WM6...
just try inserting it a few times. i have had to do that with my both my devices with wm5 and wm6.
Well, it detects my storage card again:
I reinstalled the official Orange Switzerland Rom and did the whole downgrading and unlocking procedure again.. But it was worth it )
@ LongKong
did you search for your problem?
you may have found this:
http://forum.xda-developers.com/showpost.php?p=1432665&postcount=15
I have the same issue ... I made a compatibility test with the ROMs - with some I don't have any problem with others it had.
Any ROMs after TNT5 I tested did not work out so I sticked to TNT5 so far.
You may have a try and can confirm. I did not test the most recent ROMs as I currently use another device most of the time.
Cheers!
Storage card problem
Hello i have the same problem with my wizzard. 2Gb Lexar micro SD doesn't work, but it had worked before. When i insert it in other smartphone WORKS.
I also have other 256Mb card that works in my wizzard!!
Any explanation?
rom version 6.1.0.0
rom date 1/26/08
radio version 01.12.10
protocol version 4.0.13.23
it may be hardware-related, not software. after i took out the memory card when i inserted it back it wasn't showing in file explorer but after a while i found that i have to insert it, hold it for a few seconds in and then release it. I thought about a rom issue but it wasn't that after all.
hope is usefull for you guys also
blazex said:
it may be hardware-related, not software. after i took out the memory card when i inserted it back it wasn't showing in file explorer but after a while i found that i have to insert it, hold it for a few seconds in and then release it. I thought about a rom issue but it wasn't that after all.
hope is usefull for you guys also
Click to expand...
Click to collapse
Just insert it a few times. It is a hardware issue with the memory card slot. I had this problem ALL the time.
Can anyone help me... I got a new 8gb SD Card but cant get CoPilot installed to it... does anyone have a website with full instructions?
Cheers
Robert
Delete registration/activation file
I did this a while ago and had to phone the support line, very helpful. All I had to do was delete the licence file and it then all worked as per instructions. Afraid I can't remember what the filename was.
What I done this morning at 5am was install the udk Diamond R2 rom and then installed copilot from the \Windows\copilot.cab file and works a treat on my 8gb card but took a while for me to figure out the safety camera database...
redesignni said:
Can anyone help me... I got a new 8gb SD Card but cant get CoPilot installed to it... does anyone have a website with full instructions?
Cheers
Robert
Click to expand...
Click to collapse
Robert how did you go with this, i am having the same difficulties.
i flashed my rom yesterday and all i did was run the installer from the memory card again, but when i upgraded to my 8gig card all i did was copy everything from my 1gig sd too the new one and ran the installer again.
I just run the installer from the memory card to install on memory card. Then conencted it and downloaded the maps... perfect!
You shouldn't need to flash your ROM to do it, at least I didn't. On my Touch Cruise (and HTC Touch) I copied the entire microSD card that shipped with CoPilot Live 7 to my laptop, and then copied from there to a 8gb microSD -- inserted it into my Touch Cruise and it prompted for installation just as with the original microSD. I did find things to be a bit speedier if I installed the program files to the device RAM instead of the card -- it runs from the device but references the map data from the card. You can though install the program to the card if you prefer.
Also, before it would run properly on my Cruise, I had to 'deactivate' the installation on my HTC Touch.
redesignni said:
What I done this morning at 5am was install the udk Diamond R2 rom and then installed copilot from the \Windows\copilot.cab file and works a treat on my 8gb card but took a while for me to figure out the safety camera database...
Click to expand...
Click to collapse
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks