DISCLAIMER: It is now 5AM and I've had about 8 hours of sleep over the past 48 hours so I might be imagining things. I'm pretty sure there is a difference in audio quality, but without 2 phones side by side, it's hard to compare
Instructions:
1) Flash any DesireHD ROM, your choice!
2) Flash the attached zip file with CWM (it includes the Inspire 4G kernel)
3) Install the attached PropEditor apk, and run it.
4) Open build.prop using PropEditor and change
Code:
htc.audio.hac.enable=0
to
Code:
htc.audio.hac.enable=1
5) Hit the menu button and save! REBOOT!! win?
Let me know how it goes! I do hope I'm not going crazy
I'll update tomorrow with what exactly I did. Too tired to type it out now, GOODNIGHT.
THE DIFFERENT VERSIONS:
-V2: Better quality than V3, speakerphone microphone does not work
-V3-test: Slightly worse quality than V2, better than no sound fix, speakerphone microphone works 100%
palletguru said:
Went back to audio V2. I can personally attest to the fact that the sound is as good as stock - did a side by side with coworker's non routed inspire.
Click to expand...
Click to collapse
CHANGELOG:
V3-test: Removed extra files, sound quality is around the same (or slightly worse) compared to V2. Speakerphone Mic should work
V2: Removed AIC3254_REG_DualMic_MCLK.csv and AIC3254_REG_DualMic.csv as suggested by BelacNongaw to fix mic
Testing her now, thanks!!
Btw, which DHD Roms have you tested using this fix?
I'll report back after testing it (Core Droid DHD)
r34p3rex said:
DISCLAIMER: It is now 5AM and I've had about 8 hours of sleep over the past 48 hours so I might be imagining things. I'm pretty sure there is a difference in audio quality, but without 2 phones side by side, it's hard to compare
Instructions:
1) Flash any DesireHD ROM, your choice!
2) Flash the attached zip file with CWM (it includes the Inspire 4G kernel)
3) Install the attached PropEditor apk, and run it.
4) Open build.prop using PropEditor and change
Code:
htc.audio.hac.enable=0
to
Code:
htc.audio.hac.enable=1
5) Hit the menu button and save! REBOOT!! win?
Let me know how it goes! I do hope I'm not going crazy
I'll update tomorrow with what exactly I did. Too tired to type it out now, GOODNIGHT.
Click to expand...
Click to collapse
Hey whats up man...I know this might be asking a lot is there a way to a make a video about this? But no rush on it bro.. Cause you have been busy with this stuff
Although still not perfect, its 10x better than before with the telus. Unless I forgot the quality of stock which could be possible. But there is definitely a huge difference, to the point that I'm not going back to telus. Good work! Plus, the stock source kernel is being used which is always the best for stability eventhough telus didn't cause any stability problems.
Inspire (rooted)
Leedroid v2.0.0
Telus kernel
AOSP Lockscreen
Exception to my last post, it actually did fix everything! Audio in media player sounds as it should, ringtones sound perfect, etc. This thing is now perfect! Dhd roms, using stock kernel with perfect audio, themes, root access in less than a week! I love xda!
Inspire (rooted)
Leedroid v2.0.0
Stock kernel w/r34p3rex audio fix
AOSP Lockscreen
Could unrooted people use that apk to enable hsupa in the build.prop? I'm curious....
Sent from my Inspire 4G using XDA App
The hsupa category is 6. What would should it be at to enable hsupa?
Inspire (rooted)
Leedroid v2.0.0
Stock kernel w/r34p3rex audio fix
AOSP Lockscreen
No good on other end they can't here anything.
Inspire (rooted)
Leedroid v2.0.0
Stock kernel w/r34p3rex audio fix
AOSP Lockscreen
davwman said:
The hsupa category is 6. What would should it be at to enable hsupa?
Inspire (rooted)
Leedroid v2.0.0
Stock kernel w/r34p3rex audio fix
AOSP Lockscreen
Click to expand...
Click to collapse
Well I'd have to compare the stock build.prop to the DHD one that people have installed, but there are these values in the DHD one:
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 3
Guessing one of those is changed in the stock. Will check later
EDIT: Just pulled the build.prop off my unrooted phone and they look the same... odd
failed to remount system rw
I keep getting an error when trying to save build.prop after editing. "failed to remount system rw". I tried creating a backup and editing that then restoring it but got the same error. Am I missing something simple?...lol...thanks
I've been working on this too. Remove AIC3254_REG_DualMic_MCLK.csv and AIC3254_REG_DualMic.csv from /system/etc/ in the zip and this will work without breaking the mic. Good job.
BelacNongaw said:
I've been working on this too. Remove AIC3254_REG_DualMic_MCLK.csv and AIC3254_REG_DualMic.csv from /system/etc/ in the zip and this will work without breaking the mic. Good job.
Click to expand...
Click to collapse
You guys are great!
Inspire (rooted)
Leedroid v2.0.0
Stock kernel w/r34p3rex audio fix
AOSP Lockscreen
wildace408 said:
I keep getting an error when trying to save build.prop after editing. "failed to remount system rw". I tried creating a backup and editing that then restoring it but got the same error. Am I missing something simple?...lol...thanks
Click to expand...
Click to collapse
Another way to edit build.prop is
Reboot into recovery
Under mounts and partitions mount system
On the computer:
adb pull /system/build.prop
Edit build.prop
adb push build.prop /system/build.prop
Yay sounds great with my HD2 !!
davwman said:
You guys are great!
Inspire (rooted)
Leedroid v2.0.0
Stock kernel w/r34p3rex audio fix
AOSP Lockscreen
Click to expand...
Click to collapse
does the sound now work on both ends? can you hear who you are talking to and can they hear you?
If the OP removes the two files from the zip that I mentioned in my post, yes. Until then, you can browse the zip with astro on the phone and delete them yourself before flashing.
so do I need to remove those two files from the zip? Im just about to flash a new rom and this kernel and then edit.
aNdroidnut said:
so do I need to remove those two files from the zip? Im just about to flash a new rom and this kernel and then edit.
Click to expand...
Click to collapse
Yes, or you won't have a working mic.
did i do it wrong?
I'm unable to save, so i save it to sdcard then move the file to /system
I did not remove anything.
I leave myself a voicemail, I can hear myself just fine!
netnerd said:
did i do it wrong?
I'm unable to save, so i save it to sdcard then move the file to /system
I did not remove anything.
I leave myself a voicemail, I can hear myself just fine!
Click to expand...
Click to collapse
Remove the two files as mentioned and follow the steps posted by the OP.
Related
Updated and Final build of the Stock
Rebuilt from the ground up, great response times on everything now at stock speeds!!!
NANDROID, NANDROID, NANDROID, I hope that is clear enough.
Upon install it will copy over the EnableJIT, DisableJIT, and the 691 Kernel to your sdcard for your convenience.
If you follow these instructions to the letter you shouldn’t have any issues as you can always disable the JIT to return to normal use.
Make sure you change the wallpaper as instructed there is a bug and if you do not you will loop.
Installation Instructions
WIPE, WIPE, WIPE
Flash the rom , boot complete, sign in, and let everything update.
THIS IS IMPORTANT!!!Change the wallpaper, I don’t care which on you pick just pick something different that the default one on boot
Then reboot to recovery
Flash the 691 kernel
Flash the EnableJIT.zip
Reboot (dont wipe)
It may boot loop once just let it go. if it doesn’t take reboot to recovery and flash DisableJit.zip
Reboot.
Then you can try again on the enable jit, once enable it has been smooth.
Darktremor A2SD 2.7.5_pf4a, thank you tkirton
no memory managment 691
With medium memory management
Wiki Page
I would like to thank mtnchkn and chromiumleaf for setting up a Wiki on what works and doesn't with the rom. Please check this page for information first before posting.
_____________________________________
Sprint 2.27.651.6 STOCK Deoxed w/A2SD 2.7.5_pf4a
______________________________________
Sprint 2.27.651.6 STOCK ODEX w/A2SD 2.7.5_pf4a
______________________________________
•All protected apps in market
•Added:
HTC_IME v.25 (keyboard)
Busy box
Super User
Wifi tether 1.6
Note: It will not affect recovery.
-Files Sprint updated in .6 Just incase anyone wanted to know......
/system/bin/
debuggerd
/system/customize/MNS/
default.xml
/system/framework/
am.jar
android.policy.jar
android.test.runner.jar
bmgr.jar
com.htc.android.easopen.jar
com.htc.android.pimlib.jar
com.htc.framework.jar
com.scalado.util.ScaladoUtil.jar
core.jar
ext.jar
framework-tests.jar
framework.jar
ime.jar
input.jar
javax.obex.jar
monkey.jar
pm.jar
services.jar
svc.jar
/system/lib/
libopencore_rtsp.so
Hope you Enjoy!
Phone+Dialer DEODEXED from stock .5 build if you have issues with lag from.6 build
Phone+Dialer ODEX from stock .5 build if you have issues with lag from .6 build
Updated
Ok here is a updated framework, that will just give that ZEN!! feeling, check the screen caps attached
Thank you for this. I will try it because I am wondering if there is any difference between .5 and .6.
+1! Sometimes you just want some plain old stock.
I thought the .6 update killed the root exploit
cali310 said:
I thought the .6 update killed the root exploit
Click to expand...
Click to collapse
If its not the RUU then the recovery program should still be there and it should work/keep root. Wow this is stock with apps2sd set up ? sweet.
-J
Re: [ROM] Sprint 2.27.651.6 STOCK Deoxed w/apps2sd 6/15/2010
Does the .6 version fix the long delay when making a phone call. If so ill overclock this and use it as a base in my next rom. With credits of course
-------------------------------------
Sent via the XDA Tapatalk App
wow this looks like the rom for my brother.. every rom i put on his hero has the audio loss issue..etc.. was about to just flash the stock 2.1 for him.. but i like to keep him rooted for those just incase roms or themes he might like..
Papa Smurf151 said:
Does the .6 version fix the long delay when making a phone call. If so ill overclock this and use it as a base in my next rom. With credits of course
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Agreed, the long delay in the phone calls was killing me so I moved back to an older Rom with a diffrent RUU
Wrong thread, Sorry.
Papa Smurf151 said:
Does the .6 version fix the long delay when making a phone call. If so ill overclock this and use it as a base in my next rom. With credits of course
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
BLue on this ....very cool . can't wait to see that up and running....
-J
Re: [ROM] Sprint 2.27.651.6 STOCK Deoxed w/apps2sd 6/15/2010
Does the .6 version fix the long delay when making a phone call. If so ill overclock this and use it as a base in my next rom. With credits of course
Click to expand...
Click to collapse
BLue on this ....very cool . can't wait to see that up and running....
-J
Click to expand...
Click to collapse
Wouldn't be hard to do just need to know if the dialer/phone lag is gone. FEEDBACK PEOPLE FEEDBACK.
-------------------------------------
Sent via the XDA Tapatalk App
Papa Smurf151 said:
Wouldn't be hard to do just need to know if the dialer/phone lag is gone. FEEDBACK PEOPLE FEEDBACK.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Strange but it was dialing right away for me until I set up my googlevoice app now the lag is back.
google voice will lag the dialer no matter what rom you're running.
it'll lag even more if you select the option for it to ask you each time you dial.
Re: [ROM] Sprint 2.27.651.6 STOCK Deoxed w/apps2sd 6/15/2010
google voice will lag the dialer no matter what rom you're running.
it'll lag even more if you select the option for it to ask you each time you dial.
Click to expand...
Click to collapse
So does that mean the lag is gone in this rom other than gv which is a given
-------------------------------------
Sent via the XDA Tapatalk App
One thing I noticed after I flashed this to my hero was a2sd was version 2.7 Beta 7.
I was trying Fresh 2.1.2 earlier and I know that one used a2sd 2.7 update 1
I found the latest a2sd from another XDA post (sorry I can't post links yet)
so I copied that to my sdcard and flashed that and it seemed to update fine.
Is there any reason I should stay with the a2sd in the rom and not the updated one?
Flashed this a couple of hours ago. Nice to have a rom with everything in it. If I want something removed, then I just pull it. The only problem is that you cannot do a prl update. I pushed the OMADM.apk file from fresh to the /system/app folder and everything works as it should.
Great job getting this out there. Really appreciate it.
I have attached the apk to fix the updateing issue.
Only issue I've found so far is that Teeter won't run (It crashes for me on launch and I have to force quit).
Of course that may not be an issue for others, but I wanted to report.
Hello everyone glad to see there was a demand for something like this, Just my personal opinion but the dialer/phone lag seems to have been reduced greatly with the update, also the phone seems a little more responsive all around, havent seen any negative's about the update as of yet.
tjscreations said:
Only issue I've found so far is that Teeter won't run (It crashes for me on launch and I have to force quit).
Of course that may not be an issue for others, but I wanted to report.
Click to expand...
Click to collapse
I just got home from work, but I will look into this later this evening. Thanks for the heads up
jeb0921 said:
Flashed this a couple of hours ago. Nice to have a rom with everything in it. If I want something removed, then I just pull it. The only problem is that you cannot do a prl update. I pushed the OMADM.apk file from fresh to the /system/app folder and everything works as it should.
Great job getting this out there. Really appreciate it.
I have attached the apk to fix the updateing issue.
Click to expand...
Click to collapse
I was having the same issue updating my PRL and pushing the OMADM.apk file took care of it! On a side note I now have PRL 60666
Updated: 3/19/2011
NFX-Shift.Deodex.STOCK.V.2.0
NFX-Shift.Odex.STOCK.V.2.0
This will not wipe your data, ALthough always best to start fresh!
- [Kernel] [GPL] Sense 2.6.32.21 OC/UV 1.51GHZ (CFS-Smartass-TUN) Thanks to bcnice20
- Default CPU clock will be 1.0ghz with ondemand , changable thru setcpu or if you want to edit the kernel directly. I have never been a fan of the overclocking apps as once the system is boot they need to wait for the SU to grant permissions for the settings. this way it is from boot.
Remove the script below to use setcpu
If you would like to change the defaults in the kernel just look in system/etc/init.d/ 80screenstate_scaling
echo 245760 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo 1209600 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
System Currently boot at 1.2 ghz with the script. if you have issues with this speed remove the sript and reboot. This will allow for the settings in the kernel to boot at 1ghz.
- Unlocked 3G USB tethering & Sprint Hotspot - no need for any other apks aka wired or wireless tether
- Read ahead fixed to 256k for the SDcard (speed fix) - should increase the read times from sdcard
- 5meg limit on the mms
- Tweaks for the system to increase overall performance
- 4 in 1 menu w/hibernation (photo at bottom of post)
- Fixed 1x / 3g to be accurate
- zip align apps installed on data automatically
- Annoying ads in programs are blocked
Added:
Astro File Explorer
Titanium Backup
Updated:
Sprint VVM
Maps
Market
there where other just cant recall them
Ok, If you experience issues please in your post list the issues clearly so I wont miss them. I would perfer maybe list them first then explain them underneath.
Thank you!
On you Sdcard there is a folderfor the apps that have been removed, for easy restore
Removed_Apps/
AdobeReader.apk
amazonmp3.apk
GenieWidget.apk
Kindle-1.0.2.80600055-OEM-SingleSign.apk
nascar09-prod-release.apk
Quickoffice.apk
sfl-prod-release.apk
Sprint_Navigator.apk
Sprint_TV.apk
SprintZone.apk
Download ODEX
Download DEODEX
New posts for the Version 2.0 will begin After post #212
Tanks to all the testers your names will be added later when I have a little more time....
Sweet! Glad to see you developing roms even b4 you've received your shift lol. Downloading now
Sent from my PG06100
good deal nand welcome to the shift. ha ha. bout to test this out know. ive tried out some of your hero stuff and seen the good work you've done.
I did a full wipe before flashing, and it booted up, but does not seem to have a functioning launcher. If I turn the screen off, and back on, I see the lock screen, but swiping down results in a black screen.
Make sure you have cache wiped too, sounds like maybe a corupt download.
I've been running this for four days and have not had a single hiccup.
Sent from my HTC Evo Shift 4G
cloverdale said:
I did a full wipe before flashing, and it booted up, but does not seem to have a functioning launcher. If I turn the screen off, and back on, I see the lock screen, but swiping down results in a black screen.
Click to expand...
Click to collapse
if you can could you get me a ddms or logcat while booting so I can see what may be causing this issue for you.
As I said previously I dont have amy shift yet so I can only possibly track down the issue if you can grab a logcat or ddms report of the issue.
Thanks
glad to see the thread is getting active... will download and post feedback
BrandoKC said:
Make sure you have cache wiped too, sounds like maybe a corupt download.
I've been running this for four days and have not had a single hiccup.
Sent from my HTC Evo Shift 4G
Click to expand...
Click to collapse
The cache was wiped.
coming from a hero forums I was waiting for you to throw something up here that was slick and simple DL-ing
Sent from my PG06100 using XDA App
nfinitefx45 said:
if you can could you get me a ddms or logcat while booting so I can see what may be causing this issue for you.
As I said previously I dont have amy shift yet so I can only possibly track down the issue if you can grab a logcat or ddms report of the issue.
Thanks
Click to expand...
Click to collapse
I apologize, I already did a nandroid recover. Everything went through fine on the logcat, but after boot it kept giving me an error in regard to wakelock not responding. I probably had a bad download. I will try again this weekend (have to go meet the wife right now) and let you know the results. I am really excited to run this, so I am sure I can get it to work eventually. Thanks a lot for your work on this.
Running well for me, and I'm using bcnice20's oc-uv sense kernel with it ... albeit according to quadrant a little slower than the stock odex rom with the same kernel.
dhero1 said:
Running well for me, and I'm using bcnice20's oc-uv sense kernel with it ... albeit according to quadrant a little slower than the stock odex rom with the same kernel.
Click to expand...
Click to collapse
Well that is great then considering odex vs deodexed, cause we all now that there is about a 15 to 20% loss with deodexing a rom. Once I get my shift I will odex and really get into slimlineing the rom, just like the HeroC
Man it is great to see you here!! When I sold my hero, the guy wanted to keep your ROM that I was running on it. Paypal is about to see some action once I try this out.
Getting good quadrant scores on this rom:
Sent from my PG06100
Dread 7us said:
Getting good quadrant scores on this rom:
Sent from my PG06100
Click to expand...
Click to collapse
Which version of quadrant? 1.1.5?
Sent from my PG06100 using Tapatalk
Great to see you here man! I'm super stoked we got some good developers on the shift now. I cant wait to see what comes next
Any way to add the power widgets like CM6 had on the pull down menu? I loved having all my stuff soo easy to turn on/off. Usually I didnt like Sense because it slowed down the phone but the shift is super fast with it. I'm looking forward to the odex version your planning on making. Thanks for your hard work!
d1msum4lyfe said:
Which version of quadrant? 1.1.5?
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Actually 1.1.1. I tried standard edition from market (1.1.7) and get about the same (a little less first run). I don't have 1.1.5 to try.
Sent from my PG06100
fifedogg said:
Great to see you here man! I'm super stoked we got some good developers on the shift now. I cant wait to see what comes next
Any way to add the power widgets like CM6 had on the pull down menu? I loved having all my stuff soo easy to turn on/off. Usually I didnt like Sense because it slowed down the phone but the shift is super fast with it. I'm looking forward to the odex version your planning on making. Thanks for your hard work!
Click to expand...
Click to collapse
Yes there is a mod for it in the EVO forum, just need to port it to this, but cant do it yet till I actually get the phone so I can test
I am new to all this rooting and installing new roms, so please bare with me. I have downloaded this rom twice to my computer, but can not get it to install on my phone. I have extracted the file to my sd card, did a data wipe on phone, went to install zip from sd, but cannot "find" and install new rom. Any suggestions? At least I have found out how to do recovery.
Aaargh! said:
I am new to all this rooting and installing new roms, so please bare with me. I have downloaded this rom twice to my computer, but can not get it to install on my phone. I have extracted the file to my sd card, did a data wipe on phone, went to install zip from sd, but cannot "find" and install new rom. Any suggestions? At least I have found out how to do recovery.
Click to expand...
Click to collapse
Don't extract it, leave it as a zip to flash
Wifi Calling working on ROMs that don't have it included.
It looks the files needed as compared to other WifiCalling packages for other phones are:
/system/lib
libganril.so
libhtc_ril.so
libhtc_ril_switch.so
libkineto.so
librilswitch.so
/system/app
com.android.kineto.apk
Then in the build.prop append this line of text to the very end
Code:
rild.libpath=/system/lib/librilswitch.so
THE ZIP IS NOT FLASHABLE
Its only for testing purpose to make sure we get Wifi Calling working properly so we can make a flashable zip later when we start getting AOSP roms and custom kernels
I am going to work on a installable script from the terminal that will copy over the needed files to the correct directories then append the needed line of text do the build.prop
10Char, working on script
In one of the roms they had the t-mob wifi in a zip they didn't test it but I could look there
Updated with some more information that I gathered for testing
There is a kernel and a flashable zip that will put wifi calling back onto your phone. Check the insert coin rom thread for info on it.
silentsnow31802 said:
There is a kernel and a flashable zip that will put wifi calling back onto your phone. Check the insert coin rom thread for info on it.
Click to expand...
Click to collapse
yes but if you also check it, it will also put all the other tmobile crap on your phone, plus he couldn't test it since he is not on tmobile, so have you tried it and verified that it worked?
update posted. I currently have Wifi Calling while using Revolution HD
BrokenWall said:
update posted. I currently have Wifi Calling while using Revolution HD
Click to expand...
Click to collapse
have you check mic volume level? I have many people said they have trouble hearing me. I did a test call to my skype and the mic volume is indeed very low. I had to revert to stock rom to get volume back to normal.
sovereignty68 said:
have you check mic volume level? I have many people said they have trouble hearing me. I did a test call to my skype and the mic volume is indeed very low. I had to revert to stock rom to get volume back to normal.
Click to expand...
Click to collapse
I have always had low mic call volume running the stock ROM. This has been the case with both Sensations I have owned. Never had an issue with Skype, volume is always perfect.
Just tested this myself with the insertcoin build.prop (from the TMOUS Patch) and its working, using the libs and apk provided here.
BrokenWall said:
yes but if you also check it, it will also put all the other tmobile crap on your phone, plus he couldn't test it since he is not on tmobile, so have you tried it and verified that it worked?
Click to expand...
Click to collapse
Yes I have tried it. I was actually the one that tested the flashable kernel. It does install all the other tmobile crap but titanium backup made short work of that.
silentsnow31802 said:
Yes I have tried it. I was actually the one that tested the flashable kernel. It does install all the other tmobile crap but titanium backup made short work of that.
Click to expand...
Click to collapse
give me some time to sort through the differences in the build.props to see what is triggering the difference in wifi calling working or not then we will see if we can get something made.
So after looking at a build.prop from Revolution HD and then comparing it to the one from Virtuous, Stock, and InsertCoin TmoUS mod.
I think I have traced down the issues, looking into it a built more. After I find the needed values I will see if we can make an install script that will mod the build.prop lines and add the libs and apk and restart the phone.
Update for complete working Wifi Calling. I have tested it a few times and it works fine with only these files at minimum, no need to add alot of extra text or HTC/Tmobile crap.
Works for me thanks. Took me a bit to figure out that you still need to install after copying the apk to /system/app.
Thanks again.
Sent from my HTC Sensation Z710e using XDA Premium App
I forgot where I got this (sorry ) but it works on any ROMs I've tried. Flash it on top of the ROM. Currently using it with LeeDroid without any problems.
It doesn't have t-mobile bloatware.
http://www.mediafire.com/?fdsqwfo28lat0qx
tengtengvn said:
I forgot where I got this (sorry ) but it works on any ROMs I've tried. Flash it on top of the ROM. Currently using it with LeeDroid without any problems.
It doesn't have t-mobile bloatware.
http://www.mediafire.com/?fdsqwfo28lat0qx
Click to expand...
Click to collapse
This is not a problem, the only issue I have with this is that you loose any custom tweaks or settings the developer made to his/her ROM because your flashing a basic stock build.prop
I will make a script here shortly that will copy files to the needed directories and then append the needed information to the end of the current build.prop, and all you will need to do is run the script from a terminal or from ADB off the SDCard after each update.
When I start the wifi app, it connects to my network, but it gets stuck on "enabling....". Any suggestions?
Edit: NVM. After I restarted my phone it worked. Thanks.
Wifi calling working for me but have a small issue. The outgoing mic volume is really low on my end. People on the other end of the line can hardly hear me. Any chance you could bump up the mic gain values a bit?
I am having a few issues:
1. When I turn off wifi calling, the app automatically restarts and re-enables it. This occurs even when I select cellular as connection preferences.
2. When I select cellular for connection preferences, with wifi calling ON, it still uses wifi. Why won't it use the cellular signal?
Thanks.
Just share all these with anyone.
All fix included:
New added in v2:
1. A more native fix to USB connection ( moto portal&tool is available now )
2. add imoseyon tweak script
3. improve GPS(add UK/brazil/CH+HK+TW/USA services info)
4. some adjustment on auto brightness
5. fix losing (gapps) icon issue (area related issue, redirect google services in hosts)
6. enable WIFI tethering
7. try to improve battery charging(replacing charge_only_mode)
8. try to improve touch sensitivity (build.prop)
9. clean some system apps/junks ( common/necessary gapps are reserved )
10.update moto IME from GB leak
11.improve network and voice (not sure)
12.fix sensor/GPS crash in 0906 version(replace 2nd-init with RC1.5)
Download Link: http://www.mirrorcreator.com/files/VMXNTP1B/All_in_One_Fix_for_CM7_and_MIUI_v2.0.7z_links
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1.bootmenu overclock
2./data formatting and restoring issue on CWM
3.CPU governors
4.light/gravity
5.keyboard mapping (QWERTY/Z)
6.GSM fix
7.keyboard backlight
8.camera upside down
9.dual way call recording
10.soft keyboard half size
11.random SD card mounting issue in CWM
12.charger light
13.compass
14.APN fix
15.share sd card / DATA function in bootmenu
16.300mhz fix
17.stock recovery fix
18.battery jumping
and also include tweaks and optimization：
1.enhanced sms and location info(ch)
2.moto IME
3.tweaks on framework and build.prop
4.optimized auto brightness
5.power profile
6.some scripts from wajk in /system/etc/init.d
7.full Gapps
Unsolved:
1.video decoding/encoding(720p recording)
2.enable 4-lv freq setting in bootmenu( a little edit in overclock.c)
3.share SD/data/system function in bootmenu are still buggy,sometimes is ok, sometimes not.
4.Alt-lock (I thinks we can ingore this)
5.battery charging(im not sure, but someone said the full voltage in stock 2.2 can reach 4200+ and down in 3100, in CM7 it only get 4160 and down in 3300)
Please use winrar3.50+ or latest 7zip to depack it.
Download link: http://www.mirrorcreator.com/files/IYOX37NY/fix-for-CM7_0.7z_links
Amazing share man!!! Thanks a lot!!!
The link does not work for me.
[Failed to open redirect file]
sahilarora911 said:
Amazing share man!!! Thanks a lot!!!
The link does not work for me.
[Failed to open redirect file]
Click to expand...
Click to collapse
My fault. I post the wrong link. I have updated a new one. Try again.
Endless7 said:
My fault. I post the wrong link. I have updated a new one. Try again.
Click to expand...
Click to collapse
Hey Endless, can you post what is missing/still needs fix?
r2beta0 said:
Hey Endless, can you post what is missing/still needs fix?
Click to expand...
Click to collapse
1.video decoding/encoding(720p recording)
2.enable 4-lv freq setting in bootmenu( a little edit in overclock.c)
3.share SD/data/system function in bootmenu are still buggy,sometimes is ok, sometimes not.
4.Alt-lock (I thinks we can ingore this)
5.battery charging(im not sure, but someone said the full voltage in stock 2.2 can reach 4200+ and down in 3100, in CM7 it only get 4160 and down in 3300)
Ah,for 720p recording. Jorixine send me a PM with a possible method. I try,but failed. But I still want to post here.
The fix is somewhere within media_profiles.xml and build.prop
media_profiles.xml can be edited as you please, even for making the HD videos to size lesser than normal
For it to work, in the build.prop you have to change the following:
ro.media.capture.maxres=5m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=60
ro.media.enc.hprof.vid.width=1280
ro.media.enc.hprof.vid.height=720
ro.media.capture.flash=led
ro.media.capture.useDFR=1
ro.media.capture.flashIntensity=42
ro.media.capture.torchIntensity=42
ro.media.capture.classification=classE
ro.mot.setuptype=1
ro.media.enc.aud.fileformat=3gp
ro.media.enc.aud.codec=amrnb
ro.media.enc.aud.bps=12200
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.dec.jpeg.memcap=20000000
r,o.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
He insists, recording 720p is working, the thing is that the phone reboots by itself a lot and some of those reboots are even when it never finished loading the OS, its very annoying.
Seems like the key question is to keep playing with these values. Moreover where it says ClassE, because in GB that comes as ClassH, but he changed it.
Maybe somebody with more expertise can playaround with these two files, get the correct configuration and avoid the rebooting issue.
Click to expand...
Click to collapse
Endless7 said:
Ah,for 720p recording. Jorixine send me a PM with a possible. I try,but failed. But I still want to post here.
Click to expand...
Click to collapse
I think we can make it work with the original camera application.<
Hey im the onlyone getting "unsupported compression method" on 7z¿
WeeDv2 said:
I think we can make it work with the original camera application.<
Hey im the onlyone getting "unsupported compression method" on 7z¿
Click to expand...
Click to collapse
Use winrar3.50 or latest 7zip. Because I use highest compress level.
I think I have fix the battery charging issue. Now I am on 4167 at 92%. No jumping during charing.
What about USB not working as in Stock? any update on that? i think its the MotoUSB.apk, ill try replacing it with stock USB.apk from Arg Movistar 2.2.2
(and yeah i already edited MIUI framework-res.apk)
Endless, your framework-res.apk included is the CM7 one right? cuz the one of MIUI usually is about 7 to 8 MB and your is 4/5 MB
WeeDv2 said:
What about USB not working as in Stock? any update on that? i think its the MotoUSB.apk, ill try replacing it with stock USB.apk from Arg Movistar 2.2.2
(and yeah i already edited MIUI framework-res.apk)
Endless, your framework-res.apk included is the CM7 one right? cuz the one of MIUI usually is about 7 to 8 MB and your is 4/5 MB
Click to expand...
Click to collapse
It's CM7 one.
word patch.
Very nice share Endless7 Thanks
Endless7 said:
I think I have fix the battery charging issue. Now I am on 4167 at 92%. No jumping during charing.
Click to expand...
Click to collapse
I too get to somewhere around there while charging but at 100% I get 4169mV I guess, but if I keep charging it after that it drops to 4134 mV something.
And the link is fine now, thanks!!
Endless7 said:
1.video decoding/encoding(720p recording)
2.enable 4-lv freq setting in bootmenu( a little edit in overclock.c)
3.share SD/data/system function in bootmenu are still buggy,sometimes is ok, sometimes not.
4.Alt-lock (I thinks we can ingore this)
5.battery charging(im not sure, but someone said the full voltage in stock 2.2 can reach 4200+ and down in 3100, in CM7 it only get 4160 and down in 3300)
Click to expand...
Click to collapse
So, have media playback besides mp3/mp4 been fixed?
Is this a complete CM7?
Because decompressed its only ~83 MB....
As the title says, they are fixes for applying on a defy's cm7 or miui, to make it work on milestone 2.
It's not a complete ROM.
ah ok and install logically in cwm "apply update from zip" ?
r2beta0 said:
So, have media playback besides mp3/mp4 been fixed?
Click to expand...
Click to collapse
No,this issue is described in 1th point as video decoding.And i think this also cause the 720p problem.
mj084 said:
ah ok and install logically in cwm "apply update from zip" ?
Click to expand...
Click to collapse
No,but you can overwrite cm7 package with this.
overwrite cm7 package with this....how?
Unofficial CM 10 with ac!d audio
Again this is 3n3rg1c with a new tweaked rom
Now off to race........................................................................................................................................................................................................
Code:
[b]What's in this rom?[/b]
[code]
*****Added various handpicked & custom tweaks
*****Ac!d audio with 2 addons (choose only one of Noozy or Awesome Beats)
*****CM File manager
******Apps inside system/apps folder are tweaked for low memory usage
******Trebuchet launcher is default launcher(Use this only for ever launcher now is of only 1.8 mb & uses only 12-15 mb ram on 3 drawers)
******Added 3 Additional themes ..
*******Quad score is 1200+
*******No lag while playing games such as Temple Run ,GTA 3(with audio folder),Modern combat.
[/CODE]
Code:
Whats working?
[code]
Everything, except
**Gps (Not tested but my friends reported it working fine)
**3g , Evdo (Not Tested)
Camera works with flash
[/code]
Code:
NOTE :: USB Debugging Works after 3-6 Reboots
DOWNLOADS
Code:
[b]Link to rom : New Build Is up[/b][HTML] THIS BUILD IS NOT RECOMMENDED BUT CAN BE TESTED.FOR STABLE BUILD SEE SECOND POST.
http://d-h.st/670
[/HTML]
[b]Link to Ac!d Addons : [/b]
[ADDON] (CHOOSE ONLY ONE!)
AC!D Noozxoide: [url]http://www.mediafire.com/?vv722521o22eq0g[/url]
AC!D Awesome Beats: [url]http://www.mediafire.com/?bjrnyd7k340h787[/url]
Installation
* Boot into recovery
* Bakup your current rom (In case some thing goes wrong)
* Wipe all & flash Rom.
* Flash Ac!d addons.
* Wipe Dalvik Cache.
* Reboot into Android (Boot may take long time for first time or two)
Note ::::: You may get BLACK SCREEN & it may take upto 2-10 Min to go to boot screen so dont panic let it boot & dont remove Battery
Click to expand...
Click to collapse
GAPPS (thanks to kfazz) : http://www.mediafire.com/file/6gm3mm7iyi775n6/gapps-jb-20120726-minimal-datainstall.zip
Hit thanks if you liked my work
Old Builds
Code:
http://d-h.st/fBO
Tweaks ; Use Seeder app if your game lags & dont set it on at boot as it may waste battery & turn off in app...
Use same settings as mine see attachments..
Use ondemand governer with 550 Mhz as min & 1200 as Max. (Use app like setcpu or Nofrills)
U can use swap partition of 8-256 mb with Ram Manager (I got swap better with ram manager with no swap partition )
Thanks to ::
Bionic Sources
Kfazz
Tweakz Scripts.
lambgx02
XDA
& me
hit thanks if you liked my work
Bug fix
Camera flash working.
R signal replaced by 3g
FM working .
If you have any problem let me know
Great! Will test! Gapps?
[Edit: Use Gapps from kfazz CM10. Works Perfectly]
Yes, which gapps should we use? The various JB gapps I have tried do not seem to be showing up on the device.
Everything works (with bugs)
Camera fc's after every photo but will show up in gallery[Edit: Very Selective. Wait for the FC pop up or it will show up in gallery as corrrupted pic]
Data (3G(Evdo)/1X) works but does not show upload/download on signal bars.
Have not tested GPS.
Unable to logcat
[Edit 3:03 pm Est - ADB shows device offline at all times]
[Edit Jan 5, 2013 10:16 am Est - GPS works (Tested using lockscreen weather). With Google Now the first two cards show up but you cannot scroll the cards. Only the search bar. Also Voice Search is unusable (Tries to initialize but it will say "Didn't catch that. Try speaking again." Each time)]
Will upload Screenshots later
Sent from my Droid running CM10 Port
SilverTipp said:
Yes, which gapps should we use? The various JB gapps I have tried do not seem to be showing up on the device.
Click to expand...
Click to collapse
Same, the 4.1.1 Gapps don't work for me. I can only log into my Google account but nothing else.
odj1041 said:
Everything works (with bugs)
Camera fc's after every photo but will show up in gallery
Data (3G(Evdo)/1X) works but does not show upload/download on signal bars.
Have not tested GPS.
Unable to logcat
[Edit 3:03 pm Est - ADB shows device offline at all times)
Will edit this post later
Sent from my Droid running CM10 Port
Click to expand...
Click to collapse
Thanks for the info I will try to fix it in next release USB Debugging works only @ time of booting & 5-10 seconds after booting working on a fix.
@ all who asked about gapps : I hope I get a fix in next release..
So the R that plagued your ICS rom is gone with the normal 3G sign in place, so yay for that! It seems as though your ACID audio (Both of them) don't play nice with your ROM. Nothing happens. Now, when I installed the AwesomeBeats zip I use for ROMs, that worked. The ACID and Dobly were still installed, dunno what they did. Actually I still don't know what they do, even with your ICS build. As far as everything else, so far it's the same problems as the fellow above stated. I'll get around to installing my Caffeinated Rattlesnake ringtone on this. I find anything else I'll let you know. Oh and it bootloops alot, though it did that with Kfazz build, but interestingly not in that Altonus Jelly ROM. His boots up just fine everytime.
Shredder87 said:
So the R that plagued your ICS rom is gone with the normal 3G sign in place, so yay for that! It seems as though your ACID audio (Both of them) don't play nice with your ROM. Nothing happens. Now, when I installed the AwesomeBeats zip I use for ROMs, that worked. The ACID and Dobly were still installed, dunno what they did. Actually I still don't know what they do, even with your ICS build. As far as everything else, so far it's the same problems as the fellow above stated. I'll get around to installing my Caffeinated Rattlesnake ringtone on this. I find anything else I'll let you know. Oh and it bootloops alot, though it did that with Kfazz build, but interestingly not in that Altonus Jelly ROM. His boots up just fine everytime.
Click to expand...
Click to collapse
Try a fresh flash wiping everything this time. (system, boot, data, cache, dalvik cache and sd-ext if you use that) Give the boot up at least 7 minutes.
odj1041 said:
Try a fresh flash wiping everything this time. (system, boot, data, cache, dalvik cache and sd-ext if you use that) Give the boot up at least 7 minutes.
Click to expand...
Click to collapse
I always full wipe. If you're talking about the bootlooping issue, it's like that with Kfazz build. It bootloops like 4-5 times then it catches on.
Dont have that problem here
Sent from my Sensation 4G with Beats Audio using xda app-developers app
Version?
Wow i'm going to try this, one question, it's JB 4.1.2 o 4.1.1? and this ROM have more languages than English?
Very nicely done. I've been running this for 24 hours now, and am again impressed with how well you've gotten a 4.x OS to run on the OGD! Primary functionality is there - phone, SMS, email - and it's good to see the uSD card is recognized now so that the camera works. Additionally, I was able to install gapps (and can now access my contacts...) and have Google Play Store functioning. Awesome!
Memory is limited, obviously, so installing Maps took a lot of what was left. GPS is good to go, but there is some delay in getting ptp directions set. Camera was a little delayed in finishing a job, as well. The only quirk I've seen so far is the WiFi Hotpot, which on the one hand is awesome in that it allows the OGD to offer a true infrastructure AP (instead of the usual Ad-Hoc AP), but it does not consistently start up. Probably hardware related, for obvious reasons, but there you have it.
Still, beautiful and smooth for what I need. I can easily use this as a daily driver, for now, so I'll see how it goes over the next few days. Great work! Thanks for offering it out to us!
Debugging works
Hello all & thanks for trying my ROM.
USB Debugging Works after 3-6 Reboots. Its working for me now
Shredder87 said:
So the R that plagued your ICS rom is gone with the normal 3G sign in place, so yay for that! It seems as though your ACID audio (Both of them) don't play nice with your ROM. Nothing happens. Now, when I installed the AwesomeBeats zip I use for ROMs, that worked. The ACID and Dobly were still installed, dunno what they did. Actually I still don't know what they do, even with your ICS build. As far as everything else, so far it's the same problems as the fellow above stated. I'll get around to installing my Caffeinated Rattlesnake ringtone on this. I find anything else I'll let you know. Oh and it bootloops alot, though it did that with Kfazz build, but interestingly not in that Altonus Jelly ROM. His boots up just fine everytime.
Click to expand...
Click to collapse
Use a different kernel like kfazz JB safe one,,,,,,, But default kernel is a beast
Now the acid audio just plug in CM 10 JB by kfazz or Eman and listen music in head phones & speaker without any sound mods. now use my Rom which has AC!D baked in. you can find difference For better USE Noozy addon & inside noozyoxide app line out audio Use EQ preset as unique 3 ,VE engine to weak &VSUR to Live (first one) . AVLS works only when using other music player than NOOZY...
In settings>>sound>>Music effects>>choose Noozxoide....
Just a tip..... I like this with my headphones & yes headphone quality also matters .................
@ adverbius :: thanks for input but can you pm me link for gapps you used ????????????
@ chemahg7 :: Nope currently English only to get other languages to work I need to decompile framework & service & messout there
enjoyyyyyyyyy
3n3rg1c said:
Use a different kernel like kfazz JB safe one,,,,,,, But default kernel is a beast
Now the acid audio just plug in CM 10 JB by kfazz or Eman and listen music in head phones & speaker without any sound mods. now use my Rom which has AC!D baked in. you can find difference For better USE Noozy addon & inside noozyoxide app line out audio Use EQ preset as unique 3 ,VE engine to weak &VSUR to Live (first one) . AVLS works only when using other music player than NOOZY...
In settings>>sound>>Music effects>>choose Noozxoide....
Just a tip..... I like this with my headphones & yes headphone quality also matters .................
Click to expand...
Click to collapse
I should've been more specific. Clean wipe, each time. Cleared dalvic afterwards. Always check it on music effects. (Been doing this since I found Awesome beats months ago.) There is no audio enhancements when I use them. I put the bass boost on Awesome Beats, mess with the equalizer, ect. Nothing happens. Loaded up the Noozyoxide one, again, nothing happens. Put on that SRS enhancement, audiophile, equalizer, nothing. When I put the vanilla awesome beats one after a clean wipe without installing the ACID ones is when the enhancement kicks in. ACID is still there so I guess its working in tandem with vanilla?
So I did a fresh wipe and reflashed Altonus JB, this time with ACIDS sound mod see if it was just ACID acting like a jerk but ACID Awesomebeats/Noozyoxide actually work with that ROM. I dunno what else to tell you? Maybe it's a permissions issue that's not letting it happen? I could be the only one. It was working for me in your ICS rom.
Radio
Radio is not working like the kfazz's ROM
@ chemahg7 : Ok let me check it.. Can you provide me logcat.
@ ALL who is using the rom....: >>>>> Just download Rom manage & fix permission in that . I found Permission Glitch in rom ...