Boot loader lost Orbit 2 - Touch Cruise General

Dear Friends,
keep doing great job,
I need your kind help to get back my orbit 2,
I have flashed android built on nand and flashed update too, but it has stop working touch screen. so i tried to get back my windows rom back. but now i have lost windows default bootloader. i have tried all the buttons too with soft reset. but i am failed to get back. i have tried t remove battery then reset , also not working this trick.
now i have locked screen of android built with non working touch screen without

Related

Flashing WM 6.5 - actually installed Android Froyo - possible or not? -no Sync/Backup

Hey Guys,
I flashed my Touch Cruise with all the Android ROMs, I could get in the forum. My problem is, the installed OS is not stable. At first it was, so I decided to choose the NAND installation and to format the ROM inside the phone. I didn't realize, that the way back to WM without a backup would be much more difficult. The problem is, I have Win7 installed (32bit and 64bit Version), I am not able to get the Sync Software between the cell phone and my XDA just working. So, what can I do to get WM back on my phone?
Thanks for your Tipps and Tricks.
Greetings doddele
same thing here
yo my friend i did the same thing - the android is amazing but its not for the htc cruise. if you can reset all the settings to normal - i.e. hold green and red button while soft reset.. if that works get the phone into boot loader mode you know, bat out put in and cam button and switch on 3 colours boot screen.. then load original touch cruise rom - winmo 6.1 then use that for a few hours and then flash the winmo 6.5 of your choice - you did save all the files you need in a special folder i am sure.. to get ruu utility to work you dont need sync software..PEACE

[Q] Raphel freezing in any boot type

Hi, I've got the HTC Touch Pro (Raphael)
And I've had it in my drawer for a while becuase it broke down one morning and I just bought a new one, But I'm thinking of sorting out the problems with it now since I need an extra phone.
The main problem with it is that it locks up in boot.
If I do a normal boot it locks at the HTC logo and the "friendly dinging sound"
I was thinking of reflashing it, but since it never boots up the only flashing I can think of is through the SD card.
So i put the file "RAPHIMG.nbh" in the root folder of my SD card and booted it up using the volume button pressed to looad the loader, it swaps over to a loading screen then it just freezes here aswell.
Any ideas on to WHY this happens and HOW to solve the issue.
issue solved, I managed to get the bootloader to get to waiting mode and cet a connection to it from my windows computer and run a default ROM onto it, now I can start modding it
i couldnt help but notice this thread, im am facing the same problem, except that my phone has never been flashed before, its fully stock. how did you manage to load a ROM beyond the "Loading..." screen. i have done exactly what several guides, including the ones i found in the forum, have told me to. Neither the SD card flash, nor the Activesync flash are working.. help please?
flashing
try tsis :http://forum.xda-developers.com/showthread.php?t=540290
I've tryed this on Touch Pro and it works , but do only the driver replace on windows......don't do task 29 or else .Instal the driver bring the phone into a bootloader and flash a stock rom...
hope it will do...

[Q] Thl t11 Bricked possibly

Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
kleptofox said:
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
Click to expand...
Click to collapse
Have you tried reflashing the original ROM using Flash Tools (everything from Needrom ...)?
Me too
I also did a thing like this. I rooted the phone and it workd, than I tryed to install xPosed, it robooted, but the screen turned black. Than I started the phone in recovery mode and tried a factory reset, it turned black and now I think it's bricked. When i put off and put on the battery it makes a short logo animation and than turns black.
I tried with sp flah tool but it doesn't start or not recognise the phone, the driver are installed but with my pc and my laptop it doens't work. I hear the sound of when I connect and disconnect the phone, but apart from that it's dead. Please help me!
solved THL t11, hangs at black screen after factory reset in recovery mode
Hi,
I had the same problem with my unrooted t11. I just tried another rom and it solved the problem. The rom I used is THL_T11_140401_MNSop.cz, google it. I can not post the link as I am new to this forum...
Good luck!

[Q] Touch in TWRP not working after Lollipop

I updated yesterday, everything went smooth even the flashing of the recovery which I see some people are having trouble with.
Only problem: The touch screen doesn't work while I'm in TWRP.
Only way i got it to work:
Enter TWRP
Wait till screen locks
Open screen - Then the touch works (If I manually lock it then wake it up the touch screen still doesn't work).
I've looked around and I don't think its Lollipop related as people encountered this problem before.
Any suggestions?
Thanks in advance to everyone who helps~

[Q] Samsung galaxy mega 6.3 (i9200) ROOT Issues

Hello. I Was wondering if someone can help me with a dilemma......... i recently got my mega a month ago. I then decided to root my mega (As i do with all my android devices)The rooting process worked out great. The phone booted.....Everything's all peachy! root was successful! After about 3 weeks i wanted to record my screen. By the way i was running kitkat on my mega. So i installed a screen recording program. i wanted to record the screen so i started the recording..... but it wasnt recording. it kept saying an error message i think it when like gpu is not supported and change to cpu something like that! i thought nothing of it... so i changed the settings to gpu then to cpu (Not knowing what i was doing) after it failed to record again i threw the towel in and quit. i then played one of my mobile games(FNAF2) after i lost the game i went back to the homescreen and the homescreen was acting up... it was in landscape mode when i had the phone upright. it was bugging me to the point where i just rebooted my device. i tried rebooting my device BUT IT WAS IN A BOOTLOOP! i had no idea what was going on. So i tried to restore the backup and it was restored but it was still in a bootloop. at this point i was freaking out! when i went home that day i put the device in download mode and flashed the stock firmware but it failed and didnt work. but when the phone rebooted it booted up and my phone was on activation screen and it was in a different language. then i soon found out that my touchscreen wasnt responding! neither was the home button or back button. i really dont know whats going on. kies does not work i tried emergency firmware initializing and kies didnt read it i tried reinstalling kies and my phones drivers 4 times and it was a no go...... but i finally found a english firmware and i flashed it but it failed and said something like dev_not supported or something so that didnt work either..... i booted up my phone and the language was back to english and my touchscreen wasnt working neither was my home buttons or anything. i also tried installing custom roms but everytime i try to install them it says it completed installing but when i boot up my phone its the same activation screen. i really need help anything that can help will be greatly appreciated. also everytime i boot up it always says set warranty bit:Kernal

Categories

Resources