[q] defy dead - Defy Android Development

I need your help guys
I installed de "adlxmod 2.0 Froyo", and after that, I wanted tu put the 3.4.2.131 Orange ROM, but when the RSD Lite finishes the installation and says "manually power up this phone", the phone stays all the time changing between motorola and orange logo, and it never starts.
I have tried to put with the RSD Lite the 2.5.1 rom and the 3.4.2.117 ROM. With the 2.5.1 it doesnt even start, and with the 3.4.2.117 the motoblur logo never goes and the defy doesnt starts
What can I do?
Thank you very much

jsabaterp said:
I need your help guys
I installed de "adlxmod 2.0 Froyo", and after that, I wanted tu put the 3.4.2.131 Orange ROM, but when the RSD Lite finishes the installation and says "manually power up this phone", the phone stays all the time changing between motorola and orange logo, and it never starts.
I have tried to put with the RSD Lite the 2.5.1 rom and the 3.4.2.117 ROM. With the 2.5.1 it doesnt even start, and with the 3.4.2.117 the motoblur logo never goes and the defy doesnt starts
What can I do?
Thank you very much
Click to expand...
Click to collapse
Flash 3.4.2 ROM, go to recovery using POWER+VOLDOWN, press both VOLUP and VOLDOWN to access recovery and Wipe Data, you will be able to boot it after it.

Just what Edition said! 100% certain it will sort your problem out. (i had the same thing a few weeks back).

Related

Moto DROID 1 on CM7RC2 can not boot into CWR

Hello all
I recently upgrade to an HTC TBolt but decided to keep my droid for mp3 playing since it has great battery life.
Well I went to download CM7 RC4 and the download always stopped I chalked this up to bad wifi signal no big deal. Downloaded the zip on computer moved it to the SD.
So not I go to boot into CWR and it wont, tried through CM7 reboot menu, rom manager, x + power, power + volume down still nothing.
The phone boots to moto logo site for a bit goes black and back to moto logo for a few seconds or so then goes right to CM7 bootlogo...
Tried a CWR reinstall didnt seem to work. I have not yet tried a downgrade CWR yet though.
Motorola Droid
CyanogenMod 7 RC2
Rom Manager 3.0.0.7
Clockwork Recovery 2.5.0.1
Any help with figuring this out would be great and thank you in advance.
Still can not get this to work, could really use any help anyone have any ideas at all?

How to recover my defy updated with official 2.2.2 SEA froyo

Hey guys,
I need some help, this is my first time to post here(noobie). Anyway, I have learned plenty of things here in this forum..now my problem is I updated my defy with the official 2.2.2 froyo (singapore) it was ok at first though had some camera issues it kept shutting down before taking a shot. now was going to do a nandroid backup have it rooted,SetCPU and stuff..My mistake was when I used the clockworkmod for defy it installed then when I was about to go to recovery mode it got stock in a boot loop..I panic and used the hard reset (stupid enough) that i was looking for the menu (which I just read today if froyo:use + & - keys for it) to which I cannot do anything I went to boot load to flash my old firmware ver2.59 SEA18 now at RSD lite it says PASS..but did not restart my defy.. now I cant even get it to recognize even after charging my battery using universal charger. though i still see the white light at the top when I plug it on my PC..
Can anyone help..sorry for my bad posting..THANKS a lot for any help..

[Q] [problem] stuck in Moto logo after MIUI

one of my friends installed the MIUI rom on his defy but when he installed something named RTL FIX his defy stucked on Motorola logo and it dosn't start anymore. He thinks that he installed a wrong version of that file(rtl fix) and he tried to flash some other roms using RSD Lite but seems like it dosn't work! please help us. thanks a lot!
Why did he flash "RTL Fix", or maybe did you mean "RIL"? Don't need it, RIL works perfectly now.
Try to wipe data from custom recovery ( clockwork mod ). If it's still stuck on M logo, install MIUI again.
because he wants to add persian language to the rom he used that rtl fix. his battery is going to get finish in boot loader and when he plug in the charger there will be a exclamation mark in battery ! whats hapening? how can he charge the battery ? in bootloader or powered off? we really need help please!
Go to stock recovery and reset factory data
Press Power button + volume down
When the small android with a ! appear, press vol. up and down at the same time and reset factory data
It will work I'm sure lol

[Q] cant access bootloader D2G

Hi guys, just made this account but i've been here for a while.
My D2G has problems.
My power button is broken and i cant access the bootloader.
My phone is (thank god) rooted and has stock 2.2
I tried to get venusX 3.2 gingerbread but forgot to sbf.
im stuck at the red M logo with the bee and cant sbf (power button im guessing)
I tried to sbf since my battery autoboots when inserted and held the up key to see if i could get into the bootloader.
This is the problem why i cant sbf:
My screen is blank and flashes on and off every 15 seconds and RSD Lite 4.9 doesnt even detect the phone. (PC too)
So to sum this up, basically i cant get into the bootloader fully and cant sbf to stock 2.2
I seriously need help with this.
Oh and i dont think i should ask this in this question since its unrelated and all...
but my D2G's Data does not work for some reason and i can only use it on wifi for the web (no talk/text) Verizon told me that i need to call *228 and press 1 and 2 on separate calls. Needless to say it did nothing. Everytime my phone boots the 3G icon pops up for 2 seconds and then disappears.

[Q] Factory reset bricked my device

Hi everyone, I want to know what this could be, my phone was just rooted, I tried to do factory reset on the android JellyBean(Configs>Privacity>Factory Reset), now my phone is stucked on a bootloop, I try to turn on my device and a screen with android being repaired appears, then a red triangle appears on the belly's droid and my phone turn off, anyone know what could be?
Really thanks for the attention mates, and sorry for my bad english!
@update
Just boot on recovery and Wipe Data/Cache, now my device is working fine, thank you guys xDD
I have the exact same problem on Canadian XT 925 all stock. Every time the phone is turned on, it goes back to the android robot with blue orbits moving in the stomach(repair), then the screen just goes black. The only work around I found is to use 3 button combo to go into recovery menu and hard reset the device, but this happens every time I turn the phone on and off.
Titerepayaso said:
I have the exact same problem on Canadian XT 925 all stock. Every time the phone is turned on, it goes back to the android robot with blue orbits moving in the stomach(repair), then the screen just goes black. The only work around I found is to use 3 button combo to go into recovery menu and hard reset the device, but this happens every time I turn the phone on and off.
Click to expand...
Click to collapse
This is an issue on the Rogers and Fido RAZR HD ...
Download the Original Rogers/Fido Rom : http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Download RSD Lite : http://fwteam.grupoandroid.com/OTAs/RSDLite6.1.5.zip
Flash !
Your phone is now 100 % full working !
Same thing
o2qc418 said:
This is an issue on the Rogers and Fido RAZR HD ...
Download the Original Rogers/Fido Rom : http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Download RSD Lite : http://fwteam.grupoandroid.com/OTAs/RSDLite6.1.5.zip
Flash !
Your phone is now 100 % full working !
Click to expand...
Click to collapse
Hi everyone. I got the same issue, but in my case i can't boot on fastboot, and my pc just recognize my razr hd as "QHSUSB_DLOAD" and can't find this drivers.
I tried to RSD as you said but RSD won't recognize it, so i don't know what else to do.
Any help will be appreciate.
:crying::crying:

Categories

Resources