Hey! i've been looking all over google and the KDE website for a solution on how to install and use Plasma Active 3 on my galaxy tab 2 7".
It should be possible to use and install on the tablet, however i cannot find the solution on HOW to install it. If anyone knows please let me know.
Thanks!
igual
Sebastianito said:
Hey! i've been looking all over google and the KDE website for a solution on how to install and use Plasma Active 3 on my galaxy tab 2 7".
It should be possible to use and install on the tablet, however i cannot find the solution on HOW to install it. If anyone knows please let me know.
Thanks!
Click to expand...
Click to collapse
Llegué acá buscando exactamente lo mismo, aunque la mía es de 10.1"
Greeting from Rapture!!
Ola disculpen tengo un lg g2 AT&t y no tengo la opción de bloqueo knock code
Alguien que tenga el archivo apk o la ROM stock completa del modelo d800 saludos
Moderator Translation...Please post in English!
Ola sorry I have a g2 lg AT & T and I have the option of blocking knock code
Someone who has the apk file or complete stock ROM model d800 greetings
Please help !! Lg [email protected] at&t cwm 6.0.5.0
AT&T LG G2 D800 <<<
Hey guys I need some help i did the AT&T ota Update after putting the stock rom on the device, i have all roms of liquid smooth
Im stuck in CWM Bootloop no matter which rom and gapps install I dont know what to do Please help ive wiped factory/data/reset
Ive done Wipe cache Partition
And then dalvik cache what am i doing wrong all roms will install and act okay as if its about to boot and as sooon as it gets past the LG logo screen it shoots right back into CWM and for some reason in my phone i also have TWRP dont know if that helps what i need to fix this
This would be my 3rd phone from AT&t And 2-300$ is getting expensive
Please help I know im a noob and ive tried everything i can comprehend , I hope someone could do like a how to dummy tutorial on CWM and TWRP of how they work and what each selection does rather than the basic run down of quick installs , cause for people like me thats complete retards i just might need a full walkthru and im sure im not the only one thats had this problem, Any help will do thanks guys
Roms
LS-KK-v3.0-2014 03-31 d800
Cm-11 2014504 snapshot -m6 --d800
Cm-11 20140720 NIGHTLY-d800
Gapps -kk-20140606
Liquidsmooth_3.0-20140331
5-31_GApps_Standards_4.2.2_
ATT-Stock-Rooted-D80020k
Good morning
how to ROOT the tablet - Asus TX201LAF-CQ004DW
I try desperately is it possible ?
Many thanks
Hi, the TX201LA has already been rooted http://www.transformerforums.com/fo...-root-asus-transformer-book-trio-tx201la.html
Also, are you running android 4.4.? It would be great if you could provide me with a system partition dump to port it for the Asus Trio TX201LA model.
Sent from my Xperia Z using Tapatalk
Good morning PaintballerAlex07,
With current 4.2.2 kitkat I already tried the root TX201LA-CQ003H but not working
my tablet is : Asus TX201LAF-CQ004DW
Excuse me for my small English !
Many thanks
manaari said:
Good morning PaintballerAlex07,
With current 4.2.2 kitkat I already tried the root TX201LA-CQ003H but not working
my tablet is : Asus TX201LAF-CQ004DW
Excuse me for my small English !
Many thanks
Click to expand...
Click to collapse
Bonjour
J'ai la même tablette que toi, j'aimerais la rooter. As tu réussi?
Hi All
I recently got into the flashing community and I have tried a few time to flash my Doogee Mix, I overcame most of the problems but this one I am not able to understand, has anyone seen this before?
Here is the log:
09/07/2017 11:12:43.961 FlashTool[5868][8792][D]: USBSetting::Search(): Scaning USB port succeeded!(..\..\flashtool\Conn\USBSetting.cpp,139)
09/07/2017 11:12:43.961 FlashTool[5868][8792][D]: APCore::ConnMediaUSB:reConnect(): USB port detected: \\?\usb#vid_0e8d&pid_0003#5&16b1ae89&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}(..\..\flashtool\Conn\ConnMedia.cpp,68)
09/07/2017 11:12:44.022 FlashTool[5868][8792][D]: APCore::Connection::ConnectBROM(): BROM connected(..\..\flashtool\Conn\Connection.cpp,80)
09/07/2017 11:12:44.023 FlashTool[5868][8792][D]: APCore::Connection::ConnectDA(): Downloading & Connecting to DA...(..\..\flashtool\Conn\Connection.cpp,111)
09/07/2017 11:12:44.023 FlashTool[5868][8792][D]: APCore::Connection::ConnectDA(): connect DA end stage: 2, enable DRAM in 1st DA: 0(..\..\flashtool\Conn\Connection.cpp,115)
09/07/2017 11:12:46.198 FlashTool[5868][8792][D]: APCore::Connection::ConnectDA(): Failed to Connect DA: STATUS_DA_HASH_MISMATCH(..\..\flashtool\Conn\Connection.cpp,130)
09/07/2017 11:12:46.198 FlashTool[5868][8792][D]: APCore::Connection:isconnect(): Disconnect!(..\..\flashtool\Conn\Connection.cpp,140)
09/07/2017 11:12:46.202 FlashTool[5868][8792][D]: BackgroundWorker::run(): BROM Exception! ( ERROR : STATUS_DA_HASH_MISMATCH (0xC0070004)
[HINT]:
)((APCore::Connection::ConnectDA,..\..\flashtool\Conn\Connection.cpp,131))(..\..\flashtool\UI\src\BackgroundWorker.cpp,95)
What does the actual hash comparing exactly?
Thanks all!
AJJ_ABR said:
Hi All
I recently got into the flashing community and I have tried a few time to flash my Doogee Mix, I overcame most of the problems but this one I am not able to understand, has anyone seen this before?
Here is the log:
09/07/2017 11:12:43.961 FlashTool[5868][8792][D]: USBSetting::Search(): Scaning USB port succeeded!(..\..\flashtool\Conn\USBSetting.cpp,139)
09/07/2017 11:12:43.961 FlashTool[5868][8792][D]: APCore::ConnMediaUSB:reConnect(): USB port detected: \\?\usb#vid_0e8d&pid_0003#5&16b1ae89&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}(..\..\flashtool\Conn\ConnMedia.cpp,68)
09/07/2017 11:12:44.022 FlashTool[5868][8792][D]: APCore::Connection::ConnectBROM(): BROM connected(..\..\flashtool\Conn\Connection.cpp,80)
09/07/2017 11:12:44.023 FlashTool[5868][8792][D]: APCore::Connection::ConnectDA(): Downloading & Connecting to DA...(..\..\flashtool\Conn\Connection.cpp,111)
09/07/2017 11:12:44.023 FlashTool[5868][8792][D]: APCore::Connection::ConnectDA(): connect DA end stage: 2, enable DRAM in 1st DA: 0(..\..\flashtool\Conn\Connection.cpp,115)
09/07/2017 11:12:46.198 FlashTool[5868][8792][D]: APCore::Connection::ConnectDA(): Failed to Connect DA: STATUS_DA_HASH_MISMATCH(..\..\flashtool\Conn\Connection.cpp,130)
09/07/2017 11:12:46.198 FlashTool[5868][8792][D]: APCore::Connection:isconnect(): Disconnect!(..\..\flashtool\Conn\Connection.cpp,140)
09/07/2017 11:12:46.202 FlashTool[5868][8792][D]: BackgroundWorker::run(): BROM Exception! ( ERROR : STATUS_DA_HASH_MISMATCH (0xC0070004)
[HINT]:
)((APCore::Connection::ConnectDA,..\..\flashtool\Conn\Connection.cpp,131))(..\..\flashtool\UI\src\BackgroundWorker.cpp,95)
What does the actual hash comparing exactly?
Thanks all!
Click to expand...
Click to collapse
I'm assuming DA means Download Agent. DA mismatch probably means the file you selected is incompatible or you having a folder placement or selection issue.
Try these links for the errors and solutions
http://www.gizmoadvices.com/list-sp-flash-tool-error-codes-solution-fix/
https://forum.hovatek.com/thread-439.html
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Solved
Hi All
So the issue was due to myself trying to flash the 4GB/64GB Image onto what is actually a 6GB/64GB Device.
There is no easy identifiable marks on this device to denote which one it is and the existing rom had memory as 4GB, so all good now.
Hope this helps others.
ayuda!!
AJJ_ABR said:
Hi All
So the issue was due to myself trying to flash the 4GB/64GB Image onto what is actually a 6GB/64GB Device.
There is no easy identifiable marks on this device to denote which one it is and the existing rom had memory as 4GB, so all good now.
Hope this helps others.
Click to expand...
Click to collapse
me podrias ayudar ya que mio celular se quedo de brick, quise hacerle root a mi s60 de 6 ram y 64 rom
creo que me paso lo mismo que a ti, porque lo flashé con el scatter de otro modelo...porfavor ayudame
:crying::crying::crying::crying:
SEALSDAVID said:
me podrias ayudar ya que mio celular se quedo de brick, quise hacerle root a mi s60 de 6 ram y 64 rom
creo que me paso lo mismo que a ti, porque lo flashé con el scatter de otro modelo...porfavor ayudame
:crying::crying::crying::crying:
Click to expand...
Click to collapse
En Ingles porfavor, the forum rules state that you can post in your native language but you must post the English translation at the top then post in your native language below that.
Sent from my LGL84VL using Tapatalk
help!!
Droidriven said:
En Ingles porfavor, the forum rules state that you can post in your native language but you must post the English translation at the top then post in your native language below that.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
you could help me since my cell phone stayed brick, I wanted to root my s60 of 6 ram and 64 rom
I think the same thing happened to you, because I flashed it with another model's scatter ... please help me
SEALSDAVID said:
you could help me since my cell phone stayed brick, I wanted to root my s60 of 6 ram and 64 rom
I think the same thing happened to you, because I flashed it with another model's scatter ... please help me
Click to expand...
Click to collapse
No, I don't own that device.
Try doing a Google search for:
"Unbrick (your model number)"
If the tools and files exist to fix your device, that will find it, it won't be easy and you won't find a quick and simple answer. You re going to have to do a good bit of research and reading, do not attempt to fix your device until you understand the information that you find.
Sent from my LGL84VL using Tapatalk
Hello everybody
I need to service to bypass mac book air m1, I'm forget my apple id
please give me a service to unlock apple id
i have same probleme with my macbook a2337 .did you find a solution?
fellahamine said:
Tengo el mismo problema con mi macbook a2337. ¿Encontraste una solución?
Click to expand...
Click to collapse
Alguna novedad?
PLEASE find a solution also for me, with th esame device A2337