Can anyone help me... I got a new 8gb SD Card but cant get CoPilot installed to it... does anyone have a website with full instructions?
Cheers
Robert
Delete registration/activation file
I did this a while ago and had to phone the support line, very helpful. All I had to do was delete the licence file and it then all worked as per instructions. Afraid I can't remember what the filename was.
What I done this morning at 5am was install the udk Diamond R2 rom and then installed copilot from the \Windows\copilot.cab file and works a treat on my 8gb card but took a while for me to figure out the safety camera database...
redesignni said:
Can anyone help me... I got a new 8gb SD Card but cant get CoPilot installed to it... does anyone have a website with full instructions?
Cheers
Robert
Click to expand...
Click to collapse
Robert how did you go with this, i am having the same difficulties.
i flashed my rom yesterday and all i did was run the installer from the memory card again, but when i upgraded to my 8gig card all i did was copy everything from my 1gig sd too the new one and ran the installer again.
I just run the installer from the memory card to install on memory card. Then conencted it and downloaded the maps... perfect!
You shouldn't need to flash your ROM to do it, at least I didn't. On my Touch Cruise (and HTC Touch) I copied the entire microSD card that shipped with CoPilot Live 7 to my laptop, and then copied from there to a 8gb microSD -- inserted it into my Touch Cruise and it prompted for installation just as with the original microSD. I did find things to be a bit speedier if I installed the program files to the device RAM instead of the card -- it runs from the device but references the map data from the card. You can though install the program to the card if you prefer.
Also, before it would run properly on my Cruise, I had to 'deactivate' the installation on my HTC Touch.
redesignni said:
What I done this morning at 5am was install the udk Diamond R2 rom and then installed copilot from the \Windows\copilot.cab file and works a treat on my 8gb card but took a while for me to figure out the safety camera database...
Click to expand...
Click to collapse
Related
HI.. m Oicnev.. this is regarding extracting the files from the EXE rom.. have download both the 131 and 132 (a later version, as told), but couldn't extract the files.
Have tried using winrar and winzip, but to no avail.. tried right-clicking, but no option to extract, only add to archive.. tried accessing from within winrar. there was the option to extract, but it always returned, no archive file/s in there..
tried running the EXE rom, it ran, posted extracting files, and the showed its dialog box.. then, as told, it returned an error in the end..
i used netants as downloader..
is there anything i further need to do to be able to extract the files? Is there any other way i could get the files? PLS HELP!!!
ALSO, i bought a 4gig SD Card.. the problem is my xda mini couldn't access it, unless, as it prompted, it formats it "to make it readable." This i did, and yes it became readable, but it got converted to 2.1gig. i returned it to the seller, had it replaced, thank goodness the seller was kind.. but now, i don't know what to do.. the SD Card is accessible as 4gig from my card reader though... will the rom upgrade fix the problem? Is there any other software that i need to have? PLS HELP!!!
MANY MANY THANKS, in advance!
You used one of the ROMs from this site's FTP right? I've tried several and all of them extract just fine! If you're looking for the latest ROM that is used widely without any problems, 1.13 T-Mobile ROM, that can be found here.
From there you can use kta's + ampda's guides or my own guide to run you through the upgrade process!
Thanks... only that... Stil problem - 4gig SD Card vs. Mini
Ey, know what, i finally solved my puzzle re EXE ROM.. have managed to extract the files... i tried running the EXE file, clicking next til the last one before it would start to upgrade, but without clicking it (i read from one of your guides).. then i searched for the files in my hidden windows temp folders... found them.. and ran the upgrade.. It went perfectly, i liked it..
But my BIG other problem remained.. still, my XDA Mini couldn't access my 4gig SD Card, despite all the upgrades.. it was still prompting me to format it (beccause it couldn't read it), which must not be done, coz it will convert it to 2.1gig.
I read in one forum to try partitioning the SD Card into two 2gig partitions.. i found it sound.. i followed the instructions.. i ran "compmgmt.msc" from my pc through "start/run".. I was trying to make the first step of deleting the partition through 'Disk Management', but to no avail.. Yes, there was a 'delete partition' option shown in the menus, but unlit; meaning option not available.. So, i was already stalled, couldn't proceed anymore...
Anyone with more options out there? please help...
Many thanks
Your device formatted the memory card as FAT16. This is only supported up to 2 GB:
http://en.wikipedia.org/wiki/File_Allocation_Table#Final_FAT16
Just format the memory card with your card reader as "FAT32" and you will have 4 GB capacity.
RE FAT16
Hi... i checked through my card reader.. its in fat32 format...
@esackbauer,
are you sure the fat16 fat32 topic is the answer to the problems with 4 gig cards? to mee, it doesnt seem so!
see:
http://forum.xda-developers.com/viewtopic.php?t=58669
Hi all, I am running TomTom 5 and or 6 on my Qtek 2020i (alpine I think) and wondering is there a way of installing the program to the SD card and running from the SD card or having the install files on the card as a back up. The reason I ask is... last year the battery ran out and I lost the program and all the routes!!
When I did the install it asked where i would like to install it and I chose storage card but the program was still installed to the device!!!
There must be a solution because I do not want the same thing as last year, although I am wiser for it, always checking battery life
Cheers
Nygie
Hi everybody
i've flashing my V1640 with ROM version 2.05.00 WWE and now it's impossible with the file explorer to access at my SD card
The size is 2Go and when i'm using my card with my computer, it's working !
Anybody can help me ?
Thanks a lot
I have the same problems with a 2GB Kingston SD card. It was always a bit unstable with the O2 rom, but now it locks up on the WM6 rom.
To explain what it is doing: When I insert the card, no problem, but when I try to browse to the card contents via file explorer (or Windows Media Player for example) the app locks up and after a while the Universal reboots. It also reboots as soon as you eject the card.
I haven't checked the card on a PC but I don't see any reason why it wouldn't work.
I am currently using my spare Kingston 1GB SD card without problems.
Hello zOmb13e
So i'm trying to use an older 256 Mo SD card and it's working perfectly ! you're right the 2go does'nt work with the WM6.
So now i must buy a 1Gb SD card
thanks a lot for your answer
pierre-tho said:
Hello zOmb13e
So i'm trying to use an older 256 Mo SD card and it's working perfectly ! you're right the 2go does'nt work with the WM6.
So now i must buy a 1Gb SD card
thanks a lot for your answer
Click to expand...
Click to collapse
It is more likely that the Rom you have flashed has SDHC support built in.
These drivers have issues with SOME non SDHC Cards.
Either search for JWrightMCPS's SDHC Driver Rollback cab, (I think there is a link in his post) or upgrade to his latest Rom which supports both, or wait for Laurentius and mine new update (release date 1st November) or buy an SDHC compatible card.
Cheers,
Beaty
Hi all
Sorry for my poor English
I have tried three to four WM6.1 Rom on my HTC TYTNII, whenever an application try to read the storage card, it hangs, but any other application installed on device working fine,
also tried to exchange the SD card with my friends TYTNII,
both my and his card working on his device
both my and his card hangs on my device
however, if I flash a WM6.0 Rom, this issue doesn't exist, did anyone meet this or only me ???
BTW,
the card is a SanDisk 8G
3.29.707.0 WWE
05/07/08
1.65.16.25
25.83.40.02H
KAIS130
SPL-3.28.Hard
CPLD-8
Hope we may have a solution on the above, Thanks for any reply.
the apps that are freezing, are they installed on device and reading files on storage card orr installed to storage card and the shortcut is on device? if the apps are installed to the storage card they will sometimes run slow, try uninstalling them and reinstalling to the device. also you might check your running programs in the task manager. running programs will obviously eat RAM and thus the device will run slower
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
rookery said:
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
Click to expand...
Click to collapse
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
variosteph said:
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
Click to expand...
Click to collapse
Thanks for your information, but I had flashed "Dutty's", "TNT Series" and HTC official, same problem happened a few days after the flash, i assume it may not cause by download problem....
are there any way to verify a flash result ????
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
rookery said:
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
Click to expand...
Click to collapse
1. Try removing the SD card and SIM while flashing the new ROM.
2. Try formatting the SD card in FAT32 again.
Clean your card slot in the phone its dirty thats all .
Tried removing the SD card and SIM while flashing the new ROM
Tried formatting the SD card in FAT32 again.
problem still reamin,
however, once reflash back to Windows Mobile 6.0, SD card works reflash 6.1 SD hang.....any idea?
I've seen a similar symptom to this if I try to change my Internet cache to write to the storage card.
Both the OEM AT&T Tilt 6.1 firmware and a couple of the flashes from here - same thing.
Now here's the cute part - I also have a 2GB NON-SDHC card and so far, with THAT card, it hasn't happened.
This looks like some kind of registry problem in these ROMs, and it also appears to be in the base code and across a number of different loads.
It scrambled the hell out of the formatting on my 4GB card when it happened the first time. The second time I SAW a scrambled directory in Total Commander, but a checkdisk on my PC (it has a reader that can read the SDHC cards native) came back clean.
There's something funny going on with these loads somewhere.
Never mind - it just blew up the same way on the non-HC card. Same deal.
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks